GiroDisc A2-300 Rear Brake Iron Rotor Conversion for McLaren Senna

Upgrade the braking system of your McLaren Senna with GiroDisc A2-300 Two-Piece Floating Rear Brake Rotors. Engineered specifically for converting the factory carbon-ceramic braking system to high-performance iron rotors, these precision-manufactured rear brake assemblies deliver exceptional heat management, serviceable construction, and consistent braking performance for demanding street and track applications.
The GiroDisc A2-300 rear iron conversion system combines proprietary high-carbon iron friction rings with lightweight 6061-T6 aluminum mounting hats and fully floating hardware. Designed to work with the factory McLaren Senna rear brake calipers, these assemblies offer an alternative to replacing expensive OEM carbon-ceramic rotor assemblies while retaining the vehicle's original caliper configuration.
McLaren Senna Rear Carbon-Ceramic to Iron Brake Conversion
The GiroDisc A2-300 Rear Rotor Assemblies are designed for McLaren Senna owners seeking a serviceable iron brake rotor alternative to the factory carbon-ceramic system.
Unlike conventional one-piece iron brake rotors, GiroDisc utilizes a two-piece construction with a high-carbon iron friction ring mounted to a lightweight aluminum hat. This design allows the iron ring and aluminum hat to expand at different rates under high braking temperatures, reducing thermal stress within the assembly.
The fully floating mounting system accommodates controlled movement between the rotor ring and hat while maintaining the correct alignment with the factory brake calipers.
For McLaren Senna owners who participate in regular track days, high-performance driving events, or competitive motorsport activities, the GiroDisc iron conversion offers a serviceable braking solution with replaceable friction rings and performance-focused cooling technology.
GiroDisc A2-300 Rear Brake Rotor Features
-
McLaren Senna-Specific Application: Engineered for the McLaren Senna rear braking system.
-
Carbon-Ceramic to Iron Conversion: Replaces factory carbon-ceramic rear brake rotors with high-performance iron assemblies.
-
Factory Caliper Compatibility: Designed to retain the original McLaren Senna rear brake calipers.
-
Two-Piece Floating Construction: Combines high-carbon iron friction rings with lightweight aluminum hats.
-
Proprietary High-Carbon Iron: Performance-oriented friction material engineered for repeated high-temperature braking.
-
72 Curved Cooling Vanes: Internal cooling passages help dissipate heat during aggressive braking.
-
6061-T6 Aluminum Hats: Precision-machined aluminum mounting hats help reduce unnecessary rotating mass.
-
Black Anodized Finish: Corrosion-resistant finish protects the aluminum hats.
-
High-Strength Drive Pins: Steel alloy mounting hardware connects the friction rings to the aluminum hats.
-
Fully Floating Mounting System: Allows controlled differential thermal expansion between the rotor components.
-
Spring Clips & Belleville Washers: Help control floating hardware movement and minimize unwanted street-driving noise.
-
Serviceable Friction Rings: Worn iron rotor rings can be replaced independently of the aluminum hats.
-
Slotted Friction Surface: Provides a performance-oriented brake contact surface.
-
American Manufacturing: Major rotor components are manufactured by GiroDisc in Bellingham, Washington.
GiroDisc A2-300 Rear Brake Rotor Specifications
-
Manufacturer: GiroDisc
-
Part Number: A2-300
-
Product Type: Two-Piece Floating Rear Brake Rotor Assemblies
-
Vehicle Application: McLaren Senna
-
Model Years: 2019+
-
Brake Position: Rear
-
Brake Conversion: Carbon-Ceramic to Iron
-
Rotor Construction: Two-Piece Fully Floating
-
Rotor Surface: Slotted
-
Rotor Ring Material: Proprietary High-Carbon Iron
-
Rotor Hat Material: 6061-T6 Aluminum
-
Rotor Hat Finish: Black Anodized
-
Internal Cooling Vanes: 72 Curved Vanes
-
Drive Pin Material: High-Strength Steel Alloy
-
Drive Pin Finish: Cadmium Plated
-
Mounting Hardware: Spring Clips and Belleville Washers
-
Caliper Compatibility: Factory McLaren Senna Rear Calipers
-
Brake Pads: Compatible Iron-Rotor Pad Compound Required
-
Replacement Friction Rings: GiroDisc D2-206
-
Quantity: Pair of Rear Rotor Assemblies
-
Manufacturing Location: Bellingham, Washington, USA
GiroDisc A2-300 Rear Brake Rotor Fitment Guide
McLaren Senna (2019)
Important Fitment Note: These rotors are specifically designed for the McLaren Senna iron conversion application.
Brake Pad Requirement: Converting from carbon-ceramic to iron rotors requires brake pads with friction material compatible with iron rotor surfaces. Do not reuse carbon-ceramic-specific brake pads unless the pad manufacturer explicitly confirms compatibility.
High-Carbon Iron Technology & Advanced Rotor Cooling
GiroDisc manufactures its performance rotor rings using a proprietary high-carbon iron casting formulated specifically for demanding braking environments.
During aggressive braking, the vehicle's kinetic energy is converted into heat. Consistent heat dissipation is essential for managing brake temperatures and maintaining reliable braking performance during repeated high-speed stops.
The GiroDisc A2-300 incorporates 72 internal curved cooling vanes designed to act as a centrifugal pump as the rotor rotates.
These ventilation channels draw air through the rotor assembly, helping remove heat from the friction ring during heavy braking.
Combined with the high-carbon iron construction, this advanced cooling design supports the thermal management requirements of the McLaren Senna's high-performance rear braking system.
Fully Floating Two-Piece Construction
The GiroDisc A2-300 features a fully floating rotor design engineered to accommodate the thermal expansion associated with high-performance braking.
Each assembly consists of a high-carbon iron friction ring attached to a precision-machined aluminum mounting hat using high-strength steel drive pins.
As braking temperatures increase, the iron friction ring expands differently from the aluminum hat. The floating mounting hardware allows controlled movement between the components while maintaining rotor alignment.
Spring clips and Belleville washers help manage rotor movement and reduce unwanted hardware noise during normal street operation.
The result is a sophisticated, serviceable brake rotor assembly designed for both demanding performance driving and street use.
Retain Your Factory McLaren Senna Rear Brake Calipers
The GiroDisc A2-300 conversion is designed to utilize the McLaren Senna's original rear brake calipers.
This allows owners to replace the factory carbon-ceramic rotor assemblies with GiroDisc's fully floating iron rotor system without requiring aftermarket rear calipers.
The conversion requires compatible iron-rotor brake pads to ensure correct friction characteristics and rotor compatibility.
Installation Note: Follow GiroDisc and McLaren installation procedures. Verify brake pad compatibility, rotor clearances, mounting hardware, and braking operation before driving.
When converting the complete vehicle from carbon-ceramic to iron rotors, ensure the front and rear braking configurations use appropriate components and compatible friction materials.
Reusable Aluminum Hats & GiroDisc D2-206 Replacement Rings
One of the primary advantages of the GiroDisc A2-300 system is its serviceable two-piece design.
Unlike one-piece brake rotors or complete carbon-ceramic rotor assemblies, GiroDisc allows the iron friction rings to be replaced independently of the aluminum mounting hats.
When the friction rings become worn, compatible GiroDisc D2-206 Rear Replacement Rings can be installed while retaining the existing aluminum hats, provided the hats remain in serviceable condition.
Compatible Replacement Rings: GiroDisc D2-206
Replacement ring service should follow the manufacturer's specified minimum thickness, crack inspection criteria, and hardware replacement procedures.
Always inspect aluminum hats, drive pins, and related mounting components before reassembly.
GiroDisc A2-300 Rear Brake Rotor FAQs
Will GiroDisc A2-300 rear rotors fit my McLaren Senna?
Yes. The GiroDisc A2-300 rear brake rotor assemblies are designed for the McLaren Senna iron brake conversion application. Verify your vehicle's brake configuration before purchasing.
Are GiroDisc A2-300 rotors for the front or rear?
The GiroDisc A2-300 assemblies are specifically designed for the rear axle. The corresponding McLaren Senna front iron conversion is available separately under GiroDisc part number A1-300.
Do these rotors convert the McLaren Senna from carbon-ceramic to iron brakes?
Yes. The GiroDisc A2-300 is designed to replace the original carbon-ceramic rear brake rotors with high-performance iron rotor assemblies while retaining the factory rear brake calipers.
Can I keep my factory McLaren Senna brake calipers?
Yes. The A2-300 rear iron conversion is engineered to operate with the original McLaren Senna rear calipers. Compatible iron-rotor brake pads are required.
Can I reuse my original carbon-ceramic brake pads?
Do not assume the original pads are compatible with iron rotors. Select brake pads specifically approved for use with the GiroDisc iron conversion and the McLaren Senna rear calipers.
Are GiroDisc A2-300 rear rotors fully floating?
Yes. These rear rotor assemblies utilize a fully floating two-piece design with high-strength steel drive pins, spring clips, and Belleville washers to accommodate thermal expansion.
How many cooling vanes do the GiroDisc A2-300 rear rotors have?
Published technical information describes 72 curved internal cooling vanes designed to help dissipate heat during high-performance braking.
Can I replace the rotor rings without buying new aluminum hats?
Yes. The GiroDisc A2-300 features reusable aluminum hats. Compatible replacement friction rings can be installed when the originals become worn, provided the hats remain suitable for continued use.
Which replacement rotor rings fit the GiroDisc A2-300?
The GiroDisc D2-206 rear replacement rings are listed for use with the McLaren Senna A2-300 rear rotor assemblies.
Are these rotors suitable for track-day driving?
Yes. The high-carbon iron friction rings, curved cooling vanes, and fully floating construction are designed for demanding performance applications. Proper brake pad selection, brake fluid, and routine system inspection remain essential for track use.
Are GiroDisc A2-300 rear rotors sold individually or as a pair?
The GiroDisc A2-300 rear brake rotor assemblies are sold as a pair, providing the left and right rear rotors.
Where are GiroDisc brake rotors manufactured?
GiroDisc manufactures its major rotor components, including aluminum hats, iron friction rings, and drive pins, at its facility in Bellingham, Washington, USA.
Upgrade Your McLaren Senna with GiroDisc Rear Iron Brake Rotors
For McLaren Senna owners seeking an alternative to the factory carbon-ceramic rear brake system, GiroDisc A2-300 Two-Piece Floating Rear Brake Rotors provide a precision-engineered, serviceable iron conversion solution.
Featuring high-carbon iron friction rings, reusable aluminum mounting hats, advanced cooling technology, and factory caliper compatibility, GiroDisc delivers a performance-focused rear brake upgrade designed for the demands of the McLaren Senna.