Stilo

Stilo ST5 .004" Thick Tear-Off Pack Protect your Stilo ST5 helmet shield from rocks, dirt, and debris with these 4 mil (.004" or 0.1 mm) thick visor tear-offs. Measuring 4/1000ths of an inch in thickness (the most popular for open cockpit and harsh-environment racers), these tear offs are intended for road racing or dirt track use. One package of tear-offs contains in four stacks of three tear-offs. Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4-Mil Tear-Off Pack Details Manufacturer: Stilo Manufacturer part numbers: 3459C Thickness each: 4 mil (0.004") Tint: Clear Fits all Stilo ST5 Helmets: Yes Fits Stilo ST4F and Stilo ST4W Helmets: No Four stacks of three tear-offs (total of 12). Note: these are the thicker of tear-offs (4 mil) for your Stilo ST5 series helmets. They are used primarily in open-cockpit road racing cars, dirt track racing, and other harsh racing environments.

Stilo ST5 Thin 2-mil Tear-Off 30-Pack Protect your Stilo ST5 helmet shield from rocks, dirt, and debris with these .002" (0.05 mm) thick tear-offs. Measuring 2/1000th of an inch thick (the most popular thickness for dirt track racers), these tear-offs are excellent for road racing or dirt track use. One package of 2-mil tear-offs contains three stacks of ten tear-offs (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 helmet shield by drastically reducing pitting and scratches. Stilo ST5 2-mil Tear-Off Pack Details Manufacturer: Stilo Manufacturer part numbers:10259C Thickness each: 2 mil (0.05 mm) Gradient/tint: clear Fits all Stilo ST5 helmets Does not fit Stilo ST4F and Stilo ST4W helmets Three Stacks of ten tear-offs glued together Note: These are the thinner of the Stilo tear-offs (2 mil) for your Stilo ST5 series helmet. They are used primarily in dirt track racing where you tend to go through more tear-offs during each race.

Stilo Acrysol Shield Cleaner for Stilo ST5 Visors Only DO NOT USE ON ANY OTHER VISORS INCLUDING STILO ST6 Ground Shipping Only for this Item.Stilo ST5 helmet shields have a special inner anti-fog coating that is harmed by any type of ammonia, acidic, or even vinager based cleaners. The only safe way to clean the inside of a Stilo shield is with this very fast drying, ultra-purified solvent based cleaner.   Stilo Shield Cleaner Details: Manufacturer: Stilo Manufacturer part number: YA0640 Size: 20 oz Aerosol: Yes Approved by Stilo: Yes Acrysol is commonly used in premium auto body shops. Used primarily for body panel degreasing prior to top color coat application, and is the official Stilo Shield cleaner. How do you clean the inside of a Stilo Shield?  We prefer to remove the shield from the helmet and spray a wet mist amount on the inside first. Then quickly and lightly, use a single wiping action to to go from one side to the other going the long way. We then turn the visor over and repeat using the single swipe method. If debris/mud/etc remain, repeat until perfect. This is the Official certified cleaning agent that will keep your vision perfect in front and the competition behind and not damage your special anti-fog coating.

Stilo ST5/ST6 Helmet Hydration Coupling Engineered to seamlessly integrate into your Stilo ST5/ST6 helmet hydration system. Female connector for Stilo YA0600 helmet hydration kit.