Bell
Bell GT6 RD Carbon-4C Helmet FIA 8859-2024/SA2025
$2,558.00
Bell GT6 RD Carbon-4C Helmet
This is a pre-order, shipping after Q3 2025.
The Bell GT6 RD Carbon-4C is a closed-cockpit performance helmet built for drivers who want ultra-light carbon construction with integrated communications and hydration capability out of the box. A wide eye port, refined aerodynamics, and efficient ventilation keep vision clear and fatigue low through long stints.
4C: Carbon Composite 4 Layer Construction
On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a four-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar or fiberglass) in multiple layers.
The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77, which use pure carbon/advanced aerospace layups). In this helmet, "RD-4C” means the helmet is a Carbon Composite 4-layer shell with RD (radio/drink) kit integration.
Designed for GT and Closed-Cockpit Racing
The RD configuration includes electronic ear cups and drink-tube routing for clean, reliable comms and hydration in noisy, high-heat cabins. Internal channels manage airflow across the crown and face, and the shell profile is tuned for stability with optional aero accessories.
Bell GT6 RD Carbon-4C Helmet Details
Manufacturer: Bell Helmets
Construction: lightweight 4C carbon-composite shell
Configuration: RD (integrated electronic ear cups and hydration routing)
Interior: fire-resistant comfort liner
Orientation: closed-cockpit optimized, wide eyeport
Hardware: factory-installed M6 HNR terminals
Finish: gloss carbon-composite
Shield: clear shield installed (tinted/iridium options available separately)
Key Features
Ultra-light carbon shell for reduced fatigue and quick head-turn response
Multi-density, multi-piece liner for impact energy management
Integrated channels for radio wiring and drink-tube routing
Wide eye port for enhanced lateral vision in GT cars
Efficient intake/extraction paths to promote airflow in warm cabins
Compatible with optional top-forced-air and aero kits (rear spoiler, gurneys)
Sealed eye port gasket to help reduce dust and moisture ingress
Bell GT6 RD Carbon-4C Helmet FAQs
What does “RD” mean on this model?RD indicates the helmet is set up for radio communications and drink-tube routing, with electronic ear cups installed for improved audio clarity.
Is this helmet optimized for closed-cockpit use?Yes. The GT6 platform is tailored for GT and closed-cockpit cars, with a wide eyeport for peripheral vision and venting tuned for in-car airflow.
Can I connect a top forced-air system?Yes. The shell accepts optional top forced-air kits, allowing you to feed cooled air into the helmet for longer stints and hotter events.
Are hydration and radio systems included?The RD configuration provides integrated routing and ear cups; specific drink and radio hardware is typically added to suit your team’s setup.
Does it include HNR anchor points?Yes. Factory-installed M6 HNR terminals are fitted for head-and-neck restraint compatibility.
Which shield options are available?A clear shield is installed. Tinted and iridium options are available separately to suit lighting conditions and driver preference.
Lightweight carbon construction, integrated comms/hydration, and closed-cockpit visibility make the Bell GT6 RD Carbon-4C a smart upgrade for serious GT drivers. Order yours from Competition Motorsport and get race-ready support.
Bell
Bell RS7 Carbon Fiber Helmet FIA 8859-2024/SA2025
$2,416.00
Bell RS7 Carbon Fiber SA2025 Racing Helmet
This is a pre-order, shipping after Q3 2025.
The Bell RS7 Carbon Fiber SA2025 takes its design straight from the flagship Bell HP7, delivering pro-level performance at a more accessible price point. Built with Bell’s proprietary high-pressure molding process, this ultra-light carbon fiber helmet offers maximum strength, acoustic comfort, and aerodynamic efficiency. With 14 intake and exhaust channels, the RS7 ensures cool air flows in while hot air is pushed out, keeping you focused on the race. A hollow rubber gasket keeps air, water, and dust out, making it the perfect choice for demanding track environments.
Bell RS7 Carbon Fiber Helmet Details
Manufacturer: Bell Helmets
Manufacturer Part Number: 1204A
Homologation: Snell SA2025
Sizes: 54cm to 61+cm
Interior: Grey Comfort-Max FR® moisture-wicking fabric
Shield: Clear SE07 3mm DSAF shield with anti-fog insert
Included: M6 HNR terminals and hex wrench
Notable Features
14 intake and exhaust channels provide maximum ventilation
Multi-piece, multi-density liner for superior impact absorption at all speeds
Aerodynamic stability at high speeds with optional chin bar, top Gurneys, and rear spoiler
Optional top forced-air kits available: eyeport, 8-hole, and 10-hole configurations
Integrated channels support drink tube and radio communication systems
Pro-style foam interior with contoured cheek pads for a custom race fit
Narrow eye port for reduced glare and enhanced safety in open-track conditions
What’s In The Box
Bell RS7 Carbon Fiber SA2025 helmet
Clear SE07 3mm DSAF shield (installed)
M6 HNR terminals
Hex wrench key
Bell RS7 Carbon Fiber Helmet FAQs
Is the Bell RS7 Carbon Fiber helmet Snell approved? Yes, it carries the Snell SA2025 homologation, making it legal for track days, club racing, and sanctioned events across North America.
What makes the RS7 different from the Bell HP7? The RS7 uses the same design as the HP7 but is homologated to Snell SA2025 instead of FIA 8860. It delivers top-level performance at a more affordable price point.
Can this helmet integrate with a drink tube and comms system? Yes, the RS7 has built-in channels for hydration and radio communication systems, ideal for endurance or pro-level racing.
Does the RS7 come with forced-air capability? The helmet includes top forced-air intake inserts that can be customized with optional eyeport, 8-hole, or 10-hole kits for external cooling systems.
Step up to the Bell RS7 Carbon Fiber SA2025 Helmet and experience lightweight strength, pro-level aerodynamics, and advanced ventilation designed for serious racers.
Bell
Bell GT6 Carbon Fiber Helmet FIA8859-2024/SA2025
$2,274.00
Bell GT6 Carbon Fiber Auto Racing Helmet FIA8859-2024/SA2025
This is a pre-order, shipping after Q3 2025.
The Bell GT6 Carbon Fiber Helmet brings modern design, lightweight protection, and advanced safety certification together for serious closed-cockpit racers. Inspired by the top-tier HP6, the GT6 Carbon combines a sleek carbon shell with a wide eye port, customizable ventilation, and optional communication integration for drivers who demand peak performance and comfort.
Discover the Bell GT6 Carbon Fiber Helmet – Your Competitive Edge
Built to the latest FIA8859-2024 and Snell SA2025 standards, the Bell GT6 Carbon is designed for endurance, GT, and touring car drivers. Its lightweight carbon construction enhances strength without sacrificing comfort, while multiple cooling and communication options make it a versatile tool for long stints behind the wheel. Whether you’re chasing podiums or logging training laps, this helmet ensures maximum focus and protection.
Features
• FIA8859-2024 and Snell SA2025 approved• Lightweight carbon-composite shell with gloss finish• Wide eye port for superior visibility in closed-cockpit racing• Multi-density liner for maximum energy absorption and impact performance• Direct-flow chin and extraction vents for excellent ventilation• Compatible with optional top- and side-air intakes• Integrated channels for drink tube and radio system installation• Optional ear cups available for improved noise insulation• Interior finished in dark grey FR fabric (other colors available special order)• Factory-installed HANS® anchors for head-and-neck restraint systems• Compatible with Bell SE06 3mm DSAF shield system• Includes tear-off posts and hex wrench
Bell GT6 Carbon Fiber Helmet FAQs:
What certifications does the Bell GT6 Carbon have? The helmet meets both FIA8859-2024 and Snell SA2025 standards, making it approved for use in major series worldwide.
Can I connect a cooling system to this helmet? Yes, the GT6 Carbon can be paired with optional top- and side-air intakes and external cooling systems for endurance use.
What comes in the box? The package includes the helmet, a clear SE06 shield (installed), tear-off posts, a hex wrench, and a Bell drawstring helmet sack.
Is this helmet compatible with HANS devices? Yes, it comes with factory-installed M6 threaded HANS anchors ready for use with your device.
Lightweight, strong, and engineered for closed-cockpit racing, the Bell GT6 Carbon FIA8859-2024/SA2025 helmet is a trusted choice for competitive drivers. Order today and upgrade your racing safety with one of Bell’s finest designs.
Bell
Bell MAG-10 Rally Carbon Fiber Helmet FIA8859-2024/SA2025
$2,132.00
Bell MAG-10 Rally Carbon Fiber Helmet
Expected ETA: November 2025
The Bell MAG-10 Rally Carbon is a premium open-face helmet engineered specifically for rally drivers who demand lightweight performance, maximum ventilation, and seamless integration with communication systems. Certified to the Snell SA2025 standard, this helmet blends modern carbon fiber construction with cutting-edge features to keep you cool, comfortable, and fully connected during high-intensity rally stages.
Lightweight carbon fiber shell, built for rally
Features
• Ultra-lightweight carbon fiber composite shell for superior strength-to-weight ratio
•FIA8859-2024 Snell SA2025 approved for auto racing and rally use
• Advanced multi-density liner for optimal impact absorption and protection
• Adjustable high-efficiency ventilation system designed for rally environments
• Integrated ZeroNoise® electronics with high-quality speakers and noise-canceling microphone
• Compatible with common intercom systems used in professional rallying
• Open-face design optimized for communication, comfort, and cooling
• Adjustable sun peak with anti-dazzle strip for better visibility in changing light conditions
• Removable and replaceable cheek pads and liner for easy cleaning and a custom fit
• Pre-installed Hans® anchor points for head and neck restraint compatibility
Bell Helmet Chart
Why choose the Bell MAG-10 Rally Carbon?
Developed for rally drivers and co-drivers, the MAG-10 Rally Carbon delivers best-in-class communication, cooling, and safety in a lightweight carbon package. Its integrated intercom system and precision ventilation make it a favorite among professionals competing in demanding environments where clarity and endurance are critical. If you’re looking for the perfect balance of comfort, performance, and connectivity, this helmet sets the standard.
Bell MAG-10 Rally Carbon Fiber Helmet FAQs:
Does the helmet include built-in communications? Yes, it comes with factory-installed ZeroNoise® electronics, including speakers and a noise-canceling microphone, compatible with most intercom systems.
What makes the carbon fiber version different? The carbon shell reduces overall weight while increasing strength, providing less neck fatigue during long rally stages.
Is it compatible with Hans devices? Yes, Hans® anchor points are factory-installed, ensuring compliance with modern safety systems.
Who is this helmet best for? Rally drivers and co-drivers who need lightweight protection, premium comfort, and high-quality communication in a professional motorsport environment.
Step up to the Bell MAG-10 Rally Carbon Fiber Helmet FIA8859-2024/SA2025 and experience the ultimate in rally-ready performance, communication, and safety. Order today and get race-proven protection for your next
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Schuberth
Schuberth SP1 Carbon Fiber Helmet SA2020
$2,131.00
$3,125.00
Schuberth SP1 Carbon Fiber Helmet
Carbon Fiber Beauty Snell SA2020 & FIA 8859-2015 Certified
With nearly 100 years dedicated to developing head protection solutions, and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series,  Schuberth presents its first motorsport helmet with both FIA 8859-2015 and Snell SA2020 certifications: the Schuberth SP1 Carbon Fiber Auto Racing helmet.
Schuberth SP1 Carbon Fiber Helmet Aerodynamics & Ventilation
The SP1 Carbon Fiber Helmet was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air.
Schuberth SP1 Carbon Fiber Helmet Communication System Ready
Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms.
Schuberth SP1 Full Carbon Fiber Shell & 3mm Visor Shield
Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The Schuberth SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design.
The Schuberth SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed.
Schuberth SP1 Carbon Fiber Helmet Available Accessories
Schuberth SP1 Top Air Available Here
Schuberth SP1 Individual Vent Scoops Available Here
Schuberth SP1 Visors Available here
Schuberth SP1 Scoops Available Here
Schuberth SP1 Carbon Fiber Helmet Weight
Small shell (XS to L): 3.0 lb (1.36 kg)
Large shell (L+ to XXL): 3.2 lb (1.46 kg)
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Bell
Bell RS7C LTWT Carbon Fiber Helmet SA2020
$1,990.00
$2,842.00
Bell RS7C LTWT Carbon Fiber Helmet SA2020
Cutting-Edge Protection in a Lightweight Package
Based on the design of the range-topping Bell HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The Bell RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet.
Bell RS7C LTWT Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part number: 1237A
Certification: Snell SA2020
Construction: aerospace grade ultra-light carbon fiber shell
Color: carbon matte clear
Shield: Bell 3mm SE07
Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF)
Sizes: 54cm to 61cm+
HANS anchors: factory installed
Ear cups: included
Pivot kit: SV(SE07, SE077)
Bell RS7C LTWT Additional Features:
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Multi-purpose fitment system with or without included ear cups
Top and chin bar ventilation system with 14 intake and extraction channels
Interior ventilation channels maximize air flow
Shell and shield optimized to improve aerodynamic performance
Integrated channels for drink tube and radio systems
Top spoiler, top gurney and chin-bar gurney available separately
Top air attachments available separately
Additional Bell RS7C LTWT Carbon Fiber helmet shields available here
Bell
Bell BR8 Carbon Fiber Helmet FIA 8859-2024/SA2025
$1,989.00
Bell BR8 Carbon Fiber Auto Racing Helmet SA2025
This is a pre-order, shipping after Q3 2025.
The Bell BR8 Carbon is a versatile, ultra-light helmet built for off-road and dirt track racing. Its configurable forced-air system lets you run standard, left or right side-air, left or right three-quarter top-air, or top-air using the included kit. One helmet, multiple setups—tune cooling and cockpit integration without changing models.
Ultimate Performance, Unmatched Safety and Versatility
An aerodynamic front duckbill improves high-speed stability. A Double Screen Anti-Fog (DSAF) insert maintains a positive, fog-resistant visor seal across changing conditions. Rear-facing venturi vents help block dust and debris while still allowing forced air to flow freely. A unique internal air-chamber system distributes airflow evenly around the head, and the BR8 can be used with or without ear cups.
Bell BR8 Carbon SA2025 Helmet Details
Manufacturer: Bell Helmets
Manufacturer part no.: 1238B
Construction: lightweight carbon fiber shell
Interior: dark grey fire-resistant fabric
Homologation: FIA 8859-2015 and Snell SA2025
Finish: gloss carbon fiber
Front duckbill: included
Sizes: 57 cm (7 1/8) to 61 cm+ (7 5/8+)
Shield (clear included): Bell SRV-8
Shield pivot kit: Bell SRV-1
Key Features
Configurable forced-air with included kit: standard, left/right side-air, left/right three-quarter top-air, or top-air
DSAF visor insert for a positive, fog-resistant seal and clear vision
Rear-facing venturi vents help keep dust out while maintaining airflow
Internal air-chamber system distributes cooling evenly around the head
Integrated channels for optional drink tube and radio systems
Advanced multi-density, multi-piece liner for energy absorption and impact performance
Multi-purpose fit system; use with or without included ear cups
Interior ventilation channels maximize airflow and comfort
Synthetic rubber eyeport gasket helps prevent dirt and water ingress
Bell BR8 Carbon Fiber Helmet FAQs
What makes the BR8 Carbon ideal for dirt and off-road?Its rear-facing venturi vents and sealed DSAF visor help manage dust while the configurable forced-air system keeps fresh air flowing in harsh conditions.
Which air configuration should I choose?Select based on cockpit packaging and comfort: side-air for direct flow to the face, three-quarter top-air for visor and crown cooling, or full top-air for evenly distributed cooling.
Is the BR8 Carbon compatible with drink and radio systems?Yes. Built-in channels support hydration tubes and radio cabling for endurance and off-road events.
What certifications does this helmet carry?It meets FIA 8859-2015 and Snell SA2025, making it suitable for a wide range of auto racing series. Always confirm event-specific rules.
Can I use ear cups with this helmet?Yes. The BR8 can be worn with or without ear cups to tailor comfort, noise control, and comms fit.
How does the DSAF system help visibility?The Double Screen Anti-Fog insert maintains a positive seal to reduce fogging and keep the visor clear in variable temperatures and dusty environments.
Get configurable cooling, advanced dust management, and carbon-shell performance in one model. Pre-order the Bell BR8 Carbon and be ready for the green flag.
Stilo
Stilo ST6 Offshore Composite Helmet SA2025
$1,988.00
Stilo ST6 Offshore Composite SA2025 Racing Helmet
Stilo ST6 Offshore Composite SA2025: lighter, cooler, clearer
For over 25 years, Stilo has led helmet innovation, and the new ST6 line moves the benchmark again. With development input from top-level programs, the ST6 brings refined front and top aerodynamics, expanded airflow, and a wider field of view to help you strap in faster and drive with more confidence.
The ST6 Offshore Composite keeps weight down while adding ventilation and clarity where it matters. From the track-tested aero to the dual-lock visor mechanism, every update is about performance you can feel in the car.
The ST6 improves on the beloved ST5 in these key areas:
About 10% lighter than comparable ST5 models for reduced neck fatigue in long sessions
Approximately 26% more airflow to manage heat during hot-weather stints
Roughly 11% wider downward visibility for quicker belts and better cockpit awareness
Refined liner and cheek pads for stability at speed and all-day comfort
Expanded shell size range to optimize weight and fit
Re-engineered visor for durability and easy care with a washable anti-fog treatment
Updated visor hardware for smoother actuation and easy swaps
Stilo ST6 GT Composite Offshore Racing Helmet Features
Puro Tech: Stilo’s composite process minimizes excess coatings to keep mass low without compromising protection.
Added shell size: three shell sizes help deliver the smallest, lightest shell appropriate for your head size.
STILO ST6 GT HELMET PAD CUSTOMIZATION CHART
Increased airflow design: revised front intake and top vents route air through EPS channels to reduce sweat and keep you focused under pressure.
Expanded downward visibility: improved eyeport makes buckle fastening and cockpit checks faster during driver changes.
Interior comfort: reshaped cheek pads enhance aero stability and fit consistency at speed.
Injection-molded visor: clear optics with a washable high-performance anti-fog coating. Dual visor lock meets FIA standards in both closed and vent positions.
Updated visor hardware: smoother operation and easier installation; available in multiple anodized finishes.
Stilo Helmets ST6 GT Composite Offshore Helmet Details
Manufacturer: Stilo Helmets
Manufacturer part number: DA0802RF2X
Homologation: FIA 8858-2015 (HANS posts)
Certification: Snell SA2025
Compatible shields: Stilo ST6 helmet shields
Noise-attenuating earmuffs included (ideal for intercom clarity in loud cabins)
Other Versions of the Stilo ST6 Racing Helmet
Stilo ST6 FN Carbon Fiber Helmet
Stilo ST6 GT SA2025 Carbon Fiber Helmet
Stilo Helmet ST6 FN 8859-ABP Helmet
Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Composite Helmet
Stilo ST6 FN 8859-ABP Helmet
Stilo ST6 GT 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860-ABP Carbon Fiber Helmet
Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet
Stilo ST6 GT Composite Offshore Racing Helmet Sizing Note
Customers who typically wear a size 59 in other brands often prefer a Stilo size 61 (large shell). If you are between sizes or prefer a tighter fit, consider the smaller option.
Measuring Your Head For Your New Stilo ST6 Offshore Composite Helmet
The most effective helmet is one that fits properly. Have an assistant measure the circumference of your head about an inch above the eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest.
What’s Changing in SA2025 Auto Racing Helmets?
SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements.
Key SA2025 Helmet Safety Enhancements:
Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes.
Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports.
In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed.
Stilo ST6 Offshore Composite SA2025 Helmet FAQs:
Does the ST6 Offshore Composite meet Snell SA2025? Yes, this listing reflects the SA2025 certification for U.S. auto racing.
What makes the Offshore version different? It includes noise-attenuating earmuffs designed to reduce cabin noise and improve intercom clarity.
Can I use my ST5 shields on the ST6? No, the ST6 uses its own shield system; choose ST6-specific shields and hardware.
How should I pick my size? Measure head circumference and consult the size chart; if you’re between sizes, many drivers prefer the tighter option for stability at speed.
Is the visor anti-fog? Yes, the ST6 visor includes a washable, high-performance anti-fog treatment.
This helmet ships signature required.
Bell
Bell MAG-10 Carbon Fiber Helmet FIA8859-2024/SA2025
$1,847.00
Bell MAG-10 Carbon Fiber Helmet
This is a pre-order, shipping after Q3 2025.
The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing.
Carbon Performance with Open-Face Visibility
The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions.
Helmet Details
Manufacturer: Bell Helmets
Construction: lightweight carbon fiber shell
Orientation: open-face with long clear visor
Homologation: FIA 8859-2024 and Snell SA2025
Hardware: factory-installed M6 HNR terminals
Comms/Hydration: routing-ready (components optional)
Finish: gloss carbon
Bell MAG-10 Carbon Fiber Helmet Key Features
Open-face carbon design for low weight and wide, unobstructed vision
Multi-density, multi-piece liner for impact energy management
Long clear visor with anti-fog-ready compatibility and broad coverage
Ventilation paths promote airflow for heat management in closed cabins
Routing-ready for radio microphone, speakers, and hydration tube (optional kits)
Factory M6 terminals for head-and-neck restraint systems
Interior uses fire-resistant comfort fabrics for durability and easy care
Bell MAG-10 Carbon Fiber Helmet FAQs
Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules.
Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs.
Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility.
Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup.
What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference.
Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably.
Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence.
This helmet will ship with signature required for delivery.
Stilo
Stilo ST5.1 GT Offshore Composite Helmet SA2020
$1,705.00
Stilo ST5.1 GT Offshore Composite Helmet SA2020
Stilo ST5.1 GT Offshore - The Legend Returns
The Stilo ST5.1 GT Offshore SA2020 helmet carries over everything that made the Stilo ST5 GT one of the most-loved helmets in motorsports. Featuring the same tall eyeport and iconic side ports of the previous generation, the ST5.1 GT from Stilo is worth getting excited about. The Offshore version, with its easy-to-spot bright orange shell, is already wired up for communications through the left-side port.
One of the great things about Stilo GT Series helmets is their adjustability using Stilo helmet padding. Crown padding, cheek padding and different ear muff sizes are all available to customize the fit of your Stilo helmet.
Stilo GT Helmets Feature Unrivaled Features and Flexibility
The Stilo ST5.1 GT Offshore Composite is unsurpassed in built-in flexibility. Each of its two side ports can be fitted with one of three different types of integrated communication electronics, forced air, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT Offshore is sleek and seamless. When not in use, you don't even know the features are there. Stilo offers simply the best modular racing helmet on the market.
This helmet includes communications pre-installed in the left port.
Stilo ST5.1 GT SA2020 Offshore Composite Helmet Orange Details:
Manufacturer: Stilo
Manufacturer part number: DA0702BF2T
Color: Orange
Homologation: Snell SA2020
Shield lock position: center
Replaceable cheek pads: yes
Noise attenuating earmuffs: yes
Sizes: XS to XXXL (54cm to 64cm)
Additional Stilo ST5.1 GT Offshore helmet shields available here
A Note on Stilo Sizing:
We have found that customers who wear a 59cm helmet in other brands are most comfortable in a 60cm Stilo ST5.1 GT Composite, which uses the larger shell size.
This helmet will ship to you with signature required for delivery.
Bell
Bell GT6 RD-4C Titanium S Helmet FIA8859-2024/SA2025
$1,705.00
Bell GT6 RD-4C Titanium S Helmet FIA8859-2024 / SA2025
This is a pre-order, shipping after Q3 2025.
The Bell GT6 RD-4C Titanium S is a premium racing helmet engineered for maximum safety, clarity, and comfort. Built with a lightweight carbon composite shell and dual certification to FIA8859-2024 and Snell SA2025 standards, it’s designed for drivers competing at the highest levels of motorsport.
Elite performance with uncompromising protection
Dual FIA and Snell certification
Approved to both FIA8859-2024 and Snell SA2025, the GT6 RD-4C Titanium S meets the strictest global motorsport standards for professional competition.
Lightweight carbon composite shell
The advanced RD-4C carbon composite construction provides outstanding impact resistance while keeping the helmet light, reducing strain and fatigue during endurance sessions.
Enhanced ventilation
An optimized airflow system channels fresh air through upper and chin intake ports with rear exhausts, ensuring drivers stay cool and focused behind the wheel.
Wide eyeport and SE06 anti-fog visor
With its generous eyeport and standard SE06 double screen anti-fog visor, the GT6 RD-4C Titanium S delivers exceptional visibility and reliable clarity in every condition.
Bell GT6 RD-4C Titanium S Helmet FAQs:
What makes the RD-4C Titanium S different from other GT6 models? The RD-4C Titanium S features a specialized carbon composite shell designed for strength and reduced weight, along with premium fit and finish for pro-level performance.
Is this helmet approved for international racing? Yes, with FIA8859-2024 and Snell SA2025 certifications, it is legal for use in most professional racing series worldwide.
Does the helmet come HANS-ready? Yes, the GT6 RD-4C Titanium S is HANS-ready with pre-installed anchor points for all major head and neck restraint systems.
What visor is included with the helmet? It comes with an SE06 double screen anti-fog visor for maximum clarity, even in challenging conditions.
The Bell GT6 RD-4C Titanium S is the ultimate racing helmet for drivers seeking advanced protection, lightweight design, and professional-grade performance on track.
Bell
Bell GT6 RD 4C/EC Composite Helmet FIA8859-2024/SA2025
$1,705.00
Bell Racing GT6 RD 4C/EC Auto Racing Helmet
This is a pre-order, shipping after Q3 2025.
IMSA Comms, Hydration, and ZeroNoise® in a Race-Ready Shell
Built for serious endurance and GT drivers, the Bell Racing GT6 RD 4C/EC Helmet brings full comms and hydration integration into a track-ready shell without compromise. With its titanium finish, aggressive HP6-derived design, and wide eye port for visibility in tight cockpits, this is the helmet for those who treat every lap like a qualifying session. The GT6 RD 4C/EC is ready for IMSA communication and hydration systems right out of the box—because seconds count, even off the throttle.
4C: Carbon Composite 4 Layer Construction
On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers.
The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). In the case of this Carbon-4C/EC model, the helmet is a Carbon Composite 4-layer shell with EC (electronic comms) kit integration.
Features:
Integrated IMSA Radio & Hydration System: Comes pre-installed with electronics and tubing for plug-and-play connection to your team’s radio and drink system.
4C/EC Carbon-Glass Composite Shell: Lightweight and high-strength, built from premium carbon-glass for optimal energy absorption and all-day wearability in long stints.
ZeroNoise® Advanced Electronics: Equipped with high-power speakers, a noise-canceling microphone, and superior sound insulation for crisp in-car communication even in loud environments.
Wide Eyeport: Offers exceptional lateral and vertical visibility, ideal for closed-cockpit racing where every degree of vision matters.
Track-Proven Ventilation: Strategically placed intake ports can be connected to cooling systems for maximum airflow in hot race conditions.
Standards: Dual certified to FIA8859-2024 and Snell SA2025 for maximum track-day and competition eligibility.
Bell Racing GT6 RD Carbon 4C/EC Helmet FAQs:
What’s the difference between the GT6 and the GT6 RD? The GT6 RD includes factory-installed IMSA radio comms and hydration ports, while the standard GT6 does not.
Is this compatible with ear buds or over-ear speakers? Yes, the 4C version supports both ear cups and ear buds depending on your personal or team setup. Uses IMSA connections.
What is ZeroNoise® and why does it matter? ZeroNoise® is Bell's advanced audio platform, engineered for crystal-clear in-car communication with minimal distortion and maximum driver focus.
Can I use this helmet for endurance racing? Absolutely. With comms, hydration, and a lightweight carbon-glass shell, it's made for long hours in the car at high intensity.
The Bell GT6 RD 4C is the pro’s choice when comfort, comms, and clarity matter most. From sprint races to 24-hour stints, this helmet brings together titanium-level fit, cutting-edge audio, and pure performance.
Bell
Bell M.8 Carbon Fiber Helmet FIA8859-2024/SA2025
$1,705.00
Bell M.8 Carbon Fiber Helmet FIA8859-2024/SA2025
This is a pre-order, shipping after Q3 2025.
The Bell M.8 Carbon Fiber FIA8859-2024/SA2025 helmet is purpose-built for comfort while retaining the classic Bell M design that racers trust. With its oversized eye port and adjustable forehead ventilation, this helmet is ideal for drivers who need to wear sunglasses or prescription glasses while maintaining peak visibility and comfort on track.
Premium Carbon Construction, Modern Safety Standards
Handcrafted from lightweight carbon fiber, the Bell M.8 Carbon meets the newest FIA8859-2024 and Snell SA2025 standards. Its balance of protection, fit, and ventilation makes it a go-to choice for racers in endurance, open-track, and competitive series. Whether you’re logging hours at an HPDE or battling wheel-to-wheel, the M.8 delivers race-day confidence without compromise.
Features
• FIA8859-2024 and Snell SA2025 approved• Lightweight carbon fiber shell (Size M = 2.9 lbs / 1.3 kg)• High-pressure molded shell for maximum strength• Multi-piece, multi-density liner for superior energy absorption• Direct-flow chin vents and forehead air intakes for customizable cooling• Integrated channels for drink tube and radio system use• Black Comfort-Plus FR interior for moisture-wicking comfort• Large eye port optimized for eyeglass wearers• Hollow synthetic rubber gasket keeps out dust, dirt, and water• Includes clear SRV-8 3mm shield with SRV-1 pivot system• M6 threaded inserts for HANS® anchors (sold separately)• Delivered with visor hardware, hex wrench, and helmet bag
Bell M.8 Carbon Fiber Helmet FAQs:
Is the Bell M.8 Carbon certified for racing? Yes, it is homologated to FIA8859-2024 and Snell SA2025 standards, making it legal for most major racing organizations worldwide.
Can I wear glasses with the Bell M.8 Carbon? Absolutely. The oversized eye port is specifically designed for drivers who need sunglasses or prescription eyewear.
What comes in the box? Each helmet includes a clear SRV-8 shield, visor strip, hardware kit with hex wrench, and a Bell helmet bag.
Is it compatible with HANS devices? Yes, the helmet has factory-installed M6 threaded inserts for HANS posts (sold separately).
Step into the cockpit with confidence. The Bell M.8 Carbon FIA8859-2024/SA2025 delivers lightweight strength, incredible comfort, and proven race-ready safety. Order yours today and experience the difference a top-tier Bell helmet makes on track.
Stilo
Stilo Venti WRC Composite Helmet | FIA 8859-2015 & SA2020
$1,634.00
Stilo Venti WRC Composite Helmet
Uncompromising Safety and Performance
The Stilo Venti WRC helmet line, including the Venti WRC Composite, is an update of Stilo's legendary WRC helmets worn by multiple rally racing champions. The Stilo Venti WRC Composite helmet features several improvements, most notably the innovative wireless (WL) communication system. An available wireless key allows the driver and co-driver to continue to communicate even when outside the race car.
The new Stilo Venti WRC Composite auto racing helmet features lightweight construction using the smallest of Stilo's helmet shells for the lightest, most compact helmet available. The Stilo Venti WRC Composite helmet is FIA 8859-2015 and SA2020 certified. With its unique ventilation system, the Stilo Venti WRC Composite helmet offers superior airflow, keeping you cool and focused during long races and under extreme conditions.
The interior padding of the Stilo Venti WRC Composite helmet can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. The Venti WRC Composite is equipped with innovative noise-canceling features and a redesigned mic boom with improved geometry for maximum sound quality and visibility.
The Stilo Venti WRC Composite helmet has an all-new aggressive design featuring an adjustable visor, allowing you to customize your field of view for different driving conditions (e.g., low sun). The Stilo Venti WRC Composite helmet is a professional helmet at the pinnacle of safety, performance, and value in motorsport.
Wireless Communication Innovations Only From Stilo
The microphone boom in the Stilo Venti WRC Composite has been reshaped to reject more cabin noise, improving communication clarity between driver and co-driver. The dynamic noise-canceling microphone is adjustable to allow for optimum spacing from the mouth, further reducing noise and improving clarity. The speakers in the Stilo Venti WRC Composite helmet sit in noise-attenuating ear muffs, greatly reducing external noise and improving comfort. The Stilo Venti WRC helmet's electronics are compatible with traditional wired amplifiers or the new wireless amplifiers.
The Stilo Venti WRC helmet is supplied with factory-fitted HANS post anchors as standard.
Stilo Venti WRC Composite Helmet Details:
Manufacturer: Stilo Helmets
Manufacturer part no.:AA0220BG2T
Homologation: FIA 8859-2015 and Snell SA2020
Shell material: Fiberglass Kevlar MSF(Multi-Sandwich Fiber)
Weight1: Small Shell ~3.3 lbs; Medium Shell ~3.4 lbs; Large Shell ~3.6 lbs.
Adjustable peak visor
HANS post anchors pre-installed
Also available with FIA 8860-2018 certification
How to Measure Your Head for a Properly-Fitting Racing Helmet
The most effective auto racing helmet is one that fits your head properly. Your helmet should fit snug all around your head without putting undue pressure on any point. It should not move around when you shake your head side-to-side or up-and-down. (If it does, imagine what it will do in a crash.)
To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
1 Weight may vary based on installed accessories.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Bell
Bell MAG-10 Rally Carbon Fiber Helmet SA2020
$1,593.00
$2,274.00
Bell MAG-10 Rally Carbon Fiber Auto Racing Helmet
Unleash Your Rally Racing Potential with the Bell MAG-10 Rally Carbon
Drawing inspiration from the flagship Bell HP10 Rally, the MAG-10 Rally Carbon auto racing helmet stands out as a top-tier, ultra-lightweight rally helmet with a contemporary design. Crafted with a feather-light carbon composite shell, it boasts features like a quick-detach Half Chin Bar (HCB), an adjustable carbon sun peak, and a new integrated sunscreen visor. Prioritizing comfort, sound insulation, and a professional fit, this helmet is the preferred choice for rally professionals seeking premium quality.
With insights from the HP10's extensive R&D, the MAG-10 Rally Carbon redefines excellence in the Premium Helmet segment. Integrated ZeroNoise® technology, powerful speakers, and a noise-canceling microphone promise unparalleled communication efficiency along with premium safety and comfort.
Bell MAG-10 Rally Carbon Fiber Helmet Features
Snell SA2020 approved
Exterior: gloss finish carbon fiber
Interior: dark grey high strength Comfort FR® fabric
Ultra-lightweight premium carbon composite shell
Factory installed HANS anchors
Integrated adjustable anti-scratch Dark Smoke sunscreen
ZeroNoise® electronics, high-power speakers and efficient noise-cancelling mic come factory-installed
Removable carbon Half Chin Bar (HCB) detaches quickly and easily detaches for fast airway access without removing the helmet
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Adjustable carbon sun peak
Multi-density, advanced material cheek pads provide optimal comfort
Flexible sound-insulating ear muffs
Ultra-reliable, integrated heavy duty female Nexus connector
Bell MAG-10 Rally Carbon Helmet Options
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order).
Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort.
Sizes (in cm): 54, 55 ,56 ,57, 58 ,59, 60, 61, and 61+
