Sparco Superleggera Driver Race Suit The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera racing fire suit is not only lightweight but it is also one of the most comfortable Sparco race suits available. It features special four-way stretch panels that run down each side from the underarm to the hip. These side stretch panels combined with a rear stretch panel give drivers incredible mobility and comfort in the seated position. The Sparco Superleggera driver race suit adds breathable inner-thigh stretch panels, 360º fully-floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated. Sparco Superleggera Driver Race Suit Details: FIA 8856-2018 and SFI 3.2A/5 approved The lightest FIA suit on the market Pre-curved arms and legs for a natural fit Lightweight zipper and collar Inner-thigh stretch panels Multiple strategically placed four-way stretch panels

Sparco EVO QRT Performance Racing Seats 2028 Expiry The Performance version of the Evo brings the famous Sparco Seat to the top with leather and alcantara upholstery.  Looks as good on the street as on the track.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved The  Sparco EVO QRT Racing Seat DIMENSIONS EVO S Dimensions:     EVO Std Dimensions: EVO L / XL Dimensions:

Sparco Martini Racing Driver Suit The Golden Age of Rally Racing Brought Back to Life! In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Martini Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Martini Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Martini Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Martini Replica Race Suit Details: Martini Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA approved

Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)

Sparco Circuit / Circuit II QRT Racing Seat    The Sparco Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramadic fiber-reinforced fiberglass with all-new QRT technology, the Sparco Circuit QRT has an ultra-light shell. The Sparco Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit QRT is FIA approved and available in two sizes: Circuit QRT (Standard) and Circuit II QRT (Large). SPARCO QRT TECHNOLOGY QRT technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach weight of carbon fiber seat at the price of a fiberglass composite seat. Sparco Circuit QRT Race Seat Technology QRT technology – 30% weight savings Ultra-light Aramadic fiber-reinforced fiberglass shell Integrated head bolsters for greater safety HANS device compatible Fire retardant fabric FIA approved The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. Sparco Circuit QRT Fiberglass Racing Seat Details Manufacturer: SparcoManufacturer part number: 008019RNRRating: FIA 8855-1999Mounting: SideWeight: Shell Only: 19.73lbsHans CompatibleUltra-light Aramaic fiber-reinforced fiberglass shellIntegrated head protectionNo-slip fabric for shoulders and bottom cushionSmooth and slim backrest for high lateral supportPre-shaped thigh cushion helps separate the driver's legsSelf-extinguishing fabric   Sparco Circuit QRT Race Seat Dimensions

Sparco Pro ADV QRT Racing Seat The Sparco Pro-ADV competition seat is the result of a collaborative partnership between Sparco and FIA. The goal was to identify ways to improve safety. The results are new levels in ergonomics, materials and above all safety, are all found in the Sparco Pro-ADV seat. Increased rigidity and the use of impact-absorbing materials are the major advances found in the Sparco Pro-ADV.  The Sparco ADV QRT holds the title of Sparco's Best head-restraint seat. Sparco has offered the Pro ADV for many years, but the latest update to the Pro ADV QRT is that it receives Sparco's QRT Ultra-Light Technology, offering an industry unmatched strength-to-weight ratio for fiberglass composite seats. The head restraint shape has been tweeked to better fit smaller cockpits, while the overall seat dimensions still fit Medium-to-Large drivers up to a 35" waist. The new Sparco PRO ADV QRT is an upgraded evolution of the original Sparco PRO ADV. The new PRO ADV QRT features a new head restraint redesign that allows better fitment with vehicles with smaller cockpits. The Sparco PRO ADV QRT will fit a medium/large size driver (up to 35 inch waist). The Sparco Pro ADV QRT is made with all-new QRT Technology which results in an ultra-light shell. The Sparco Pro-ADV QRT is FIA-approved. WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO PRO ADV QRT RACING SEAT TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent head and shoulder protection Special non-slip fabric for shoulders and bottom cushion Excellent ergonomics Fire retardant fabric FIA approved SPARCO PRO ADV QRT RACING SEAT DIMENSIONS

X-20 Drag Racing Suit: Lightweight Protection for High-Speed Action! Ready to feel invincible on the drag strip? Enter the X-20 Drag Racing Suit—a blend of protection, comfort, and style that doesn’t mess around when it comes to keeping you safe at top speed. This isn’t your average suit; it’s a 7-layer fortress of protection made from our exclusive X-Light fabric. Whether you’re flooring it in a Top Fuel dragster or just trying to shave milliseconds off your ET in a door-slammer, the X-20 has you covered—literally. Features that Speak for Themselves (and Maybe Even Yell "GO!") SFI 3.2A/20 Approved – Translation: This suit is built to handle extreme heat and impact, meeting the highest safety standards in the sport. Exclusive X-Light Fabric – It’s like wearing a cloud that’s been beefed up for battle. You get breathability and flexibility without giving up protection. Fully Floating Sleeves – Mobility matters when you’re strapped in, so we’ve got you covered with sleeves that let you steer, shift, and fist pump when you crush that quarter-mile. Expandable Waist & Internal Knitted Cuffs – Because comfort matters. A stretchy waist and snug cuffs make sure this suit fits just right, so you can focus on hitting the throttle. One Piece or Two? – Choose between a single-piece overall or a two-piece jacket and pants set. Either way, you’re winning in style. Let’s Get Specific SFI Rating: 3.2A/20 Material: 7 layers of X-Light fabric Design: Box-quilt stitching for extra durability Options: Available as a one-piece suit or two-piece jacket and pants set Size Range: (Insert size details here) – Fits like a glove… that’s also fireproof. FAQs AnsweredQ: Is the X-20 suit fireproof?A: You bet! With its SFI 3.2A/20 rating, this suit can withstand intense heat, protecting you from the fire risks inherent in drag racing. Q: Can I wash my X-20 suit at home?A: Not quite. Due to the specialized materials and construction, you’ll want to have this suit professionally cleaned to maintain its protective properties. Q: How should the X-20 fit?A: Think snug, but not restrictive. The expandable waist and internal cuffs will help it conform to your body while allowing freedom of movement where you need it most—like your arms and legs. Q: Is this suit approved for professional drag racing?A: Absolutely! The X-20 meets SFI 3.2A/20 standards, so you’re race-ready whether you’re competing in sanctioned events or just breaking personal records. Call to ActionSo, are you ready to suit up and unleash your inner speed demon? The X-20 Drag Racing Suit is built for the bold, for the racers who want to feel light, move fast, and stay protected. Don’t just imagine yourself crossing the finish line—make it a reality. Get your X-20 Drag Racing Suit today and feel the difference between a race and a victory!

Sparco Prime LT Limited Edition Driver Race Suit The Sparco Prime LT is a limited edition driver's race suit available only for the US market. The Sparco Prime LT race suit has a bold design  two featuring two colorways. This is a limited edition suit, the Sparco Prime LT is available only as long as supplies last. The Sparco Prime LT uses suit material originally developed for the McLaren Formula One team, making it one of the lightest FIA approved racing suits in the world. The Sparco Prime LT boasts unparalleled technological features created in the Sparco R&D laboratories, a project optimizing every detail of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and the stitching flattened even more. The Sparco Prime LT features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort woven using the Kompact system. The material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime LT racing suit weighs from 240 to 270 grams per square meter (depending on size). Sparco Prime LT Driver Race Suit Details: Lightest FIA approved racing suit in the world Exclusive DuPont Nomex fibers provide superior fire protection, breathability, and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels throughout FIA 8856-2000 approved

Sparco Pro 2000 QRT Martini Racing Seat ICONIC MARTINI RACING MOJO INJECTED INTO SPARCO'S ICONIC PRO 2000 The Pro 2000 QRT Martini Racing Edition (size Medium only, up to a 34” waist) is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches.  The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved.  WHAT IS QRT TECHNOLOGY? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO PRO 2000 QRT RACING SEAT TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved SPARCO PRO 2000 QRT DIMENSIONS

Sparco Sky RF-7W Carbon SA2020 The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (including new M/L size using Sparco's smaller, lighter shell) with a red or black interior. Sky RF-7W has HANS posts pre-installed. SNELL 2020 and FIA 8859-2015 approved. ADDITIONAL SPARCO SKY RF-7W HELMET SHIELDS AVAILABLE HERE SPARCO SKY RF-7W CARBON FIBER HELMET FEATURES Choose red or black interior color Light weight carbon fiber with carbon-kevlar base layers New "Medium/Large" size uses the lighter and more compact shell HANS posts pre-installed Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system (sold separately). SNELL SA2020 and FIA 8859-2015 approved   Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag, the perfect way to keep your new Sparco Sky RF-7W auto racing helmet safe and secure throughout each race weekend. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco AIR-15 Drag Suit: Lightweight Protection for Your Fastest Runs When it’s you against the quarter-mile, every millisecond counts—and the Sparco AIR-15 Drag Suit is here to help you shave off time while keeping you cool, comfortable, and, most importantly, protected. As the lightest and most breathable SFI 15-rated drag racing suit on the market, the AIR-15 gives you the edge to leave your competition in the dust. Maximum Protection Without the Bulk Let’s face it: drag racing is about speed, precision, and leaving your rivals in awe. The AIR-15 is made from Sparco’s exclusive X-light multi-layer fabric, offering a perfect balance between weight and protection. You’ll feel like you’re wearing a second skin instead of a suit, but with all the safety of an SFI-approved armor. It’s rated SFI 3.2A/15, which means you get top-tier fire resistance without the bulk. Because in drag racing, the only thing that should be heavy is your foot on the gas. Precision Fit for Precision Driving Whether you’re pulling G’s off the line or cruising back to the pits, the AIR-15 has been designed with drag racers in mind. The suit comes in both a one-piece overall and a two-piece jacket and pants set, so you can choose the fit that works best for your racing style. Plus, features like fully floating sleeves, internal knitted cuffs, and an expandable waist ensure maximum mobility. So, when you’re making those split-second shifts or lining up the perfect launch, you won’t feel held back by your gear. Bonus points? This suit includes SFI-approved sewn-on arm restraints, so you’ll stay safe and secure without sacrificing flexibility. Sparco AIR-15 Drag Suit Key Features X-Light Multi-Layer Fabric: Unmatched comfort and breathability while providing SFI 3.2A/15 fire protection. Available in One-Piece or Two-Piece Sets: Choose the style that best suits your needs—either a single overall (in black only) or a jacket and pants combo (with a black or grey jacket). Fully Floating Sleeves and Expandable Waist: Designed to move with you, not against you, for full control on the strip. SFI-Approved Arm Restraints: Stay locked in safely during your run. Internal Knitted Cuffs: Keep everything snug while preventing unwanted shifts or movement during high-speed runs. Pants only available in Black  Frequently Asked Questions (FAQ) 1. Is the AIR-15 suit legal for competitive drag racing?Absolutely! The AIR-15 meets the SFI 3.2A/15 standard, which is required for high-speed drag racing events. You’ll be protected and compliant at all your races. 2. What’s the difference between the one-piece and two-piece options?The one-piece is perfect for those who prefer seamless protection, while the two-piece gives you the flexibility to remove the jacket between runs. Both options offer the same high level of protection and comfort. Ready to Feel the Thrill? The Sparco AIR-15 Drag Suit is your ultimate companion for the drag strip. Offering unparalleled comfort, protection, and style, it’s designed for drag racers who take their craft seriously—and want to look good while doing it. Order now and get ready to launch your racing game into overdrive!

Sparco Pro ADV QRT Sim Racing Seat Professional Racing Feel. Built for Sim Immersion. This seat is neither FIA nor SFI approved, not for racing or competition use. The Sparco Pro ADV QRT Sim Racing Seat brings professional motorsport design to the world of sim racing and esports. Modeled after the FIA-homologated Pro ADV QRT competition seat, this simulator version delivers the same ergonomic design and head protection but is optimized for gaming rigs and simulator setups. Constructed using Sparco’s exclusive QRT (Quick Resin Technology) process, the Pro ADV QRT Sim Seat combines lightweight durability with authentic racing ergonomics. With integrated head bolsters, fire-retardant-style upholstery, and a supportive shell, it offers unparalleled immersion and comfort for long gaming sessions. Features & Benefits Authentic Motorsport Design: Based on the Sparco Pro ADV QRT competition seat. QRT Technology Shell: Lightweight construction derived from racing seat innovation. Head Protection Bolsters: Enhanced realism and ergonomic support for sim racing. Premium Sparco Upholstery: Durable, racing-inspired fabric for comfort and longevity. Immersive Fit: Designed to lock the driver in place for esports and long practice sessions. Sim-Ready: Built for sim rigs and gaming; not FIA-approved for competition use. Technical Specifications Model: Sparco Pro ADV QRT Sim Racing Seat Construction: Lightweight QRT shell Design: Head protection with ergonomic bolsters Cover Material: Sparco racing-style upholstery Intended Use: Simulator and gaming only (not FIA-approved) Why Choose the Sparco Pro ADV QRT Sim Seat? With its lightweight QRT shell, ergonomic bolsters, and authentic racing feel, the Sparco Pro ADV QRT Sim Racing Seat transforms your gaming rig into a professional-grade cockpit. Whether you’re competing in esports or practicing endurance sessions, this seat provides the comfort, immersion, and performance that only Sparco can deliver.

Sparco Circuit QRT Gaming Seat Race-Ready Design. Built for Sim Performance. This seat is neither FIA nor SFI approved, not intended for racing or competition use. The Sparco Circuit QRT Gaming Seat brings Sparco’s world-class racing heritage into the world of sim racing and esports. Modeled after the professional Sparco Circuit QRT competition seat, this gaming version offers the same aggressive styling and ergonomic design but is adapted specifically for simulator use. Constructed with QRT (Quick Resin Technology), the Circuit QRT Gaming features a lightweight, durable shell and integrated head bolsters for added immersion and authentic racing ergonomics. Covered in premium Sparco upholstery, this seat delivers both comfort and support for long sim sessions while maintaining the iconic motorsport look. Features & Benefits Authentic Racing Design: Based on the Sparco Circuit QRT competition seat. QRT Technology Shell: Lightweight and durable construction for gaming setups. Integrated Head Bolsters: Provides head and neck support for immersive simulation. Premium Upholstery: Durable Sparco fabric with racing-inspired styling. Ergonomic Support: Designed for comfort and stability during extended sessions. Sim-Ready: Built for esports, simulator rigs, and gaming enthusiasts. Technical Specifications Model: Sparco Circuit QRT Gaming Seat Construction: QRT lightweight shell Design: Head protection bolsters, ergonomic fit Cover Material: Durable Sparco gaming upholstery Intended Use: Simulator and gaming only (not FIA-approved for motorsport) Why Choose the Sparco Circuit QRT Gaming Seat? The Circuit QRT Gaming Seat offers sim racers a professional-grade experience with authentic Sparco racing ergonomics. With its lightweight construction, integrated head bolsters, and premium upholstery, this seat gives you the look, feel, and support of a true racing cockpit—perfect for esports, simulator rigs, and immersive racing experiences.

Sparco Victory 3.0 Driver Race Suit The lightweight and breathable Sparco Victory 3.0 racing suit is feature packed, beginning with Sparco's incredible, lightweight HOCOTEX® fabric construction, comfort stretch panels, and dual SFI 3.2A/5 and FIA 8856-2018 homologations. Built in Italy with pride, the lightweight and breathable Sparco Victory 3.0 brings the performance of professional race suits costing twice as much to weekend racers. It's hard to improve on a classic, but Sparco did just that when they updated the Sparco Victory racing suit in 2023. Largely keeping the popular classic Victory design, Sparco added modern color options along with an improved cut, style, and fit. An improved stretch panel on the lower-back enhances mobility, while pre-formed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX® fabric technology makes use of an intricate honeycomb structure with thousands of protective microcapsules woven into a super-thin and breathable fabric. Twice as breathable as other medium-priced race suits, the Sparco Victory 3.0 HOCOTEX® technology replaces the multi-layer construction found in every other race suit on the market. All while maintaining dual SFI 3.2A/5 and FIA 8856-2018 certifications for zero compromise in protection! Sparco Victory 3.0 Driver Race Suit Details Soft and lightweight Twice as breathable as a standard multi-layer race suit Single layer HOCOTEX® construction, multi-layer protection Hidden front pockets Fully-floating pre-formed sleeves with stretch panels Additional flexible gusset in shoulders and armpits Three years of research and development HOCOTEX® patented sparco technology – made in Italy Only single layer SFI 3.2A/5 race suit on the market Ratings: FIA 8856-2018 and SFI 3.2A/5