C6 Z06/Grand Sport

CMS Performance RF1 DOT4 Racing Brake Fluid Real Life 622º Boiling Point Without the Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids. Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids. On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance. No Hype. All Performance. No Kidding. So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid. CMS Performance RF1 Racing Brake Fluid Details: Manufacturer: CMS Performance Manufacturer part no.: CMSRF1 Typical dry boiling point: 622º F / 328º C Typical wet boiling point: 399º F / 204º C Exceeds DOT 3 & DOT 4 standards Bottle size: 500 ml (16.9 fl. oz.) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle

Girodisc Brake Pad Spreader The Right Tool for the Job This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Built Like a Tank. Works Like a Charm. Insert the spreading plates one way for wider six-piston calipers, or turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. It will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

HALO P1 High Performance Brake Fluid The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles. Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.

Goodridge G-Stop High Performance Stainless Brake Lines Fitment: Corvette C6 Z06, ZR1, & Grand Sport (2006-13) Goodridge G-Stop high performance brake lines for the C6 Corvette Z06, ZR1, or Grand Sport consist of the finest quality PTFE inner hose covered by a braided stainless steel outer casing. This gives you a much firmer, more responsive brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, making them ideal for the very high brake pressures seen during HPDE track days. G-Stop High Performance Brake lines are abrasion and corrosion resistant so they last a long time under harsh conditions. Goodridge G-Stop high performance brake lines are direct bolt-on replacements for all of the rubber brake lines in your Corvette's brake system1. Four brake lines are included in each kit, with hose ends and brake line brackets that match the car’s original equipment. Conforming to Federal Motor Vehicle Safety Standard Number 106, Goodridge G-Stop high performance brake lines are U.S. DOT certified and T.U.V. approved. All Goodridge G-Stop brake lines go through a nine-point Quality Assurance testing process that includes measuring tensile strength and the ability to sustain line pressures to 3,000 psi. Goodridge G-Stop Stainless Brake Line Details: Precise fit for your C6 Corvette Z06, ZR1, or Grand Sport Greater braking efficiency Resistance to abrasion and corrosion Firmer pedal under heavy braking Added reliability, safety and brilliant looks Technically superior and race proven DOT, TUV, ADR, DEKRA, ARAICCC, ISO9001 Accredited. FMVSS 106 compliant DOT approved 1 Note: Brake components should be installed by a competent mechanic in a professional manner. Incorrect installation of brake components can be a major safety hazard.

Pagid Racing Brake Pads Shape No. 8240USA Front Fits the Following Vehicles: Make Model Years Front Chevrolet Corvette C6 Grand Sport (multi-pad system) 2010–2013     X Chevrolet Corvette C6 Z06 (multi-pad system) 2006–2013     X This set of brake pads consists of 12 pieces total for the Corvette C6 multi-pad front caliper system. Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid R01 Compound: The R01 features a specially formulated compound designed for both street and light racing applications. This unique blend ensures consistent performance, allowing for quick heat recovery and reliable stopping power, whether you're navigating city streets or tackling a race track.

Corvette C6 Z06, Grand Sport Front Rotors The Girodisc 2-piece front rotor upgrade is the ultimate braking enhancement for the Corvette C6 Z06 and Grand Sport. Designed as a direct replacement for the heavy factory rotors, these precision-engineered discs bolt directly to your stock calipers—no modifications required. With each rotor weighing just 19.2 lbs compared to the 25.6 lb OEM units, this upgrade slashes rotational and unsprung mass for improved turn-in, sharper handling, and more responsive acceleration. Each Girodisc rotor features a 6061-T6 aircraft-grade aluminum hat mated to proprietary cast iron rings, both designed and machined in the USA. The internal curved vane design acts as a centrifugal air pump, continuously drawing cool air through the disc to dissipate heat. The result is exceptional fade resistance, consistent pedal feel, and the durability to withstand repeated high-speed stops without warping. Lightweight Performance, Track-Proven Reliability Vehicle Fitment Chevrolet Corvette C6 Z06 Chevrolet Corvette C6 Grand Sport Girodisc A1-117 Features Direct OEM replacement: Works seamlessly with factory calipers and ABS, no modifications required. Significant weight savings: 19.2 lbs vs. 25.6 lbs OEM per rotor—less unsprung mass for better control and agility. Advanced cooling design: Curved directional vanes pull air through the disc, reducing fade and heat soak. Floating mount system: Precision steel drive pins allow axial and radial float, eliminating noise and maintaining pad alignment. Serviceable two-piece design: Replace only the iron rings for cost-effective maintenance over time. Made in the USA: Designed, cast, and machined in-house to the highest motorsport standards. Girodisc A1-117 FAQs Are these rotors a direct fit for OEM calipers? Yes. Girodisc rotors bolt directly to the stock C6 Z06 or Grand Sport calipers with no modifications needed. What’s the weight difference compared to factory rotors? Each Girodisc rotor saves approximately 6.4 lbs, improving acceleration and suspension response. Do I need new brake pads? No, these rotors are compatible with factory or aftermarket pads designed for the C6 Z06 and Grand Sport. Are these rotors track-ready? Absolutely. Girodisc rotors are engineered for demanding street and track use, offering superior heat management and fade resistance. How are they sold? Sold and priced per pair. Transform your Corvette’s braking performance with Girodisc 2-piece front rotors—lightweight, durable, and built to deliver the precision stopping power your Z06 or Grand Sport deserves.

Pagid Racing Brake Pad Shape No. 8240USA Rear Fits the Following Vehicles: Make Model Build (Year) Rear Chevrolet Corvette C6 Grand Sport (multi-pad system) 2010–2013    X Chevrolet Corvette C6 Z06 (multi-pad system) 2006–2013    X This Pagid racing brake pad set consists of eight individual rear brake pads (four for each side). Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid R01 Compound: The R01 features a specially formulated compound designed for both street and light racing applications. This unique blend ensures consistent performance, allowing for quick heat recovery and reliable stopping power, whether you're navigating city streets or tackling a race track.

D1-117 Girodisc Front Replacement Rotor Rings REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an Authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece Girodisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Girodisc Corvette C8, Camaro 398mm Front Replacement Rings Refresh the braking performance of your Corvette C8 or Camaro with Girodisc 398mm Front Replacement Rings. Designed as direct replacements for existing Girodisc two-piece rotors, these rings let you reuse your aluminum hats, saving cost and maintaining the precision balance and performance your car was built for. Each pair comes complete with new hardware for a perfect fit. Engineered for Track-Level Performance Each Girodisc replacement ring is machined in the USA from high-quality, proprietary cast iron and features a race-proven curved vane design. This configuration draws cooling air through the rotor, enhancing thermal control and ensuring consistent braking during high-speed track sessions or spirited driving. The result is fade-free performance and long-term durability. Features Sold as a pair and includes new replacement hardware Direct replacement for Girodisc two-piece front rotors Reuse your existing Girodisc aluminum hats to save cost and time Made from proprietary U.S.-poured cast iron for durability and heat management Curved vane internal design promotes maximum airflow and cooling Fully machined, balanced, and finished in the USA Vehicle Fitment 2020–2025 Chevrolet Corvette C8 (all trims equipped with Girodisc 398mm front rotors) 2016–2024 Chevrolet Camaro SS, ZL1, and 1LE models with Girodisc 398mm front rotors Corvette C8, Camaro 398mm Front Replacement Rings FAQs: Do these fit OEM two-piece rotors? No. These rings are specifically designed for Girodisc two-piece rotor systems and will not fit OEM or other aftermarket hats. What’s included in the kit? Two 398mm replacement rings, new hardware, and installation instructions. Your Girodisc aluminum hats are reused. When should I replace my rings? Replace when minimum thickness is reached or if cracking, warping, or heat checking occurs. Do I need to replace both sides at the same time? Yes. Always replace both front rings together for balanced braking and even wear. Can I install these myself? Skilled DIYers can install them, but Girodisc recommends professional installation to ensure proper torque specs and safety. Are these balanced? Yes. Each Girodisc ring is precision-balanced for smooth, vibration-free braking performance. Please note: Girodisc replacement rings are designed exclusively for use with Girodisc hats unless otherwise specified.

D2-319 Girodisc Corvette C8 Z06, E-Ray Rear Replacement Rings These Girodisc D2-319 rear replacement rings are sold in pairs and include replacement hardware. They are designed to be used with existing Girodisc aluminum hats on Corvette C8 Z06 and E-Ray rear applications and are not compatible with OEM or other aftermarket hats. Vehicle Fitment Chevrolet Corvette C8 Z06 (Rear) Chevrolet Corvette C8 E-Ray (Rear) Refresh Your Two-Piece Rear Rotors High-carbon iron rings with 48 curved vanes deliver strong cooling and stable performance under heavy braking. Reusing your Girodisc hats keeps long-term service costs low. Features Replacement rings only; reuse Girodisc aluminum hats Sold in pairs with replacement hardware High-carbon iron rings for reliable braking 48 curved vanes for efficient cooling Direct fit for Girodisc A2-319 rear rotor kits D2-319 Girodisc Corvette C8 Z06, E-Ray Rear Replacement Rings FAQs: Do these include hats? No, these are rings only and require existing Girodisc hats. Are they sold individually? No, they are sold as a pair. Are these compatible with OEM hats? No, only Girodisc hats are compatible. Are these suited for track use? Yes, they are built for demanding heat cycles. Related Products A1-320 Girodisc Corvette C8 Z06, E-Ray Front Iron Rotor Conversion A2-319 Girodisc Corvette C8 Z06, E-Ray Rear Rotors D1-320 Girodisc Corvette C8 398mm Front Replacement Rings D2-319 Girodisc Corvette C8 Z06, E-Ray Rear Replacement Rings

Girodisc D1-319 Front Replacement Rotor Rings Corvette C8 Z06 • For Girodisc 2-Piece Front Rotors (Non-Z07) Refresh your braking performance with Girodisc D1-319 Front Replacement Rotor Rings for the 2023+ Chevrolet Corvette C8 Z06. Designed as direct replacements for your existing Girodisc two-piece front rotors, these rings restore consistent, track-ready stopping power. Key Features Direct-fit (Non-Z07): Replaces worn rotor rings on Girodisc two-piece front rotors for the C8 Z06. Track-ready construction: Proprietary high-carbon cast iron for excellent thermal capacity and stability under extreme heat. Floating mount design: Stainless hardware and alloy drive pins allow axial float to reduce stress, noise, and warping. Efficient cooling: 72 curved vanes act as a centrifugal pump to move air and manage heat more effectively than solid rotors. Hardware included: Ships with new bolts and mounting hardware for a straightforward install. Perfect For Track days and HPDE High-performance street driving C8 Z06 owners running Girodisc two-piece front rotors Replacing worn rings without buying new rotor hats What's Included (2) Front Girodisc D1-319 rotor rings All required mounting hardware Fitment 2023+ Chevrolet Corvette C8 Z06 with Girodisc two-piece front rotors (non-Z07 brake package) Not compatible with OEM one-piece or carbon-ceramic setups. Why Girodisc Girodisc manufactures premium motorsport and high-performance braking components in the USA. Whether you’re chasing lap times or driving spiritedly on the street, these rings deliver consistent, confidence-inspiring braking. SKU: D1-319