Tools

Sparco Trackside Tool Roll Track-Tested Performance Sparco Trackside Tool Roll is built for serious racers and track-day drivers who demand performance, safety, and reliability. Whether you're installing a tow strap, harness, or panel kit, this product is engineered to perform under pressure. Compact and Built to Last Designed to fit in tight spaces and survive harsh racing environments, Sparco Trackside Tool Roll features rugged construction and easy install design so you can focus on the drive, not your hardware. Race-Ready Design Lightweight. Effective. Proven. Every element of this product has been tested on real racecars so you can trust it when it counts most. Product Specifications: Manufacturer: Brand dependent Material: Reinforced race-grade material Fitment: Universal or model-specific depending on SKU Application: Race and track-day use Sparco Trackside Tool Roll FAQs Is this item approved for racing?Many items are FIA or SFI approved. Please check the certification listed in the specs. Can I install this at home?Yes, installation is simple with basic tools and clear mounting points. Will this fit my car?Most products are universal or available in fit-specific variants. Level up your safety and preparedness. Add Sparco Trackside Tool Roll to your cart and get race-day ready with gear you can trust.

Alpinestars Tech-M Pit Crew Gloves The Alpinestars Tech-M Pit Crew Gloves are purpose-built for professional motorsport mechanics who need fire-resistant protection, impact absorption, dependable grip, and fast on-and-off performance in the pit lane. Designed and developed through competition in the World Endurance Championship, the Tech-M combines a lightweight bonded aramid-fiber construction with strategically positioned protective foam, abrasion-resistant reinforcement, and textured leather palm inserts. The pre-curved design helps reduce material bunching while operating wheel guns, handling wheels, and completing other demanding pit-stop tasks. An open cuff with a 180-degree elasticated wrist provides a secure fit while allowing mechanics to quickly put on or remove the gloves. Developed for Professional Pit-Crew Use The Tech-M was designed specifically around the needs of motorsport pit crews. Its construction supports the rapid hand movements, tool control, grip, and protection required during high-pressure pit stops. The reduced-material design helps preserve dexterity and tactile feedback while maintaining protection in areas exposed to impact, abrasion, vibration, and heat. Flame-Resistant Aramid Construction The main glove body is made from bonded flame-resistant aramid fiber. This lightweight construction provides a balance of protection, comfort, flexibility, and durability for professional motorsport environments. The flame-resistant materials help provide the coverage required for pit-lane personnel working around fuel, hot components, brakes, wheels, and other competition hazards. Impact-Absorbing Knuckle and Finger Protection Silicon FR-coated protective patches incorporate foam reinforcement across the knuckles and fingers. These strategically positioned areas help absorb impact during wheel changes, equipment handling, and other pit activities. The protective construction is designed to provide additional coverage without creating unnecessary bulk or significantly restricting hand movement. Reinforced Thumb and Index-Finger Area A Silicon FR-reinforced aramid patch is positioned between the thumb and index finger. This high-contact area experiences substantial wear when gripping wheel guns, handles, tools, and other pit equipment. The reinforcement improves abrasion resistance while helping the glove maintain its shape and performance through repeated use. Textured Goat Nappa Leather Palm Inserts Strategically positioned 1 mm Textured Goat Nappa leather inserts provide grip, abrasion resistance, and shock absorption across key palm contact areas. The leather reinforcement helps mechanics maintain control of wheel guns, wheels, tools, and equipment while reducing vibration and impact transmitted through the hands. Pre-Curved Fingers and Palm The fingers and palm are pre-curved to follow the natural gripping position of the hand. This construction reduces excess material and bunching when holding a wheel gun or other pit equipment. The ergonomic shape helps improve dexterity, comfort, and control during fast, repetitive pit-stop procedures. Open Cuff with 180-Degree Elasticated Wrist The wide cuff opening allows mechanics to quickly put on the gloves when preparing for a pit stop. A 180-degree elasticated wrist helps hold the glove securely in place without requiring a bulky closure system. An integrated silicone pull tab assists with removal, helping pit crew members transition quickly between tasks. Durable Embroidered Graphics Fully embroidered Alpinestars graphics provide a professional appearance and improved durability compared with basic surface printing. The branding is designed to withstand repeated professional use and frequent handling. FIA Homologated Pit-Crew Protection The Alpinestars Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. This makes them suitable for many professional motorsport applications requiring approved protective equipment for pit-lane personnel. Teams and crew members should confirm the required certification with their racing organization, series, or sanctioning body before competition. Alpinestars Tech-M Pit Crew Glove Features Designed specifically for professional motorsport pit crews Developed through World Endurance Championship competition Bonded flame-resistant aramid-fiber construction Lightweight reduced-material design Impact-absorbing foam reinforcement at the knuckles and fingers Silicon FR-coated protective patches Reinforced thumb and index-finger contact area Textured 1 mm Goat Nappa leather palm inserts Enhanced grip, abrasion resistance, and shock absorption Pre-curved fingers and palm reduce material bunching Wide open cuff allows quick entry 180-degree elasticated wrist provides a secure fit Silicone pull tab assists with glove removal Durable embroidered Alpinestars graphics FIA 8856-2000 homologated Alpinestars Tech-M Pit Crew Glove Specifications Manufacturer: Alpinestars Model: Tech-M Product Type: Pit Crew Racing Gloves Main Material: Bonded flame-resistant aramid fiber Protection: Foam-reinforced Silicon FR knuckle and finger patches Palm: Textured 1 mm Goat Nappa leather inserts Fit: Pre-curved fingers and palm Wrist: 180-degree elasticated construction Cuff: Wide open aperture with silicone removal tab Homologation: FIA 8856-2000 Ideal for Pit-Lane and Motorsport Workshop Tasks The Alpinestars Tech-M Pit Crew Gloves are designed for demanding motorsport tasks, including: Wheel changes Wheel-gun operation Tire and wheel handling Endurance-racing pit stops Sports-car and touring-car competition Professional race-team service work Trackside mechanical support Motorsport workshop preparation Why Choose Alpinestars Tech-M Pit Crew Gloves? The Alpinestars Tech-M combines fire-resistant protection with the grip, impact absorption, and dexterity required for professional pit-lane work. Its reinforced knuckles, fingers, palm, and thumb area help protect the hands during wheel changes and tool operation. The lightweight pre-curved construction improves control while reducing bunching, and the wide cuff allows quick entry during time-sensitive pit stops. For mechanics who need FIA-homologated protection developed specifically for motorsport service work, the Tech-M is a purpose-built solution. Alpinestars Tech-M Pit Crew Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-M Gloves FIA approved?Yes. The Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. Are these gloves designed for drivers or pit crew members?They are specifically designed for motorsport pit crews and mechanics performing wheel changes, tool operation, and other pit-lane tasks. Do the Tech-M Gloves have impact protection?Yes. Foam-reinforced Silicon FR patches are strategically positioned across the knuckles and fingers to help absorb impact. What material is used on the palm?The palm uses strategically positioned 1 mm Textured Goat Nappa leather inserts for grip, abrasion resistance, and shock absorption. Are the gloves suitable for using a wheel gun?Yes. Their palm reinforcement, pre-curved fit, grip inserts, and impact-absorbing construction are designed for wheel-gun operation and wheel changes. What is the benefit of the pre-curved design?The pre-curved fingers and palm follow the natural gripping position of the hand, reducing material bunching and improving control. How do the gloves stay secure around the wrist?A 180-degree elasticated wrist provides a close, secure fit without requiring a bulky external closure. Are the gloves easy to remove quickly?Yes. The wide cuff opening and integrated silicone tab make them easier to put on and remove during fast pit-lane transitions. Are the Alpinestars graphics printed or embroidered?The gloves feature fully embroidered graphics for improved durability and a professional appearance.

Alpinestars Tech-M V2 Crew Gloves The Alpinestars Tech-M V2 Crew Gloves are professional motorsport pit-crew gloves engineered for precision, protection, and dependable control during fast-paced service work. Designed for mechanics performing high-pressure tire changes and other demanding pit-lane tasks, these gloves combine flame-resistant Aramid materials with impact protection, reinforced grip, and an ergonomic fit. Impact-absorbing protection across the knuckles and fingers helps shield the hands during wheel changes, while reinforced palm and thumb areas provide the durability and control needed when operating high-torque wheel guns and heavy-duty tools. Built for Professional Motorsport Pit Crews The Tech-M V2 is designed specifically for motorsport mechanics and pit-crew members who require reliable hand protection without sacrificing dexterity. Its close, pre-curved construction allows the fingers and palms to move naturally during rapid wheel changes, repairs, adjustments, and repetitive mechanical tasks. The secure fit and tactile palm design help crews maintain control of tools, fasteners, wheels, and other equipment when every second matters. Flame-Resistant Aramid Construction The glove's main construction uses bonded, flame-resistant Aramid fiber to provide a strong balance of protection, comfort, and durability. This material helps protect the hands in professional motorsport environments where exposure to heat and flame is a potential risk. The lightweight construction preserves flexibility and tactile feedback, allowing mechanics to complete precise work without the heavy or restrictive feel associated with bulky protective gloves. Impact-Absorbing Knuckle and Finger Protection Silicone FRR-coated patches are positioned across the knuckles and fingers and backed by impact-absorbing foam. These protective zones help reduce the force of knocks and impacts that may occur while working around wheels, suspension components, tools, and confined pit-lane environments. The strategically placed protection is designed to safeguard vulnerable areas of the hand while preserving the flexibility required for accurate tool operation. Reinforced Thumb and Index Area A Kevlar-reinforced Aramid patch strengthens the high-wear area around the thumb and index finger. This reinforcement provides increased abrasion resistance where the glove regularly contacts wheel guns, sockets, handles, fasteners, and other equipment. The durable construction helps extend the working life of the glove during frequent professional use. Textured Leather Palm Grip Textured leather patches across the palm provide secure grip, shock absorption, and improved control. The palm construction is especially beneficial when operating high-torque wheel guns or handling heavy wheels and tools under demanding pit conditions. The additional grip reduces unwanted hand movement and helps crews maintain control without applying excessive gripping pressure, which can reduce fatigue during repetitive service work. Pre-Curved Ergonomic Fit The fingers and palm are pre-curved to follow the natural shape of the hand while gripping tools and equipment. This ergonomic design reduces material bunching and improves dexterity, allowing the glove to move naturally with the wearer. The close-fitting construction also improves tactile feedback when handling small fasteners, controls, connectors, and other components requiring precise movement. Secure 180-Degree Elasticated Wrist A 180-degree elasticated wrist provides a secure and comfortable fit while allowing the glove to be put on and removed quickly. An integrated silicone pull tab gives the wearer a dependable grip when pulling the glove into position. The streamlined wrist design helps keep the glove properly secured during rapid movements and repetitive pit-lane tasks. Professional Embroidered Finish Fully embroidered graphics provide a durable, professional appearance designed to withstand repeated use. The premium finish complements team uniforms and pit-crew apparel while maintaining the rugged construction required for competitive motorsport environments. FIA-Certified Pit-Crew Protection The Alpinestars Tech-M V2 Crew Gloves are certified to the FIA 8856-2018 homologation standard. This makes them suitable for professional motorsport applications requiring FIA-approved protective gloves. Teams and crew members should confirm the specific equipment requirements of their racing series or sanctioning organization before use. Alpinestars Tech-M V2 Crew Glove Features Designed specifically for professional motorsport pit crews and mechanics Bonded flame-resistant Aramid fiber main construction Lightweight design provides protection without restricting movement Silicone FRR-coated knuckle and finger patches Impact-absorbing foam protects vulnerable areas of the hand Kevlar-reinforced Aramid patch around the thumb and index finger Enhanced abrasion resistance in high-wear areas Textured leather palm patches provide secure tool grip Palm construction helps absorb shock and vibration Designed for high-torque wheel-gun operation Pre-curved fingers and palm reduce material bunching Ergonomic fit improves dexterity and tactile feedback 180-degree elasticated wrist provides a secure fit Silicone pull tab allows quick entry and removal Fully embroidered professional graphics FIA 8856-2018 certified Ideal for Pit-Lane and Mechanical Applications The Tech-M V2 is an excellent choice for tire changers, wheel-gun operators, race mechanics, and other crew members performing high-speed service work. Its combination of impact protection, abrasion resistance, grip, and flame-resistant construction makes it suitable for professional racing, endurance events, testing programs, and other demanding motorsport environments. Why Choose Alpinestars Tech-M V2 Crew Gloves? The Alpinestars Tech-M V2 Crew Gloves provide the protection professional mechanics need while preserving the dexterity required for precise and efficient work. Reinforced impact zones protect the knuckles and fingers, while the leather palm and reinforced thumb area deliver dependable durability and control. For pit crews seeking FIA-certified protection with a secure ergonomic fit, the Tech-M V2 delivers a professional balance of safety, comfort, grip, and responsiveness. Alpinestars Tech-M V2 Crew Glove Size Chart Frequently Asked Questions Who are the Alpinestars Tech-M V2 Crew Gloves designed for?They are designed specifically for professional motorsport pit crews, tire changers, wheel-gun operators, and mechanics working with heavy-duty tools and equipment. Are the Tech-M V2 Crew Gloves fire resistant?Yes. The main construction uses bonded flame-resistant Aramid fiber designed to provide protection in professional motorsport environments. What certification do these gloves have?The Alpinestars Tech-M V2 Crew Gloves are certified to the FIA 8856-2018 homologation standard. How do the gloves protect the knuckles and fingers?Silicone FRR-coated patches and impact-absorbing foam are positioned across the knuckles and fingers to help reduce impact forces. Are the palms reinforced?Yes. Textured leather palm patches improve grip, absorb shock, and provide additional durability during high-torque tool operation. Why is the thumb and index area reinforced?The thumb and index area experiences frequent contact with tools and equipment. A Kevlar-reinforced Aramid patch improves abrasion resistance in this high-wear zone. Are these gloves suitable for operating a wheel gun?Yes. The textured leather palm, impact protection, and ergonomic construction are designed to provide secure control during high-torque wheel-gun use. How does the pre-curved design improve comfort?The pre-curved fingers and palm follow the natural shape of the hand, reducing material bunching and improving dexterity when gripping tools. How does the wrist closure work?A 180-degree elasticated wrist creates a secure fit, while the silicone pull tab helps the wearer put the gloves on quickly.