Stilo
Stilo WL-10 Wireless Intercom System Bundle
$1,550.00
Stilo's Premier Wireless Intercom System
The groundbreaking Stilo WL-10 Wireless Intercom System ushers in a new era in rally racing intercom technology with connections a that are completely wireless. This enables communication between your driver and co-driver without the need for cumbersome connection cables. Based on the world's only active digital noise-cancelling intercom -- the acclaimed Stilo DG10 -- the WL-10 Wireless has undergone significant enhancements, placing it at the pinnacle of motorsport communications and the world's first wireless intercom for rallying.
The Stilo WL-10 Wireless Intercom System has been fine-tuned to be the best noise-cancelling intercom on the market. Powered directly from the car's 12-volt supply, the standout feature of this intercom is its wireless capability, liberating the driving crew from tethered connections.
For enhanced versatility, the intercom features an output for communication with camera systems in Stage mode, as well as an input for radio interfaces (additional equipment required) in Road mode, ensuring seamless integration with team radios. Designed to seamlessly integrate with the latest Stilo helmets, including the WRC Venti and ST5 R WL models, this system represents the forefront of communication technology.
The Stilo WL-10 Wireless Intercom System Bundle includes the DG Wireless intercom (AB0520) and two wireless helmet keys (AG0001), pre-paired and ready for immediate use. An optional wireless headset can be added to enhance comfort during road sections.
The Stilo WL-10 gives both driver and co-driver Digital Active Noise Cancelling, adjustable via an easy-to-use DIG button. With four distinct noise-canceling levels, each member can tailor their experience to suit individual preferences, augmented by independent volume controls.
Switching between Road and Stage modes facilitates seamless integration with Bluetooth-enabled phones for hands-free calls during transit, while ensuring uninterrupted communication during stages.
WL-KEY Wireless Helmet Keys AG0001
Each WL-KEY wireless helmet key and headset has its own battery. With battery life of up to 5 hours on a full charge, the wireless helmet keys and headsets offer ample talk time and convenient USB charging.
The addition of helmet logos on the intercom's user interface simplifies wireless key management and connection status monitoring.
Each wireless helmet key provides a range of up to 10 meters, enabling crew members to converse even when outside the vehicle. These keys have been designed to plug directly into the Stilo Venti WRC, Venti Trophy Plus, and Stilo ST5R WL helmets.
SpeedCom Communications
Speedcom Speed Link Bluetooth Wireless Intercom System
$390.00
Speed Link Bluetooth Wireless Intercom System
Wireless Bluetooth Intercom Made Easy
The Speedcom SCC-SPDLIK Speed Link Wireless Intercom lets you talk freely between driver to coach, side by side, and also with a chase vehicle. The Speed Link Wireless Intercom is designed for two to six users at a time, integrating into each helmet with a durable, easy-to-use side clip that's simple to remove for charging.
The Bluetooth capability of the Speedcom Speed Link Wireless Intercom allows you to pair it to a cell phone to listen to music, take phone calls, and other phone operations. Speed Link can communicate with third-party wireless intercoms so you can use this with other drivers who may not have Speed Link.
The Best Noise-Cancelling Mic In The Business
Speedcom's patented RTM microphone is integrated into the Speed Link system for the ultimate noise-cancelation experience. RTM technology diffuses the ambient sound waves away from the microphone element and cancels out up to 95% of background noise. The RTM microphone delivers performance superior to any other microphone available.
Easily Integrate In-Ear Speakers and Ear Buds
The Speedcom Speed Link Wireless Bluetooth Intercom comes standard with Speedcom SCC-HSK3.5 in-helmet speakers. The system's 3.5mm (1/8-in.) audio plug also makes it easy to swap in the earpiece or ear buds of your choice. See the drop-down menu above for great options to upgrade to Speedcom Custom Ear Mold in-ear speakers (SCC-CEM), Semi-Custom Ear Mold 1 in-ear speakers (SCC-SCEM), or Challenger-style Foam Ear Buds (SCC-FEP).
Speedcom Speed Link Wireless Intercom System Details:
Manufacturer: Speedcom
Manufacturer part number: SCC-SPDLINK
Earpiece jack: standard 3.5mm (1/8-in.) TS female
Included speakers: Speedcom SCC-HSK3.5
Optional in-ear speakers available: Yes
1 Semi-Custom Ear Mold sizing: You'll need a dime, a nickel, and a quarter to determine proper sizing. One at a time, gently fit each coin into your outer ear cavity. The coin that fits most comfortably and securely in your outer ear indicates your Speedcom SCC-SCEM size. A dime corresponds to Small, a nickel corresponds to Medium, and a quarter corresponds to Large.
Trac-Com
Trac-Com V4 Instructor Intercom System
$345.00
Trac-Com V4 Instructor Intercom System
(Pre-Order for June 2025)
What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.
Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.
The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.
Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.
Don’t have time to charge it? Insert a 9V battery, and you’ll add hours of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.
Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.
The Trac-Com Dual Intercom System is the ultimate solution for driver-passenger communication. This state-of-the-art intercom system, created by RaceCom, offers superior sound and reliability in a flexible package. RaceCom has been providing top-quality racing communication solutions since 1995, making them a trusted name in the industry.Say goodbye to years of frustration with other in-helmet intercom systems, and experience the convenience and quality of Trac-Com.
Designed and manufactured in the USA, Trac-Com is the premier choice for racing intercoms and driver/passenger communication. With its adaptable design, it can be used in a variety of applications. The Trac-Com Dual Intercom System includes one R TC INTERCOMV4 base unit, one R TC HS BOOMV2 boom mic/speaker headset, plus instructor headset and IMSA cable.
Say goodbye to years of frustration with inferior in-helmet intercom systems, and experience the convenience, quality, and reliability of Trac-Com. Don't settle for subpar communication on the track or on the road - upgrade to Trac-Com and experience the difference for yourself.
Trac-Com V4 Intructor Intercom System Includes:
(1) Trac-Com Intercom Base Unit V4 (R TC TRACCOM V4)
(1) Trac-Com boom mics (R TC HS BOOMV2)
(1) Trac-Com Helmet kit V2 (R TC HK-IMSA)
(1) Trac-Com Adapter - IMSA Female Adapter (R TC IMSA)
(1) internal battery
(1) tether
SpeedCom Communications
Speedcom SCC-2MPI Two Person Intercom with Headsets
$331.00
Speedcom SCC-2MPI Dual Intercom System
The Simple, Rugged and Reliable Two Person Intercom
The Speedcom SCC-2MPI driver coaching intercom brings features from much more expensive intercom systems and offers simple, rugged and reliable driver-to-passenger communications.
Speedcom SCC-2MPI Two Person Intercom Details
Manufacturer: Speedcom
Manufacturer part no: SCC-2MPI
Power source 1: Four AA batteries
Power source 2: 12VDC vehicle power cable with cigarette lighter adapter
Independent volume control: Yes
Extra loud volume with superb sound quality
Helmet connections: Two IMSA 4C female connectors with 2.2m (7ft. 2 in.) leads
Audio output: RCA plug can send audio in real time to any recording device with an audio input
Integrated roll bar mounting ears for easy installation
Optional headsets can be added in the dropdown above
Two Independent Power Source Options
The Speedcom SCC-2MPI has two independent power sources. For the instructor going from car to car, the 4 internal AA batteries provides multiple weekends of power. For a driver who mounts the SCC-2MPI in their car a 12V DC flying lead (open wires) can power the intercom anytime vehicle power is available.
Securely Mounted Two-Person Intercom System
An incredibly simple and secure roll bar "V" notch is built into the Speedcom SCC-2MPI communicator. Just add two worm-drive/jubilee clamps and you are secured beyond anything we hope you do to your car. Even rally racers.
Two-Person Intercom Helmet Connections
Built in are dual IMSA protocol (4C) female connectors on a lead. These dual IMSA cables are built-in and ready to connect to your Roux integrated electronics or any other helmet with an IMSA helmet kit. If your helmet is not wired, simply add two Speedcom SCC-SEIH Single Ear Intercom Headsets. This device requires headsets sold separately.
Two Independent Volume Controls
Dual independent volume controls are mounted on the front for easy control. The driver knob on the left has the main power control built in, eliminating the need for a secondary master power switch. The result is clean, simple, powerful sound control.
Compact And Rugged
The SCC-2MPI is compact and rugged. The main unit is 9 cm (3.5 in.) wide and the roll bar mount ears are 2.5 cm (1 in.) longer on each side.
Available Cable Lengths
If you've ever had to purchase a race car electronics extension cable, you know how frustrating it is. Why did an engineer think a 3 in. lead is going to work for a racing driver? The 12V DC power lead for the Speedcom SCC-2MPI is 1.3 meters (4 ft 3 in) long. The helmet connectors: 2.2 meters (7 ft 2 in)!
Trac-Com
Trac-Com V4 Dual Headset Intercom System
$328.90
Trac-Com V4 Dual Intercom System
(Pre-Order for June 2025)
What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.
Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.
The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.
Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.
Don’t have time to charge it? Insert a 9V battery, and you’ll add hours of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.
Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.
The Trac-Com Dual Intercom System is the ultimate solution for driver-passenger communication. This state-of-the-art intercom system, created by RaceCom, offers superior sound and reliability in a flexible package. RaceCom has been providing top-quality racing communication solutions since 1995, making them a trusted name in the industry.Say goodbye to years of frustration with other in-helmet intercom systems, and experience the convenience and quality of Trac-Com.
Designed and manufactured in the USA, Trac-Com is the premier choice for racing intercoms and driver/passenger communication. With its adaptable design, it can be used in a variety of applications. The Trac-Com Dual Intercom System includes one R TC INTERCOMV4 base unit and two R TC HS BOOMV2 boom mic/speaker headsets.
Say goodbye to years of frustration with inferior in-helmet intercom systems, and experience the convenience, quality, and reliability of Trac-Com. Don't settle for subpar communication on the track or on the road - upgrade to Trac-Com and experience the difference for yourself.
Trac-Com Dual Intercom System Includes:
(1) Trac-Com Intercom Base Unit V4
(2) Trac-Com boom mics (R TC HS BOOMV2)
(1) internal battery
(1) tether
Trac-Com
Trac-Com Semi Custom Earbuds with 1/8in Plug
$186.00
Trac-Com Semi Custom Earbuds With 1/8-Inch Plug
For the purpose of hygiene and safety, this product is not eligible for return.
Upgrade your racing communication with the Trac-Com Semi Custom Earbuds. These professional style earbuds are designed for perfect communication while on the track. The semi-custom earpieces are specifically made for drivers, ensuring a comfortable and secure fit.
Featuring a standard 1/8-inch TS plug, these earbuds are compatible with most racing communication systems. The high-quality audio ensures clear and crisp communication, allowing you to stay focused on the race.
Don't settle for generic earbuds that may fall out or cause discomfort during a race. Invest in the Trac-Com Semi Custom Earbuds for a personalized and professional racing experience.
Schuberth
Schuberth SP1 Helmet Speaker Kits
from $185.00
Schuberth SP1 Helmet Speaker Kits
Integrated speaker kits from Schuberth elevate your communication experience to the next level by seamlessly incorporating high end audio components into your Schuberth SP1 helmet without compromising comfort or style. Schuberth helmet speaker kits feature speakers built directly into Schuberth Noise Reduction Earcups and a boom-style noise canceling microphone. Dual Electronic Kits also include an earbud connector for use alongside the earcup speakers.
If you purchase a Schuberth SP1 helmet with Speaker Kit, the electronics will be pre-installed, with earcup speakers replacing the standard Noise Reduction Earcups.
Available Schuberth SP1 Integrated Speaker Kits:
SH HK1111: Noise Reduction Earcups with speakers, flex-boom mic, and IMSA connection
SH HK1121: 3.5mm earbud jack, flex-boom mic, and IMSA connection
SH HK1151 DUAL KIT: Noise Reduction Earcups with speakers, integrated 1/8" (3.5mm) earbud jack, flex-boom mic, and IMSA connection
Trac-Com
Trac-Com Intercom V4 Base Unit
$169.00
Trac-Com V4 Intercom Base Unit
Driver/Passenger Communicators That Are Built to Last
(PRE-ORDER for June 2025 Delivery)
The Trac-Com V4 Intercom has been redesigned from the ground up with increased volume, an LCD screen, and a dual battery system. Fully compatible with previous Trac-Com accessories, the latest Trac-Com V4 is now available for pre-order. Shipping in June 2025, the V4 is $169, including a USB-A to USB-C Cable and Case for all your Trac-Com accessories.
What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.
Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.
The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.
Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.
Don’t have time to charge it? Insert a 9V battery, and you’ll add hours of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.
Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.
Trac-Com V4 Base Unit Details:
Dual Independent Volume Controls
LCD Screen
Dual Battery System Built-in 1500 mAh Li-Ion Battery - Rechargeable via USB-C Port
Replaceable 9V Battery
Locking headset connectors
CE and RoHS-compliant
Weight w/ 9V: 3.6oz
Weight w/o 9V: 5.23 oz
Size: L 4.4" W 2.66" H 1.20"
Trac-Com V4 Base Unit Operating Instructions:
Power On/Off:
Press and hold the power button for 3 seconds
Pressing the button temporarily will illuminate the screen but will not power cycle the unit
Adjusting Volume:
Both users have an individual volume control located on each side of the unit.
The volume is adjustable from 0 to 12 using the press + or - buttons.
Listening to loud volumes can permanently affect your hearing. This device is capable of creating sound that is loud enough to cause harm. Please use caution while using the Trac-Com V4
Connecting Headsets:
Insert the male connector found on the Trac-Com accessory into either female port on top of the Trac-Com V4, making sure to line up the notch on the male connector with the indentation on the female port.
To disconnect a headset, press and hold the black button on the male connector while pulling it out of the unit.
Dual Battery System - Overview:
The Trac-Com V4 is equipped with a Dual Battery System
The Internal Battery is a 1500 mAh Li-Ion battery, rechargeable Via USB C cable
This model is also compatible with a standard 9V battery, offering supplemental power.
The Trac-Com V4 can be powered exclusively using the internal battery without a 9V installed, reducing the weight and operating cost.
9V Battery Logic:
The Trac-Com V4 will default to using the 9V battery when installed. The readout will show 4 Bars of the full battery along with a 9V icon.
As the 9V drains, the bars will drop down to zero.
The system switches to the internal battery once the 9V battery is fully depleted. When using the internal battery, the screen will show a 3.7V icon.
Charging:
The 9V battery must be removed before charging
To charge the Trac-Com V4, insert a powered USB-C cable into the unit
Charge time for the internal battery is 2 hours
SpeedCom Communications
Speedcom SCC-2MPI Two Person Intercom
$149.00
Speedcom SCC-2MPI Dual Intercom System
The Simple, Rugged, and Reliable Two Person Intercom
The Speedcom SCC-2MPI driver coaching intercom brings features from much more expensive intercom systems and offers simple, rugged and reliable driver-to-passenger communications.
Speedcom SCC-2MPI Two Person Intercom Details
Manufacturer: Speedcom
Manufacturer part no: SCC-2MPI
Power source 1: Four AA batteries
Power source 2: 12VDC vehicle power cable with cigarette lighter adapter
Independent volume control: Yes
Extra loud volume with superb sound quality
Helmet connections: Two IMSA 4C female connectors with 2.2m (7ft. 2 in.) leads
Audio output: RCA plug can send audio in real time to any recording device with an audio input
Integrated roll bar mounting ears for easy installation
Optional headsets can be added in the dropdown above
Two Independent Power Source Options
The Speedcom SCC-2MPI has two independent power sources. For the instructor going from car to car, the 4 internal AA batteries provides multiple weekends of power. For a driver who mounts the SCC-2MPI in their car a 12V DC flying lead (open wires) can power the intercom anytime vehicle power is available.
Securely Mounted Two-Person Intercom System
An incredibly simple and secure roll bar "V" notch is built into the Speedcom SCC-2MPI communicator. Just add two worm-drive/jubilee clamps and you are secured beyond anything we hope you do to your car. Even rally racers.
Two-Person Intercom Helmet Connections
Built in are dual IMSA protocol (4C) female connectors on a lead. These dual IMSA cables are built-in and ready to connect to your Roux integrated electronics or any other helmet with an IMSA helmet kit. If your helmet is not wired, simply add two Speedcom SCC-SEIH Single Ear Intercom Headsets. This device requires headsets sold separately.
Two Independent Volume Controls
Dual independent volume controls are mounted on the front for easy control. The driver knob on the left has the main power control built in, eliminating the need for a secondary master power switch. The result is clean, simple, powerful sound control.
Compact And Rugged
The SCC-2MPI is compact and rugged. The main unit is 9 cm (3.5 in.) wide and the roll bar mount ears are 2.5 cm (1 in.) longer on each side.
Available Cable Lengths
If you've ever had to purchase a race car electronics extension cable, you know how frustrating it is. Why did an engineer think a 3 in. lead is going to work for a racing driver? The 12V DC power lead for the Speedcom SCC-2MPI is 1.3 meters (4 ft 3 in) long. The helmet connectors: 2.2 meters (7 ft 2 in)!
Trac-Com
Trac-Com Chaser Bluetooth Lead Follow Package
$149.00
Trac-Com Chaser Bluetooth Lead/Follow Package
BLUETOOTH BOXES SOLD AS A PAIR. Select adapter cables from pull-down menu. Please Note: Trac-Com Chaser is not yet compatible with the Garmin Catalyst.
2020 brought unique challenges and changes to the sport we all love. With limited options for in car instruction, the Lead/Follow model has taken its place for high performance driving events. The Trac-Com Chaser is an affordable bluetooth communication link for those looking to receive driving feedback without having someone in the passenger seat. The adjustable volume keys on the unit allow for quick, on the fly audio adjustment without having to reach for a phone! Reliable Bluetooth 5.1 ensures low latency and terrific audio quality. A Lithium Ion Polymer battery is used to avoid any potentially dangerous overheating issues.
The Basics:
Compatible with all Trac-Com adapter cables and accessories
Rechargeable battery
Digital Lithium Ion Polymer battery delivers 10 hours of use
Compact size, lightweight at 0.9 oz
Built with traditional Trac-Com durability
Bluetooth 5.1 technology
How Does It Work?
Each driver starts by connecting one chaser unit to their personal cell phone – it is important that the Chasers are paired one at a time to avoid accidentally pairing the wrong device. To initiate the pairing mode, hold down the power button for a few seconds. The device will appear on the BT pairing screen on the phone, laptop, or other device. Each driver then connects either a Trac-Com Student headset or an integrated helmet kit to their corresponding Chaser unit (optional adapter cable required for integrated kits). With both devices properly setup, the Student and Instructor will use the paired phones to communicate with a phone call or any other audio sharing application on their phone. There are many different uses for this product and your phone or computer is the limit. Units are not able to be paired together.
What's Included?
The Lead / Follow Package includes two units (one for the student and one for the instructor), a USB charging cable
Stilo
Stilo ST5 or ST6 FN Communications Kits
from $145.00
Stilo ST5 / ST6 FN Communications Kits – Plug In. Tune Out Distractions. Drive Like a Pro.
Stay locked-in, even when everything else is shaking apart.These non-integrated Stilo communication kits are built for one thing: clear, reliable radio communication when you're slicing through apexes at triple-digit speeds. Whether you're battling for position in an endurance race or chasing every tenth in a time attack, these comms kits deliver the pro-grade clarity you need to stay connected and in control.
Compatible with Stilo ST5 FN, ST6 FN, and GT helmets, these plug-and-play kits make race-day communication simple, seamless, and effective—without sacrificing comfort or focus.
Choose Your Configuration – We’ve Got You Covered
AE0321 – Stilo Earmuff Speakers with 3.5mm Jack
Designed for use with Raceceiver units
Drop-in 3.5mm connection – fast and foolproof
Crisp, clear audio directly to your ear muffs
Perfect for pit boss instructions or spotter calls like “INSIDE!”
AE0339 – Non-Integrated IMSA Kit w/ Gentex Boom Mic + 4-Conductor Coil
IMSA 4-pin plug for professional team communication
Gentex noise-canceling boom mic cuts through engine noise
3.5mm jack for your choice of racing earbuds
Race-tested reliability by drivers who demand crystal-clear audio
AE0323 – NASCAR 3-Conductor Kit w/ Gentex Boom Mic + Earcup Speakers
NASCAR 3-pin plug system
Boom mic and speaker combo built for full-send performance
3.5mm jack for flexible earbud compatibility
Ideal for oval track warriors and road course racers alike
AE0322 – IMSA Kit w/ Stilo Noise-Canceling Button Mic + 4-Conductor Coil
Compact noise-canceling button mic with clear voice transmission
IMSA 4-pin system for professional team radio setups
3.5mm jack compatible with your preferred earbuds
Great choice for closed cockpit drivers seeking minimal interior clutter
AE0309 – Clean & Simple IMSA Button Mic Kit
Designed specifically for Stilo ST5 FN and ST6 FN helmets
Minimalist setup with pro-level communication quality
Noise-canceling button mic keeps the focus where it belongs—on driving
Why You'll Love Stilo FN Communication Kits
Crystal-Clear Communication: Whether you're drafting at Daytona or chasing sector times at Sebring, you'll hear and be heard clearly.
No Helmet Modifications Needed: Drop-in, non-integrated design—no cutting, drilling, or complicated installs required.
Customizable Audio Setup: Choose earmuffs, earbuds, boom or button mic based on your racing needs and environment.
Technical Specifications
Helmet Compatibility: Stilo ST5 FN, ST6 FN, and GT models
Connection Types: IMSA 4-pin, NASCAR 3-pin, 3.5mm jack for earbuds
Microphone Options: Gentex Boom Mic or Stilo Button Mic (both noise-canceling)
Speaker Options: Earmuff speakers or in-earbud compatibility
Part Numbers: AE0321, AE0339, AE0323, AE0322, AE0309
Frequently Asked Questions (FAQs)
Q: Will this kit fit my Stilo ST5 GT helmet?
A: Yes! While these kits are designed for the FN models, they work perfectly with Stilo GT helmets as well.
Q: Do I need to modify my helmet to install this communication kit?
A: No modifications needed. These non-integrated kits drop right in—no cutting, drilling, or special tools required.
Q: What’s the difference between the boom mic and button mic options?
A: Boom mics sit directly in front of your mouth for maximum voice clarity—great for open cockpits or louder race environments. Button mics are smaller, mounted inside the liner, and offer a clean, low-profile setup for closed cockpits.
Q: Can I use my own racing earbuds?
A: Absolutely. All kits include a 3.5mm jack so you can use your preferred in-ear monitors.
Q: IMSA vs NASCAR plug—how do I know which one I need?
A: It depends on your radio system. IMSA uses a 4-pin connector, NASCAR uses a 3-pin connector. Check your team's setup to confirm compatibility.
Take Control of the Conversation
Whether you're a weekend warrior or a pro driver chasing championships, clear communication = more confidence = faster laps. Stilo communication kits are engineered for racers who expect the best from their gear.
Add to Cart now and make sure your next radio call isn’t “Say again?” but “10-4, let’s go get that podium.”
Trac-Com
Trac-Com Helmet Speaker Kit V2
$120.00
Trac-Com Helmet Speaker Kit V2
This versatile helmet kit is a must-have for any driver looking to enhance their racing experience. Designed by RaceCom, the V2 Helmet Kit is a universal solution that can be easily installed on most motorsport helmets, regardless of size or shape. It includes the V2 Helmet Kit and an IMSA male cable end, making it a complete package for instructors.
So, what sets the V2 kit apart? It incorporates the latest technology and lessons learned from the V2 Student headset to provide the loudest, most complete, and highest quality sound. The new R7 digital microphone and powerfully tuned speakers are built into a compact package that can be quickly and comfortably installed on any helmet.
Trac-Com Helmet Speaker Kit V2 Features
Two powerfully tuned speakers
New R7 digital microphone
Male IMSA plug on headset
Strong, sturdy RaceCom cables that have been pull-tested by a certified lab
Meticulous build process proven to outlast and outperform all others
Includes:
Helmet Speaker Kit V2
Stilo
Stilo ST5 GT Communications Kits
from $118.00
Stilo Helmet GT Communications Kits
Integrate Race Communications Seamlessly With Your Stilo GT-Series Helmet
Upgrade your Stilo GT helmet with professional-grade communication kits designed to keep you connected at race pace. Stilo GT-Series helmets feature molded-in ports that allow easy installation of a communications jack, a noise-canceling microphone, and either integrated ear cups with speakers or a 3.5mm jack for your own in-ear monitors. Some kits even offer both options for maximum flexibility!
While installation isn’t especially difficult, we recommend professional installation for optimal performance. Have questions? Call us at (844) 438-7244 — we're happy to help you set up your Stilo communications kit.
Stilo AE0210 Communications Kit with Ear Cups
Manufacturer: Stilo
Part Number: AE0210
Microphone: Gentex button-style microphone mounted inside the chin bar padding
Speakers: Noise-reducing padded Stilo Ear Cups with integrated speakers
Input Jack: Female four-channel Stilo connector
The Stilo AE0210 is the most popular in-helmet communications kit for Stilo GT helmets with factory side ports. The button microphone fits neatly into a recess inside the chin bar padding, while the integrated ear cup speakers attach securely with Velcro to the helmet’s side padding for reliable, crystal-clear communication.
Stilo AE0214 Communications Kit for Ear Buds
Manufacturer: Stilo
Part Number: AE0214
Audio Output Jack: 3.5mm female jack for connecting custom earbuds (earbuds not included)
Microphone: Gentex button-style microphone installed inside the chin bar padding
Input Jack: Female four-channel Stilo connector
The Stilo AE0214 is ideal for drivers who prefer custom earbuds over ear cups. If you prioritize lightweight comfort and premium audio quality, this kit lets you integrate your Stilo GT-Series helmet with your personal in-ear monitors while maintaining pro-grade voice clarity with the Gentex button microphone.
Stilo AE0110 Ear Cup and Boom Mic Kit
Designed for the GT-Series helmet, the Stilo AE0110 integrates a noise-canceling boom microphone and earmuff speakers directly into the helmet’s sideports. Perfect for endurance racing and multi-driver setups, this kit provides outstanding audio quality with fast, seamless connections between driver changes.
Stilo AE0320 Ear Cup and Ear Bud Combo Kit
Manufacturer: Stilo
Part Number: AE0320
Input Jack: Female four-channel Stilo connector
Speakers: Noise-reducing padded Stilo Ear Cups with integrated speakers
Audio Output Jack: 3.5mm female jack for ear buds (earbuds not included)
Microphone: Gentex flex boom microphone
The Stilo AE0320 is the ultimate communications upgrade for drivers facing extreme cockpit noise, like those in formula cars or ultra-high compression V8 race cars. This dual electronics kit uses Stilo’s proven ear cup speakers and also allows simultaneous audio through your custom earbuds for unbeatable sound clarity under the most intense conditions.
Your Stilo GT helmet is ready for easy installation with pre-designed recesses in the chin bar and cheek pads. The Gentex flex boom microphone ensures optimal placement for minimal background noise and maximum voice clarity—protecting your crew chief's ears and your race-day focus.
Trac-Com
Trac-Com IMSA Coiled Cable Helmet Kit
$95.00
Trac-Com IMSA Coiled Cable Helmet Kit
The Trac-Com IMSA Coiled Cable Helmet Kit is a must-have for professional customers. This kit includes a custom designed digital noise canceling mic, specialized earbud jack, and modular coiled IMSA connector. Our meticulous build process has been proven to outlast and outperform all others in the business. With the Trac-Com IMSA Coiled Cable Helmet Kit, you can easily add communications to any helmet. Please note that ear buds are not included with this kit.
Trac-Com IMSA Coiled Cable Helmet Kit SKU: R HK IMSA SCC
SpeedCom Communications
Speedcom SCC-SEIH Single Ear Headset
from $91.00
Speedcom Single Ear IMSA Intercom Headset
The Speedcom SCC-SEIH single-ear intercom headset connects to all Speedcom intercom units and features a built-in IMSA (4C) male connector for simple, reliable driver-to-passenger communications.
Speedcom Single Ear Headset Details
Manufacturer: Speedcom
Manufacturer part number: SCC-SEIH
Flexboom length: 18 cm (~7 in.)
Wiring harness length: 1.1 meter (3 ft 9 in)
Wiring harness protocol: IMSA 4C male
Compact Earpiece Speaker
The actual speaker portion of the Speedcom SCC-SEIH Single Ear Intercom Headset is very compact, measuring approximately 3.5 cm in diameter and 2 cm thick including the pillow pad. This pillow pad compresses easily and has the right amount of give for comfort.
Earpiece Flex Boom Microphone
Attached to the speaker is a noise cancelling microphone on a flexible boom. The flex portion of the boom is 14 cm (5.5 in.) long and the mini-microphone adds 4 cm (1.5 in.), making it 18 cm (7 in.) long in total so it can easily reach your mouth. The compact overall size of the Speedcom SCC-SEIH has worked in every helmet we tested it in.
Earpiece Wiring Harness
Why do students pull the earpiece out by the wires? That's a question for the ages. Speedcom changes how headsets are built by making the harness with a built-in molded plug. Other brands use the compression of the two speaker piece halves to hold the wire, but Speedcom uses a wire that has the security block built into the harness during manufacturing.
Is this a more expensive way to build a headset? Yes. Is it the better way to build a headset? Also yes. Using the most popular racing protocol, the IMSA lead is 3 ft. 9 in. long. That's a perfect length whether your intercom is dash mounted, wedged between the seats of a D.E. car, or held in the instructor's hand.
