Bell HP77 EVO-IV 8860-2018 ABP Carbon Fiber Helmet The Bell HP77 EVO-IV 8860-2018 ABP Carbon Fiber Helmet delivers Formula-level protection, aerodynamic performance, cooling, and optical clarity for professional open-wheel and open-cockpit racing. Developed from Bell’s multiple Formula One World Championship-winning HP7 platform, the HP77 EVO-IV combines an ultra-lightweight carbon fiber shell with a narrow eyeport and integrated ballistic materials designed to provide additional protection from flying debris. Homologated to the FIA 8860-2018 ABP advanced helmet standard, the HP77 EVO-IV is engineered for drivers competing where helmet weight, high-speed stability, visibility, ventilation, and impact-energy management must perform at the highest level. Updated shell construction, a multi-piece energy-absorbing liner, optical-grade DSAF visor, and carefully managed airflow make the HP77 EVO-IV Bell’s premier helmet for demanding formula and exposed-cockpit applications. Championship-Proven Bell HP7 Heritage The HP77 EVO-IV is based on the Bell HP7, a helmet platform proven through multiple Formula One World Championships. Bell used this foundation to create an ABP-specific helmet for drivers who need the highest level of frontal protection available within the FIA 8860-2018 helmet standard. Its compact carbon shell, aerodynamic profile, narrow eyeport, advanced ventilation, and integrated cockpit-system channels reflect the requirements of professional drivers competing at extreme speeds. Every major component is designed to work as part of a complete protective system without adding unnecessary exterior bulk or weight. FIA 8860-2018 ABP Advanced Helmet Protection The Bell HP77 EVO-IV is homologated to the FIA 8860-2018 ABP standard. ABP stands for Advanced Ballistic Protection and identifies helmets that incorporate additional protection around the frontal area above the visor. The HP77 EVO-IV uses a visor opening positioned approximately 12 mm lower than the original HP7-style opening. High-strength ballistic materials are integrated into the reinforced frontal structure to increase protection from medium-sized debris and objects that may strike the helmet in an open cockpit. The reduced eyeport is an intentional part of the certified ABP design. Adding an external visor panel or reinforcement strip to a conventional helmet does not convert that helmet into an FIA 8860-2018 ABP model. The complete helmet must be manufactured, tested, labeled, and homologated in its ABP configuration. High-Strength and High-Modulus Carbon Fiber Shell The HP77 EVO-IV shell is manufactured using high-strength and high-modulus carbon fibers selected to provide excellent structural performance at an exceptionally low weight. The shell is finished in exposed matte carbon, giving the helmet a purposeful appearance without disguising its advanced composite construction. Reducing helmet weight can help limit strain on the driver’s head and neck during repeated high-g braking, cornering, impacts, and long race sessions. The compact shell profile also supports improved cockpit clearance and allows the helmet to move more cleanly through high-speed airflow. Multi-Density, Multi-Piece Energy-Absorbing Liner Inside the carbon shell is an advanced multi-density, multi-piece liner engineered to manage different impact loads. Rather than relying on a single uniform layer, the liner uses multiple sections and material densities to help absorb and distribute impact energy across the helmet structure. This construction allows Bell to tune individual areas of the liner according to the protection required around the crown, sides, rear, chin bar, and frontal sections of the helmet. The result is a complete impact-management system designed around the demanding performance requirements of FIA 8860-2018 ABP. Narrow ABP Eyeport for Open-Cockpit Protection The HP77 EVO-IV has a noticeably narrower eyeport than a conventional full-face racing helmet. The reduced opening allows the reinforced upper frontal structure to extend farther downward, increasing the protected area above the visor. Although the eyeport is compact, its shape is developed to preserve the forward and peripheral visibility needed in formula and open-cockpit racing. Drivers should verify that the ABP eyeport provides suitable visibility for their seating position, mirrors, steering-wheel display, and cockpit layout before competing. Optical-Grade Double Screen Anti-Fog Visor The Bell HP77 EVO-IV includes an optical-grade, injection-molded Double Screen Anti-Fog visor. Commonly known as DSAF, this visor construction uses two viewing layers to create an insulating barrier that helps control condensation across the shield. The DSAF system is especially valuable in wet weather, cool temperatures, high humidity, driver changes, and other conditions where rapid temperature differences can cause a conventional visor to fog. Injection molding also supports consistent thickness and optical quality across the curved viewing area. The HP77 EVO-IV uses Bell SE077 3 mm replacement shields. Drivers should confirm that any clear, tinted, mirrored, or specialty visor is specifically listed for the HP77 EVO-IV and its installed pivot hardware. 12-Channel Top and Chin-Bar Ventilation Bell equips the HP77 EVO-IV with a powerful top and chin-bar ventilation system incorporating 12 intake and extraction channels. Fresh air enters through the upper and lower intake areas, moves through the helmet, and helps carry heat and moisture away from the driver. The installed intake system includes a two-part center intake and low-profile side components. The low-profile design helps maintain airflow while reducing unnecessary aerodynamic disturbance around the top of the helmet. Effective ventilation can improve driver concentration and comfort while also supporting the performance of the anti-fog visor system. Actual airflow will vary according to vehicle speed, windscreen design, cockpit turbulence, head position, and installed aerodynamic accessories. Aerodynamic Shell and Visor Integration The shell and visor were developed together to improve aerodynamic performance in exposed high-speed airflow. The smooth transition between the visor, shell, intakes, and rear profile helps manage turbulence around the helmet and reduce unwanted lifting or buffeting. Bell also designed the helmet to help reduce internal wind noise and improve the energy-management capability of the complete shell and visor system. Optional top spoilers, top gurneys, and chin-bar gurneys are available separately. These components allow the helmet’s aerodynamic balance to be adjusted for different cockpit designs, windscreens, seating positions, and airflow conditions. Integrated Communication and Hydration Channels Channels integrated into the HP77 EVO-IV facepiece provide multiple routing options for radio and hydration equipment. These passages help teams install compatible communication wiring or a drinking tube without placing excessive pressure between the helmet liner and the driver’s head. A frontal chin-bar opening for a drinking tube is available as an optional special-order configuration. Radio electronics, microphones, earbuds, wiring, connectors, drink tubes, valves, and hydration components are not included unless specifically selected with the helmet. Any installed communication or hydration equipment must be routed carefully so it does not interfere with helmet fit, visor operation, chin-strap security, visibility, or head-and-neck-restraint use. Factory-Installed HANS Anchors Factory-installed HANS anchors are included as original equipment. These attachment points allow a compatible head-and-neck restraint to be connected to the helmet using the restraint manufacturer’s approved tether system. The anchors should not be removed, altered, repositioned, or replaced with unapproved components. Always follow the helmet and restraint manufacturers’ instructions and confirm the applicable head-and-neck-restraint requirements with the sanctioning body. Synthetic Rubber Eyeport Seal A synthetic rubber gasket surrounds the visor opening to help reduce the entry of water, dust, rubber debris, and other contaminants. When the visor is properly closed, the gasket creates a more controlled seal between the shield and helmet shell. The eyeport gasket should be inspected regularly for cuts, deformation, looseness, or contamination. Damaged seals should be replaced with the correct Bell component rather than repaired with adhesive or non-approved material. Bell HP77 EVO-IV Helmet Features FIA 8860-2018 ABP advanced helmet homologation Developed for professional formula and open-cockpit racing Based on Bell’s multiple Formula One World Championship-winning HP7 platform Ultra-lightweight high-strength and high-modulus carbon fiber shell Matte exposed carbon fiber finish Very narrow ABP eyeport Visor opening positioned approximately 12 mm lower for increased frontal protection Integrated ballistic materials above the visor opening Advanced multi-density, multi-piece energy-absorbing liner Optical-grade injection-molded DSAF visor Double-screen construction for enhanced anti-fog performance Top and chin-bar ventilation system 12 air-intake and extraction channels Installed two-part center intake Installed low-profile side air intakes Shell and visor designed for aerodynamic performance Designed to help reduce internal noise Integrated channels for communication and hydration equipment Optional frontal drinking-tube opening available by special order Optional top spoiler and aerodynamic gurneys available separately Factory-installed HANS anchors Synthetic rubber eyeport gasket Bell HP helmet bag included Bell HP77 EVO-IV Specifications Manufacturer: Bell Racing Model: HP77 EVO-IV Helmet Type: Full-face ABP auto-racing helmet Primary Application: Formula and open-cockpit racing Homologation: FIA 8860-2018 ABP Shell Material: High-strength and high-modulus carbon fiber Exterior Finish: Matte carbon fiber Liner: Multi-density, multi-piece energy-absorbing construction Visor: Optical-grade injection-molded Double Screen Anti-Fog visor Compatible Shield: Bell SE077 3 mm shield Shield Pivot Kit: Bell SV for SE07 and SE077 applications Ventilation: 12 intake and extraction channels HANS Anchors: Factory installed Standard Interior: Dark grey high-strength, high-comfort flame-resistant fabric Available Sizes: 54, 55, 56, 57, 58 and 59+ Included Accessory: Bell HP helmet bag Standard and Custom Interior Fabric Options The standard HP77 EVO-IV interior uses dark grey high-strength, high-comfort flame-resistant fabric. Alternative interior colors may be ordered for drivers who want a personalized helmet or need an interior color that complements a custom-painted exterior. Special-order interior colors may include: Black White Tan Red Purple Blue Green Neon Yellow Pink Orange Alternative interior colors are special-order options and may require additional production time and added cost. Availability should be confirmed before ordering. Special-order configurations may not be eligible for cancellation, return, or exchange once production has begun. Optional HP77 EVO-IV Accessories Bell SE077 clear and specialty visors Compatible visor tear-offs Bell SV shield pivot components Top aerodynamic spoiler Top gurney accessories Chin-bar gurney accessories Drink-tube components Communication-system components Replacement eyeport gasket and service components Accessory compatibility can vary according to helmet size, production revision, visor-lock system, and intended installation. Confirm the exact HP77 EVO-IV configuration before purchasing replacement visor hardware or aerodynamic components. How to Measure for the Bell HP77 EVO-IV Use a soft measuring tape to measure around the widest circumference of the head. Position the tape approximately one inch above the eyebrows, pass it above the ears, and wrap it around the widest point at the rear of the head. Keep the tape level and comfortably snug without pulling it excessively tight. Take the measurement two or three times and use the largest consistent result when reviewing the Bell helmet sizing chart. The HP77 EVO-IV should create firm, even pressure around the crown, sides, rear, and cheeks. The helmet should not rotate independently when the chin strap is secured. A new helmet may feel tighter than expected because the interior padding will settle slightly with use, but it should not create sharp or painful pressure points. Because the HP77 EVO-IV uses a narrow ABP eyeport, drivers should also confirm that their eyes align correctly within the opening and that the helmet provides adequate forward and peripheral visibility in their normal driving position. Sizing Chart Questions About the Bell HP77 EVO-IV Helmet Is the Bell HP77 EVO-IV certified to FIA 8860-2018 ABP?Yes. The HP77 EVO-IV is homologated to the FIA 8860-2018 ABP advanced helmet standard. Confirm that this certification satisfies the current requirements of your sanctioning body, championship, and vehicle class. What does ABP mean on a racing helmet?ABP stands for Advanced Ballistic Protection. An ABP helmet has additional certified protection around the frontal area above the visor to help protect an open-cockpit driver from flying debris. Why is the HP77 EVO-IV eyeport so narrow?The narrow opening allows the reinforced frontal structure and ballistic materials to extend farther downward above the visor. This reduced eyeport is an intentional part of the FIA 8860-2018 ABP design. Can an ABP visor or reinforcement panel convert a standard helmet into an ABP helmet?No. The helmet must be manufactured, tested, and labeled as an ABP model. Adding an accessory visor panel or reinforcement strip does not change the helmet’s FIA homologation. Is the HP77 EVO-IV only for Formula One?No. It is designed for professional formula and open-cockpit racing, but it may also be used in other applications where FIA 8860-2018 ABP is permitted or required. Always check the current rulebook before ordering. Can the HP77 EVO-IV be used in a closed-cockpit race car?It may be permitted when its certification satisfies the applicable rules. However, the narrow ABP eyeport and open-cockpit-focused configuration may not be necessary for every enclosed vehicle. What is a DSAF visor?DSAF means Double Screen Anti-Fog. The visor uses two viewing layers to create an insulating barrier that helps reduce condensation during wet, cold, or humid conditions. Which replacement visor fits the HP77 EVO-IV?The listed compatible replacement shield is the Bell SE077 3 mm visor. Verify the installed pivot and locking hardware before ordering because Bell may introduce production updates. Are tinted or mirrored visors available?Bell offers compatible visors in multiple finishes for different lighting conditions. Only a visor specifically listed for the HP77 EVO-IV and its hardware should be installed. Does the HP77 EVO-IV include tear-offs?Compatible tear-offs may be installed on properly equipped visors, but tear-off stacks are not included unless specifically stated. Are the aerodynamic spoilers included?No. The top spoiler, top gurneys, and chin-bar gurneys are optional accessories sold separately. Does the helmet include HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment. Can a radio system be installed in the HP77 EVO-IV?Yes. Integrated channels in the facepiece provide routing options for compatible radio wiring and communication components. Electronics and connectors are sold separately unless otherwise stated. Can a drinking tube be added?Yes. The helmet includes internal routing provisions, and a frontal chin-bar drinking-tube opening may be available as a special-order option. What interior color comes standard?Dark grey high-strength, high-comfort flame-resistant fabric is standard. Alternative colors are available by special order and may add cost and production time. What comes with the Bell HP77 EVO-IV?The helmet includes its installed visor, factory HANS anchors, ventilation components, standard interior, and a Bell HP helmet bag. Optional aerodynamic, communication, hydration, and replacement visor components are sold separately. How should the carbon shell be cleaned?Use a soft cloth and a cleaner suitable for premium automotive finishes. Do not use abrasive pads, harsh solvents, or chemicals that could damage the shell coating, visor, gasket, or helmet components. How should the interior be cleaned?Use mild soap, water, and a soft cloth to carefully clean the interior fit padding. Allow the helmet to dry completely before placing it in the helmet bag or storing it.  

Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO-IV is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell Bell HP7 EVO-IV meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO-IV Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Details Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO-IV Carbon Fiber Additional Features Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Sizing Chart Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell HP7 EVO III Carbon Fiber FIA 8860-2018 Helmet The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO III is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Details Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade¬†SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO III Carbon Fiber Additional Features Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell HP10 Rally Helmet Introducing the Bell HP10 Rally helmet - the epitome of advanced helmet technology, drawing inspiration from Bell's esteemed HP7 Advanced Helmets. Proudly FIA 8860-2018 approved, this modern masterpiece is not just an open-face rally helmet; it's a statement of performance. Crafted with an ultra-lightweight carbon shell, it features a quick-detach Half Chin-Bar (HCB), adjustable carbon fiber peak, and a state-of-the-art adjustable integrated sunscreen. Prioritizing both comfort and sound insulation, it stands as the go-to choice for rally drivers and co-drivers aiming for the pinnacle of their craft. Bell Racing Helmets dedicated R&D team collaborated with audio experts and elite rally drivers, ensuring unparalleled sound insulation and communication. Embedded with ZeroNoise electronics, potent speakers, and a noise-cancelling microphone, the Bell HP10 Rally helmet promises unmatched safety, comfort, and communication. Bell HP10 Rally Helmet Features Homologation: FIA 8860-2018 Exterior: matte finish carbon fiber Interior: dark grey high-strength Comfort FR fabric. Open face design with ultra-lightweight advanced full carbon shell. Removable carbon Half Chin-Bar (HCB) easily detaches for fast airway access in an emergency. ZeroNoise electronics, high-power speakers, and noise-cancelling mic integrated in HCB. Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance. Factory installed HANS anchors. Adjustable integrated anti-scratch sunscreens: ML Red Mirror (M10S-Short) installed, Dark Smoke (M10-Long) supplied in the box. Removable cheek pads with multi-density advanced materials for optimal comfort. Ultra-reliable, heavy duty in-molded female Nexus connector. Adjustable carbon fiber sun peak. Air extraction holes maximize cooling. Bell HP10 Rally Helmet Size Chart Bell HP10 Rally Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Sizes (in cm): 54, 55, 56, 57, 58, 59, 60, 61, and 61+.

Bell Helmets HP6 EVO-II  Carbon Fiber Racing Helmet Pre-order: Ships after Q1. Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems.The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 EVO-II 8860-2018 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Manufacturer Part: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation Bell HP6 8860-2018 Carbon Fiber Helmet Sizing Chart  Bell HP6 8860-2018 Carbon Fiber Helmet FAQs What certification does the HP6 meet? The helmet is homologated to FIA 8860-2018, the strictest current motorsport helmet standard. Does this helmet come with accessories? Yes, it includes a clear SE06 DSAF shield (installed), Bell HP helmet bag, tear-off posts, and a hex wrench key. Can the HP6 be used with a cooling system? Yes, the top ventilation slots accept forced-air kits, compatible with Maglock quick disconnects. Are interior color options available? Yes, Bell offers alternative colors such as Tan, White, Red, Purple, Blue, Green, and Neon Yellow by special order. In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems.  The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Manufacturer Part: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronic Ear Cup Speakers Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C/EC 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Size Chart In The Box of Your Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Manufacturer Part: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Carbon Fiber Helmet Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation Bell HP6 8860-2018 Carbon Fiber Helmet Size Chart  In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell HP10 Carbon Open Face Helmet Introducing the Bell HP10 Carbon Open Face Helmet, the ultimate choice for rally racing aficionados seeking uncompromised safety, comfort, and performance. Crafted with precision and innovation, the new HP10 Carbon incorporates the advanced technology of Bell's HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate open-face helmet protection. The Bell HP10 Carbon features an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable integrated sunscreen, and highly comfortable professional fit. The HP10 is perfect for racers who want the feeling of an open-face helmet but demand outstanding comfort and superior performance. Constructed from advanced high-strength carbon fiber, the HP10 Carbon boasts exceptional strength and durability while remaining incredibly lightweight. This means you can race comfortably for extended periods without the burden of a heavy helmet. Its open face design provides optimal visibility, allowing you to stay fully aware of your surroundings and make split-second decisions on the challenging terrain encountered during rally races. The HP10 Carbon also features a superior ventilation system, ensuring a constant flow of fresh air to keep you cool and focused on conquering the toughest off-road stages. With its FIA 8860-2018 certification, the Bell HP10 Carbon Open Face Helmet provides the peace of mind that you're equipped with top-tier protection, meeting the strictest safety standards for motorsports. Elevate your rally racing experience with this premium helmet that merges style, comfort, and unmatched safety, making it the ideal choice for off-road racing enthusiasts who demand the best. Bell HP10 Carbon Fiber Helmet Features Homologation: FIA 8860-2018 approved. Exterior: matte finish carbon fiber. Interior: dark grey high-strength Comfort FR fabric. Ultra-lightweight advanced full carbon shell. Factory-installed HANS anchors. Multi-density, multi-piece liner maximizes energy absorption and impact performance. Adjustable carbon fiber sun peak. Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) installed plus Dark Smoke (M10-Long) in the box. Removable cheek pads with multi-density materials for optimal comfort. Flexible sound-insulating ear muffs provide excellent sound insulation. Air extraction holes maximize cooling. Bell HP10 Carbon Fiber Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Bell HCB (Half Chin Bar) compatible. Sizes (in cm): 54, 55, 56, 57, 58 ,59, 60, 61, and 61+. Bell HP10 Carbon Fiber Helmet Sizing Chart 

Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet Please note: some Bell Racing helmets are in short supply with more expected by mid- to late-June 2026. If you have need for one right away, please give us a call at (844) 438-7244 before placing your order so we can confirm we have your size in stock. Ultralight carbon performance, SA2025 certified The Bell RS7 ULTRA X-Lite is built for serious racers who demand the lightest, strongest, and safest gear on the market. With a carbon fiber shell derived from Bell’s Formula 1 technology, this helmet sets a new standard in comfort and protection. Certified to the latest Snell SA2025 and FIA 8859-2024 standards, it’s your ticket to staying ahead of the competition while shaving precious grams off your headgear. Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet Features Aerospace grade ultra-lightweight carbon fiber shell, precision molded for maximum strength and minimal weight Certified to Snell SA2025 and FIA 8859-2024 standards, meeting the latest safety requirements Equipped with Bell Racing Helmets SmartLock mechanism Advanced ventilation with 14 intake and exhaust channels for airflow during intense races Aerodynamic design derived from Bell’s HP7 F1 helmet platform Comes standard with a clear SE07 anti-fog visor and pre-installed HANS anchors Integrated hydration and communication system compatibility (sold separately) Interior optimized for comfort and reduced noise, with replaceable padding options Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet Size Chart Bell RS7 ULTRA X-Lite SA2025 Helmet FAQs How does the X-Lite differ from the standard RS7 ULTRA? The X-Lite uses a more advanced carbon weave and pressure-molded construction, making it lighter without compromising safety. Is this helmet approved for pro-level racing? Yes, the RS7 ULTRA X-Lite is Snell SA2025 and FIA 8859-2024 certified and suitable for all levels of auto racing requiring that standard. Can I add hydration or radio systems? Absolutely. The helmet is designed with integration ports for hydration and communication accessories. Secure your advantage on track with the Bell RS7 ULTRA X-Lite carbon fiber helmet. Order now to guarantee your spot in line and be among the first to race with Bell’s most advanced lightweight helmet.

Bell RS7 ULTRA Lite Carbon Fiber Helmet SA2025 Cutting-Edge Protection in a Lightweight Package Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Ultra combines an aerospace-grade carbon shell, reinforced energy absorbing liner system, and the performance features of the HP7 to create the most advanced, lightweight Snell rated helmet that can be used in some of North America’s most demanding forms of racing. The RS7 Ultra Lite comes equipped with a Double Screen Anti-Fog (DSAF) visor and Bell Racing SmartLock Mechanism for optimal visibility and security. Bell RS7 ULTRA Lite Carbon Fiber Helmet SA2025 Size Chart Bell RS7 ULTRA Lite Carbon Fiber SA2025 Helmet Details Manufacturer: Bell Helmets Manufacturer part number: 1237A Certification: Snell SA2025 and FIA 8859-2024 Construction: aerospace grade ultra-lightweight carbon shell Color: carbon matte clear Shields: Bell 3mm SE07 Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF) Sizes: 54cm to 61cm+ HANS anchors: factory installed Ear cups: included Pivot kit: SV (SE07, SE077) Bell RS7 ULTRA Lite Carbon Fiber Helmet SA2025 Features Advanced multi-density, multi piece liner to maximize energy absorption and impact performance Multi-purpose fit system that can be used with or without ear cups (ear cups included) Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Interior ventilation channels enhanced to maximize airflow Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Integrated channels in face piece offer multiple options to install drink tube and radio systems Rear spoilers, top gurney, and chin bar gurneys available separately Forced air and top air attachments available separately Factory installed Hans anchors as original equipment Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Equipped with Bell Racing SmartLock Mechanism Additional Bell RS7 ULTRA Lite Carbon Fiber helmet shields available here