all

Sparco Gulf Full Zip Sweatshirt *EUROPEAN FIT - This item is made in Italy with a European cut. It runs smaller when compared to standard US sizing. We recommend selecting one size up when ordering. When the wind picks up or light rain threatens your trackside prep, the Sparco Gulf Full Zip has you covered with racing-inspired functionality and sleek Gulf styling. Waterproof Feel Meets Lightweight Italian Engineering Features: • Wind/Water-Resistant Fabric: Lightweight technical weave blocks breezes and repels light rain• European Racing Fit: Made in Italy with a slimmer cut—size up for layering• Full-Length Zipper: Easy on/off in the pits or paddock without fumbling• Sizes XS–3XL: Broad range to suit every driver’s build• Two Colorways: Iconic Gulf Navy or subtle Gray to match your livery• Italian Craftsmanship: Precision stitching and durable finishes for lasting performance Sparco Gulf Full Zip FAQs: Does the Full Zip fit true to US sizing? It’s based on a European cut and runs a bit snug—ordering one size up is recommended for layering over racewear. Is this jacket fully waterproof? It’s water-resistant—perfect for light showers and wind protection but not designed for heavy downpours. How do I clean the Sparco Gulf Full Zip? Machine wash cold on a gentle cycle, hang to dry, and avoid fabric softeners to maintain water repellency. Can I wear this off the track? Absolutely—its clean lines and Gulf accents make it a weekend wardrobe standout as well as trackside essential. For a perfect blend of motorsport DNA and everyday utility, the Sparco Gulf Full Zip delivers protection and style wherever you go. Competition Motorsport sales@competitionmotorsport.com | 844-438-7244

OMP Velocita 380 Steering Wheel – 380mm Flat, Leather or Suede The OMP Velocita 380 Steering Wheel is a driver’s tool—built for precise inputs, real feedback, and long-stint comfort. Its larger 380 mm diameter provides extra leverage (perfect for endurance cars and non-power-steering builds), while the flat profile improves clearance in tight cockpits and makes ingress/egress easier. Choose smooth black leather for durable street/track duty or suede for maximum race-glove grip. Three black anodized aluminum spokes deliver strength without excess weight, so you feel the car—not the flex. Key Features & Benefits Flat (0 mm) dish: Better ergonomics and dash visibility in tight cockpits. Large 380 mm diameter: Finer control and reduced effort—ideal for endurance and manual-rack setups. Grip options: Smooth black leather (durable, glove-friendly) or suede (maximum dry-glove traction). 3 black anodized spokes: Lightweight, rigid construction for precise feedback. Horn button included: Convenient for mixed street/track builds. Technical Specifications Diameter: 380 mm Dish: Flat (0 mm) Cover Material: Smooth black leather or suede Stitching: Black Spokes: Three, black anodized aluminum Horn Button: Included Bolt Pattern: Standard 6-bolt Momo/OMP OMP Part No.: OD0-1987 (Leather) / OD0-2030 (Suede) FAQs Will it fit my car?Yes—use a vehicle-specific 6-bolt hub adapter (OMP, Momo, Sparco, NRG, etc.), sold separately. 380 vs. 350 mm?The 380 mm gives more leverage and smoother inputs for long stints or manual racks; 350 mm rotates faster and suits tighter spaces. Is the wheel FIA certified?Steering wheels aren’t individually FIA-homologated. OMP components are widely used in sanctioned motorsport; pair with FIA-rated seats/harnesses as required. Can I install it myself?If you’re comfortable with basic tools, yes. Use the correct hub and disconnect the battery before removing any factory airbag wheel. Note: Vehicle-specific hub adapter sold separately.

Xstack Perimeter Seal Laminated Tear-Offs The Perimeter Seal system is the latest technology from Racing Optics that allows for a tighter seal to your helmet visor, keeping dirt, dust and water from getting behind the tear-off stack. An XStack is a stack of 10 laminated tear-offs that are 2 mil (0.002" or 0.05 mm) thick each. The laminated technology creates a distortion-free optical lens. Each package contains three stacks of ten clear tear-offs for a total of 30 tear-offs. Xstack Perimeter Seal Tear-Off Pack Details Manufacturer: Racing Optics Manufacturer part no.: 10208CP Tint: clear Thickness (ea.): 2 mil (0.002"/0.05 mm) Post spacing: 12 1/8" (308 mm) Total tear-offs: 30 Fits the Following Helmets: Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield, Star GP, Star Infusion G-Force: Revo, Rift, Rookie Roux: R1-F Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ

Sparco Competition R 353 Steering Wheel Flat Bottom. Maximum Precision. The Sparco Competition R 353 Steering Wheel is designed for drivers who need precision, comfort, and performance in a compact package. With a 330 mm diameter and 36 mm dish, the R 353 delivers responsive steering and improved cockpit ergonomics. The flat-bottom design creates additional legroom and allows for quick entry and exit, making it perfect for modern race cars and tight cockpits. Wrapped in premium suede, the R 353 offers a high-grip surface for maximum control—especially when wearing racing gloves. Built with Sparco’s motorsport expertise, this steering wheel is equally at home on the track, in rally competition, or in a high-performance street car build. Features & Benefits 330 mm Diameter: Compact size for responsive steering inputs. 36 mm Dish: Balanced depth for comfort and control. Flat-Bottom Design: Extra clearance for legs and improved cockpit ergonomics. Premium Suede Grip: Provides secure, glove-friendly traction in racing conditions. Motorsport Proven: Designed by Sparco for competition use and performance driving. Technical Specifications Diameter: 330 mm Dish (Depth): 36 mm Cover Material: Suede Design: Flat bottom Why Choose the Sparco R 353? With its compact size, suede grip, and flat-bottom design, the Sparco Competition R 353 Steering Wheel is a perfect choice for drivers who demand both comfort and performance. From tight cockpit builds to competitive racing, the R 353 delivers precision control and ergonomic advantages trusted by Sparco racers worldwide.

Sparco R 330 Steering Wheel 330mm Suede or Leather The Sparco R 330 Steering Wheel is designed to deliver maximum driving precision, comfort, and control. Featuring a yellow leather centering stripe for quick alignment reference and a varied anatomic grip, the R330 provides an ergonomic advantage that reduces fatigue and enhances driver feedback. With a 330mm diameter and 39mm dish, it’s the perfect blend of responsiveness and leverage for performance driving. Available in premium suede or leather with durable black cross stitching, the R330 is built to withstand the demands of motorsport and spirited street driving. Key Features Diameter: 330mm – compact size for responsive control Dish: 39mm depth for improved ergonomics and comfort Grip: Varied anatomic grip design for tactile feedback and reduced fatigue Cover Material: Choice of suede for maximum race grip or leather for all-around use Yellow leather centering stripe for quick wheel alignment Durable black cross stitching for long-lasting performance and style Why Choose the Sparco R 330? The Sparco R330 is a favorite among performance enthusiasts and racers alike, offering a balance of comfort, precision, and durability. Its ergonomic grip provides superior feel, while the suede or leather covering ensures dependable control in every driving scenario. Whether on the street, at a track day, or in competition, the Sparco R 330 Steering Wheel delivers professional-level performance and Italian craftsmanship. Sparco steering wheels may require a vehicle-specific hub adapter, sold separately.

OMP Velocità Steering Wheel Maximum control. Minimal compromise. One seriously sexy steering wheel. The OMP Velocita isn’t here to look pretty on a shelf. It’s built for drivers who live for precision, grip, and confidence at speed. This flat, 3-spoke wheel delivers clean, direct feedback whether you're clipping apexes at a track day or throwing down in competition. Wrapped in smooth black leather with subtle black stitching or bold yellow stitching, it’s got the perfect balance of style, comfort and control. The black anodized aluminum spokes are strong and lightweight, and the oval handgrip (30x25 mm) feels like it was custom-molded to your driving style. Oh, and yes—it includes a horn button for those “hey, buddy!” moments on and off the track. Why You Want the Velocita Flat design for tight cockpits and fast hand movement 350mm diameter—just right for precise steering without overcorrection Oval grip (30x25 mm) keeps your hands relaxed and planted Black anodized aluminum spokes are lightweight and race-ready Smooth black leather grip with black or yellow stitching for a clean, professional look Includes horn button—because you're still allowed to have some personality Tech Specs Diameter: 350 mm Profile: Flat (0 mm dish) Grip: Oval, 30x25 mm Material: Black leather Stitching: Black Spokes: three, black anodized aluminum Horn button: Included OMP Velocita Steering Wheel FAQs: Will it fit my car?If you're running a standard 6-bolt hub (OMP, Sparco, Momo, etc.), you're golden. Just make sure you have the right hub adapter for your vehicle. Is it FIA or SFI approved?Steering wheels aren’t individually certified, but OMP is a trusted FIA-approved brand with decades of race-winning pedigree. How does it compare to a deep dish wheel?The Velocita's flat design is perfect for compact cockpits or formula-style setups. Need more dish or reach? Check out OMP's deeper options. Can I install it myself?If you're handy and have the right hub, it's an easy install. If your current wheel has an airbag, consider leaving it to a pro. How long does it last?With basic care (no sunscreen hands, no baking in the sun), the Velocita will last you many seasons of hard driving. Take the Wheel. Literally. Ready to transform your driving experience? The OMP Velocita gives you the tactile feedback and confidence every racer craves. Add it to your cart now and put real control at your fingertips.

Stilo ST6 CMR Carbon Lite Youth Karting Helmet The Stilo ST6 CMR Carbon Lite Karting Helmet delivers professional-level protection, lightweight construction, and exceptional comfort for young competitive kart racers. Developed with engineering inspired by Stilo's Formula 1 helmet technology, the ST6 CMR Carbon Lite combines an advanced composite shell with an outer carbon fiber layer to create a high-performance youth racing helmet designed for demanding karting competition. Weighing under 1,000 grams (approximately 2.2 lbs), the ST6 CMR Carbon Lite helps reduce helmet mass and neck fatigue during practice sessions, qualifying, and competitive races. Its youth-focused construction provides the protection, visibility, and comfort needed by developing drivers without the unnecessary weight of a full-size adult racing helmet. The redesigned ST6 platform features a wider eyeport for improved peripheral vision, optimized ventilation with large front and top air intakes, and re-engineered interior padding for a secure and comfortable fit. A refined visor mechanism provides smooth operation and dependable performance throughout the race weekend. Designed specifically for junior karting, the Stilo ST6 CMR Carbon Lite meets the CMR2016 karting helmet standard, making it an excellent choice for young racers competing in events that require CMR-approved protective equipment. Stilo ST6 CMR Carbon Lite Helmet Features CMR2016 Certification: Designed to meet the youth karting helmet safety requirements used in competitive kart racing. Ultra-Lightweight Construction: Manufacturer-stated weight under 1,000 grams helps minimize neck fatigue. Carbon Composite Shell: Advanced composite construction reinforced with an outer carbon fiber layer combines strength, durability, and reduced weight. Wider Eyeport: Improved peripheral visibility helps drivers monitor surrounding competitors and upcoming corners. Optimized Ventilation: Large front and top ventilation openings channel airflow through the helmet to improve comfort. Youth-Specific Fit: Re-engineered padding and shell geometry provide stability and comfort for younger drivers. Refined Visor Mechanism: Smooth, reliable visor operation with a clear face shield. Double D-Ring Retention: Secure chin strap fastening designed for motorsport use. Premium Racing Design: Exposed carbon construction with available factory graphic options for a professional appearance. Ultra-Lightweight Carbon Construction for Junior Racers Helmet weight is particularly important in youth karting, where younger drivers experience repeated braking, cornering, and acceleration forces. The Stilo ST6 CMR Carbon Lite uses an optimized composite structure with a carbon outer layer to deliver a lightweight helmet without sacrificing the protective engineering required for competitive karting. The reduced helmet mass helps limit the load placed on a young driver's neck throughout long races and demanding track sessions. This makes the ST6 CMR Carbon Lite a strong option for drivers progressing through regional, national, and international karting competition. Wider Eyeport for Improved Track Visibility The ST6 helmet platform incorporates a redesigned eyeport to improve the driver's field of vision. Increased peripheral visibility helps young racers identify nearby competitors, anticipate passing opportunities, and maintain awareness when racing wheel-to-wheel. Whether navigating a crowded starting grid, defending a racing line, or approaching a technical corner, the wider eyeport supports improved visual awareness without compromising the secure fit of the helmet. Advanced Ventilation and Race-Day Comfort The Stilo ST6 CMR Carbon Lite features an optimized ventilation system incorporating large front and top air intakes. These openings direct airflow into the helmet, helping manage heat and improve comfort during demanding race conditions. The redesigned interior padding complements the ventilation system by providing a stable, supportive fit. Combined with the lightweight shell, these improvements help younger drivers stay comfortable and focused throughout extended karting sessions. CMR2016 Certified Youth Karting Protection The ST6 CMR Carbon Lite is engineered specifically for the requirements of youth kart racing. Its CMR2016 certification addresses the protective needs of younger competitors while emphasizing reduced helmet weight. CMR2016-certified helmets are commonly required for younger drivers in sanctioned karting events. Always confirm helmet eligibility with the applicable racing organization and event regulations before competition. Stilo ST6 CMR Carbon Lite Helmet Specifications Manufacturer: Stilo Model: ST6 CMR Carbon Lite Helmet Type: Youth Full-Face Kart Racing Helmet Certification: CMR2016 Shell Construction: Advanced Composite with Carbon Fiber Outer Layer Manufacturer-Stated Weight: Under 1,000 Grams (Approximately 2.2 lbs) Ventilation: Front and Top Air Intakes Eyeport: Wide-Visibility ST6 Design Chin Strap: Double D-Ring Face Shield: Clear Shield Included Interior: Youth-Specific Racing Helmet Padding Available Sizes: 53, 54, 55, 56, 57, and 59 cm Available Finishes: Carbon and Select Factory Graphic Designs Primary Application: Competitive Youth Kart Racing Stilo ST6 CMR Carbon Lite Helmet Sizing Chart A properly fitted karting helmet should sit level on the head, feel snug without creating painful pressure points, and remain secure when the driver moves their head. A helmet that shifts excessively or feels loose should not be used for competition. Stilo ST6 CMR Carbon Lite Frequently Asked Questions Is the Stilo ST6 CMR Carbon Lite approved for youth karting? Yes. The ST6 CMR Carbon Lite is a CMR2016-certified karting helmet designed for younger racing drivers. Confirm the certification requirements of your specific series or event before competing. How much does the Stilo ST6 CMR Carbon Lite weigh? Stilo describes the ST6 CMR Carbon Lite as weighing under 1,000 grams, or approximately 2.2 lbs. Weight may vary depending on helmet size and configuration. What makes the ST6 CMR Carbon Lite different from an adult racing helmet? The ST6 CMR Carbon Lite is engineered specifically for junior kart racers, with lightweight construction, youth-oriented sizing, and CMR2016 certification. These features address the needs of younger drivers who require a properly sized and lightweight helmet. Does the Stilo ST6 CMR Carbon Lite have a carbon fiber shell? Yes. The helmet features advanced composite construction with an outer carbon fiber layer, helping deliver durability and reduced weight. Does the ST6 CMR Carbon Lite provide good ventilation? Yes. Large front and top ventilation intakes help channel airflow through the helmet, improving comfort during warm weather and extended karting sessions. What sizes are available in the Stilo ST6 CMR Carbon Lite? The manufacturer lists 53, 54, 55, 56, 57, and 59 cm sizes. Measure the driver's head carefully and consult official Stilo sizing information to determine the correct fit. Does the Stilo ST6 CMR Carbon Lite include a face shield? Yes. The helmet includes a clear face shield with a refined visor mechanism designed for dependable operation during karting competition. Is the Stilo ST6 CMR Carbon Lite suitable for drivers under 15? Yes. The helmet is specifically designed for youth karting and is appropriate for younger drivers competing in categories requiring CMR2016 certification, subject to event regulations and proper fit. Are factory graphic versions available? Yes. Stilo offers exposed carbon and select factory graphic versions, including red, blue, and green designs. Available colors may vary by helmet size. Can the ST6 CMR Carbon Lite be used for professional karting competition? Yes. The helmet is developed for competitive youth kart racing, including demanding regional and national events where its certification is accepted. How should I clean my Stilo karting helmet? Use helmet-safe cleaning products and a soft microfiber cloth. Avoid harsh solvents, abrasive cleaners, and excessive moisture. Follow Stilo's cleaning and maintenance recommendations to protect the shell, shield, and interior. When should I replace my karting helmet? Replace a helmet after a significant impact or if damage is suspected. Regularly inspect the shell, visor, chin strap, and interior padding. Follow the manufacturer's replacement guidance and any certification age limits established by your racing organization. Why choose the Stilo ST6 CMR Carbon Lite for junior kart racing? The ST6 CMR Carbon Lite combines lightweight carbon composite construction, CMR2016 certification, improved visibility, enhanced ventilation, and a youth-specific fit. These features make it a premium choice for serious young kart racers seeking comfort and protection on the track.  

Bell MAG Rally Open-Face Racing Helmet – FIA 8859-2024 The Bell MAG Rally Helmet delivers professional rally communication technology, modern motorsport protection, and exceptional value in a lightweight, open-face racing helmet designed for drivers and co-drivers. Part of the Bell Racing Sport Series, the MAG Rally combines a durable fiberglass composite shell with a factory-integrated ZeroNoise communication system, including high-power speakers, a noise-canceling microphone, and a flexible microphone boom for clear driver-to-co-driver communication. Homologated to FIA 8859-2024, the Bell MAG Rally features an adjustable racing peak with an integrated anti-glare sunscreen, factory-installed HANS anchors, and a heavy-duty Female Nexus communication connector. Finished in distinctive Titanium Silver Metallic, the MAG Rally offers contemporary styling and essential rally racing features without the premium price of high-end carbon fiber helmets. Whether you're entering your first stage rally, upgrading your co-driver equipment, or building a competition-ready rally car, the Bell MAG Rally provides the protection, communication capability, and comfort needed for demanding motorsport environments. Bell MAG Rally FIA 8859-2024 Helmet Key Features FIA 8859-2024 Homologated: Meets the FIA 8859-2024 motorsport helmet safety standard for applicable racing events. Fiberglass Composite Shell: Durable construction engineered to provide impact protection and driver comfort. Open-Face Rally Design: Provides excellent visibility and convenient access to communication equipment. Integrated ZeroNoise Electronics: Factory-installed communication system designed for rally competition. High-Power Speakers: Integrated speakers help provide clear communication in noisy race cars. Noise-Canceling Microphone: Helps reduce unwanted cockpit noise during communication. Flexible Microphone Boom: Adjustable positioning for effective voice pickup and driver comfort. Extendable Curly Cable: Flexible communications cable accommodates movement inside the vehicle. Female Nexus Connector: Heavy-duty molded connection compatible with selected rally intercom amplifiers. Adjustable Racing Peak: Allows drivers to customize sun protection. Integrated Anti-Glare Sunscreen: Helps improve visibility during bright daytime competition. Factory-Installed HANS Anchors: Ready for use with compatible frontal head restraint systems. Black Fire-Resistant Interior: Designed for comfort and motorsport use. Titanium Silver Metallic Finish: Distinctive metallic appearance with Bell Racing branding. Entry-Level Rally Value: Integrated communication and FIA homologation at an accessible price point. Integrated ZeroNoise Rally Communication System Clear communication between the driver and co-driver is essential during rally competition. The Bell MAG Rally comes equipped with an integrated ZeroNoise communication system designed to deliver dependable communication in demanding motorsport environments. The helmet includes high-power speakers, an efficient noise-canceling microphone, and a high-quality flexible boom that allows the microphone to be positioned near the driver's mouth. These integrated components eliminate the need to purchase and install a separate basic helmet communication kit. For rally drivers and co-drivers, the ZeroNoise system helps support communication of pace notes, course instructions, timing information, and important driving updates. The helmet's communication equipment is installed as original equipment, providing a clean and purpose-built configuration. High-Power Speakers for Clear Rally Communication The MAG Rally features integrated high-power speakers developed to support communication in the noisy environment of a competition rally car. Rally vehicles can produce significant noise from engines, transmissions, tires, suspension movement, and road surfaces. The helmet's speakers are designed to help drivers and co-drivers hear instructions clearly when connected to a compatible intercom amplifier. Proper helmet fit and correct amplifier configuration are important for achieving optimal communication performance. Noise-Canceling Microphone With Flexible Boom The Bell MAG Rally includes a noise-canceling microphone mounted on a flexible, high-quality boom. The microphone helps reduce unwanted background noise while capturing the driver's or co-driver's voice. Its flexible mounting system allows the microphone position to be adjusted for different drivers, seating arrangements, and individual preferences. For effective communication, position the microphone according to the ZeroNoise manufacturer's recommendations. Proper positioning is particularly important during high-speed rally stages when engine and road noise can make verbal instructions difficult to hear. Heavy-Duty Female Nexus Communication Connector The Bell MAG Rally uses an extendable curly communication cable terminating in a heavy-duty, in-molded Female Nexus connector. This connection is designed for reliable use with compatible rally communication amplifiers. The coiled cable allows additional movement inside the cockpit while helping prevent unnecessary cable slack. Bell also specifies compatibility with selected amplifiers from other manufacturers, making the MAG Rally a versatile option for racers with existing communication equipment. Important: Always verify Nexus connector pin configuration and amplifier compatibility before connecting to a non-ZeroNoise system. The external intercom amplifier and associated vehicle wiring are sold separately unless included in a specific product package. FIA 8859-2024 Certified Rally Protection The Bell MAG Rally is homologated to FIA 8859-2024, an FIA safety standard developed for automotive motorsport helmets. The homologation establishes requirements for protective helmet construction and impact performance. This certification makes the MAG Rally suitable for racing applications that accept FIA 8859-2024 open-face helmets. The helmet also includes factory-installed HANS anchors for compatible frontal head restraint systems. Certification Note: Some professional motorsport categories require FIA 8860 homologation or a different helmet configuration. Always confirm your sanctioning body's current requirements. Fiberglass Composite Shell Construction The Bell MAG Rally features a fiberglass composite outer shell developed to provide dependable impact protection while maintaining an accessible price point. Fiberglass composite construction delivers a practical combination of durability, structural performance, and manufacturing consistency. The shell works together with the helmet's protective liner to meet FIA 8859-2024 homologation requirements. For rally competitors who do not require an ultra-lightweight carbon fiber model, the MAG Rally offers an attractive combination of safety, functionality, and value. Adjustable Racing Peak With Anti-Glare Sunscreen The Bell MAG Rally incorporates an adjustable racing peak equipped with an anti-glare sunscreen. This design helps drivers manage bright sunlight and changing visibility conditions during rally competition. Rally stages frequently transition between wooded roads, open countryside, and areas with direct sunlight. The adjustable peak allows drivers to customize sun protection according to changing conditions and individual preferences. The integrated sunscreen helps reduce glare while preserving the advantages of the helmet's open-face construction. Open-Face Design for Rally Drivers and Co-Drivers The Bell MAG Rally uses a traditional open-face racing helmet design with contemporary styling. The open-face configuration provides excellent visibility and convenient access to the driver's face and communication equipment. For co-drivers, this design is especially useful when reading pace notes, monitoring course information, and communicating continuously with the driver. Drivers also benefit from a wide viewing area while navigating complex rally stages. The MAG Rally provides the essential features of a dedicated rally helmet without the additional complexity and cost of premium carbon fiber models. Factory-Installed HANS and FHR Anchors The Bell MAG Rally comes equipped with factory-installed HANS anchors as original equipment. These anchors provide attachment points for compatible approved frontal head restraint systems. Factory-installed anchors simplify race preparation and eliminate the need to purchase separate helmet anchor posts for a standard compatible configuration. Always verify compatibility with the specific restraint system being used and follow all manufacturer instructions. Comfortable Black Fire-Resistant Interior The MAG Rally features a black fire-resistant interior designed for motorsport use. The interior provides comfortable contact around the driver's head while helping maintain a secure helmet fit during competition. Bell offers the MAG Rally in Small, Medium, Large, and Extra Large sizes. Alternative factory interior colors are not listed for this model. For the best fit, measure the circumference of your head around the widest point, approximately one inch above your eyebrows. A properly fitted helmet should remain snug and secure without excessive movement or uncomfortable pressure points. Bell MAG Rally Technical Specifications Manufacturer: Bell Racing Helmets Model: MAG Rally Series: Bell Sport Series Helmet Type: Open-Face Rally Racing Helmet Certification: FIA 8859-2024 Shell Material: Fiberglass Composite Exterior Color: Titanium Silver Metallic Interior Color: Black Interior Material: Fire-Resistant Fabric Communication System: Integrated ZeroNoise Electronics Speakers: Integrated High-Power Speakers Microphone: Noise-Canceling Microphone Microphone Mount: Adjustable Flexible Boom Communication Cable: Extendable Curly Cable Communication Connector: Heavy-Duty In-Molded Female Nexus External Intercom Amplifier: Sold Separately Racing Peak: Adjustable Anti-Glare Sunscreen: Included HANS/FHR Anchors: Factory Installed Available Sizes: S, M, L, XL Alternative Interior Colors: Not Available Primary Applications: Stage Rally, Rally Racing, Driver and Co-Driver Competition Example Manufacturer SKU: 1435A51 - Silver, Small 57-58 Quantity: Sold Individually Bell MAG Rally Sport Helmet FIA 8859-2024 Size Chart Compatible Bell MAG Rally Accessories The Bell MAG Rally supports selected racing accessories designed to improve communication compatibility, comfort, and protection during rally competition. Compatible ZeroNoise Rally Intercom Amplifiers Compatible Female Nexus Communication Connections Rally Communication Extension Cables Compatible FHR and HANS Restraint Systems Protective Racing Helmet Storage Bags Always confirm accessory and intercom compatibility with the Bell MAG Rally and its installed communication equipment before ordering. Bell MAG Rally Helmet Care and Maintenance Proper cleaning and regular inspection help maintain the safety, comfort, and performance of the Bell MAG Rally. Exterior Care: Clean the fiberglass composite shell using a soft microfiber cloth and appropriate products suitable for automotive finishes. Never use abrasive or solvent-based cleaners. Interior Care: Gently clean the interior comfort padding using mild soap and water applied with a clean cloth. Avoid saturating the protective liner or electronic components. Communication System: Inspect the microphone boom, speakers, curly cable, and Nexus connector regularly for signs of wear or damage. Peak and Sunscreen: Check the adjustable peak mechanism and sunscreen for secure operation and damage before competition. Hardware Inspection: Inspect the chin strap, retention hardware, and factory-installed FHR anchors before every racing event. Drying: Allow the helmet to dry completely after exposure to moisture or perspiration before storage. Storage: Store the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Bell MAG Rally Helmet FAQs Is the Bell MAG Rally FIA certified? Yes. The Bell MAG Rally is homologated to FIA 8859-2024 for applicable motorsport competition. Is the MAG Rally Snell SA2025 certified? Bell specifies FIA 8859-2024 homologation for the MAG Rally. Snell SA2025 certification is not listed for this model. Does the Bell MAG Rally include communications? Yes. The helmet features factory-installed ZeroNoise electronics, high-power speakers, and a noise-canceling microphone. Does the helmet include an intercom amplifier? No. The helmet includes the communication components installed inside the helmet. A compatible external intercom amplifier is purchased separately. What connector does the Bell MAG Rally use? The helmet uses a heavy-duty in-molded Female Nexus connector attached to an extendable curly communication cable. Can the MAG Rally work with other intercom brands? Bell specifies compatibility with selected amplifiers from other brands. Always verify the connector pin configuration before use. Does the helmet have a noise-canceling microphone? Yes. A noise-canceling microphone mounted on a flexible boom is included as standard equipment. What is the MAG Rally shell made from? The helmet features fiberglass composite shell construction. Does the Bell MAG Rally include a sunscreen? Yes. The adjustable racing peak is equipped with an anti-glare sunscreen to help reduce bright sunlight. Is the racing peak adjustable? Yes. Bell designed the MAG Rally with an adjustable sun peak. Does the MAG Rally include HANS anchors? Yes. Factory-installed HANS anchors are included as original equipment. Is the Bell MAG Rally suitable for co-drivers? Yes. Its open-face configuration and integrated ZeroNoise communication system make it suitable for rally drivers and co-drivers. What color is available? The MAG Rally is offered in Titanium Silver Metallic. What sizes are available? Bell lists Small, Medium, Large, and Extra Large sizes for the MAG Rally. What interior comes standard? The helmet comes with a black fire-resistant interior. Bell does not list alternative factory interior colors for this model. What is the difference between the Bell MAG Rally and MAG-10 Rally Sport? The MAG Rally is an entry-level fiberglass composite rally helmet with integrated ZeroNoise communications and an adjustable peak with anti-glare sunscreen. The MAG-10 Rally Sport uses carbon-glass composite construction and features a different integrated sunscreen and comfort configuration. Can the Bell MAG Rally be used for circuit racing? It may be used in events that permit FIA 8859-2024 open-face helmets. Always verify certification and helmet-type requirements with the event organizer. Professional Rally Communication Without the Premium Price The Bell MAG Rally FIA 8859-2024 Helmet combines modern motorsport certification, durable fiberglass composite construction, and professional ZeroNoise communication technology in a practical open-face design. With its high-power speakers, noise-canceling microphone, Female Nexus connector, adjustable sun peak, and factory-installed HANS anchors, the MAG Rally provides the essential features rally drivers and co-drivers need for competitive driving. Choose the Bell MAG Rally for dependable communication, modern FIA protection, and exceptional entry-level rally racing value.

Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet Please note: some Bell Racing helmets are in short supply with more expected by mid- to late-June 2026. If you have need for one right away, please give us a call at (844) 438-7244 before placing your order so we can confirm we have your size in stock. The Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet delivers exceptional lightweight performance, advanced impact protection, and race-proven technology for drivers competing in demanding motorsports environments. Developed through a collaboration with Penske Racing to reduce helmet weight for NASCAR applications and engineered for dirt racing, the RS7 ULTRA X-Lite combines aerospace-grade carbon fiber construction with advanced Bell Racing helmet technology. Inspired by Bell's legendary HP7 Formula 1 helmet platform, the RS7 ULTRA X-Lite features a premium ultra-lightweight carbon fiber shell, reinforced energy-absorbing liner, and a specialized sealed-front design that helps prevent dirt and debris from entering the helmet. The result is a high-performance carbon racing helmet engineered for drivers who demand reduced weight, secure fit, and outstanding visibility. Snell SA2025 certified, the Bell RS7 ULTRA X-Lite is designed for competitive automotive racing applications that accept this safety standard. Its advanced construction, Double Screen Anti-Fog (DSAF) visor, and Bell Racing SmartLock mechanism deliver the confidence and functionality needed in demanding race conditions.   Bell RS7 ULTRA X-Lite Carbon Fiber Racing Helmet Features Aerospace-Grade Carbon Fiber Shell: Premium ultra-lightweight carbon construction engineered to reduce helmet weight while maintaining strength and protection. Snell SA2025 Certification: Meets the Snell SA2025 automotive racing helmet safety standard. HP7-Inspired Design: Incorporates design technology developed from Bell's advanced Formula 1 helmet platform. Advanced Impact Protection: Reinforced, multi-density energy-absorbing liner engineered to manage impact forces. Bell Racing SmartLock Mechanism: Secure visor locking system designed to help maintain visor closure during competition. Double Screen Anti-Fog Visor: Optical-grade DSAF visor helps reduce fogging and maintain clear vision in challenging racing conditions. Sealed-Front Construction: Specialized front design helps limit dirt and debris intrusion during dirt-track and other demanding racing applications. Integrated Duckbill: Chin-area aerodynamic design suited to the helmet's specialized racing applications. Fire-Resistant Interior: High-strength, high-comfort dark gray FR interior fabric designed for motorsport use. Lightweight Comfort: Optimized shell and liner construction helps reduce weight on the driver's head during extended racing sessions. Premium Carbon Appearance: Exposed carbon fiber styling delivers a professional, race-inspired finish. Engineered for Lightweight Racing Performance Reducing helmet weight can make a meaningful difference during demanding racing sessions, particularly when drivers experience repeated acceleration, braking, and lateral G-forces. The Bell RS7 ULTRA X-Lite was developed with lightweight performance as a priority, combining an advanced carbon fiber shell with a reinforced energy-absorbing liner. Its specialized design builds upon Bell's experience in professional motorsports, including NASCAR and Formula 1 helmet development. This construction helps reduce unnecessary mass while maintaining the protective performance expected from a premium Snell-certified racing helmet. Advanced SmartLock Visor and Anti-Fog Protection Clear vision is essential for consistent lap times and safe racing. The Bell RS7 ULTRA X-Lite comes equipped with an optical-grade Double Screen Anti-Fog (DSAF) visor designed to help minimize condensation and maintain visibility during demanding track conditions. The integrated Bell Racing SmartLock mechanism provides a secure visor closure system, helping drivers maintain confidence in high-speed and high-vibration racing environments. Combined with the helmet's sealed-front construction, these features make the RS7 ULTRA X-Lite especially well suited for applications where dust, dirt, and airborne debris are common challenges. Designed for Dirt Racing and NASCAR-Inspired Performance Developed through a collaboration with Penske Racing, the Bell RS7 ULTRA X-Lite emphasizes the reduced weight and protective performance demanded by professional motorsports competitors. Unlike conventional heavily ventilated racing helmets, the X-Lite's specialized sealed-front construction is designed to help restrict dirt entry. Its aerodynamic duckbill and HP7-inspired shell provide a combination of lightweight construction, practical race functionality, and modern styling. Whether competing on dirt tracks or in other approved automotive racing applications, the RS7 ULTRA X-Lite offers a specialized helmet configuration built around visibility, comfort, and protection. Bell RS7 ULTRA X-Lite Carbon Fiber Helmet Specifications Manufacturer: Bell Racing Helmets Model: RS7 ULTRA X-Lite Helmet Type: Full-Face Automotive Racing Helmet Shell Material: Aerospace-Grade Carbon Fiber Certification: Snell SA2025 Design Platform: Bell HP7-Inspired Visor: Double Screen Anti-Fog (DSAF) Visor Locking System: Bell Racing SmartLock Front Design: Sealed Front with Duckbill Interior: Dark Gray Fire-Resistant Comfort Fabric Available Sizes: 54, 55, 56, 57, 58, 59, 60, 61, and 61+ Primary Applications: Dirt Racing, NASCAR-Inspired Racing, and Other Approved Automotive Competition Bell RS7 ULTRA X-Lite Carbon Fiber Racing Helmet Sizing Chart Proper helmet sizing is essential for comfort, stability, and protection. The Bell RS7 ULTRA X-Lite is available in sizes 54 through 61+, allowing drivers to select a fit suited to their head circumference and shape. To determine your starting helmet size, measure the circumference of your head approximately one inch above your eyebrows, keeping the measuring tape level around the widest part of your head. Take multiple measurements and use the largest consistent result. Important: Helmet fit varies by head shape and individual preference. A properly fitted racing helmet should feel snug and secure without creating excessive pressure points or moving independently of the driver's head. Bell RS7 ULTRA X-Lite SA2025 Racing Helmet FAQs What is the difference between the Bell RS7 ULTRA X-Lite and the standard RS7 ULTRA? The RS7 ULTRA X-Lite features a specialized ultra-lightweight carbon fiber construction developed with Penske Racing, along with a sealed-front design intended for dirt racing. The standard RS7 ULTRA emphasizes a 14-channel ventilation system, while the X-Lite prioritizes reduced weight and protection against dirt intrusion. Is the Bell RS7 ULTRA X-Lite Snell SA2025 certified? Yes. The Bell RS7 ULTRA X-Lite carries Snell SA2025 certification for automotive racing applications. Always verify the helmet requirements of your specific racing organization before competing. Is the Bell RS7 ULTRA X-Lite FIA 8859-2024 certified? Bell's published specifications for the RS7 ULTRA X-Lite list Snell SA2025 certification. FIA 8859-2024 approval should not be assumed for this specific X-Lite model. Drivers requiring FIA certification should verify the helmet's homologation before purchasing. Does the Bell RS7 ULTRA X-Lite have an anti-fog visor? Yes. The helmet includes a Double Screen Anti-Fog (DSAF) visor designed to help reduce fogging and maintain visibility in demanding racing conditions. What is the Bell Racing SmartLock system? SmartLock is Bell Racing's visor locking mechanism, engineered to provide secure visor closure during motorsport competition. Is the RS7 ULTRA X-Lite designed for dirt-track racing? Yes. Bell specifically developed the RS7 ULTRA X-Lite for demanding dirt racing environments. Its sealed-front design helps minimize dirt intrusion, while the ultra-lightweight carbon fiber shell contributes to driver comfort. What sizes are available? The Bell RS7 ULTRA X-Lite is offered in sizes 54, 55, 56, 57, 58, 59, 60, 61, and 61+. Drivers should measure their head circumference and confirm fit before purchasing. Does the Bell RS7 ULTRA X-Lite use the same ventilation system as the RS7 ULTRA? No. The RS7 ULTRA X-Lite emphasizes a sealed-front construction for dirt racing, rather than the standard RS7 ULTRA's 14-channel ventilation design. Race with the Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Helmet Experience the combination of professional racing technology, ultra-lightweight carbon fiber construction, and advanced visor protection with the Bell RS7 ULTRA X-Lite Carbon Fiber SA2025 Racing Helmet. Built for drivers who demand premium materials, reduced helmet weight, and race-focused functionality, the RS7 ULTRA X-Lite delivers a specialized solution for demanding automotive competition. Choose your size and upgrade to Bell's advanced lightweight carbon racing helmet technology.

Sparco AIR-15 Drag Suit Lightweight Protection For Your Fastest Runs When it’s you against the quarter-mile, every millisecond counts—and the Sparco AIR-15 Drag Suit is here to help you shave off time while keeping you cool, comfortable, and, most importantly, protected. As the lightest and most breathable SFI 15-rated drag racing suit on the market, the AIR-15 gives you the edge to leave your competition in the dust. Maximum Protection Without the Bulk Let’s face it: drag racing is about speed, precision, and leaving your rivals in awe. The AIR-15 is made from Sparco’s exclusive X-light multi-layer fabric, offering a perfect balance between weight and protection. You’ll feel like you’re wearing a second skin instead of a suit, but with all the safety of an SFI-approved armor. It’s rated SFI 3.2A/15, which means you get top-tier fire resistance without the bulk. Because in drag racing, the only thing that should be heavy is your foot on the gas. Precision Fit for Precision Driving Whether you’re pulling G’s off the line or cruising back to the pits, the AIR-15 has been designed with drag racers in mind. The suit comes in both a one-piece overall and a two-piece jacket and pants set, so you can choose the fit that works best for your racing style. Plus, features like fully floating sleeves, internal knitted cuffs, and an expandable waist ensure maximum mobility. So, when you’re making those split-second shifts or lining up the perfect launch, you won’t feel held back by your gear. Bonus points? This suit includes SFI-approved sewn-on arm restraints, so you’ll stay safe and secure without sacrificing flexibility. Sparco AIR-15 Drag Suit Key Features X-Light Multi-Layer Fabric: Unmatched comfort and breathability while providing SFI 3.2A/15 fire protection. Available in One-Piece or Two-Piece Sets: Choose the style that best suits your needs—either a single overall (in black only) or a jacket and pants combo (with a black or grey jacket). Fully Floating Sleeves and Expandable Waist: Designed to move with you, not against you, for full control on the strip. SFI-Approved Arm Restraints: Stay locked in safely during your run. Internal Knitted Cuffs: Keep everything snug while preventing unwanted shifts or movement during high-speed runs. Pants only available in Black  Frequently Asked Questions (FAQ) 1. Is the AIR-15 suit legal for competitive drag racing?Absolutely! The AIR-15 meets the SFI 3.2A/15 standard, which is required for high-speed drag racing events. You’ll be protected and compliant at all your races. 2. What’s the difference between the one-piece and two-piece options?The one-piece is perfect for those who prefer seamless protection, while the two-piece gives you the flexibility to remove the jacket between runs. Both options offer the same high level of protection and comfort. Ready to Feel the Thrill? The Sparco AIR-15 Drag Suit is your ultimate companion for the drag strip. Offering unparalleled comfort, protection, and style, it’s designed for drag racers who take their craft seriously—and want to look good while doing it. Order now and get ready to launch your racing game into overdrive!

SmartyCam GP HD 2.2 to AiM Dash Connection Cable AiM SmartyCam GP HD 2.2 and SmartyCam HD Version 1 (Black Box Camera) replacement connection cable to connect to your Solo DL, MXS, MXG, MXP, MXL2, AiM Data Logger or SMC Bridge. This is a connection cable that has a 712 5 pin male connector on one end and another 712 5 pin male connector on the other end. SmartyCam GP HD 2.2 to AiM Dash Connection Cable Details Manufacturer: AiM Sportline Manufacturer part number: V02554820 Alternate part number: AIM-MC-267 SmartyCam GP HD 2.2 and HD to AiM Dash or Data Hubs Included with all SmartyCam HD kits Length: 4 Meters (12ft) End 1: 5 Pin Male 712 Thread-On Connector End 2: 5 Pin Male 712 Thread-On Connector These CAN cables have male 5-pin 712 (screw-in) connectors at each end to connect the AiM SmartyCam GP HD 2.2, SmartyCam HD (version 1 black box looking camera) to your Solo DL. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge. Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 2". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws. The original SmartyCam and SmartyCam HD Rev 2 require a CAN cable with a 7-pin connector. Although the connectors are correct, this cable can NOT be used to connect the SmartyCam HD GP bullet camera to the base recording unit, the internal wiring is different. How do I make sure I have an original SmartyCam H.D. Rev 1? First, your SmartyCam does not have any type of microphone. Second there is a 5 pin connection (for this control cable) and a 4 pin connection for GPS antenna. If you have a 4 pin and 7 pin, the you have a new Rev 2.

Sparco Gulf Polo Piquet The Sparco Gulf Polo Piquet combines soft cotton comfort with iconic racing style. Made in Italy with a fitted European cut, this shirt brings paddock-level polish to your everyday look. Whether you're trackside, traveling, or grabbing a bite after a session, this polo lets everyone know you're serious about motorsport—even when you're off duty. Timeless Gulf Style Meets Italian Fit Features European Fit: This polo runs smaller than US sizing. We recommend ordering one size up for a comfortable fit. Premium Piqué Cotton: Made from 100% soft piqué cotton for a breathable, lightly textured feel that stands up to long days. Signature Racing Detail: Features a TPU Gulf logo patch and printed Sparco branding on the back collar. Smart Styling: Ribbed collar, two-button closure, and clean lines make this polo equally at home at the track or the office. Color Options: Available in Navy, Celeste, and White across sizes XS to 3XL. Made in Italy: True to Sparco’s racing heritage—built with quality and authenticity. Sparco Gulf Polo FAQs Is the Sparco Gulf Polo true to size? It runs smaller due to the European cut. Most customers size up for a more relaxed fit. What material is the shirt made of? It's crafted from 100% Piqué cotton—lightweight, breathable, and slightly textured. Can I wear this at the track? Absolutely. It’s perfect for pit crews, fans, and post-race hangs alike. Does it come in different colors? Yes! Choose from Navy, Celeste Blue, or White—all with official Gulf branding. Whether you're strolling through the paddock or heading to your next race weekend, the Sparco Gulf Polo Piquet brings classic Gulf energy to your everyday wardrobe. Order now and make your downtime look fast. Competition Motorsport sales@competitionmotorsport.com | 844-438-7244

SilverRocket Dry Carbon Fiber Clubsport Dive Plane & Lower Side Spoiler Pack Applications: Porsche 718 Cayman GT41 Porsche 718 Cayman GT4 RS Introducing the SilverRocket Lower Side Spoiler & Clubsport Dive Plane Pack for the Porsche 718 Cayman GT4 RS, the pinnacle of aerodynamic performance. Developed from SilverRocket's years of experience in working with renowned motorsport brands like KW and Manthey Racing, this pack embodies the culmination of our expertise in racing performance optimization. This first product in the SilverRocket 718 GT4 RS Performance Collection allows you to add or replace factory-installed lower side spoilers and dive planes to improve downforce and overall aerodynamic performance with upgraded materials and design. 1 Note: to fit the lower sider spoiler on the 718 GT4, the following parts from Porsche need to be installed: p/n 982807100A OK1 (Air Curtain Left, Black) p/n 982807544A OK1 (Air Curtain Right, Black) SilverRocket Clubsport Dive Plane & Side Spoiler Pack Highlights: Made from 100% dry carbon fiber: crafted from 100% dry carbon fiber, each aerodynamic part in this pack goes beyond OEM Porsche standards to deliver unrivaled quality and durability. Minimally invasive design: this dive plane and lower side spoiler pack can be installed with or without drilling holes in the painted bumper to fit each customer's needs. More stylish than the OEM parts:Made with the utmost care to the details, our pack offers a more sleek aesthetics than the OEM parts. Dive Plane & Lower Spoiler Function: SilverRocket Clubsport Dive Planes create additional vortexes to optimize airflow on both sides of the front wheels. At 124 mph (200 kph), the SilverRocket Clubsport Dive Planes and extended Lower Side Spoilers increase front axle downforce by 17%.

Paragon Viking Pro Cooler 12V Air and Water Cooler The Paragon Viking Pro 12V Cooler is the amped-up version of the regular Viking 12V Cooler. The Viking Pro Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The side exit Guardian bulkhead connectors on the Viking Pro Cooler are Paragon’s emergency release option, allowing easy disconnection with a quick pull on the connected hose set or garment. The Viking Pro 12V Cooler is available in 12L or 18L capacity and works seamlessly with most cool suit brands. Paragon Pro 12V Cooler Dimensions 12 Liter: 10 lbs, 19" x 13" x 13" 18 Liter: 10 lbs, 19" x 13" x 13" Paragon cooling garments are sold separately.

Speed Link Bluetooth Wireless Intercom System Wireless Bluetooth Intercom Made Easy The Speedcom SCC-SPDLIK Speed Link Wireless Intercom lets you talk freely between driver to coach, side by side, and also with a chase vehicle. The Speed Link Wireless Intercom is designed for two to six users at a time, integrating into each helmet with a durable, easy-to-use side clip that's simple to remove for charging. The Bluetooth capability of the Speedcom Speed Link Wireless Intercom allows you to pair it to a cell phone to listen to music, take phone calls, and other phone operations. Speed Link can communicate with third-party wireless intercoms so you can use this with other drivers who may not have Speed Link. The Best Noise-Cancelling Mic In The Business Speedcom's patented RTM microphone is integrated into the Speed Link system for the ultimate noise-cancelation experience. RTM technology diffuses the ambient sound waves away from the microphone element and cancels out up to 95% of background noise. The RTM microphone delivers performance superior to any other microphone available. Easily Integrate In-Ear Speakers and Ear Buds The Speedcom Speed Link Wireless Bluetooth Intercom comes standard with Speedcom SCC-HSK3.5 in-helmet speakers. The system's 3.5mm (1/8-in.) audio plug also makes it easy to swap in the earpiece or ear buds of your choice. See the drop-down menu above for great options to upgrade to Speedcom Custom Ear Mold in-ear speakers (SCC-CEM), Semi-Custom Ear Mold 1 in-ear speakers (SCC-SCEM), or Challenger-style Foam Ear Buds (SCC-FEP). Speedcom Speed Link Wireless Intercom System Details: Manufacturer: Speedcom Manufacturer part number: SCC-SPDLINK Earpiece jack: standard 3.5mm (1/8-in.) TS female Included speakers: Speedcom SCC-HSK3.5 Optional in-ear speakers available: Yes 1 Semi-Custom Ear Mold sizing: You'll need a dime, a nickel, and a quarter to determine proper sizing. One at a time, gently fit each coin into your outer ear cavity. The coin that fits most comfortably and securely in your outer ear indicates your Speedcom SCC-SCEM size. A dime corresponds to Small, a nickel corresponds to Medium, and a quarter corresponds to Large.