A2-268 Girodisc Rear Rotors| Toyota GR Corolla & Yaris 1 "a"

$1,448.00

A2-268 Girodisc Rear Rotors| Toyota GR Corolla & Yaris

$1,448.00
Product Description:

GiroDisc 316mm Rear Brake Rotors for Toyota GR Corolla & GR Yaris 

Girodisc hero featuring a glowing orange rear brake rotor, flying sparks, and vivid reflections on a wet racetrack at night.

Upgrade your Toyota GR Corolla or GR Yaris with GiroDisc A2-268 316mm Two-Piece Floating Rear Brake Rotors. Engineered for high-performance street driving and demanding track-day applications, these premium rear brake rotor assemblies combine lightweight aluminum hats, high-carbon iron friction rings, and advanced cooling technology to deliver improved heat management and reduced rotating mass.

The GiroDisc A2-268 rear brake upgrade features a 316mm rotor diameter, 18mm thickness, and fully floating two-piece construction. Because these rotors are larger than the factory rear discs, GiroDisc includes the necessary caliper spacers and longer mounting bolts to properly reposition the factory rear brake calipers. No additional vehicle modifications are required according to GiroDisc's installation design.

316mm Two-Piece Floating Rear Brake Upgrade for Toyota GR Corolla & GR Yaris

The GiroDisc A2-268 Rear Brake Rotor Assemblies are designed to enhance the braking capabilities of the Toyota GR Corolla and GR Yaris while maintaining compatibility with the intended factory rear brake system.

Unlike conventional one-piece cast iron brake rotors, GiroDisc's two-piece design combines a high-carbon iron friction ring with a lightweight, precision-machined 6061-T6 aluminum hat. This construction reduces unnecessary rotating and unsprung weight while providing the durability and thermal performance required for demanding driving conditions.

Each rear rotor assembly weighs approximately 10.4 pounds, helping reduce rotating mass at the rear axle. Lower unsprung weight can contribute to improved suspension response, while reduced rotational inertia can help improve overall vehicle responsiveness.

The 316mm diameter provides an upgraded rear rotor configuration compared with the factory disc. The included caliper spacers and longer mounting bolts allow the calipers to be correctly repositioned for the larger rotor diameter.

GiroDisc A2-268 Rear Brake Rotor Features

  • 316mm Rear Rotor Upgrade: Larger-diameter rotor configuration designed for Toyota GR Corolla and GR Yaris applications.
  • Two-Piece Floating Construction: Combines high-carbon iron friction rings with lightweight aluminum mounting hats.
  • Reduced Unsprung Weight: Each assembly weighs approximately 10.4 pounds, helping minimize rotating mass at the rear axle.
  • Proprietary High-Carbon Iron: Performance-oriented rotor material designed to withstand repeated high-temperature braking.
  • 48 Curved Cooling Vanes: Internal ventilation channels draw air through the rotor to improve heat dissipation.
  • 6061-T6 Aluminum Hats: Precision-machined aluminum mounting hats with a durable black anodized finish.
  • Fully Floating Hardware: High-strength steel drive pins accommodate thermal expansion during aggressive braking.
  • Corrosion-Resistant Drive Pins: Cadmium-plated steel hardware provides additional corrosion protection.
  • Spring Clips & Belleville Washers: Help maintain controlled rotor float while minimizing unwanted hardware noise during street use.
  • Included Caliper Spacers: Reposition the factory rear brake calipers for the larger 316mm rotor diameter.
  • Longer Caliper Bolts Included: Required mounting hardware is supplied for the upgraded rotor configuration.
  • Replaceable Rotor Rings: Reusable aluminum hats allow worn friction rings to be replaced independently.
  • American Manufacturing: Major components are manufactured in-house by GiroDisc in Bellingham, Washington.

Technical Specifications

  • Manufacturer: GiroDisc
  • Part Number: A2-268
  • Product Type: Two-Piece Floating Rear Brake Rotors
  • Vehicle Application: Toyota GR Corolla / Toyota GR Yaris
  • Brake Position: Rear
  • Rotor Outside Diameter: 316mm
  • Rotor Thickness: 18mm
  • Minimum Rotor Thickness: 16mm
  • Rotor Weight: 10.4 lbs per rotor assembly
  • Cooling Vane Count: 48 Curved Vanes
  • Rotor Ring Material: Proprietary High-Carbon Iron
  • Rotor Hat Material: 6061-T6 Aluminum
  • Rotor Hat Finish: Black Anodized
  • Drive Pin Material: High-Strength Steel Alloy
  • Drive Pin Finish: Cadmium Plated
  • Mounting Design: Fully Floating
  • Included Installation Components: Caliper Spacers and Longer Caliper Mounting Bolts
  • Replacement Rotor Rings: GiroDisc D2-268
  • Manufacturing Location: Bellingham, Washington, USA

Vehicle Fitment

The GiroDisc A2-268 316mm Rear Brake Rotors are designed for the following Toyota GR performance vehicles:

  • Toyota GR Corolla: Rear brake upgrade application.
  • Toyota GR Yaris: Rear brake upgrade application.

Important Fitment Note: The GiroDisc A2-268 rotors are larger than the factory rear brake discs and require the included caliper spacers and longer bolts for installation. Verify your vehicle's model, original brake configuration, and compatibility before ordering.

Advanced High-Carbon Iron Construction & 48-Vane Cooling Technology

GiroDisc manufactures its rotor rings from a proprietary high-carbon iron casting formulated for the demands of performance braking. This advanced metallurgy is engineered to deliver durability and consistent performance during repeated high-temperature braking events.

Each A2-268 rear rotor incorporates 48 internal curved cooling vanes that act as a centrifugal pump while the rotor rotates. Air is drawn through the rotor's internal ventilation passages, helping remove heat from the friction surfaces during aggressive braking.

Effective brake cooling is especially important during demanding driving situations, where repeated high-speed stops can generate substantial thermal loads.

By combining high-carbon iron construction with an advanced ventilation design, the GiroDisc rear rotor assembly offers improved thermal management for performance-minded Toyota GR enthusiasts.

Fully Floating Rotor Design for Consistent Braking Performance

The GiroDisc A2-268 uses a fully floating two-piece construction that allows the iron friction ring and aluminum hat to accommodate differences in thermal expansion.

Precision-machined high-strength steel drive pins connect the rotor ring to the aluminum hat while allowing controlled movement as operating temperatures change.

Spring clips and Belleville washers help manage the floating hardware while reducing the unwanted rattling commonly associated with some fully floating racing brake assemblies.

This construction provides performance-oriented rotor functionality while retaining street-friendly operating characteristics.

316mm Rear Rotor Upgrade with Included Caliper Spacers

Unlike a standard replacement rotor that duplicates the original factory diameter, the GiroDisc A2-268 uses a larger 316mm rear rotor configuration for the Toyota GR Corolla and GR Yaris.

Because of the increased diameter, the factory rear brake calipers must be repositioned to maintain the correct relationship between the brake pads and rotor friction surfaces.

GiroDisc includes the necessary caliper spacers and longer mounting bolts with the rotor assemblies to accommodate the upgraded diameter.

According to GiroDisc, no additional vehicle modifications are necessary when installing this application using the supplied components.

Installation Note: Follow the manufacturer's installation instructions and applicable Toyota service procedures. Verify caliper alignment, mounting hardware torque, and brake system operation before driving.

Reusable Aluminum Hats & GiroDisc D2-268 Replacement Rings

The GiroDisc A2-268 features a serviceable two-piece construction, allowing the high-carbon iron rotor rings to be replaced independently of the reusable aluminum hats.

Once the rotor rings become worn, compatible GiroDisc D2-268 Rear Replacement Rings can be installed while retaining the existing aluminum hats, provided the hats remain in suitable condition.

Compatible Replacement Rings: GiroDisc D2-268

GiroDisc recommends replacing the friction rings when they reach the specified minimum thickness of 16mm or when a crack extends to the outer edge of the rotor ring.

Replacement rotor rings are sold in pairs and include the necessary replacement mounting hardware. Existing GiroDisc aluminum hats are reused during ring replacement.

Always inspect rotor hats and associated components before reuse, and follow GiroDisc's replacement-ring assembly instructions.

Frequently Asked Questions

Will GiroDisc A2-268 rear rotors fit my Toyota GR Corolla?

Yes. The A2-268 rear rotor assemblies are specifically designed for the Toyota GR Corolla. They feature a larger 316mm diameter and include the caliper spacers and longer bolts required for the upgraded rear brake configuration. Confirm your exact vehicle configuration before ordering.

Are GiroDisc A2-268 rotors compatible with the Toyota GR Yaris?

Yes. GiroDisc lists the A2-268 rear rotors for both the Toyota GR Corolla and Toyota GR Yaris. Verify compatibility with your specific brake package before installation.

What size are the GiroDisc A2-268 rear brake rotors?

The rotors measure 316mm in diameter and 18mm in nominal thickness. GiroDisc recommends replacing the friction rings when they reach a minimum thickness of 16mm.

Are these rotors larger than the factory Toyota GR rear rotors?

Yes. GiroDisc specifies that the A2-268 rotors are larger than the factory rear brake discs. The package includes the necessary caliper spacers and longer bolts to reposition the factory rear brake calipers.

Do I need additional parts to install these rear rotors?

GiroDisc includes the caliper spacers and longer caliper mounting bolts needed for the larger rear rotor diameter. According to the manufacturer, no other vehicle modifications are necessary for the intended application.

How much does each GiroDisc A2-268 rear rotor weigh?

Each complete rear rotor assembly weighs approximately 10.4 pounds. The lightweight two-piece construction is designed to reduce unnecessary rotating and unsprung mass.

Are GiroDisc A2-268 rear rotors fully floating?

Yes. These assemblies feature a fully floating two-piece mounting design with high-strength drive pins, spring clips, and Belleville washers to accommodate thermal expansion while helping control hardware noise.

Can I replace the rotor rings without buying new aluminum hats?

Yes. GiroDisc A2-268 rear rotor assemblies use reusable aluminum hats. When the friction rings become worn, they can be replaced with compatible D2-268 rotor rings, provided the original hats remain serviceable.

Which replacement rotor rings fit the GiroDisc A2-268?

The compatible replacement ring part number is GiroDisc D2-268. These replacement rings are sold in pairs and include new mounting hardware.

When should I replace the GiroDisc rear rotor rings?

GiroDisc recommends replacement when the friction ring thickness reaches 16mm or when a crack extends to the outer edge of the ring. Inspect the brake components regularly, particularly after demanding track use.

Are GiroDisc A2-268 rotors suitable for track-day driving?

Yes. Their high-carbon iron friction rings, 48 curved cooling vanes, and fully floating construction are designed for demanding performance driving. Proper brake pad selection, brake fluid, and overall system maintenance remain essential for track use.

Are GiroDisc brake rotors manufactured in the United States?

Yes. GiroDisc manufactures its major rotor components, including the aluminum hats, friction rings, and drive pins, at its facility in Bellingham, Washington, using domestically sourced materials.

Upgrade Your Toyota GR Corolla or GR Yaris with GiroDisc

Whether you're preparing your Toyota GR Corolla for spirited driving or upgrading your GR Yaris for demanding track-day use, GiroDisc A2-268 316mm Two-Piece Floating Rear Brake Rotors provide a premium braking solution with lightweight construction, advanced cooling technology, and serviceable components.

With high-carbon iron friction rings, reusable aluminum hats, and the included hardware required for the larger rotor diameter, GiroDisc delivers a performance-focused rear brake upgrade engineered for Toyota GR enthusiasts.

The Ultimate Auto Racing Helmet Buyer's Guide

We’ve sold tens of thousands of helmets here at Competition Motorsport and, in the process of doing that, answered a million questions (probably) about them. With that in mind, this article will give you the real lowdown on selecting a proper auto racing helmet. We’ll go over the why’s and how’s of size, shape, certification, pricing, features, and maintenance so you have the tools you need to select the perfect helmet.

Learn More

Driver Gear

If you wear it to protect yourself while racing, the Competition Motorsport Driver Gear collection is where you'll find it!

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the Competition Motorsport Racecar Gear collection is where you'll find it!

American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa