Brand

Dull Finish Racers Tape 2in by 83ft (Gaffers Tape) The preferred choice of the pros. Dull Finish Gaffers tape is a vinyl-coated cloth, rather than a poly coated. Anybody who has ever used Gaffers tape, in place of duct tape, never looks back. This tape has a high quality adhesive that does not leave a sticky residue when removed. It comes in six brilliant colors and has many racing uses, including pit marking, emergency body and fender repair and waterproofing. The uses are endless. Available in eight colors; Black White Red Blue Electric Blue Yellow Neon Pink Neon Green    

Ferodo 11 FRP1078GB-N DS3.12 Porsche 992 GT3 Cup Car Rear Brake Pads   Ferodo 11 FRP1078GB-N DS3.12 Porsche 992 GT3 Cup Car Rear Brake Pad Fitment: Porsche 992 911 GT3 Cup Car Ferodo Brake Pad Compound DS3.12 The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. Ferodo 11 FRP1078GB-N Comparison Chart The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability. Ferodo 11 FRP1078GB-N Coefficient of Friction (Mu) Chart The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors. Ferodo 11 FRP1078GB-N Temperature Chart We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.

Ferodo 11 FRP3151GB-N DS3.12 Porsche 991 GT3 Cup Car Front Brake Pads   Ferodo 11 FRP3151GB-N DS3.12 Porsche 991 GT3 Cup Car Front Brake Pad Fitment: Porsche 991 911 GT3 Cup Car (Front) Ferodo Brake Pad Compound DS3.12 The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. Ferodo 11 FRP3151GB-N Comparison Chart The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability. Ferodo 11 FRP3151GB-N Coefficient of Friction (Mu) Chart The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors. Ferodo 11 FRP3151GB-N Temperature Chart We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.

Ferodo 11 FRP3152GB-N DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pads   Ferodo 11 FRP3152GB-N DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pad Fitment: Porsche 991 911 GT3 Cup Car (Rear) Ferodo Brake Pad Compound DS3.12 The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. Ferodo 11 FRP3152GB-N Comparison Chart The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability. Ferodo 11 FRP3152GB-N Coefficient of Friction (Mu) Chart The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors. Ferodo 11 FRP3152GB-N Temperature Chart We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.

Ferodo FCP 4805 Porsche Front Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FCP4805 Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X Ferodo Compound DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo Compound DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo Compound DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo FCP4805 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4805 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4805 Operating Temperature Comparison Chart

Ferodo 11 FCP4664 Porsche Front Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo 11 FCP4664 Front Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 GT3 [iron brakes] 14 - 16 X Porsche 991 GT3 RS [iron brakes] 16 X Porsche 991 Turbo [iron brakes] 13 - X Porsche 991 Turbo S [iron brakes] 13 - X Porsche 991.2 GT3 [iron brakes] 18 - 19 X Porsche 991.2 GT3 RS [iron brakes] 19 X Porsche 991 911 Speedster [iron brakes] 19  X Porsche 992 3.0 Carrera S [iron brakes] 20 - X Porsche 992 3.0 Carrera 4S [iron brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche Cayman GT4 [981] 16 - X Porsche 718 Cayman GTS 4.0 [982] [iron brakes] 2016 X Porsche 992 Turbo [iron brakes] 2020 - X Porsche 992 GT3 [iron brakes] 2022 - X Porsche 718 Cayman GT4RS [iron brakes] 23 - X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo DSUno Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4664 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4664 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4664 Operating Temperature Comparison Chart

Ferodo 11 FCP4665 Porsche Rear Brake Pads Designed for use with iron brake rotors only. Not for carbon-ceramic rotors. Ferodo FCP4665 Porsche Rear Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 918 Spyder 15 - X Porsche 991 GT3 [iron brakes] 14 - 18 X Porsche 991 GT3 RS [iron brakes] 16 -  X Porsche 991 Turbo [iron brakes] 13 - 19 X Porsche 991 Turbo S [iron brakes] 13 - 19 X Porsche 991.2 GT3 [iron brakes] 18 - X Porsche 991.2 GT3 RS [iron brakes] 19 - X Porsche 991 911 Speedster [iron brakes] 19 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche Cayman GT4 [981] 16 - 20 X Porsche 992 Turbo [iron brakes] 20 - X Porsche 992 GT3 [iron brakes] 22 - X Porsche 718 Cayman GT4 4.0 RS [982] [iron brakes] 21 - X   Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo DSUno Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo FCP4665 Compound Comparison Chart The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FCP4665 Operating Temperature Comparison Chart Ferodo FCP4665 Friction Coefficient (Mu) Comparison Chart

Ferodo 11 FCP4713 Porsche Rear Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo 11 FCP4713 Rear Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X Ferodo Compound DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo Compound DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo Compound DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4713 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4713 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4713 Operating Temperature Comparison Chart

Ferodo 11 FCP4955 Porsche Front Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo 11 FCP4955 Front Brake Pad Fitment: Porsche 991 S/4S/GTS (2012-2019) Porsche 981 Boxster Spyder (2016-2020) Ferodo Compound DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo Compound DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo Compound DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4955 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4955 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4955 Operating Temperature Comparison Chart

Ferodo FRP3075 Porsche Front Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FRP3075 Front Brake Pad Fitment: Porsche 997 GT3 Cup Car  (2006-2012) Porsche 996 GT3 Cup Car (2000-2005) Porsche 997 Turbo (2007-2012 Porsche 997 GT3/GT3RS/GT2/GT2RS (2007-2012) Porsche Carrera GT Front and Rear Pads Ferodo DS3.12 Brake Compound Details Released in 2019, the DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly to handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than Ferodo's other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 is the gold standard to which other race compounds will be compared. Ferodo DS1.11 Brake Compound Details The Ferodo DS1.11 is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. With an incredible flat torque curve across the workable range of 392 to 1382 degrees. Designed to put you on the podium of your next WRL race or HPDE, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap.  The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo FRP3075 Performance Comparison Chart The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP3075 Compound Friction Coefficient Comparison Chart Ferodo FRP3075 Compound Operating Temperature Chart

Ferodo FRP3110G DS3.12 Porsche Front Brake Pads Designed for use with iron brake rotors only. Ferodo 11 FRP3110GB-N DS3.12 Front Brake Pad Fitment: Porsche 992 GT3 Cup Car (Front) Compound: DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo FRP3110G DS3.12 Relative Performance Chart  Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FRP3110G DS3.12 Friction Coefficient (Mu) Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FRP3110G DS3.12 Operating Temperature Chart

Ferodo FRP3143 Porsche Rear Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo FRP3143 Front Brake Pad Fitment: Porsche 997 GT3 Cup Car  (2006-2012) Porsche 996 GT3 Cup Car (2000-2005) Porsche 997 Turbo (2007-2012 Porsche 997 GT3/GT3RS/GT2/GT2RS (2007-2012) Ferodo DS3.12 Brake Compound Details Released in 2019, the DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly to handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than Ferodo's other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 is the gold standard to which other race compounds will be compared. Ferodo DS1.11 Brake Compound Details The Ferodo DS1.11 is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. With an incredible flat torque curve across the workable range of 392 to 1382 degrees. Designed to put you on the podium of your next WRL race or HPDE, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap.  The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo FRP3143 Performance Comparison Chart The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP3143 Compound Friction Coefficient Comparison Chart Ferodo FRP3143 Compound Operating Temperature Chart

Ferrari Hub-Centric Star Wheel Spacers Fits the Following Cars: Ferrari 458 Italia (including Spider) w/ original factory wheels Ferrari California w/ original factory wheels Get Your Ferrari's Wheels Out Where God Intended Them To Be Competition Motorsport CNC mills these Ferrari hub-centric star-shaped wheel spacers from solid forgings of premium 7075-T6 aerospace-grade aluminum alloy. They add a wider, more aggressive stance to your Ferrari 458 Italia or Ferrari California (without going too far – 15 mm is just right). And they fit precisely, discretely behind the OEM 458 or California wheels with star-shaped mounting flanges, enhancing aesthetics and improving handling. Far stronger than ordinary 6061 aluminum spacers (particularly at the critical hub mounting flange), Competition Motorsport 7075-T6 spacers are machined to a minimum of material for the lightest possible weight, thenhard anodized a dark black for superior durability. Competition Motorsport Star Spacers come in 15mm thickness, for the perfect stance both front and rear on your Ferrari 458 Italia or California. Add titanium wheel bolts precisely machined from forged Grade-5 Ti-6Al-4V aerospace titanium alloy. This alloy is 45% lighter, stronger, and less heat-conductive than even high-strength steel bolts. Rolled threads (never cut) for incredible strength and durability. What's Included in the Package CMS Performance Star Wheel Spacers includes two (2) 15 mm hub-centric, 7075-T6 hard anodized star-shaped Ferrari wheel spacers (5 x 114.3mm bolt circle, 67.1mm center bore).

Competition Motorsport Hub-Centric Racing Wheel Spacer Kit for Ferrari Competition Motorsport ultra-light Ferrari hub-centric racing wheel spacers add a much-needed wider, more aggressive stance to your Ferrari. They not only enhance aesthetics, they also improve handling by giving the car a wider track. Competition Motorsport Ferrari spacers are CNC machined from solid forgings of the highest quality 7075-T6 aerospace-grade aluminum (our competitors use weaker – and cheaper – 6061 aluminum). We hard-anodized our spacers a deep black for superior durability. Taking advantage of our higher-strength material, our Ferrari spacers are engineered to incorporate a minimum of material for the lightest possible weight. Choose between 15, 18, and 20mm spacers to customize the stance of your Ferrari to your taste. CMS Performance 7075-T6 Spacers Include: Two hub-centric, 7075-T6 hard anodized wheel spacers Add titanium bolts as an additional option (spacers don't include any bolts) Add Titanium Lug Bolts Machined from forgings of aerospace Grade 5 Ti-6Al-4V titanium alloy, our titanium lug bolts are an incredible 45% lighter than steel with far higher tensile strength and lower heat conductivity. Our bolt threads are rolled (never cut) to maximize their strength and durability.

FluidLogic Coaxial System Driver hydration and forced-air cooling through one connection. Forced-air applications use the FluidLogic Maglock Coaxial System connector to provide the driver with both air and water quickly and easily. The FluidLogic Pod and FluidLogic Coaxial System kit is designed for users who already have a helmet forced-air setup for their vehicle. The Pod is the heart and brain of the FluidLogic system that connects to your iOS device via Bluetooth, allowing the you to fully customize your hydration profile. Included with the Pod is the Microbutton, used to visually communicate with the user and command the FluidLogic system with the press of a button. All the necessary mounting, wiring, and plumbing hardware is included to turn your existing drink source into a smart hydration system with no helmet drilling or modifications. The FluidLogic Pod paired with the Coaxial System allows forced air users to connect both air and water within the same Maglock magnetic connection. The Coaxial System kit includes everything needed to completely set up one helmet and one seat in the vehicle.