A2-296 GiroDisc Rear Brake Rotors BMW M2 CS Racing Clubsport 450 PS 1 "a"

$2,613.00

A2-296 GiroDisc Rear Brake Rotors BMW M2 CS Racing Clubsport 450 PS

$2,613.00
Product Description:

GiroDisc Rear Brake Rotors for BMW M2 CS Racing Clubsport 450 PS 

Girodisc hero featuring a glowing orange rear brake rotor, flying sparks, and vivid reflections on a wet racetrack at night.

Upgrade the rear braking system of your BMW M2 CS Racing Clubsport with GiroDisc A2-296 Two-Piece Floating Rear Brake Rotors. Specifically developed for the BMW F87 M2 CS Racing 450 PS (450 horsepower) configuration, these precision-engineered brake rotor assemblies are designed as direct replacements for the factory Alcon rear brake discs.

Engineered for competitive motorsport applications, GiroDisc combines high-carbon iron friction rings, lightweight aluminum hats, and floating rotor technology to deliver dependable braking performance under demanding racing conditions. The serviceable two-piece construction allows worn friction rings to be replaced independently of the aluminum mounting hats, reducing the need to replace complete rotor assemblies during routine racing maintenance.

Competition-Ready Rear Brake Rotors for BMW M2 CS Racing

The GiroDisc A2-296 Rear Brake Rotor Assemblies are designed specifically for BMW Motorsport's M2 CS Racing Clubsport equipped with the 450 PS competition braking configuration.

These rotors replace the original Alcon rear brake discs while retaining compatibility with the intended factory racing brake calipers and mounting arrangement.

Unlike conventional one-piece brake rotors, GiroDisc's two-piece construction separates the iron friction ring from the lightweight aluminum hat. The floating mounting system allows the two components to accommodate differential thermal expansion during repeated high-temperature braking.

This technology is particularly valuable in competitive motorsport, where sustained braking temperatures, repeated high-speed deceleration, and consistent brake response are essential.

GiroDisc A2-296 Rear Brake Rotor Features

  • BMW Motorsport-Specific Design: Engineered for the BMW F87 M2 CS Racing Clubsport 450 PS configuration.
  • Direct Alcon Rotor Replacement: Designed to replace the original rear Alcon brake discs.
  • Two-Piece Floating Construction: Combines high-carbon iron rotor rings with lightweight aluminum hats.
  • Reduced Unsprung Weight: Aluminum mounting hats help minimize unnecessary weight at the rear axle.
  • High-Carbon Iron Friction Rings: Designed to withstand demanding racing brake temperatures.
  • Advanced Rotor Cooling: Curved internal ventilation vanes promote airflow through the rotor.
  • 6061-T6 Aluminum Hats: Precision-machined aluminum mounting hats provide lightweight structural support.
  • Floating Drive System: Allows controlled thermal expansion between the rotor ring and hat.
  • High-Strength Mounting Hardware: Steel drive pins securely connect the rotor rings to the mounting hats.
  • Serviceable Rotor Design: Replaceable friction rings help simplify ongoing motorsport brake maintenance.
  • Race-Focused Engineering: Designed for demanding track conditions and competitive racing environments.

Technical Specifications

  • Manufacturer: GiroDisc
  • Part Number: A2-296
  • Product Type: Two-Piece Floating Rear Brake Rotor Assemblies
  • Vehicle Application: BMW M2 CS Racing Clubsport
  • Vehicle Chassis: F87
  • Required Configuration: 450 PS Motorsport Version
  • Brake Position: Rear
  • Original Brake System: Alcon Motorsport
  • Rotor Diameter: 355mm (confirm for specific application)
  • Rotor Thickness: 32mm (confirm for specific application)
  • Reported Rotor Weight: Approximately 19.2 lbs per rotor
  • Rotor Construction: Two-Piece Floating
  • Rotor Ring Material: High-Carbon Cast Iron
  • Rotor Hat Material: 6061-T6 Aluminum
  • Mounting Hardware: High-Strength Steel Drive Pins
  • Application: Competition Motorsport / Racing
  • Compatible Brake Pads: Inquire for Correct Application

Vehicle Fitment

The GiroDisc A2-296 Rear Brake Rotors are designed for the following BMW Motorsport application:

  • BMW M2 CS Racing Clubsport (F87): 450 PS Competition Version
  • BMW Motorsport M2 CS Racing: Factory Alcon rear braking system in the corresponding 450 PS configuration

Important Fitment Note: These rear rotors are specifically listed for the 450 PS BMW M2 CS Racing Clubsport configuration. The M2 CS Racing was offered with different performance configurations, and rotor compatibility should not be assumed across versions.

These rotors should not be confused with GiroDisc front rotor part number A1-296 or with brake rotor applications for standard road-going BMW M2, M2 Competition, or M2 CS models.

Confirm the original Alcon rotor specifications and brake configuration before purchasing.

High-Carbon Iron Rotor Technology for Motorsport Braking

GiroDisc manufactures performance brake rotor rings from a proprietary high-carbon iron formulation engineered for repeated high-temperature braking.

During competitive driving, brake rotor temperatures can rise substantially as kinetic energy is converted into heat. The rotor's material composition and ventilation design play an important role in managing thermal loads and maintaining predictable braking performance.

The A2-296's ventilated rotor construction uses curved internal cooling passages to move air through the friction ring while the assembly rotates.

This airflow helps dissipate heat generated during repeated braking events, supporting consistent brake operation throughout demanding track sessions.

Fully Floating Two-Piece Rotor Construction

The GiroDisc A2-296 features a two-piece rotor assembly consisting of a high-carbon iron friction ring connected to a lightweight aluminum mounting hat.

During high-temperature braking, the iron friction ring expands at a different rate than the aluminum hat. The floating mounting system accommodates this difference through controlled movement between the components.

High-strength steel drive pins connect the friction ring and aluminum hat while maintaining the intended rotor alignment.

The result is a serviceable brake rotor assembly engineered for the repeated thermal cycling encountered in competitive motorsport.

Direct Replacement for BMW Motorsport Alcon Rear Rotors

The GiroDisc A2-296 was developed for the rear braking system used on the BMW M2 CS Racing Clubsport 450 PS.

Designed as a replacement for the original Alcon rotor assemblies, the GiroDisc system is intended to work with the corresponding factory racing brake calipers and mounting configuration.

Correct brake rotor selection is especially important on competition vehicles, where brake bias, caliper positioning, rotor thickness, and friction material compatibility directly affect system performance.

Installation Note: Confirm that your vehicle uses the appropriate Alcon rear brake configuration before ordering. Follow applicable BMW Motorsport and GiroDisc installation procedures and inspect the complete braking system before track use.

Serviceable Rotor Rings & Reusable Aluminum Hats

The GiroDisc A2-296 utilizes a serviceable two-piece construction that allows worn high-carbon iron friction rings to be replaced separately from the aluminum mounting hats.

When the friction rings reach their specified service limits, compatible replacement rings can be installed while retaining the original aluminum hats, provided those components remain in suitable condition.

This design is especially beneficial for race teams and track-focused drivers who regularly inspect and service their braking systems.

Replacement Ring Note: Confirm the correct GiroDisc replacement ring part number and hardware requirements before ordering. Replacement ring compatibility must match the A2-296 rotor assembly.

Frequently Asked Questions

Will GiroDisc A2-296 rear rotors fit my BMW M2 CS Racing Clubsport?

The A2-296 is designed for the BMW F87 M2 CS Racing Clubsport equipped with the 450 PS competition brake configuration. Confirm your original Alcon rear rotor specifications before ordering.

Are GiroDisc A2-296 rotors for the front or rear?

The GiroDisc A2-296 rotor assemblies are designed for the rear axle. The corresponding front rotor application is listed separately as GiroDisc A1-296.

Are these rotors compatible with the 365 PS BMW M2 CS Racing?

The A2-296 is specifically listed for the 450 PS configuration. Compatibility with the 365 PS version should not be assumed. Confirm the correct application with CMS Performance before purchasing.

Do these rotors replace the original Alcon brake discs?

Yes. GiroDisc A2-296 rear rotors are listed as direct replacements for the original Alcon rear brake rotor assemblies used on the corresponding BMW M2 CS Racing Clubsport configuration.

Are GiroDisc A2-296 rotors fully floating?

Yes. The A2-296 uses a two-piece floating rotor design, allowing controlled thermal expansion between the high-carbon iron friction ring and aluminum mounting hat.

What are the dimensions of the GiroDisc A2-296 rear rotors?

Published reseller specifications list approximately 355mm in diameter and 32mm in thickness. Confirm these measurements against the specific Alcon rear brake system installed on your race car.

How much does each GiroDisc A2-296 rear rotor weigh?

A published product listing reports approximately 19.2 pounds per rotor assembly. Actual weight should be verified against the supplied rotor configuration.

Can the rotor rings be replaced separately?

Yes. GiroDisc's two-piece construction allows the friction rings to be replaced independently of the aluminum hats, provided the hats and hardware remain serviceable. Confirm the correct replacement ring part number before purchasing.

What brake pads work with GiroDisc A2-296?

Brake pad compatibility depends on the exact Alcon caliper, pad shape, and intended racing compound. Contact CMS Performance to confirm compatible brake pads for the BMW M2 CS Racing 450 PS braking system.

Are these brake rotors suitable for competitive racing?

Yes. The GiroDisc A2-296 is intended for a dedicated BMW Motorsport racing application, featuring high-carbon iron construction, floating hardware, and a serviceable two-piece design suitable for demanding motorsport environments.

Upgrade Your BMW M2 CS Racing with GiroDisc Rear Brake Rotors

For teams and drivers competing with the BMW M2 CS Racing Clubsport 450 PS, GiroDisc A2-296 rear brake rotors provide precision-engineered replacement components designed for the demands of motorsport.

With high-carbon iron friction rings, lightweight aluminum hats, and fully floating construction, the GiroDisc A2-296 offers a serviceable braking solution for maintaining a competition-ready BMW Motorsport braking system.

The Ultimate Auto Racing Helmet Buyer's Guide

We’ve sold tens of thousands of helmets here at Competition Motorsport and, in the process of doing that, answered a million questions (probably) about them. With that in mind, this article will give you the real lowdown on selecting a proper auto racing helmet. We’ll go over the why’s and how’s of size, shape, certification, pricing, features, and maintenance so you have the tools you need to select the perfect helmet.

Learn More

Driver Gear

If you wear it to protect yourself while racing, the Competition Motorsport Driver Gear collection is where you'll find it!

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the Competition Motorsport Racecar Gear collection is where you'll find it!

American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa