D1-098-GiroDisc Replacement Brake Rotor Rings for Audi & Lamborghini 1 "a"

$1,222.00

D1-098-GiroDisc Replacement Brake Rotor Rings for Audi & Lamborghini

$1,222.00
Product Description:

GiroDisc Replacement Brake Rotor Rings for Audi & Lamborghini - D1-098

GiroDisc racing brakes hero image featuring a black Porsche-style sports car from a front three-quarter angle, glowing orange front brake rotor, GiroDisc brake caliper, and dramatic wet nighttime racetrack with sparks and water spray.

Maintain your high-performance braking system with GiroDisc D1-098 Replacement Brake Rotor Rings. Designed for select Audi and Lamborghini applications equipped with compatible GiroDisc rotor assemblies, these replacement friction rings provide a serviceable solution for worn brake rotor surfaces without requiring complete new rotor assemblies.

The GiroDisc D1-098 is used in several specialized braking applications, including Audi A4, S4, A6, allroad, and RS6 models, along with select Lamborghini Diablo and Murciélago configurations. Depending on the vehicle and brake system, the D1-098 may be used on the front or rear axle.

Important: D1-098 is not a universal replacement ring for every Audi or Lamborghini. Compatibility depends on the specific GiroDisc rotor assembly, brake caliper configuration, rotor dimensions, and mounting hardware. Confirm your existing rotor part number before ordering.

High-Performance Replacement Rotor Rings for Audi & Lamborghini

The GiroDisc D1-098 Replacement Rings are intended for use with compatible GiroDisc brake rotor assemblies on select performance vehicles.

GiroDisc's serviceable rotor systems allow worn iron friction rings to be replaced independently of their mounting hats, provided the hats and associated hardware remain in suitable condition.

This design is particularly beneficial for performance enthusiasts who frequently service their brakes due to demanding street driving, track-day use, or motorsport applications.

The D1-098 is listed across multiple vehicle applications in the GiroDisc application guide. Its correct installation position and compatible rotor assembly vary by vehicle.

GiroDisc D1-098 Replacement Ring Features

  • Multiple Vehicle Applications: Listed for select Audi and Lamborghini performance models.
  • Front and Rear Compatibility: Used in front rotor applications and one specifically listed rear rotor application.
  • Replacement Friction Rings: Intended to replace worn friction surfaces on compatible GiroDisc rotor assemblies.
  • Serviceable Rotor System: Allows compatible mounting hats to be retained when they remain in suitable condition.
  • Performance Brake Applications: Listed for specialized factory and aftermarket braking configurations.
  • Vehicle-Specific Fitment: Compatibility determined by the existing rotor assembly and brake configuration.
  • Compatible GiroDisc Assemblies: Listed with A1-053, A1-034, A1-098, and A2-097.
  • Specialized Audi Fitments: Includes certain Alcon/StopTech configurations and RS6 applications using spacers.
  • Lamborghini Applications: Includes specific Diablo and Murciélago braking configurations.
  • Replacement Component: Not a complete brake rotor assembly with new mounting hats.

Technical Specifications

  • Manufacturer: GiroDisc
  • Part Number: D1-098
  • Product Type: Replacement Brake Rotor Rings
  • Vehicle Manufacturers: Audi / Lamborghini
  • Brake Position: Front or Rear Depending on Application
  • Compatible Front Rotor Assemblies: A1-053, A1-034, A1-098
  • Compatible Rear Rotor Assembly: A2-097
  • Audi Alcon/StopTech Application: 355 x 32mm Brake Configuration
  • Audi RS6 C5 Application: 380mm Configuration with Spacers
  • Replacement Component: Friction Rings
  • Mounting Hats: Existing Compatible Hats Required
  • Fitment Verification: Required Before Ordering

Vehicle Fitment

According to the GiroDisc 2026 US Application Guide, the GiroDisc D1-098 Replacement Rotor Rings are listed for the following applications:

Audi Front Brake Applications

  • Audi A4 (B6/B7), 2000-2009: Front replacement rings for the Alcon/StopTech 355 x 32mm brake configuration. Compatible GiroDisc rotor assembly: A1-053.
  • Audi S4 (B5/B6/B7), 1997-2009: Front replacement rings for the Alcon/StopTech 355 x 32mm brake configuration. Compatible GiroDisc rotor assembly: A1-053.
  • Audi A6 / allroad (C5), 1997-2004: Front replacement rings for the Alcon/StopTech 355 x 32mm brake configuration. Compatible GiroDisc rotor assembly: A1-053.
  • Audi RS6 (C5), 2002-2004: Front replacement rings for the 380mm brake configuration with spacers. Compatible GiroDisc rotor assembly: A1-034.

Lamborghini Front Brake Applications

  • Lamborghini Diablo, 1999-2001: Facelift models equipped with Brembo calipers. Compatible GiroDisc front rotor assembly: A1-098.
  • Lamborghini Murciélago, 2002-2004: Models equipped with 4-piston front brake calipers. Compatible GiroDisc front rotor assembly: A1-098.

Lamborghini Rear Brake Application

  • Lamborghini Murciélago, 2005-2010: Rear replacement rings for vehicles equipped with the corresponding GiroDisc A2-097 rear rotor assembly. This application is listed alongside the 8-piston front caliper configuration.

Important Fitment Note: D1-098 appears in both the front and rear replacement ring columns of the GiroDisc application guide. Do not assume the part number is exclusively for front brake applications.

Vehicle model and year alone do not guarantee compatibility. Confirm your GiroDisc rotor assembly part number and brake configuration before ordering.

Replacement Rings for Audi Alcon & StopTech Brake Systems

The GiroDisc D1-098 is listed as a replacement friction ring for several Audi models using the specified Alcon/StopTech 355 x 32mm brake configuration.

These applications include select Audi A4, S4, A6, and allroad models equipped with the corresponding GiroDisc A1-053 front rotor assemblies.

Because aftermarket brake systems can vary in rotor dimensions, hat design, and mounting hardware, identifying the exact existing assembly is essential.

The D1-098 should not be assumed compatible with every Alcon or StopTech brake kit simply because the rotor dimensions are similar.

Audi RS6 C5 Front Replacement Ring Application

For the 2002-2004 Audi RS6 (C5), the GiroDisc application guide lists D1-098 as the front replacement ring for the A1-034 rotor configuration.

This application is identified as a 380mm configuration requiring spacers.

Proper spacer configuration, mounting hardware, and rotor fitment must be verified before installation.

Compatibility with newer C6, C7, or C8 Audi RS6 braking systems should not be assumed.

Lamborghini Diablo & Murciélago Replacement Ring Applications

The GiroDisc D1-098 is also listed for specialized Lamborghini brake rotor applications.

For the 1999-2001 Lamborghini Diablo facelift with Brembo calipers, the D1-098 is specified as the front replacement ring for the GiroDisc A1-098 rotor assembly.

The same front replacement ring is listed for the 2002-2004 Lamborghini Murciélago with 4-piston front calipers, also using the A1-098 assembly.

Additionally, the D1-098 is listed as a rear replacement ring for the 2005-2010 Lamborghini Murciélago equipped with the GiroDisc A2-097 rear rotor assembly.

These applications demonstrate why brake position and existing rotor identification are essential when selecting replacement friction rings.

Serviceable GiroDisc Brake Rotor Construction

GiroDisc's serviceable rotor systems provide the ability to replace worn friction rings independently of the mounting hats.

When the friction surfaces reach the manufacturer's specified service limits, compatible replacement rings can be installed while retaining mounting hats that remain in proper condition.

Before replacing friction rings, inspect all mounting components for wear, corrosion, cracks, distortion, and other damage.

Follow the correct GiroDisc assembly instructions and use the appropriate replacement hardware for the specific rotor application.

Installation & Brake System Compatibility

Because GiroDisc D1-098 is used across multiple brake configurations, proper identification of the existing rotor assembly is especially important.

Confirm the following before ordering or installing replacement rings:

  • The exact GiroDisc rotor assembly part number.
  • Whether the application is for the front or rear axle.
  • The existing rotor diameter and thickness.
  • The brake caliper configuration.
  • The required mounting hat and hardware specifications.
  • Any application-specific spacers or mounting requirements.
  • The condition of the existing mounting hats.

Installation should follow GiroDisc's service procedures and be performed by a qualified technician familiar with performance brake systems.

Frequently Asked Questions

What vehicles use GiroDisc D1-098 replacement rings?

The D1-098 is listed for select Audi A4, S4, A6, allroad, and RS6 applications, along with specific Lamborghini Diablo and Murciélago brake configurations. Compatibility depends on the installed GiroDisc rotor assembly.

Are GiroDisc D1-098 rings for the front or rear brakes?

Both, depending on the vehicle. D1-098 is used for several front rotor applications and as a rear replacement ring for the 2005-2010 Lamborghini Murciélago with GiroDisc A2-097 rotors.

Will D1-098 fit my Audi A4 with Alcon or StopTech brakes?

The GiroDisc application guide lists D1-098 for the 2000-2009 Audi A4 B6/B7 with the specified Alcon/StopTech 355 x 32mm configuration using GiroDisc A1-053 front rotors.

Will D1-098 fit an Audi S4?

Yes, for the listed 1997-2009 B5/B6/B7 S4 application equipped with the specified Alcon/StopTech 355 x 32mm brake configuration and GiroDisc A1-053 front rotor assemblies.

Is D1-098 compatible with the Audi RS6 C5?

Yes. The application guide lists D1-098 for the 2002-2004 Audi RS6 C5 front rotor configuration using GiroDisc A1-034 with the specified 380mm spacer arrangement.

Will D1-098 fit a Lamborghini Diablo?

Yes. The D1-098 is listed for the 1999-2001 Lamborghini Diablo facelift equipped with Brembo calipers and GiroDisc A1-098 front rotor assemblies.

Which Lamborghini Murciélago models use D1-098?

The D1-098 is listed for the front of 2002-2004 Murciélago models equipped with 4-piston front calipers and A1-098 rotors. It is also listed for the rear of 2005-2010 Murciélago models using GiroDisc A2-097 rotors.

Which complete GiroDisc rotor assemblies use D1-098?

The 2026 GiroDisc application guide associates D1-098 with front rotor assemblies A1-053, A1-034, and A1-098, as well as rear rotor assembly A2-097.

Are D1-098 replacement rings complete brake rotors?

No. D1-098 identifies replacement friction rings intended for compatible existing rotor assemblies. Complete rotor assemblies with new mounting hats are separate products.

Can I reuse my existing GiroDisc mounting hats?

Compatible GiroDisc mounting hats may be reused if they remain serviceable and meet the manufacturer's inspection requirements.

Do all D1-098 applications use the same rotor diameter?

No. The application guide lists different brake configurations, including a 355 x 32mm Alcon/StopTech application and a 380mm Audi RS6 configuration with spacers. Verify the complete rotor assembly and application-specific requirements.

Can D1-098 be installed on a factory brake system without GiroDisc rotors?

Compatibility with factory rotor hats or unrelated aftermarket brake systems should not be assumed. D1-098 must be matched to the correct rotor assembly and mounting configuration.

How do I confirm the correct replacement rings?

Identify the existing GiroDisc rotor assembly part number, vehicle application, brake position, and caliper configuration. Contact Competition Motorsport if assistance is needed confirming compatibility.

Maintain Your Audi or Lamborghini Braking System with GiroDisc

The GiroDisc D1-098 Replacement Brake Rotor Rings provide a specialized service solution for select Audi and Lamborghini braking systems.

Whether you're maintaining an Audi equipped with Alcon/StopTech brakes, servicing a C5 RS6, or replacing worn friction rings on a Lamborghini Diablo or Murciélago, the D1-098 offers a replacement option for the compatible GiroDisc rotor assemblies.

Important: Confirm the existing rotor assembly, brake position, and mounting requirements before ordering. D1-098 is used across multiple applications and is not a universal fit for every vehicle listed.

The Ultimate Auto Racing Helmet Buyer's Guide

We’ve sold tens of thousands of helmets here at Competition Motorsport and, in the process of doing that, answered a million questions (probably) about them. With that in mind, this article will give you the real lowdown on selecting a proper auto racing helmet. We’ll go over the why’s and how’s of size, shape, certification, pricing, features, and maintenance so you have the tools you need to select the perfect helmet.

Learn More

Driver Gear

If you wear it to protect yourself while racing, the Competition Motorsport Driver Gear collection is where you'll find it!

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the Competition Motorsport Racecar Gear collection is where you'll find it!

American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa