Lamborghini Huracan LP610

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Engine Bay Panels FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)   Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Huracán. Fitment: 2014+ Lamborghini Huracán FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

D1-050 Girodisc Audi R8, Lamborghini 394mm Front Replacement Rings Restore maximum braking performance on your Audi R8 or Lamborghini Huracán with Girodisc D1-050 394mm front replacement rings. These precision-machined rotors are direct replacements for Girodisc two-piece systems and bolt to your existing aluminum hats using the supplied floating hardware kit. Each ring is manufactured from Girodisc’s proprietary high-carbon cast iron for consistent friction, superior heat control, and fade-free braking under aggressive use. Vehicle Fitment Compatible with:• Audi R8 (Gen 1 & Gen 2, all trims with 394mm iron rotor setup)• Lamborghini Huracán LP580 / LP610 / EVO (non-CCB)Note: Designed exclusively for Girodisc 394mm two-piece front rotor systems. Not compatible with OEM carbon-ceramic or one-piece rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 394mm two-piece front rotors• CNC-machined from high-carbon cast iron for strength and thermal stability• Directional curved vanes enhance cooling efficiency and airflow• Maintains OEM brake bias, ABS, and traction control calibration• Precision-balanced for vibration-free performance• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 394 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and complete hardware kit• Sold/priced per pair Girodisc D1-050 Audi R8 / Lamborghini Front Replacement Ring FAQs Can these be used with OEM Audi or Lamborghini rotor hats? No. These rings are designed only for Girodisc aluminum hats and will not mount to OEM one-piece or carbon-ceramic rotor systems. Which pad compounds work best with these rotors? For street and light-track use, Ferodo DS2500 or Hawk HPS 5.0 perform exceptionally. For track use, Pagid RS29 or Carbotech XP12 are recommended for balanced heat control and bite. Do these rotors improve braking over OEM? Yes. The two-piece floating design reduces unsprung weight and increases heat dissipation, giving you more consistent pedal feel and fade resistance. What torque spec should be used on the hardware? Torque each bolt to 12 ft-lbs (16 Nm) with blue Loctite, then recheck after the first full heat cycle to confirm secure float and proper alignment. Bring supercar-level braking consistency back to your Audi R8 or Lamborghini Huracán with Girodisc D1-050 394 mm front replacement rings — engineered for precision, durability, and repeatable performance at any speed.

C3 Carbon  Lamborghini Urus Carbon Fiber Plenum FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)   Spectacular gloss and matte carbon fiber replacement for the black plastic engine plenum cover on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Complete Engine Bay FITS: Lamborghini Urus/Urus S/Urus Performante (2019+) INTRODUCTION SALE: SAVE $500! Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Rear Deck Lid Trim Beautiful carbon fiber replacement for the black plastic trim panel on the Lamborghini Huracan LP610's rear deck lid. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panel installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece adds a drama to the rear appearance of the Huracán. Fitment: 2014+ Lamborghini Huracán FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.