00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet
$3,999.66
$5,500.00
Stilo ST5 GT ZERO 8860-2018 Carbon Helmet
 
An Auto Racing Helmet With Zero Compromises
The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere.
The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there.
For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Fiber Helmet.
Increased Visibility is Increased Safety
The Stilo ST5 GT Zero 8860-2018 carbon fiber helmet has a taller, lower eyeport giving you better visibility without compromising your safety. Each visor has a center pinch-clip so opening and closing are easy even while wearing Nomex racing gloves.
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
Stilo ST5 GT ZERO Carbon Details
FIA 8860-2018 certified
Small Shell Weight: 2.5 lbs (1130g) up to size L (59) with intercom
Large Shell Weight: 2.7 lbs (1230g) up to size 3XL (64) with intercom
All Stilo ST5 shields can be used with this helmet
Includes standard HANS post anchors
Includes Stilo Helmet Bag Plus HANS for your helmet and HNR
Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.)
Re-designed cheek pads are more contoured and comfortable than previous helmets
Stilo ZERO shells are the lightest FIA 8860-2018 helmets available
This helmet will ship to you with signature required for delivery.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet
$2,199.66
$3,000.00
Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet
The Stilo Helmet ST5 GT 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strictest FIA 8860-2018 regulations. It is also the helmet of choice for drivers who won’t compromise their safety, no matter what or where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance.
A Premium Racing Helmet that is Ultralight and Adaptable
The Stilo Helmet ST5 GT 8860-2018 is among the lightest carbon fiber racing helmets on the market. With its two integrated side ports, it can be outfitted with any combination of electronics, side- or top-forced air, hydration, and a helmet eject system. Thanks to Stilo's innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless. When not in use, you don't even know these features are there.
Looking for increased visibility? The Stilo ST5 GT 8860-2018 has a taller and lower eyeport, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
At Competition Motorsport, we've found that customers who typically wear a size 59 in other helmet brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Details:
Manufacturer: Stilo Helmets
Model number: AA0700AG1R
Homologation: FIA 8860-2018
Construction: 100% medium tensile carbon
Stilo HANS posts: included
Sizing: Extra Small through 3XL
Compatible shields: Stilo ST5
Eight ventilation holes for Stilo Helmets Top Air systems
Prepped for side and front drinking systems
Weight (intercom included):
Small shell (54-59cm) 1.37 kg, 3.0 lbs
Large shell (60-64cm) 1.47 kg, 3.2 lbs
Other Great FIA 8860-2018 Helmets From Stilo
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 N ZERO 8860-2018 Carbon Helmet
Measuring Your Head
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Schuberth
Schuberth SP1 Carbon Fiber Helmet SA2020
$1,499.66
$2,199.00
Schuberth SP1 Carbon Fiber Helmet
Carbon Fiber Beauty Snell SA2020 & FIA 8859-2015 Certified
With nearly 100 years dedicated to developing head protection solutions, and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series,  Schuberth presents its first motorsport helmet with both FIA 8859-2015 and Snell SA2020 certifications: the Schuberth SP1 Carbon Fiber Auto Racing helmet.
Schuberth SP1 Carbon Fiber Helmet Aerodynamics & Ventilation
The SP1 Carbon Fiber Helmet was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air.
Schuberth SP1 Carbon Fiber Helmet Communication System Ready
Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms.
Schuberth SP1 Full Carbon Fiber Shell & 3mm Visor Shield
Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The Schuberth SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design.
The Schuberth SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed.
Schuberth SP1 Carbon Fiber Helmet Available Accessories
Schuberth SP1 Top Air Available Here
Schuberth SP1 Individual Vent Scoops Available Here
Schuberth SP1 Visors Available here
Schuberth SP1 Scoops Available Here
Schuberth SP1 Carbon Fiber Helmet Weight
Small shell (XS to L): 3.0 lb (1.36 kg)
Large shell (L+ to XXL): 3.2 lb (1.46 kg)
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5.1 GT Composite Helmet SA2020
from $599.95
$999.00
Stilo ST5.1 GT Composite Racing Helmet
The Most Customizable Helmet in the World
The Stilo ST5.1 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5.1 GT Composite auto racing helmet offers superior safety and protection compared to fiberglass and composites of competitors helmets. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility.
With its large eye port, the Stilo ST5.1 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (although some sanctioning bodies require FIA 8860 homologated helmets.)
Flexibility and Functionality Built In
The Stilo ST5.1 GT Composite is unsurpassed in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there.
Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market.
Additional shields in many tints and colors can be added in the dropdown above.
Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use.
Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the larger shell. Please order accordingly.
Stilo ST5.1 GT Racing Helmet Details
Noise attenuating earmuffs are included to reduce exterior noise.
Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet.
Snell SA2020 certification offers increased protection at higher g-forces and speeds than SA2015.
Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets.
Sizes shown in centimeters
Other Stilo ST5-Series Helmets Available
Stilo Helmets ST5.1 GT Carbon Helmet
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 GT 8860-2018 Carbon Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
HJC
HJC H10 Carbon Fiber Helmet SA2020
$549.66
$799.99
HJC H10 Carbon Fiber SA2020 Helmet
The HJC H10 Carbon Fiber SA2020 helmet is the ideal helmet for all types of racing. From the your local track day to the starting line at SCCA Nationals, its comfortable fire-resistant, moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keep you cool and comfortable. The HJC H10 Carbon is an affordable alternative to more expensive carbon fiber helmets without sacrificing fit, feel or safety.
HJC H10 CARBON FIBER AUTO RACING HELMET FEATURES
Snell SA2020 approved
HJC H10 carbon fiber Helmet weight (size L): 3.2 lbs (1.45 kg)
Carbon fiber composite weave shell is extremely light weight
Superior fit and comfort using advanced CAD technology
ACS (Advanced Channeling System) provides front-to-back airflow flushing heat and humidity up and out
Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome
Optional clear spoiler is available
Polycarbonate anti-fog shield with tear-off posts
Pre-installed M6 terminals for head and neck restraints
Improved front ventilation
Double D-ring retention system
HJC H10 CARBON FIBER AUTO RACING HELMET SIZES
Sizes XS-XXL
ADDITIONAL HJC H10 CARBON FIBER HELMET SHIELDS AVAILABLE HERE
Also, check out the Competition Motorsport Performance Racing Helmet Bag, the best way to keep your new HJC H10 Carbon safe and secure throughout each race weekend.
SIZE CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
XS
54-55
6 3/4 – 6 7/8
21 1/4 – 21 5/8
S
56-57
7 – 7 1/8
22 – 22 1/2
M
58-59
7 1/4 – 7 3/8
22 7/8 – 23 1/4
L
60-61
7 1/2 – 7 5/8
23 5/8 – 24
XL
62-63
7 3/4 – 7 7/8
24 3/8 – 24 3/4
XXL
64-65
8 – 8 1/8
25 1/4 – 25 5/8
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Bell
Bell BR8 Helmet SA2020
$399.66
$699.95
Bell Racing BR8 Helmet SA2020
Designed for dirt track and other forms of off-road racing, the versatile Bell Racing BR8 can be used in multiple configurations including standard, left- or right-side forced air, left- or right-3/4 top forced air, or top forced air. Bell has developed an innovative system (the kit is included with the helmet) so racers can customize the BR8 to adapt to different forms of racing and seat configurations, providing the ultimate flexibility in one auto racing helmet model. The Bell Racing BR8 features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal that prevents shield fogging, and rear-facing venturi airflow vents to prevent dust from entering the helmet while still allowing forced air to flow in. The Bell Racing BR8 features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups.
Bell BR8 Auto Racing Helmet Colors & Sizes
The Bell Racing BR8 helmet comes in Gloss White and Matte Black in the following sizes:
57-58cm
58-59cm
60cm
61cm+
Bell BR8 Auto Racing Helmet Details
Construction: Lightweight composite shell
Safety Technology: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Comfort Technology: Integrated channels in face piece offer multiple options to install drink tube and radio system
Aero: +Includes front duckbill to enhance aerodynamic performance
Ventilation: Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering
Interior: Black High Strength/High Comfort FR Fabric
Colors: Gloss White or Matte Black
Homologation: Snell SA2020
Forced air kits available for aftermarket including quick lock (V10) and are fully compatible with Maglock
M6 terminals pre-installed for FHR/HANS anchor attachment
Additional Bell Racing BR8 Visor Shields Available Here
Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Bell
Bell K1 Sport Helmet SA2020
$299.66
$459.95
Bell K1 Sport Helmet SA2020
The Bell K1 Sport SA2020 is a race-ready, multi-use, full-featured auto racing helmet, combining superior ventilation with modern styling built for the entry-level racer demanding high quality at an affordable price. Incorporating a lightweight composite shell, excellent fit, and multiple ventilation options, the all-purpose K1 Sport is a perfect choice for racers on a budget or track-day enthusiasts just entering the sport.
ADDITIONAL BELL K1 SPORT SHIELD OPTIONS AVAILABLE HERE
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL K1 SPORT racing helmet safe and secure throughout each race weekend.
BELL K1 SPORT AUTO RACING HELMET COLORS
Gloss White
Metallic Black
Safety Orange (Offshore Racing)
Titanium Silver
BELL K1 SPORT AUTO RACING HELMET FEATURES
Snell SA2020 approved.
Lightweight composite shell.
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.
Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed.
Superior ventilation with direct flow chin bar vents, forehead vents, and top vents.
Air Intake, rear spoiler, top gurney, and chin bar gurneys available separately.
Forced air attachments available separately for use with external cooling systems.
M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices.
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet.
Shield and pivot kit: 287 SRV, SRV-1.
Sizes: XXS, XS, S, M, L, XL
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
HJC
HJC H70 Top Air Helmet SA2020
$299.66
$549.99
HJC H70 Top Air Auto Racing Helmet
Whether you're navigating the sand dunes of Baja or on the banked turns of the Nürburgring, HJC Motorsports has you covered with the release of its most versatile helmet to date: the all-new H70. Designed with a straightforward approach, the H70 is at home in nearly any driving conditions with the help of a few key attachments already in the box: a rear spoiler for open-cockpit driving and a top forced-air kit for vehicles outfitted with filtered air systems. Complete with factory installed M6 terminals for your favorite head and neck restraint, the HJC H70 will have you ready to take on your favorite race track anywhere in the world.
HJC H70 AUTO RACING TOP AIR HELMET FEATURES
Snell SA2020 and FIA 8859-2015 approved
Advanced Fiberglass Composite Shell (with two shell sizes, XS-M and L-XXL)
Advanced Air Circulation System: two front intakes and eight top vents
Fire resistant moisture-wicking removable and washable cheek pads and head liner
Polycarbonate anti-fog shield with tear-off posts
Double D-ring retention system
Pre-installed M6 terminals for head and neck restraints
Optional shields available: Amber, Dark Smoke, Dark Blue, Fire Red, and Black Chrome
Sizes: XS - XXL
HJC H70 AUTO RACING TOP AIR HELMET INCLUDED ACCESSORIES
Vent Plugs (8 pcs)
Lower Vent Cover
Top Forced Air
Rear Spoiler
ADDITIONAL SHIELDS AVAILABLE HERE
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new HJC H70 racing helmet safe and secure throughout each race weekend.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
HJC
HJC H10 Helmet SA2020
$199.66
$339.99
HJC H10 SA2020 Auto Racing Helmet
The HJC H10 SA2020 Helmet is the ideal helmet for all types of racing. HJC H10 has a comfortable Fire Resistant Moisture-wicking Comfort-Carbon interior and Advanced Ventilation System to keep you cool and comfortable. The HJC H10 SA2020 Helmet is the ONLY affordable alternative.
ADDITIONAL SHIELDS AVAILABLE HERE
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new HJC H10 racing helmet safe and secure throughout each race weekend.
HJC H10 AUTO RACING HELMET FEATURES
Snell SA2020 approved
Advanced Fiberglass Composite Weave shell provides light weight, superior fit and comfort using advanced CAD technology
ACS Advanced Channeling System: front-to-back airflow flushes heat and humidity up and out
Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome
Optional clear spoiler is available
Anti-fog shield with tear-off posts
Pre-installed M6 terminals for head and neck restraints
Improved front ventilation
Sizes XS - XXL
SIZE CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
XS
54-55
6 3/4 – 6 7/8
21 1/4 – 21 5/8
S
56-57
7 – 7 1/8
22 – 22 1/2
M
58-59
7 1/4 – 7 3/8
22 7/8 – 23 1/4
L
60-61
7 1/2 – 7 5/8
23 5/8 – 24
XL
62-63
7 3/4 – 7 7/8
24 3/8 – 24 3/4
XXL
64-65
8 – 8 1/8
25 1/4 – 25 5/8
