600LT

CMS Performance RF1 DOT4 Racing Brake Fluid Real Life 622º Boiling Point Without the Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids. Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids. On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance. No Hype. All Performance. No Kidding. So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid. CMS Performance RF1 Racing Brake Fluid Details: Manufacturer: CMS Performance Manufacturer part no.: CMSRF1 Typical dry boiling point: 622º F / 328º C Typical wet boiling point: 399º F / 204º C Exceeds DOT 3 & DOT 4 standards Bottle size: 500 ml (16.9 fl. oz.) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Brake Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

Fits These Vehicles: Make Model Build (Year) Front Rear McLaren 720S [ceramic brakes] 2018 + X   McLaren 600LT [ceramic brakes] 2019 + X RSC 1: The Pagid RSC1 is a good street/track compromise for enthusiasts with Carbon-Ceramic Brakes. Used for sprint racing and track days compound with all known types of ceramic brake discs. An ideal combination of cold friction, fade resistance and low thermal oxidation of the disc surface.

Girodisc A2-159 Rear Racing Brake Rotors Fits the following cars fitted with factory CCB rotors: McLaren 650S (Rear) McLaren 570S (Rear) McLaren 720S (Rear) McLaren 600LT (Rear) Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline. The Girodisc system for the McLaren 600LT, 720S, 650S or 570S is a direct replacement for the OEM carbon ceramic rotors. No modifications are necessary, the Girodisc rotors will bolt directly to your McLaren and work with the original calipers without issue. We recommend Pagid 4346racing brake pads for this Girodisc system, in either RS29 (endurance) or RS14 (sprint) compound. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed. When used with Pagid pads and high-temp racing brake fluid, you have an excellent, race-proven solution to the fragile, ultra-expensive carbon-ceramic rotors on your McLaren.

Girodisc McLaren 390mm Front Rotors These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track. A1-206  Vehicle Fitment McLaren 600LT  McLaren 720S Lightweight, High-Performance Rotor Assemblies The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206). A1-206  Features Direct OEM replacement, no modifications required 2-piece floating rotor assemblies reduce unsprung weight High-carbon iron rings for consistent braking performance 48 curved vanes for efficient cooling Reusable 6061-T6 aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA Girodisc McLaren 390mm Front Rotors FAQs: Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings. Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling. Related Products A2-206 Girodisc McLaren 390mm Rear Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings D1-206 Girodisc McLaren 390mm Front Replacement Rings

Fits These Vehicles: Make Model Build (Year) Front Rear McLaren 720S [ceramic brakes] 2018 +  X McLaren 600LT [ceramic brakes] 2019 +   RSC 1: The Pagid RSC1 is a good street/track compromise for enthusiasts with Carbon-Ceramic Brakes. Used for sprint racing and track days compound with all known types of ceramic brake discs. An ideal combination of cold friction, fade resistance and low thermal oxidation of the disc surface.

Girodisc Racing Brake Pads McLaren 600LT & 720S (Rear) These all-new Girodisc brake pads are designed specifically for use with the Girodisc rotor conversion kit for the McLaren 600LT and 720S. These specially-designed rear pads are available in a single compound that has been optimized to provide unsurpassed performance with either the Endurance and Sprint compounds available on the Girodisc front pads.

Girodisc Brake Pads McLaren 600LT / 720S (Front) These all-new Girodisc brake pads are designed specifically for use with the Girodisc A1-206 rotor conversion kit for the McLaren 600LT and 720S. These specially-designed pads are available in two excellent breakthrough compounds: Endurance and Sprint. The Endurance compound is the longest-lasting pad on the market right now, currently dominating the paddock at Le Mans and most other endurance events. The Sprint compound sacrifices approximately 30% in longevity for an increase of about 30% in bite. Which compound is right for you depends on what you’re trying to get out of your 600LT or 720S. It's worth mentioning that the Sprint compound still lasts longer than most endurance compounds offered by other racing brake manufacturers.

Cobalt Racing Brake Pads McLaren 600LT and 720S (Front) with Girodisc rotor conversion These Cobalt brake pads are designed specifically for use with the Girodisc A1-206 rotor conversion kit for the McLaren 600LT and 720S. These specially-designed pads are available in two excellent breakthrough compounds: XR1 (Sprint) and XR2 (Endurance). XR1 Compound This Sprint compound sacrifices approximately 30% in longevity for an increase of about 30% in bite. XR2 Compound The XR2  Endurance compound is the longest-lasting pad on the market right now, currently dominating the paddock at Le Mans and most other endurance events. Which compound is right for you depends on what you’re trying to get out of your 600LT or 720S.  It's worth mentioning that the Sprint compound still lasts longer than most endurance compounds offered by other racing brake manufacturers.

Cobalt Racing Brake Pads McLaren 600LT & 720S with Girodisc Rotors (Rear) These Cobalt brake pads are designed specifically for use with the Girodisc rotor conversion kit for the McLaren 600LT and 720S. These specially-designed rear pads are available in two compounds that have been optimized to provide unsurpassed performance with either matching Cobalt McLaren front pads. XR1 Compound This Sprint compound sacrifices approximately 30% in longevity for an increase of about 30% in bite. XR2 Compound The XR2 Endurance compound is the longest-lasting pad on the market right now, currently dominating the paddock at Le Mans and most other endurance events. Which compound is right for you depends on what you’re trying to get out of your 600LT or 720S. It's worth mentioning that the Sprint compound still lasts longer than most endurance compounds offered by other racing brake manufacturers.

Girodisc McLaren 390mm Front Replacement Rings These Girodisc D1-206 front replacement rings are sold as rings only and include replacement hardware. They are engineered to be used with existing Girodisc aluminum hats and are not compatible with OEM or other aftermarket hats. Vehicle Fitment McLaren models with 390 mm front brakes Refresh Your Two-Piece Front Rotors Machined from proprietary high-carbon iron to Girodisc specifications, these rings deliver stable performance and heat capacity for demanding use. The 48 curved vane design promotes airflow through the hub for effective cooling during repeated braking events. Features Replacement rings only; reuse Girodisc hats Includes replacement hardware High-carbon iron rings for consistent braking 48 curved vanes for cooling under heavy use Cost-effective service solution for track and street Girodisc McLaren 390mm Front Replacement Rings FAQs: Do these include hats? No, these are rings only and require existing Girodisc hats. Can I use OEM hats? No, only Girodisc hats are compatible. Are these sold in pairs? Yes, rings are sold in pairs with hardware. What is the part number? D1-206 for McLaren 390 mm front applications. Related Products A1-206 Girodisc McLaren 390mm Front Rotors A2-206 Girodisc McLaren 390mm Rear Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings

Girodisc D2-159 Replacement Rotor Rings McLaren 570, 600LT, 650S, & 720S (Rear) REPLACEMENT ROTOR RINGS AND INSTALLATION HARDWARE ONLY. DOES NOT INCLUDE ALUMINUM ROTOR HATS. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc replacement rotor system is a direct rotor disc replacement for the Girodisc 2-piece hat and rotor and no modifications are necessary. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece Girodisc design allows for rotor-ring only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

Girodisc McLaren 390mm Rear Replacement Rings These Girodisc D2-206 rear replacement rings are sold as rings only and include replacement hardware. They are engineered to be used with existing Girodisc aluminum hats and are not compatible with OEM or other aftermarket hats. D2-206  Vehicle Fitment McLaren 600LT  McLaren 720S Serviceable Two-Piece Design Rings are machined from proprietary high-carbon iron for durability and heat resistance. The 48 curved vane design acts as a centrifugal pump to draw air through the hub, improving cooling under sustained braking. Reusing your Girodisc hats helps control long-term running costs. Features Replacement rings only; reuse Girodisc hats Includes replacement hardware High-carbon iron rings for reliable performance 48 curved vanes for effective cooling Direct fit for Girodisc A2-206 rear rotor kits Girodisc McLaren 390mm Rear Replacement Rings FAQs: Do these include hats? No, these are rings only and require Girodisc hats. Are they sold as a pair? Yes, rings are sold in pairs with hardware. Can I use factory hats? No, these rings are only for Girodisc hats. What kit do these pair with? They are the replacement rings for A2-206 rear rotor kits. Related Products A1-206 Girodisc McLaren 390mm Front Rotors A2-206 Girodisc McLaren 390mm Rear Rotors D1-206 Girodisc McLaren 390mm Front Replacement Rings

Girodisc McLaren 390mm Rear Rotors These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track. A1-206  Vehicle Fitment McLaren 600LT  McLaren 720S Lightweight, High-Performance Rotor Assemblies The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206). A1-206  Features Direct OEM replacement, no modifications required 2-piece floating rotor assemblies reduce unsprung weight High-carbon iron rings for consistent braking performance 48 curved vanes for efficient cooling Reusable 6061-T6 aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA Girodisc McLaren 390mm Front Rotors FAQs: Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings. Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling. Related Products A1-206 Girodisc McLaren 390mm Front Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings D1-206 Girodisc McLaren 390mm Front Replacement Rings