Brand

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For GR Corolla This Product Fits The Following Cars: Toyota GR Corolla (2023+) Quick and Easy Installation of Harness Lap Belts in the GR Corolla The CMS Performance Harness Install Kit for the GR Corolla provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your GR Corolla. The kit is typically used along with the bolt-in CMS Performance Roll Bar for the GR Corolla. Together they give GR Corolla driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance GR Corolla Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance GR Corolla Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the GR Corolla, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the GR Corolla that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Lap Belt Mounts for Subaru WRX Secure Racing Harness Lap Belt Mounting for Your Subaru WRX The CMS Performance Lap Belt Mounts for Subaru WRX provide strong, dedicated mounting points for the lap belts of your racing harness while retaining the factory seats and normal seat operation. Designed specifically around the Subaru WRX seat mounting system, the CMS Performance Lap Belt Mounts install beneath the factory seat slider tracks using the vehicle's existing seat mounting locations. No drilling, cutting, welding, or permanent modification to your WRX is required. The Right Way to Mount Harness Lap Belts in Your Subaru WRX A properly installed racing harness requires strong and correctly positioned mounting points. The CMS Performance Subaru WRX Lap Belt Mounts eliminate the need for improvised mounting solutions by providing dedicated attachment points specifically for your harness lap belts. The mounts utilize the factory seat mounting locations beneath the seat slider assembly, creating a clean and secure installation while keeping the hardware tucked discreetly beneath the seat. 1/4-Inch Solid Carbon Steel Construction CMS Performance Lap Belt Mounts are manufactured from 1/4-inch solid carbon steel and feature fully TIG-welded harness mounting tabs for exceptional strength and rigidity. Each mount is finished in a durable satin black powder coat that protects the steel and allows the hardware to blend cleanly into the Subaru WRX interior. 1/4-inch solid carbon steel construction Fully TIG-welded harness mounting tabs Dedicated racing harness lap belt mounting points Durable satin black powder-coated finish Low-profile vehicle-specific design True Bolt-In Installation With No Drilling The CMS Performance Subaru WRX Lap Belt Mounts install using existing factory seat mounting locations and hardware. There is no need to drill holes through the chassis, cut the interior, or weld mounting plates into the vehicle. The mounts can also be removed without leaving permanent modifications behind, making them an excellent option for street-driven WRXs that also see track use. Retains Factory Seat Adjustment The CMS Performance Lap Belt Mounts are engineered to integrate with the factory Subaru WRX seating system without sacrificing normal seat operation. Fits driver or passenger seat applications Maintains full fore/aft seat adjustment Maintains factory up/down seat adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Installs beneath the factory seat slider tracks No drilling or cutting required Built for Street and Track Subaru WRXs For Subaru WRX owners participating in track days, HPDE events, time trials, autocross, or other motorsport activities, the CMS Performance Lap Belt Mounts provide a clean solution for adding dedicated racing harness mounting points while retaining the factory interior. The low-profile design keeps the mounts nearly invisible once installed while providing convenient attachment points when your racing harness is in use. Designed and Manufactured in the USA The CMS Performance Subaru WRX Lap Belt Mounts are designed, manufactured, TIG welded, and powder coated in-house in the USA. CMS Performance components are engineered specifically for motorsport applications with an emphasis on strength, vehicle-specific fitment, straightforward installation, and clean integration with the factory vehicle. CMS Performance Subaru WRX Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mounts Vehicle: Subaru WRX Construction: 1/4-inch solid carbon steel Welding: TIG-welded construction Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions What do the CMS Performance Subaru WRX Lap Belt Mounts do?They provide dedicated attachment points for the lap belt portion of a racing harness without requiring permanent modifications to the vehicle. Do the Subaru WRX Lap Belt Mounts require drilling?No. They install using the factory seat mounting locations and require no drilling, cutting, or welding to the vehicle. Can the mounts be installed on the driver and passenger sides?Yes. The mounts are designed for use with either the driver or passenger seat. Will I still be able to adjust my factory seat?Yes. The mounts are designed to retain normal fore/aft and up/down factory seat adjustment. Can I continue using my factory seat belt?Yes. The mounts are designed so they do not interfere with the OEM three-point seat belt or factory airbag hardware. Are these mounts for the lap belts or sub straps?These mounts are specifically designed to provide mounting points for the lap belt portion of a racing harness. A sub strap mounting solution is required separately when installing a harness with anti-submarine straps. Can the mounts be removed later?Yes. Because they utilize the factory seat mounting locations, the mounts can be removed without leaving drilled holes or other permanent modifications behind. Where are the CMS Performance Subaru WRX Lap Belt Mounts made?They are designed, manufactured, TIG welded, and powder coated in-house in the USA.

CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550 Secure Harness Lap Belt Mounting for Your Ford Mustang The CMS Performance Lap Belt Mount provides strong, properly positioned mounting points for racing harness lap belts in Ford Mustang GT350, GT350R, GT500, and S550 applications. Designed for use with the factory Ford Performance seating system, this bolt-in mount installs beneath the factory seat slider tracks using the vehicle's original seat mounting locations. No drilling, cutting, or permanent modification to the vehicle is required. Vehicle Fitment The CMS Performance Lap Belt Mount fits all variants of the following vehicles: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) Heavy-Duty TIG-Welded Steel Construction Built for serious track and motorsport use, the CMS Performance Lap Belt Mount is manufactured from heavy-duty solid carbon steel and fully TIG welded to create a rigid, secure structure for mounting your racing harness lap belts. The mount is finished in a durable satin black powder coat that blends cleanly into the interior and is nearly invisible once the seat is installed. True Bolt-In Installation The CMS Performance Lap Belt Mount attaches to the factory seat mounting points beneath the seat slider tracks and utilizes the original Ford seat mounting hardware. Installation requires no drilling, welding, or cutting and can be reversed without leaving permanent modifications behind. Maintains Factory Seat Function Unlike improvised harness mounting solutions, the CMS Performance Lap Belt Mount is engineered specifically around the factory Mustang seat system. Fits the driver or passenger seat Maintains full fore/aft seat adjustment Maintains factory seat height adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Provides dedicated mounting points for racing harness lap belts Designed and Manufactured in the USA The CMS Performance Lap Belt Mount is designed, manufactured, TIG welded, and powder coated entirely in-house in the USA. Every mount is built specifically for motorsport applications where strength, proper harness positioning, vehicle compatibility, and clean installation are critical. CMS Performance Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mount Construction: TIG-welded solid carbon steel Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger side Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions Does installation require drilling or cutting?No. The CMS Performance Lap Belt Mount installs using the factory seat mounting locations and original mounting hardware. Will the mount interfere with seat adjustment?No. The mount is designed to retain normal fore/aft and up/down seat adjustment. Can it be installed on the driver and passenger seats?Yes. The mount can be used on either the driver or passenger side. Can I continue using the factory seat belt?Yes. The mount is designed so it does not interfere with the factory three-point seat belt or associated airbag hardware. Is this the Sub Strap + Lap Belt Mount?No. This listing is specifically for the CMS Performance Lap Belt Mount. A combination Sub Strap + Lap Belt mounting solution is available separately for applications requiring both lap belt and anti-submarine belt mounting points. Where is the CMS Performance Lap Belt Mount made?It is designed, manufactured, TIG welded, and powder coated in the USA. ```

CMS Performance Full-Size Racing Gear Bag This large, high-end gear bag is designed to carry everything you need for a weekend at the race track. Its large main compartment can be divided to keep your racing gear, helmet/HANS, etc. separate from your casual wear. It also features an expandable waterproof compartment to keep dirty or damp items separate. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Large Racing Gear Bag has three zippered compartments: a main compartment large enough for a fire suit, gloves, shoes, helmet, HANS, and other accessories; a front pocket to hold smaller gear and racing accessories; and a zippered "hamper" compartment to keep dirty or damp items separate. Includes three velcro dividers and a padded shoulder strap to make toting everything you need for a race weekend easy and convenient. CMS Performance Large Racing Gear Bag Details Manufacturer: CMS Performance Manufacturer part no.: CMS-GearBag Material: heavy duty nylon Main Compartment: 30" x 16" x 15" (76cm x 41cm x 38cm) Front Compartment: 21" x 11" x 2" (53cm x 28cm x 5cm)

CMS Performance Bolt-In Harness Bar This Harness Bar Fits The Following Cars: Porsche Boxster Spyder RS (2023-25) Porsche Cayman (2014-25) Porsche Cayman S (2014-25) Porsche Cayman GTS (2015-25) Porsche Cayman GT4 (2016-22) Porsche Cayman GT4 RS (2022-25) Porsche Boxster (2013-25) Porsche Boxster S (2013-25) Porsche Boxster GTS (2013-25) High Strength Bolt-In Harness Bar for the Porsche Cayman & Boxster Expertly crafted from high-strength, 1.5" fully TIG welded Docol R8 Advanced High-Strength Steel tubing, the CMS Performance Harness Bar is the strongest, lightest, and safest bolt-in harness bar on the market for your Porsche. It gives you the perfect attachment for your five- or six-point harness shoulder straps without having to install a full roll bar. The CMS Performance Harness Bar is designed to place your racing harness shoulder straps at the proper angle (0° to -20°) and distance (eight inches or less) so the driver and passenger racing harnesses function properly. There is no need to cut your Porsche's carpeted central hump, a design unique to CMS Performance that provides an ideal location for mounting an AiM SmartyCam. The CMS Performance Harness Bar also gives you full access to the engine cover. It mounts to the frame structure across the passenger compartment bulkhead, directly behind the seats. Click Here For Installation Instructions Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. The Ultimate in Quality and Precision The CMS Performance Harness Bar is meticulously designed, fabricated, and fully TIG welded by CMS Performance master fabricators for unsurpassed integrity, fit, and finish. The harness bar comes standard in a smooth satin black powder coat to complement any interior. Or you can choose from any number of custom powder coat colors matched to most factory Porsche paint colors. To install the CMS Performance Harness Bar, some modification of your OEM interior trim will be required. CMS Performance offers precision-cut OEM Porsche trim as an option to ease installation and preserve your original interior pieces. CMS Performance Harness Bar Details 1.50″ x .120" Docol R8 Advanced High-Strength Steel No cutting of carpeted center hump preserves expensive OEM carpet CNC-cut mounting plates Designed, built and finished in the USA Allows full seat travel with any seat Easy to install with perfect fitment guaranteed Detailed installation instructions and all necessary hardware included

Porsche Carbon Bucket Seat Lap Belt Mounts Tired of paying a premium for Porsche harnesses?  Can't find the harness you want with the Porsche-specific bolt-in attachments?  Too much hassle to unbolt the lap belts after a track day?  Tired of driving to work sitting on your racing harness?  Us to, that's why we designed and manufactured the lap belt mounts that allow you to use a standard clip-in racing harness.  Simply clip them in while at the track and unclip them and store them in your CMS gear bag when you are not.  These Porsche Carbon Bucket Seat Lap Belt Mounts provide dedicated attachment points for clip-in lap belts of a racing harness when using Porsche OEM carbon bucket seats. The kit includes a pair of heavy-duty steel brackets designed to install at the seat mounting locations. Each bracket features an upright mounting tab that provides a secure and convenient attachment point for the left and right clip-in lap belts of your harness. Porsche Lap Belt Mount Features Designed for Porsche OEM carbon bucket seat applications Provides dedicated racing harness lap belt mounting points Heavy-duty steel construction Black protective finish Upright harness attachment tab Installs at the seat mounting location Helps simplify proper lap belt installation and routing Includes left and right mounting brackets Sold as a pair Designed for Racing Harness Installation Porsche factory carbon bucket seats are an excellent choice for track use, but adding a multi-point racing harness requires suitable mounting locations for each belt. These brackets provide dedicated attachment points for the lap portion of the harness without requiring the harness to be bolted to the carbon seat shell 3 point seat belt mounting points. The compact design keeps the mounting hardware close to the seat while providing a strong attachment location for compatible bolt-in or harness mounting hardware. What's Included 1 Left-side lap belt mounting bracket 1 Right-side lap belt mounting bracket Installation The brackets install at the Porsche seat mounting locations and provide an upright attachment point beside the seat for the harness lap belts. Always verify proper harness belt angles, hardware engagement, and mounting procedures according to the harness manufacturer's instructions. Questions About Porsche Harness Fitment? Are these mounts made from carbon fiber?No. The mounts are steel. “Carbon” refers to their intended use with Porsche carbon bucket seats. Are both sides included?Yes. The kit includes one left-side and one right-side lap belt mounting bracket for one seat. Do these mount directly to the carbon seat?No. They are designed to install at the seat mounting location rather than attaching directly to the carbon seat shell. What part of the harness do these mount?These brackets are designed to provide attachment points for the left and right lap belts of a multi-point racing harness. Do I still need other harness mounts?Yes. A complete harness installation may also require proper shoulder-belt and anti-submarine belt mounting points depending on the harness configuration.

CMS Performance Racing Seat Side Mounts CMS Performance Racing Seat Side Mounts provide a strong, the most highly adjustable solution for mounting compatible side-mount racing seats while also incorporating dedicated mounting points for your racing harness lap belts.  No other side mount allows for more adjustments than any other side mounts on the market Available in both Short and Tall versions, these mounts give drivers and builders the ultimate flexibility to fine-tune seat height, rake, and overall driving position while simplifying the installation of the lap portion of a multi-point racing harness. Integrated Racing Harness Lap Belt Mounting Points Unlike basic racing seat side brackets, the CMS Performance Side Mounts incorporate dedicated attachment points for the left and right lap belts of a compatible racing harness. This helps create a cleaner, more integrated seat and harness installation without requiring separate universal lap belt brackets. The lap belt mounting locations are built directly into the seat mounting system, keeping the attachment points close to the seat and helping provide proper harness routing across the driver's pelvis. Choose Short or Tall Side Mounts Short Side Mounts: The Short version features a compact profile for installations where less vertical mounting range is required. It is an excellent choice for lower seating positions and tighter cockpit installations. Tall Side Mounts: The Tall version provides additional vertical adjustment range, giving you more flexibility when setting seat height, seat rake, and overall driver position. CMS Performance Racing Seat Side Mount Features Available in Short and Tall versions Designed for compatible side-mount racing seats Integrated left and right racing harness lap belt mounting points Eliminates the need for separate universal lap belt mounting brackets in compatible installations Multiple seat mounting slots and adjustment positions Allows adjustment of racing seat height and rake Helps fine-tune driver seating position Strong, rigid construction for secure seat mounting Black finish for a clean motorsport appearance Ideal for track, race, and performance vehicle builds Dial In Your Racing Seat Position A properly positioned racing seat is critical for driver control, comfort, and harness fit. The CMS Performance Side Mounts provide numerous mounting positions to help position the seat correctly in relation to the steering wheel, pedals, roll bar or cage, helmet clearance, and harness system. The multiple horizontal and vertical mounting locations allow you to achieve a more customized seating position instead of being limited to only a few fixed mounting points. Short Side Mounts The CMS Performance Short Side Mounts are ideal when a compact mounting profile is preferred. They provide substantial adjustment for many racing seat installations while keeping the overall bracket height low. Compact side-mount profile Ideal for lower seating positions Great for tighter cockpit installations Multiple adjustment positions for seat rake and height Integrated racing harness lap belt mounting points Tall Side Mounts The CMS Performance Tall Side Mounts provide increased vertical mounting range for installations requiring additional height or a greater range of seat-angle adjustment. Taller side-mount profile Increased vertical adjustment range Greater flexibility when setting seat rake Ideal for custom seating positions requiring additional height Integrated racing harness lap belt mounting points Designed for Side-Mount Racing Seats These brackets are intended for compatible fixed-back racing seats that use side mounting points. They can be incorporated into a complete racing seat and harness installation using the appropriate vehicle-specific floor mount, seat base, or slider system. Always verify racing seat, harness, seat base, and mounting hardware compatibility before installation. Product Details Manufacturer: CMS Performance Product Type: Racing Seat Side Mounts Available Versions: Short or Tall Application: Compatible side-mount racing seats Harness Mounting: Integrated lap belt mounting points Adjustment: Multiple seat height, rake, and positioning options Finish: Black Use: Track, race, and performance vehicle applications Questions About CMS Performance Racing Seat Side Mounts Do these side mounts include racing harness lap belt mounting points?Yes. The CMS Performance Side Mounts incorporate dedicated mounting points for the left and right lap belts of a compatible racing harness. What is the difference between the Short and Tall versions?The Short version has a more compact profile for lower seating positions. The Tall version provides additional vertical adjustment range for installations requiring greater seat height or rake adjustment. Can I adjust the angle of my racing seat?Yes. The multiple mounting positions allow you to fine-tune both seat height and rake depending on your seat and installation. Will these fit every racing seat?They are designed for compatible side-mount racing seats. Always verify your specific racing seat's side-mount hole pattern before ordering. Do I still need shoulder and sub-strap mounting points?Yes. These side mounts provide lap belt mounting points. The shoulder belts and anti-submarine straps of a multi-point harness require their own appropriate mounting locations.

CMS Performance Racing Tow Strap Mount for Porsche Fits the Following Cars: Porsche 981 (All) Porsche 718 (All) Porsche 982 (All) Note: does not fit Porsche 992, 997, 987, or earlier Porsches with RH threaded tow hooks. When the unexpected happens at the race track, your tow straps get your Porsche back in the game without skipping a beat. To do that, you need to have a super strong, rock-solid connection to your car. That's where CMS Performance Racing Tow Strap Mounts come in. American Made Performance That Moves You Forward The CMS Performance Tow Strap Mount is a lightweight but ultra-strong bracket to mount your fabric racing tow straps (which can be added to your order) to your Porsche1. CNC machined from American billet 7075-T6 aerospace-grade aluminum, these workhorse mounts won't deform under load when things go sideways and you need to be pulled back into the race. Designed to fit the front and rear tow hook receivers on popular race and track-day Porsche models, these mounts accept Sparco or Sabelt racing tow straps with a 15mm mounting hole. Key Features: Precision Engineering: Designed and machined in the USA with a racer’s mindset for maximum performance, safety, and simplicity. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. But you can't sacrifice strength. These mounts are CNC milled from 7075-T6 aerospace-grade aluminum. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: CNC milled in the USA from American-forged aluminum billet Length (tip of threads to base of mounting flange): Front, 5.50 in. (139.7 mm); Rear, 4.75 in. (120.7 mm) Diameter (main shaft): 0.75 in. (19 mm) Tow strap hole diameter: 15mm Mounting threads: Porsche DIN RND405 M20 x 1/8" High-performance 7075-T6 aerospace aluminum Track-tested durability Optimized for professional motorsports Includes Allen bolt and machined tow strap spacer FAQs: Can this mount be used on the street or is it track only?This product is specifically optimized for track and race environments, but it can be used on street cars as well. How does it compare to similar products?Designed for maximum performance and the extraordinary rigors of racing, this tow strap mount orients your tow straps correctly to maximize their strength and effectiveness, offering superior durability and functionality over typical alternatives. Why Buy From Competition Motorsport? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success. 1 Racing tow straps can be added in the dropdown above.

CMS Performance Bolt-In Roll Bar for BMW E92 M3 This Roll Bar Fits the Following Cars: BMW E92 M3 (2008-2013) BMW E92 M3 Competition Package ZCP (2011-2013) BMW E92 M3 GTS (2011) Does not fit the E90 or E93 The Premium Roll Bar for BMW's Legendary E92 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW E92 M3. It is engineered to easily bolt into any E92 variant, giving you rollover protection while adding to the motorsport-derived style of the E92 M3. Engineered with a premium put on safety and structural rigidity, the exceptional design of the CMS Performance E92 M3 Roll Bar integrates perfectly with the car's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, energy dissipation, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Click Here for Installation Instructions A Roll Bar Design as Bulletproof as the M3 Itself CMS Performance designed the E92 roll bar with a one-piece main roll hoop featuring reinforced X-bracing along with a horizontal harness bar. (X-brace gussets can be added as an option add even more strength and rigidity.) The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) in most seating positions. Every CMS Performance E92 M3 roll bar bolts directly to the BMW's chassis, forming the rock-solid backbone of your roll-over and impact protection. Rearward kicker support angles are optimized for structural integrity and easy installation, while preserving your unobstructed rear view. Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Cutting Edge Materials and Direct Bolt-In The CMS Performance BMW E92 M3 Roll Bar is designed to bolt directly to the M3 chassis' strong points without the need for any modification of existing interior trim or use of backing plates underneath the car. Full 360o TIG welding throughout gives every CMS Performance roll bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched BMW M3 factory colors1. We also offer technical color powder coat finishes like the amazing Superchrome! Or, go with satin black for a more understated appearance. CMS Performance has over 5,000 custom powder coat colors to give you a truly customized look. Premium Materials, Design and Construction Set Us Apart Our unwavering focus on using cutting-edge materials, unsurpassed design and construction, and premium fit&finish has taken CMS Performance Roll Bars to the top of the industry. The BMW E92 M3 roll bar is one of the latest additions to our growing catalog, bringing safety, integrity, and beauty to your M3 whether on the street or at the track! BMW E92 M3 Roll Bar Options Main hoop X-brace gussets can be added for $200 CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them CMS Performance BMW E92 M3 Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-E92 Material: 1.75″ X .090" Docol R8 Advanced High Strength Steel tubing Design: one-piece main hoop and three-piece kickers ease installation Hardware: American-made Grade 8 hardware included BMW E92 M3 Roll Bar Features CNC-cut mounting plates Designed, built, and finished by CMS Performance in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any seat Detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. Installation requires removal of the factory rear seat bottom cushion. This product is intended for off-road race track use only.

CMS Performance Bolt In Roll Bar For BMW F87 M2 This Roll Bar Fits the Following Cars: BMW M2 (N55) 2016-2018 BMW M2 Competition (S55) 2019-2020 BMW M2 CS 2020-2022 The Strongest and Safest Roll Bar for the BMW F87 M2 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Cutting Edge Materials and American-Made Craftsmanship Click Here for Installation Instructions The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors1. You can choose an amazing technical color like Superchrome! Or satin black for a more stealthy appearance. We have over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track! CMS Performance BMW F87 M2 Roll Bar Options CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look. CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them. CMS Performance BMW F87 M2 Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-F87 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel tubing throughout Construction: One-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Included hardware: Grade 8, American made CMS Performance BMW F87 M2 Roll Bar Features Optional premium custom-designed rear seat delete for a factory-finished appearance Precision-cut mounting plates Designed, manufactured, and finished in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any seat Comes with detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road race track use only. MADE TO ORDER – PLEASE ALLOW APPROXIMATELY 2 WEEKS All roll bars are made to order and are not stocked as ready-to-ship items. Please allow approximately 2 weeks for production before your order ships. Production times are estimates and may vary slightly depending on current order volume.

CMS Performance Roll Bar For BMW M8 Coupe (F92) This Roll Bar Fits the Following Cars: BMW M8 Coupe (F92) 2020+ Does not fit BMW M8 Convertible (F91) or Sedan (F93) The Ultimate Roll Bar for the Mighty M8 The CMS Performance Roll Bar for the BMW M8 Coupe is a newest addition to our incredibly popular line of custom-designed bolt-in roll bars. Constructed from high-strength Docol R8 tubing, the CMS Performance Roll Bar for the BMW M8 takes safety, rigidity, and strength to another level. This is the strongest, highest quality bolt-in roll bar on the market for the BMW M8, period. In designing and building every CMS Performance roll bar, structural rigidity and impact protection are always our primary goals. That's why every CMS Performance roll bar is fully 360o TIG welded tubing made from 1.75-inch diameter Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the mounting surfaces are machined from solid steel plate. CMS Performance tailors the CMS Performance Roll Bar for the BMW M8 Coupe to take full advantage of the strongest chassis mounting points in the M8. The main roll hoop is X-braced with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps. Custom Installation Instructions Here Attention To Detail Is The Hallmark Of CMS Performance The cross-bar on the CMS Performance BMW M8 Roll Bar is designed to let you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position. The CMS Performance Roll Bar takes advantage of our use of high-strength steel to keep your rear view unobstructed by the added bracing other roll bars require due to the use of inferior materials. CMS Performance ties the main roll hoop and rear kickers together to form an extremely rigid cage structure, designed to attach to the strongest available chassis mounting points. This also adds rigidity to the M8 chassis. The rear kickers are a two-piece design using CNC-machined interlocking joints with double fasteners, making them incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Built Like a Tank. Finished Like a BMW. Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by our chassis fabricators and master welders, the CMS Performance Roll Bar for the BMW M8 is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This also lets us use powder coat colors we've matched to BMW's OEM paint colors for a truly customized aesthetic1. We also offer custom technical powder coat finishes like the amazing Superchrome! Or you can choose our rich satin black powder coat for a more low-key installation. Powder coating any color you choose is included in the price of your CMS Performance roll bar. Don't Settle For Anything Less Than The Best Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS. Add Premium Racing Harnesses To Your BMW You can add four-point racing harnesses from Sparco, Sabelt, or Schroth. These harnesses are an ideal safety upgrade from traditional three-point seat belts, designed for your BMW M8 seats (which do not have factory slots in the lower seat cushions for six-point harness sub-straps to pass through). Straightforward Installation Takes The Headache Out Of Roll Bars We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the BMW M8 to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS Performance Roll Bar Details: Manufacturer: CMS Performance Manufacturer Part: CPRB-F92 Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets. Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. Slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For BMW G87 M2 (2023+) We now have a version that fits factory sunroof Equipped Cars! The Premium Roll Bar for the Incredible New M2 Introducing the CMS Performance Roll Bar for the all-new, amazing G87 M2!  The powerful new M2 promises to be a hoot on the track-day circuit, so we got to work right away engineering a bolt-in roll bar that lives up to Competition Motorsport's tradition of building the strongest, safest, most beautifully constructed roll bars on the market. The new CMS Performance roll bar for the G87 delivers on all points! An M2 Roll Bar Designed for Performance and Safety Conceived from the ground up with a premium on safety and structural rigidity, the exceptional design of the CMS Performance M2 roll bar integrates perfectly with the M2's luxury/sport interior. CMS uses advanced Docol R8 Advanced High-Strength Steel tubing throughout our roll bars, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the M2 chassis, forming the backbone of the CMS Performance roll bar. Rearward kicker supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Click Here For Installation Instructions Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Cutting Edge Materials and American Craftsmanship The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched G87 M2 factory colors1. Or go with a custom technical color like the amazing Superchrome (check it out in the photos above!) We have access to over 5,000 powder coat colors, so if you need a color not on the list, just give us a call and we'll make sure your M2 roll bar has the look you like! A Beautiful Beast of a BMW M2 Roll Bar Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance roll bars to the top of the industry. The BMW G87 M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their new M2 to the track. CMS Performance BMW M2 Roll Bar Options The optional CMS Performance Rear Seat Delete Kit is custom-designed for the G87 M2, giving your roll bar installation a factory-finished look. Add Schroth Profi II ASM or Sabelt Steel Series four-point harnesses give you increased on-track safety using your factory BMW seats. CMS Roll Bar Harness Collarshelp keep your harness shoulder straps located right where you want them. CMS Performance BMW M2 Roll Bar Details Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo) Construction: fully TIG welded one-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Precision-cut mounting plates Designed, manufactured, and finished in the USA CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. Installation requires removal of the factory rear seats. This product is intended for off-road race track use only.

CMS Performance Bolt-In Roll Bar for BMW F82 M4 This Roll Bar Fits the Following Cars: BMW M4 F82 (2015-20) w/ carbon roof BMW M4 Competition F82 (2016-20) w/ carbon roof The Strongest and Safest Roll Bar for the M4 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M4 and M4 Competition. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M4's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Click Here for Installation Instructions Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Cutting Edge Materials and American Craftsmanship The CMS Performance BMW M4 Roll Bar is designed to bolt directly to the M4 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M4 factory colors1. Or you can choose an amazing technical color like Superchrome! Satin black is also available for a low-key stealthy appearance. We have over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M4 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M4 to the track! Optional CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them. CMS Performance BMW M4 Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-F82 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel tubing throughout Construction: One-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Included hardware: Grade 8, American made CMS Performance BMW M4 Roll Bar Features Precision-cut mounting plates Designed, manufactured, and finished in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any front seats Comes with detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. Slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

CMS Performance Bolt-In Roll Bar For BMW M4 This Roll Bar Fits the Following Cars: BMW M4 Coupe (G82) 2021+ BMW 4 Series Coupe (G22) 2021+ The Best Bolt-In Roll Bar for the BMW G82 M4, Period. The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the newest BMW M4 (the G82). CMS Performance engineers put a premium on safety and structural integrity, creating an exceptional design that integrates perfectly with the M4's luxury/sport interior. CMS Performance uses advanced Docol R8 Advanced High-Strength Steel tubing throughout every roll bar, giving them unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Detailed Installation Instructions Click Here Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Cutting Edge Materials and American Craftsmanship The CMS Performance roll bar for the G82 BMW M4 is designed to bolt directly to the strong points of the BMW chassis without the need for any modification of existing interior trim or use of backing plates. Adding the custom-designed CMS Performance rear seat delete gives the whole installation a seamless, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M4 factory colors1. You can choose an amazing technical color like Superchrome! Or satin black for a more stealthy appearance. We have over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M4 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M4 to the track! CMS Performance BMW G82 M4 Roll Bar Options CMS premium Rear Seat Delete Kit is custom-designed for the G82 M4, giving your roll bar installation a factory-finished look. CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them. CMS Performance BMW G82 M4 Roll Bar Details Manufacturer: CMS Performance Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel tubing throughout Construction: One-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Included hardware: Grade 8, American made CMS Performance BMW G82 M4 Roll Bar Features Optional premium custom-designed rear seat delete for a factory-finished appearance Precision-cut mounting plates Designed, manufactured, and finished in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any seat Comes with detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. Slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

CMS Performance Bolt-In Roll Bar For Chevy Camaro (Gen 5) This Roll Bar Fits the Following Cars: Chevy Camaro Coupe, all (2010-15) Does not fit the Camaro convertible The Strongest Roll Bar Available For The Gen 5 Camaro The CMS Performance Gen 5 Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were our primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows us to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. Our Camaro roll bar forms the perfect foundation for taking your safety up a huge notch. Roll Bar Safety and Strength Are The Priority Safety is the main reason to install a roll bar in the first place. As racers ourselves, we sweat the details. That's why we use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. Our beefy main hoop straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0° to -20°) and distance to the driver. Finally our rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. Objects in Your Rear View Mirror Are Clearly Visible A clear rear view is an important component of safety both on and off the race track. Our use of stronger materials and innovative design lets us keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Gen 5 Camaro roll bar is engineered with safety as our primary goal. American-Made Roll Bar For An American Icon Click Here for Installation Instructions Okay, another reason we install roll bars is that they look cool. We're gear heads, we get that. Each CMS Performance Gen 5 Camaro roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Camaro factory colors1, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS Performance roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS Performance Gen 5 Camaro Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-CamaroG5 Material: 1.75″ x .095" Docol R8 Advanced High-Strength Steel tubing Construction: fully 360o TIG welded Design: one-piece main hoop/kicker with detachable kicker feet Weight: 51 lbs. (23.2 kg) Rear seat delete: custom-made Shrader rear seat delete (optional) Gen 5 Camaro Roll Bar Features Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA American-made CNC machined solid steel interlocking clamps Allows full seat travel with any seat Straightforward installation and perfect fitment Comes with all necessary Grade 8 American-made hardware 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only. MADE TO ORDER – PLEASE ALLOW APPROXIMATELY 2 WEEKS All roll bars are made to order and are not stocked as ready-to-ship items. Please allow approximately 2 weeks for production before your order ships. Production times are estimates and may vary slightly depending on current order volume.