GiroDisc Front Brake Rotors – Nissan 350Z / Infiniti G35 with Brembo Brakes

Upgrade the rear braking performance of your Nissan 350Z or Infiniti G35 with GiroDisc A2-013 Two-Piece Floating Rear Brake Rotors. Engineered as a direct replacement for factory rear rotors on models equipped with Brembo brake calipers, these precision-manufactured assemblies reduce unsprung weight and rotating mass while delivering excellent heat management, durability, and consistent braking performance.
Designed for demanding street driving and track-day applications, GiroDisc rear brake rotors feature proprietary high-carbon iron friction rings, lightweight aluminum hats, and a fully floating two-piece construction. Manufactured in the USA, these performance brake rotors offer a serviceable design that allows the friction rings to be replaced independently of the reusable aluminum hats.
Lightweight Two-Piece Floating Rear Rotors for Nissan 350Z & Infiniti G35
The GiroDisc A2-013 Rear Rotor Assemblies are engineered to improve braking efficiency while reducing unnecessary weight at the rear axle. Their two-piece construction combines a high-carbon iron rotor ring with a lightweight 6061-T6 aluminum mounting hat, helping reduce rotating mass compared with traditional one-piece rotor designs.
The rotor rings feature 48 internal curved cooling vanes that act as a centrifugal pump, drawing air through the rotor to help dissipate heat generated during aggressive braking. This improved airflow helps manage brake temperatures during repeated high-speed stops, spirited driving, and track-day use.
GiroDisc's fully floating mounting design uses precision-machined drive pins, spring clips, and spring washers to accommodate thermal expansion while maintaining controlled operation suitable for street-driven performance vehicles.
GiroDisc A2-013 Rear Brake Rotor Features
-
Direct Replacement Design: Engineered for Nissan 350Z and Infiniti G35 rear Brembo brake applications.
-
Two-Piece Floating Construction: Combines high-carbon iron rotor rings with lightweight aluminum hats.
-
Reduced Unsprung Weight: Helps decrease rear axle weight and rotating mass.
-
High-Carbon Iron Rotor Rings: Manufactured from GiroDisc's proprietary high-carbon iron casting for demanding braking conditions.
-
48 Curved Cooling Vanes: Promote airflow through the rotor to help dissipate braking heat.
-
6061-T6 Aluminum Hats: Lightweight, precision-machined aluminum hats with black anodized finish.
-
Fully Floating Hardware: High-strength steel drive pins with corrosion-resistant cadmium plating.
-
Street-Friendly Operation: Spring clips and washers help control hardware movement and minimize unwanted noise.
-
Replaceable Friction Rings: Reusable aluminum hats allow replacement of worn rotor rings.
-
American Manufacturing: Major rotor components are manufactured in-house by GiroDisc in Bellingham, Washington.
Technical Specifications
-
Manufacturer: GiroDisc
-
Part Number: A2-013
-
Product Type: Two-Piece Floating Rear Brake Rotors
-
Vehicle Application: Nissan 350Z / Infiniti G35 with Brembo Calipers
-
Brake Position: Rear
-
Rotor Outside Diameter: 322mm
-
Rotor Thickness: 22mm
-
Minimum Rotor Thickness: 20mm
-
Rotor Weight: Approximately 12 lbs per rotor assembly
-
Cooling Vane Count: 48 Curved Vanes
-
Rotor Ring Material: Proprietary High-Carbon Iron
-
Rotor Hat Material: 6061-T6 Aluminum
-
Hat Finish: Black Anodized
-
Drive Pin Material: High-Strength Steel Alloy
-
Drive Pin Finish: Cadmium Plated
-
Mounting Design: Fully Floating
-
Replacement Rotor Rings: GiroDisc D2-013
-
Manufacturing Location: Bellingham, Washington, USA
Vehicle Fitment
The GiroDisc A2-013 Rear Brake Rotors are designed for the following Brembo-equipped applications:
-
Nissan 350Z: Models equipped with the factory Brembo rear brake calipers.
-
Infiniti G35: Models equipped with the factory Brembo rear brake calipers.
Important Fitment Note: These rotors are designed for Brembo-equipped braking systems. Not all Nissan 350Z or Infiniti G35 models were equipped with the same rear brake package. Verify your vehicle's rear caliper configuration and original rotor dimensions before ordering.
High-Carbon Iron Rotor Technology & Advanced Cooling
GiroDisc rotor rings are machined from proprietary high-carbon iron castings formulated specifically for demanding performance applications. The material is engineered to handle the repeated thermal loads produced during aggressive braking.
Each rotor incorporates 48 internal curved cooling vanes designed to move air through the assembly during rotation. This airflow helps dissipate heat and supports more consistent braking performance during repeated stops.
The fully floating assembly allows the rotor ring and aluminum hat to accommodate differences in thermal expansion while keeping the assembly securely located through precision-machined hardware.
Reusable Aluminum Hats & Replacement Rotor Rings
Unlike conventional one-piece brake rotors, the GiroDisc A2-013 features a reusable aluminum hat. When the friction rings become worn, the rings can be replaced without purchasing an entirely new rotor assembly, provided the hats and mounting hardware remain serviceable.
Compatible Replacement Rings: GiroDisc D2-013
GiroDisc recommends replacing the rotor rings when they reach the specified minimum thickness of 20mm or when a crack extends to the outer edge of the friction ring.
Always inspect rotor condition and follow the manufacturer's servicing recommendations before reuse or replacement.
Frequently Asked Questions
Will GiroDisc A2-013 rear rotors fit my Nissan 350Z?
These rotors are designed for Nissan 350Z models equipped with Brembo rear brake calipers. Confirm your brake package before purchasing, as non-Brembo configurations may use different rotor dimensions.
Are these rotors compatible with the Infiniti G35?
Yes. GiroDisc A2-013 rear rotors are designed for Infiniti G35 applications equipped with the corresponding Brembo rear brake system. Verify your specific brake configuration before ordering.
What size are the GiroDisc A2-013 rear rotors?
The rotors measure 322mm in outside diameter and 22mm in nominal thickness, with a minimum allowable thickness of 20mm.
How much do GiroDisc A2-013 rear rotor assemblies weigh?
Each rotor assembly weighs approximately 12 pounds according to GiroDisc's published specifications.
Are GiroDisc A2-013 rear rotors fully floating?
Yes. These rotors use a fully floating two-piece construction with high-strength drive pins, spring clips, and spring washers to accommodate thermal expansion while helping control brake hardware noise.
Can I replace the rotor rings without replacing the aluminum hats?
Yes. The two-piece design allows the aluminum hats to be reused with compatible GiroDisc D2-013 replacement rings, provided the hats and mounting hardware remain in serviceable condition.
Are these rear brake rotors suitable for track-day driving?
Yes. Their high-carbon iron construction, curved cooling vanes, and fully floating design make them suitable for demanding performance driving and track-day applications when used with an appropriately configured braking system.
Do these rotors fit vehicles without Brembo calipers?
These rotors are specifically listed for Nissan 350Z and Infiniti G35 applications with Brembo rear calipers. Compatibility with other brake configurations should not be assumed.
Where are GiroDisc brake rotors manufactured?
GiroDisc manufactures its major rotor components, including the aluminum hats, iron friction rings, and drive pins, in-house in Bellingham, Washington, USA.
Upgrade Your Nissan 350Z or Infiniti G35 with GiroDisc
Whether you're maintaining a Brembo-equipped Nissan 350Z or upgrading the rear braking system of your Infiniti G35, GiroDisc A2-013 Two-Piece Floating Rear Brake Rotors offer a combination of lightweight construction, advanced cooling technology, and serviceable performance engineering.
Choose GiroDisc for precision-manufactured rear brake rotors designed to deliver dependable performance on the street and under demanding track-day conditions.