Bell

Bell MAG-10 Rally WW Carbon Fiber Helmet FIA8859-2024 / SA2025 Expected ETA: November 2025 The Bell MAG-10 Rally Carbon WW is a revolutionary open-face rally helmet that brings wired and wireless communication together in one seamless package. Built on Bell’s lightweight carbon shell and certified to FIA 8859-2024 and Snell SA2025 standards, this helmet is designed for rally drivers and co-drivers who demand maximum safety, advanced technology, and flawless communication. With integrated Zeronoise® WW (Wired-Wireless) electronics, it eliminates the need for separate modules or adapters—making it the most complete rally helmet solution on the market today. Wired and wireless communication built into the helmet Features • Ultra-lightweight carbon fiber shell for strength and reduced driver fatigue • Dual-homologation: FIA 8859-2024 approved and Snell SA2025 certified • Integrated Zeronoise® WW system combining wired and wireless communication • Automatic, seamless switching between wired and wireless without interruptions • Adaptive noise-cancelling technology for clear audio in high-noise rally environments • Built-in wireless module, connector, and battery—no external components needed • Fully compatible with all major rally intercom systems • Advanced ventilation system to keep drivers cool and focused • Adjustable sun peak with anti-dazzle strip for better visibility • Removable, washable cheek pads and liner for comfort and easy maintenance • Hans® anchor points factory-installed for head and neck restraint systems Why choose the MAG-10 Rally WW? The Bell MAG-10 Rally WW is more than just a helmet—it’s a communication breakthrough. With both wired and wireless systems integrated, you can connect with any intercom setup and switch seamlessly without missing a call. The adaptive noise cancellation ensures crystal-clear audio even in the loudest rally stages, while the carbon shell keeps weight low for long-term comfort. For serious rally competitors, it’s the ultimate combination of safety, technology, and convenience. Bell MAG-10 Rally WW Carbon Fiber Helmet FAQs: What makes the WW version unique? It integrates both wired and wireless communication directly into the helmet, eliminating the need for external modules or adapters. Is it FIA approved? Yes, it carries FIA 8859-2024 homologation and Snell SA2025 certification, ensuring top-level motorsport safety compliance. How does the communication system switch modes? The Zeronoise® WW system automatically and seamlessly switches between wired and wireless communication with no interruptions. Will it work with my intercom? Yes, it’s fully compatible with all intercom systems used in rallying, offering maximum flexibility. Who should choose the WW model? Rally drivers and co-drivers who want the convenience of wireless communication without losing wired compatibility or reliability. The Bell MAG-10 Rally WW Carbon Fiber Helmet FIA8859-2024 / SA2025 redefines rally communication. Order today and experience the perfect fusion of lightweight safety and cutting-edge technology. Bell Helmet Chart  

Bell GT6 RD Carbon-4C/EC Helmet (FIA 8859-2024 / SA 2025) This is a pre-order, shipping after Q3 2025. The Bell GT6 RD Carbon-4C/EC delivers pro-grade safety and communication in a lightweight, closed-cockpit package. Drawing design inspiration from the aggressive HP6 platform, it features a wide eyeport for integrated visibility, a premium carbon composite shell, and all-in communications and hydration solutions built in. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). Carbon-4C/EC” in model name means the helmet is a Carbon Composite 4-layer shell with EC (electronic comms) kit integration. Ultra-Light Carbon Construction Meets Pro Racing Preparedness Built with superior carbon-glass composite materials, the helmet keeps fatigue low and track awareness high. Integrated ZeroNoise® electronics, high-power speakers, and a noise-canceling mic ensure outstanding comms and sound insulation. The face piece is also optimized for ventilation and hydration—perfect for endurance and closed-cockpit racers. Helmet Details Design Derived From: HP6 RD-4C platform Shell: Ultra-lightweight carbon-glass composite Certifications: FIA 8859-2024 and Snell SA 2025 Eyeport: Wide for expanded visibility ZeroNoise® Comms: Built-in speakers, noise-canceling mic, and heavy-duty coil cable with Nexus connector Hydration: Integrated drink-tube channels and side connectors Ventilation: Extraction vents + optional top/side forced-air intake compatibility HANS Anchors: Factory-installed for added safety Color & Finish: Gloss Carbon Interior: Dark grey, high-strength FR fabric (alt interior colors by special order) Sizes: 54 (6¾) through 61+ (7 ⅝) Key Features ZeroNoise® comms system with integrated hardware Hydration-ready channels and connectors Exhaustive airflow design with optional accessory compatibility Carbon shell with impact-absorbing multi-density liner Wide eyeport ideal for closed-cockpit sight lines Optional ear muff covers for enhanced noise insulation Compatible with drink-tube and radio system integration Factory HANS anchor integration for maximum safety Bell GT6 RD Carbon-4C/EC Helmet FAQs What does “4C/EC” mean?4C stands for Carbon-Glass Composite shell, and EC indicates electronic communication and hydration integrations are factory-installed. Which helmet series does this come from?Derived from the closed-cockpit GT6 platform with HP6 lineage—designed for serious GT and endurance racers. What communication system is included?An integrated ZeroNoise® kit with high-power speakers, a noise-canceling mic, Nexus connector, and hydration ports come built in. Can I add forced air later?Yes. Compatible top and side intake kits are available for enhanced cooling. Is this track-legal?Yes. It’s dual-certified to FIA 8859-2024 and Snell SA 2025—check your series rules to confirm. What customization options exist?Alternate interior colors, ear muff covers, and aero accessories are available by special order or as add-ons. Race with lightweight carbon construction, pro-level comms, and cockpit-focused visibility.

Bell GT6 RD Carbon-4C Helmet This is a pre-order, shipping after Q3 2025. The Bell GT6 RD Carbon-4C is a closed-cockpit performance helmet built for drivers who want ultra-light carbon construction with integrated communications and hydration capability out of the box. A wide eye port, refined aerodynamics, and efficient ventilation keep vision clear and fatigue low through long stints. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a four-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77, which use pure carbon/advanced aerospace layups). In this helmet, "RD-4C” means the helmet is a Carbon Composite 4-layer shell with RD (radio/drink) kit integration. Designed for GT and Closed-Cockpit Racing The RD configuration includes electronic ear cups and drink-tube routing for clean, reliable comms and hydration in noisy, high-heat cabins. Internal channels manage airflow across the crown and face, and the shell profile is tuned for stability with optional aero accessories. Bell GT6 RD Carbon-4C Helmet Details Manufacturer: Bell Helmets Construction: lightweight 4C carbon-composite shell Configuration: RD (integrated electronic ear cups and hydration routing) Interior: fire-resistant comfort liner Orientation: closed-cockpit optimized, wide eyeport Hardware: factory-installed M6 HNR terminals Finish: gloss carbon-composite Shield: clear shield installed (tinted/iridium options available separately) Key Features Ultra-light carbon shell for reduced fatigue and quick head-turn response Multi-density, multi-piece liner for impact energy management Integrated channels for radio wiring and drink-tube routing Wide eye port for enhanced lateral vision in GT cars Efficient intake/extraction paths to promote airflow in warm cabins Compatible with optional top-forced-air and aero kits (rear spoiler, gurneys) Sealed eye port gasket to help reduce dust and moisture ingress Bell GT6 RD Carbon-4C Helmet FAQs What does “RD” mean on this model?RD indicates the helmet is set up for radio communications and drink-tube routing, with electronic ear cups installed for improved audio clarity. Is this helmet optimized for closed-cockpit use?Yes. The GT6 platform is tailored for GT and closed-cockpit cars, with a wide eyeport for peripheral vision and venting tuned for in-car airflow. Can I connect a top forced-air system?Yes. The shell accepts optional top forced-air kits, allowing you to feed cooled air into the helmet for longer stints and hotter events. Are hydration and radio systems included?The RD configuration provides integrated routing and ear cups; specific drink and radio hardware is typically added to suit your team’s setup. Does it include HNR anchor points?Yes. Factory-installed M6 HNR terminals are fitted for head-and-neck restraint compatibility. Which shield options are available?A clear shield is installed. Tinted and iridium options are available separately to suit lighting conditions and driver preference. Lightweight carbon construction, integrated comms/hydration, and closed-cockpit visibility make the Bell GT6 RD Carbon-4C a smart upgrade for serious GT drivers. Order yours from Competition Motorsport and get race-ready support.

Bell RS7 Carbon Fiber SA2025 Racing Helmet This is a pre-order, shipping after Q3 2025. The Bell RS7 Carbon Fiber SA2025 takes its design straight from the flagship Bell HP7, delivering pro-level performance at a more accessible price point. Built with Bell’s proprietary high-pressure molding process, this ultra-light carbon fiber helmet offers maximum strength, acoustic comfort, and aerodynamic efficiency. With 14 intake and exhaust channels, the RS7 ensures cool air flows in while hot air is pushed out, keeping you focused on the race. A hollow rubber gasket keeps air, water, and dust out, making it the perfect choice for demanding track environments. Bell RS7 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Manufacturer Part Number: 1204A Homologation: Snell SA2025 Sizes: 54cm to 61+cm Interior: Grey Comfort-Max FR® moisture-wicking fabric Shield: Clear SE07 3mm DSAF shield with anti-fog insert Included: M6 HNR terminals and hex wrench Notable Features 14 intake and exhaust channels provide maximum ventilation Multi-piece, multi-density liner for superior impact absorption at all speeds Aerodynamic stability at high speeds with optional chin bar, top Gurneys, and rear spoiler Optional top forced-air kits available: eyeport, 8-hole, and 10-hole configurations Integrated channels support drink tube and radio communication systems Pro-style foam interior with contoured cheek pads for a custom race fit Narrow eye port for reduced glare and enhanced safety in open-track conditions What’s In The Box Bell RS7 Carbon Fiber SA2025 helmet Clear SE07 3mm DSAF shield (installed) M6 HNR terminals Hex wrench key Bell RS7 Carbon Fiber Helmet FAQs Is the Bell RS7 Carbon Fiber helmet Snell approved? Yes, it carries the Snell SA2025 homologation, making it legal for track days, club racing, and sanctioned events across North America. What makes the RS7 different from the Bell HP7? The RS7 uses the same design as the HP7 but is homologated to Snell SA2025 instead of FIA 8860. It delivers top-level performance at a more affordable price point. Can this helmet integrate with a drink tube and comms system? Yes, the RS7 has built-in channels for hydration and radio communication systems, ideal for endurance or pro-level racing. Does the RS7 come with forced-air capability? The helmet includes top forced-air intake inserts that can be customized with optional eyeport, 8-hole, or 10-hole kits for external cooling systems. Step up to the Bell RS7 Carbon Fiber SA2025 Helmet and experience lightweight strength, pro-level aerodynamics, and advanced ventilation designed for serious racers.

Bell GT6 Carbon Fiber Auto Racing Helmet FIA8859-2024/SA2025 This is a pre-order, shipping after Q3 2025. The Bell GT6 Carbon Fiber Helmet brings modern design, lightweight protection, and advanced safety certification together for serious closed-cockpit racers. Inspired by the top-tier HP6, the GT6 Carbon combines a sleek carbon shell with a wide eye port, customizable ventilation, and optional communication integration for drivers who demand peak performance and comfort. Discover the Bell GT6 Carbon Fiber Helmet – Your Competitive Edge Built to the latest FIA8859-2024 and Snell SA2025 standards, the Bell GT6 Carbon is designed for endurance, GT, and touring car drivers. Its lightweight carbon construction enhances strength without sacrificing comfort, while multiple cooling and communication options make it a versatile tool for long stints behind the wheel. Whether you’re chasing podiums or logging training laps, this helmet ensures maximum focus and protection. Features • FIA8859-2024 and Snell SA2025 approved• Lightweight carbon-composite shell with gloss finish• Wide eye port for superior visibility in closed-cockpit racing• Multi-density liner for maximum energy absorption and impact performance• Direct-flow chin and extraction vents for excellent ventilation• Compatible with optional top- and side-air intakes• Integrated channels for drink tube and radio system installation• Optional ear cups available for improved noise insulation• Interior finished in dark grey FR fabric (other colors available special order)• Factory-installed HANS® anchors for head-and-neck restraint systems• Compatible with Bell SE06 3mm DSAF shield system• Includes tear-off posts and hex wrench Bell GT6 Carbon Fiber Helmet FAQs: What certifications does the Bell GT6 Carbon have? The helmet meets both FIA8859-2024 and Snell SA2025 standards, making it approved for use in major series worldwide. Can I connect a cooling system to this helmet? Yes, the GT6 Carbon can be paired with optional top- and side-air intakes and external cooling systems for endurance use. What comes in the box? The package includes the helmet, a clear SE06 shield (installed), tear-off posts, a hex wrench, and a Bell drawstring helmet sack. Is this helmet compatible with HANS devices? Yes, it comes with factory-installed M6 threaded HANS anchors ready for use with your device. Lightweight, strong, and engineered for closed-cockpit racing, the Bell GT6 Carbon FIA8859-2024/SA2025 helmet is a trusted choice for competitive drivers. Order today and upgrade your racing safety with one of Bell’s finest designs.

Bell MAG-10 Rally Carbon Fiber Helmet  Expected ETA: November 2025 The Bell MAG-10 Rally Carbon is a premium open-face helmet engineered specifically for rally drivers who demand lightweight performance, maximum ventilation, and seamless integration with communication systems. Certified to the Snell SA2025 standard, this helmet blends modern carbon fiber construction with cutting-edge features to keep you cool, comfortable, and fully connected during high-intensity rally stages. Lightweight carbon fiber shell, built for rally Features • Ultra-lightweight carbon fiber composite shell for superior strength-to-weight ratio •FIA8859-2024 Snell SA2025 approved for auto racing and rally use • Advanced multi-density liner for optimal impact absorption and protection • Adjustable high-efficiency ventilation system designed for rally environments • Integrated ZeroNoise® electronics with high-quality speakers and noise-canceling microphone • Compatible with common intercom systems used in professional rallying • Open-face design optimized for communication, comfort, and cooling • Adjustable sun peak with anti-dazzle strip for better visibility in changing light conditions • Removable and replaceable cheek pads and liner for easy cleaning and a custom fit • Pre-installed Hans® anchor points for head and neck restraint compatibility Bell Helmet Chart Why choose the Bell MAG-10 Rally Carbon? Developed for rally drivers and co-drivers, the MAG-10 Rally Carbon delivers best-in-class communication, cooling, and safety in a lightweight carbon package. Its integrated intercom system and precision ventilation make it a favorite among professionals competing in demanding environments where clarity and endurance are critical. If you’re looking for the perfect balance of comfort, performance, and connectivity, this helmet sets the standard. Bell MAG-10 Rally Carbon Fiber Helmet FAQs: Does the helmet include built-in communications? Yes, it comes with factory-installed ZeroNoise® electronics, including speakers and a noise-canceling microphone, compatible with most intercom systems. What makes the carbon fiber version different? The carbon shell reduces overall weight while increasing strength, providing less neck fatigue during long rally stages. Is it compatible with Hans devices? Yes, Hans® anchor points are factory-installed, ensuring compliance with modern safety systems. Who is this helmet best for? Rally drivers and co-drivers who need lightweight protection, premium comfort, and high-quality communication in a professional motorsport environment. Step up to the Bell MAG-10 Rally Carbon Fiber Helmet FIA8859-2024/SA2025 and experience the ultimate in rally-ready performance, communication, and safety. Order today and get race-proven protection for your next   

Bell XR7 Carbon FIA8859-2024/SA2025 Helmet This is a pre-order, shipping after Q3 2025. The Bell XR7 Carbon is built for serious track work: featherweight strength, crisp visibility, and cooling that actually keeps up during long sessions. With dual certification to FIA 8859-2024 and Snell SA2025, it checks the boxes for club, pro-am, and many pro-level series while keeping comfort and focus front and center. Dual-certified carbon performance for race-day confidence Features Carbon fiber shell engineered for high impact energy management while minimizing weight for reduced neck fatigue on long stints Dual homologation: FIA 8859-2024 and Snell SA2025 for broad series acceptance in the U.S. and internationally Refined aerodynamics help stabilize the helmet at speed and reduce lift and turbulence in open- and closed-cockpit cars Multi-channel ventilation promotes steady airflow to manage heat and visor fog in hot, humid conditions SE07 DSAF clear shield included for durable anti-fog performance and wide, distortion-free field of view Hydration and radio ready with ports designed for clean installs and quick pit-lane connections Removable, replaceable interior padding to dial in fit and keep things fresh through the season Bell XR7 Carbon FIA8859-2024/SA2025 Helmet FAQs When will the Bell XR7 Carbon be available? Delivery timelines vary by size and finish; pre-order to secure earliest allocation for the upcoming season. Is the XR7 Carbon legal for FIA events? The FIA 8859-2024 approval covers many international series; always confirm with your sanctioning body and rulebook. How does the XR7 compare to RS7 and X7D models? XR7 targets a lightweight, dual-certified spec with race-day ventilation and stability; RS7 and X7D occupy adjacent weight/feature positions depending on series needs. Can I add hydration and comms? Yes. The shell and liner are designed for tidy hydration tube routing and radio kit integration without compromising fit. Step into the grid with a helmet that blends modern certifications, low weight, and track-proven cooling. Reserve yours to be ready for the season opener.

Bell X7D Carbon FIA8859-2024/SA2025 Helmet This is a pre-order, shipping after Q3 2025. The Bell X7D Carbon FIA8859-2024/SA2025 is a brand-new professional-level helmet engineered for drivers who demand uncompromising safety, lightweight strength, and advanced comfort. Certified to both the FIA 8859-2024 and Snell SA2025 standards, it’s built for everything from pro-level competition to track days where cutting-edge gear makes the difference. Dual certification with advanced carbon construction Features Ultra-lightweight carbon fiber shell built using Bell’s high-pressure molding process Dual homologation: FIA 8859-2024 and Snell SA2025 for maximum acceptance worldwide Refined aerodynamic shape reduces lift and drag at high speed 14-channel ventilation system delivers superior airflow and cooling Pre-installed HANS anchors and hydration/communication system compatibility SE07 DSAF anti-fog visor included for clear visibility in all conditions Interior optimized for noise reduction and long-duration comfort Bell X7D Carbon FIA8859-2024/SA2025 Helmet FAQs What makes the Bell X7D Carbon unique? The X7D combines a carbon shell with dual FIA and Snell certification, making it versatile for international racing series and domestic events. Is this helmet legal for FIA-sanctioned racing? Yes, the FIA 8859-2024 approval ensures it’s eligible for many international racing categories, while the SA2025 certification covers U.S. competition. Can I use hydration and radio systems with the X7D? Absolutely. The helmet is designed for seamless integration of hydration tubes and radio communication equipment. How does it compare to the Bell RS7 Carbon? The X7D is positioned as a next-generation carbon helmet with updated FIA certification, offering broader acceptance for pro-level competition. Step up to the Bell X7D Carbon FIA8859-2024/SA2025 and race with a helmet that meets the highest safety standards while keeping weight to a minimum.

Bell RS7C LTWT Carbon Fiber Helmet SA2020 Cutting-Edge Protection in a Lightweight Package Based on the design of the range-topping Bell HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The Bell RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet. Bell RS7C LTWT Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 1237A Certification: Snell SA2020 Construction: aerospace grade ultra-light carbon fiber shell Color: carbon matte clear Shield: Bell 3mm SE07 Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF) Sizes: 54cm to 61cm+ HANS anchors: factory installed Ear cups: included Pivot kit: SV(SE07, SE077) Bell RS7C LTWT Additional Features: Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fitment system with or without included ear cups Top and chin bar ventilation system with 14 intake and extraction channels Interior ventilation channels maximize air flow Shell and shield optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top gurney and chin-bar gurney available separately Top air attachments available separately Additional Bell RS7C LTWT Carbon Fiber helmet shields available here

Bell BR8 Carbon Fiber Auto Racing Helmet SA2025 This is a pre-order, shipping after Q3 2025. The Bell BR8 Carbon is a versatile, ultra-light helmet built for off-road and dirt track racing. Its configurable forced-air system lets you run standard, left or right side-air, left or right three-quarter top-air, or top-air using the included kit. One helmet, multiple setups—tune cooling and cockpit integration without changing models. Ultimate Performance, Unmatched Safety and Versatility An aerodynamic front duckbill improves high-speed stability. A Double Screen Anti-Fog (DSAF) insert maintains a positive, fog-resistant visor seal across changing conditions. Rear-facing venturi vents help block dust and debris while still allowing forced air to flow freely. A unique internal air-chamber system distributes airflow evenly around the head, and the BR8 can be used with or without ear cups. Bell BR8 Carbon SA2025 Helmet Details Manufacturer: Bell Helmets Manufacturer part no.: 1238B Construction: lightweight carbon fiber shell Interior: dark grey fire-resistant fabric Homologation: FIA 8859-2015 and Snell SA2025 Finish: gloss carbon fiber Front duckbill: included Sizes: 57 cm (7 1/8) to 61 cm+ (7 5/8+) Shield (clear included): Bell SRV-8 Shield pivot kit: Bell SRV-1 Key Features Configurable forced-air with included kit: standard, left/right side-air, left/right three-quarter top-air, or top-air DSAF visor insert for a positive, fog-resistant seal and clear vision Rear-facing venturi vents help keep dust out while maintaining airflow Internal air-chamber system distributes cooling evenly around the head Integrated channels for optional drink tube and radio systems Advanced multi-density, multi-piece liner for energy absorption and impact performance Multi-purpose fit system; use with or without included ear cups Interior ventilation channels maximize airflow and comfort Synthetic rubber eyeport gasket helps prevent dirt and water ingress Bell BR8 Carbon Fiber Helmet FAQs What makes the BR8 Carbon ideal for dirt and off-road?Its rear-facing venturi vents and sealed DSAF visor help manage dust while the configurable forced-air system keeps fresh air flowing in harsh conditions. Which air configuration should I choose?Select based on cockpit packaging and comfort: side-air for direct flow to the face, three-quarter top-air for visor and crown cooling, or full top-air for evenly distributed cooling. Is the BR8 Carbon compatible with drink and radio systems?Yes. Built-in channels support hydration tubes and radio cabling for endurance and off-road events. What certifications does this helmet carry?It meets FIA 8859-2015 and Snell SA2025, making it suitable for a wide range of auto racing series. Always confirm event-specific rules. Can I use ear cups with this helmet?Yes. The BR8 can be worn with or without ear cups to tailor comfort, noise control, and comms fit. How does the DSAF system help visibility?The Double Screen Anti-Fog insert maintains a positive seal to reduce fogging and keep the visor clear in variable temperatures and dusty environments. Get configurable cooling, advanced dust management, and carbon-shell performance in one model. Pre-order the Bell BR8 Carbon and be ready for the green flag.

Bell MAG-10 Carbon Fiber Helmet This is a pre-order, shipping after Q3 2025. The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing. Carbon Performance with Open-Face Visibility The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions. Helmet Details Manufacturer: Bell Helmets Construction: lightweight carbon fiber shell Orientation: open-face with long clear visor Homologation: FIA 8859-2024 and Snell SA2025 Hardware: factory-installed M6 HNR terminals Comms/Hydration: routing-ready (components optional) Finish: gloss carbon Bell MAG-10 Carbon Fiber Helmet Key Features Open-face carbon design for low weight and wide, unobstructed vision Multi-density, multi-piece liner for impact energy management Long clear visor with anti-fog-ready compatibility and broad coverage Ventilation paths promote airflow for heat management in closed cabins Routing-ready for radio microphone, speakers, and hydration tube (optional kits) Factory M6 terminals for head-and-neck restraint systems Interior uses fire-resistant comfort fabrics for durability and easy care Bell MAG-10 Carbon Fiber Helmet FAQs Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules. Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs. Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility. Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup. What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference. Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably. Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence. This helmet will ship with signature required for delivery.

Bell RS7-K Carbon Fiber Karting Helmet This is a pre-order, shipping after Q3 2025. Push your karting performance with the Bell RS7-K Carbon, combining an ultra-light carbon shell, Formula-derived aerodynamics, and class-leading visibility and cooling. Purpose-built from the RS7 platform and inspired by the HP7, it delivers confidence for competitive kart racers at every level. FIA8878-2024/K2025 certified for karting, the RS7-K uses a recessed SE07 DSAF shield for clear vision and stability, an expansive eyeport for awareness, and a 14-channel ventilation system to keep you cool under pressure. Lightweight, sleek, and proven on track, it’s a top choice for serious karters. Based on the RS7C LTWT developed with Penske Racing, the RS7-K Carbon comes in under 2.75 lb race-ready. Its recessed shield improves aero and acoustic performance while the modern shell profile and optimized fit deliver comfort over long sessions. Key Features Aerospace-grade carbon fiber shell FIA8878-2024/K2025 karting certification Multi-density, multi-piece energy-absorbing liner Can be worn with or without included ear cups SE07 3 mm DSAF visor for anti-fog clarity — buy visor here Advanced 14-channel ventilation for maximum airflow Recessed shield/shell interface for reduced wind noise and better aero Optional accessories: rear spoiler, top gurney, chin bar gurney Non-fireproof, durable interior for kart-specific use Not compatible with head-and-neck restraint anchors Rubber gasket helps seal out dust and water Shield and pivot compatibility: SE07 3 mm, SV (SE07, SE077) Interior colors by special order: Black, Blue, Green, Red, Tan, Violet, White, Yellow Finish: Carbon Gloss Clear Sizes: 54 cm to 61 cm+ Bell RS7-K Helmet Sizing Chart Why Buy Here Authorized source for genuine Bell, expert fitment guidance, and fast shipping. Track-savvy support for kart racers, online or at the circuit. Bell RS7-K Carbon Fiber Karting Helmet FAQs What is the best helmet for kart racing? The RS7-K Carbon is widely regarded as a top performer thanks to its carbon shell, FIA8878-2024/K2025 certification, and advanced cooling and optics. How should I choose the right size? Measure around your head above the brows and compare to Bell’s chart. If between sizes, choose the snug fit that seats evenly around the crown and cheeks. What safety standard applies to karting?FIA8878-2024/K2025 is designed specifically for karting competition and is accepted by most series. DOT is for street use and is not a karting spec. Can I use a motorcycle helmet for karting?No. Use a motorsport karting helmet that meets FIA8878-2024/K2025 and provides kart-tuned ventilation and impact performance. How often should I replace my helmet?Follow manufacturer guidance; replace after any significant impact, visible damage, liner breakdown, or roughly every five years of regular use. How do I prevent visor fogging?Use Bell’s DSAF visor or an approved anti-fog insert and keep vents open. Avoid touching the inner anti-fog surface. Can I wear glasses with this helmet?Yes. The wide eyeport and liner shape accommodate most eyewear; ensure temples don’t create pressure points. Ready to race with clearer vision, lower weight, and better cooling? Order the Bell RS7-K Carbon and step up your karting program.

Bell KC7 CMR Ultra-Light Carbon Fiber Karting Helmet Introducing the Bell KC7 CMR Carbon—the first ultra-lightweight carbon fiber youth karting helmet designed for the next generation of champions. Based on Bell’s iconic HP7 Formula 1 helmet, the KC7 CMR features a sleek aerodynamic shell, 14-channel ventilation system for maximum airflow, and a Double Screen Anti-Fog (DSAF) visor to ensure crystal-clear visibility even in rainy conditions. Designed specifically for drivers under 18, the KC7 is certified to the FIA/Snell CMR2016 standard, offering race-winning safety with reduced weight to minimize neck strain. Its carbon shell construction, precision fit, and pro-level comfort make it a top-tier choice for youth karting athletes. When only the best will do, trust the KC7 CMR Carbon to protect your young driver on their path to the podium. Whether your racer is just entering the sport or competing on the national stage, the KC7 delivers advanced protection, reduced fatigue, and unmatched quality. The KC7 is one of the best youth karting helmets available today—lightweight, breathable, and engineered for performance. Shop now at Competition Motorsport, your trusted source for Bell kart racing helmets and elite motorsports safety gear. Bell KC7 CMR Carbon Helmet Features Ultra-lightweight carbon fiber shell – weighs just 2.6 lbs (sizes 52-56) and 2.7 lbs (sizes 57-59) Advanced HP7 design adapted for karting with aerodynamic performance and energy absorption 14 intake and extraction vents for maximum airflow and driver cooling High-performance Double Screen Anti-Fog (DSAF) visor system with SE07 2mm shield and SV pivot Moisture-wicking, pro-style multi-density interior with replaceable cheek pads Multi-density, multi-piece custom bead liner for optimized impact protection Hollow synthetic rubber gasket seal prevents dust, air, and water intrusion Comfort-Plus karting interior for professional fit and all-day wearability Optional accessories available: chin bar gurney, top gurney, rear spoiler (sold separately) Drawstring helmet bag and hex wrench included Homologation: FIA/Snell CMR2016 certified This helmet ships with adult signature required for delivery Bell KC7 CMR Helmet Size Chart Why Choose the Bell KC7 CMR from Competition Motorsport? As an authorized Bell dealer, Competition Motorsport offers fast shipping, expert sizing assistance, and exclusive helmet accessories. Our team is made up of real racers who know how important the right gear is to your success and safety on track. Order Now & Equip Your Young Racer with the Best The Bell KC7 CMR Carbon Fiber Karting Helmet is the gold standard for youth karting safety. Lightweight, breathable, and race-tested—this helmet is trusted by future champions worldwide. Order today from Competition Motorsport and experience the performance advantage for yourself. Bell Kart Racing Helmets – Frequently Asked Questions (FAQ) Safety is the top priority in kart racing, and selecting the right helmet is critical for your performance and protection. Whether you're a first-time buyer or upgrading to a premium model, the experts at Competition Motorsport are here to help. Read below for answers to the most frequently asked questions about Bell kart helmets. General Helmet Questions What is the best helmet for kart racing?The Bell KC7 CMR Carbon Fiber Karting Helmet is widely regarded as one of the best karting helmets available. It features a lightweight carbon shell, Snell K2020 certification, and race-proven performance trusted by competitive drivers worldwide. Why do I need a kart racing helmet?A certified kart helmet protects you from high-speed impacts, flying debris, and (in some motorsports) fire hazards. It’s your most important piece of safety gear on the track. How do I choose the right helmet size?Use a flexible tape to measure your head circumference just above your eyebrows and ears. Compare your measurement to Bell’s sizing chart. A proper fit ensures maximum safety and comfort. What certifications should I look for?For karting, look for the Snell K2020 certification, the most widely accepted helmet standard for youth and adult kart racers. Avoid street-use-only (DOT) helmets. Can I use a motorcycle helmet for kart racing?No. Motorcycle helmets are not designed for karting and lack kart-specific safety certifications, airflow design, and impact zones optimized for motorsports. How often should I replace my helmet?Replace your helmet every 5 years or sooner if it shows signs of damage, wear, or has been involved in an impact. Even if unused, materials degrade over time. Are expensive helmets safer than budget ones?Yes. While all certified helmets meet minimum safety requirements, premium helmets offer better materials, lighter weight, enhanced aerodynamics, and more comfort—key factors in long, competitive race days. Helmet Usage & Maintenance How do I clean and maintain my helmet?Use a helmet-specific cleaner like the Molecule Care Kit. Avoid submerging the helmet in water or using abrasive cleaners. Clean the visor with a soft microfiber cloth. Should I wear a balaclava under my helmet?Yes. A balaclava adds comfort, protects your helmet lining from sweat, and makes it easier to take on and off. Fire-rated balaclavas are recommended for high-performance karting and required in auto racing. Can I wear glasses with a Bell helmet?Yes. Bell helmets feature wide eyeports that accommodate most prescription glasses and racing eyewear comfortably. Are carbon fiber helmets better?Carbon fiber helmets are lighter, stronger, and more comfortable during long sessions. They reduce neck fatigue and provide exceptional impact protection. Can I use a used helmet?It’s not recommended. Hidden damage or age-related material breakdown could compromise protection. Always buy new from a trusted dealer like Competition Motorsport. Performance & Accessory Tips How do I prevent helmet fogging?Use a helmet with anti-fog visors like Bell’s DSAF system, or apply anti-fog spray or inserts. Keeping your helmet well-ventilated also helps prevent fog buildup. Why is ventilation important?Good ventilation reduces heat buildup and moisture, helping you stay cool, focused, and fatigue-free during long sessions. How should I store my helmet between races?Keep it in a padded helmet bag, like our Evo Helmet Bag, and store in a cool, dry location away from sunlight and chemicals. Certifications & Compatibility What's the difference between Snell K2020 and CMR2016?Snell K2020 is for adult karting helmets. CMR2016 is designed for drivers under 15 and offers lighter weight to reduce neck fatigue while still meeting strict safety standards. Are tear-off visors necessary?Yes. Tear-offs keep your visor clean during races by allowing you to peel off a dirty layer. They’re especially helpful in outdoor racing conditions with dirt, water, or oil on the track. How do I know if my helmet is still safe?Inspect your helmet regularly for cracks, fading, or loose components. If it’s older than 5 years or has been in an impact, replace it immediately—even if it looks fine. Can I customize my Bell helmet?Yes. Bell offers multiple color linings, spoiler kits, and visors. Just ensure you don’t drill or alter the helmet shell, as it will void certifications and compromise safety. Where can I buy a certified Bell helmet?From the pros at Competition Motorsport. We carry the full line of Bell karting helmets and accessories, ship fast, and support racers at trackside events across the country. Don't Compromise on Safety. Choose Bell. Whether you're a parent buying for a future champion or a racer climbing the competitive ladder, Bell Kart Racing Helmets deliver world-class performance, fit, and protection. Shop our full lineup right here at Competition Motorsport—the trusted name in motorsport safety gear. Bell Kart Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Kart Racing Helmet to suit your racing needs. Bell Kart Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Bell Race Helmet: Your Bell Race Helmet is more than just protective gear; it's a crucial part of your racing gear. The aerodynamic design of a Bell Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Racing Helmet: A Kart Racing helmet is a fundamental piece of safety gear for any racer. Bell's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to Kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.  

Bell GT6 RD-4C Titanium S Helmet FIA8859-2024 / SA2025 This is a pre-order, shipping after Q3 2025. The Bell GT6 RD-4C Titanium S is a premium racing helmet engineered for maximum safety, clarity, and comfort. Built with a lightweight carbon composite shell and dual certification to FIA8859-2024 and Snell SA2025 standards, it’s designed for drivers competing at the highest levels of motorsport. Elite performance with uncompromising protection Dual FIA and Snell certification Approved to both FIA8859-2024 and Snell SA2025, the GT6 RD-4C Titanium S meets the strictest global motorsport standards for professional competition. Lightweight carbon composite shell The advanced RD-4C carbon composite construction provides outstanding impact resistance while keeping the helmet light, reducing strain and fatigue during endurance sessions. Enhanced ventilation An optimized airflow system channels fresh air through upper and chin intake ports with rear exhausts, ensuring drivers stay cool and focused behind the wheel. Wide eyeport and SE06 anti-fog visor With its generous eyeport and standard SE06 double screen anti-fog visor, the GT6 RD-4C Titanium S delivers exceptional visibility and reliable clarity in every condition. Bell GT6 RD-4C Titanium S Helmet FAQs: What makes the RD-4C Titanium S different from other GT6 models? The RD-4C Titanium S features a specialized carbon composite shell designed for strength and reduced weight, along with premium fit and finish for pro-level performance. Is this helmet approved for international racing? Yes, with FIA8859-2024 and Snell SA2025 certifications, it is legal for use in most professional racing series worldwide. Does the helmet come HANS-ready? Yes, the GT6 RD-4C Titanium S is HANS-ready with pre-installed anchor points for all major head and neck restraint systems. What visor is included with the helmet? It comes with an SE06 double screen anti-fog visor for maximum clarity, even in challenging conditions. The Bell GT6 RD-4C Titanium S is the ultimate racing helmet for drivers seeking advanced protection, lightweight design, and professional-grade performance on track.

Bell Racing GT6 RD 4C/EC Auto Racing Helmet This is a pre-order, shipping after Q3 2025. IMSA Comms, Hydration, and ZeroNoise® in a Race-Ready Shell Built for serious endurance and GT drivers, the Bell Racing GT6 RD 4C/EC Helmet brings full comms and hydration integration into a track-ready shell without compromise. With its titanium finish, aggressive HP6-derived design, and wide eye port for visibility in tight cockpits, this is the helmet for those who treat every lap like a qualifying session. The GT6 RD 4C/EC is ready for IMSA communication and hydration systems right out of the box—because seconds count, even off the throttle. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). In the case of this Carbon-4C/EC model, the helmet is a Carbon Composite 4-layer shell with EC (electronic comms) kit integration. Features: Integrated IMSA Radio & Hydration System: Comes pre-installed with electronics and tubing for plug-and-play connection to your team’s radio and drink system. 4C/EC Carbon-Glass Composite Shell: Lightweight and high-strength, built from premium carbon-glass for optimal energy absorption and all-day wearability in long stints. ZeroNoise® Advanced Electronics: Equipped with high-power speakers, a noise-canceling microphone, and superior sound insulation for crisp in-car communication even in loud environments. Wide Eyeport: Offers exceptional lateral and vertical visibility, ideal for closed-cockpit racing where every degree of vision matters. Track-Proven Ventilation: Strategically placed intake ports can be connected to cooling systems for maximum airflow in hot race conditions. Standards: Dual certified to FIA8859-2024 and Snell SA2025 for maximum track-day and competition eligibility. Bell Racing GT6 RD Carbon 4C/EC Helmet FAQs: What’s the difference between the GT6 and the GT6 RD? The GT6 RD includes factory-installed IMSA radio comms and hydration ports, while the standard GT6 does not. Is this compatible with ear buds or over-ear speakers? Yes, the 4C version supports both ear cups and ear buds depending on your personal or team setup. Uses IMSA connections. What is ZeroNoise® and why does it matter? ZeroNoise® is Bell's advanced audio platform, engineered for crystal-clear in-car communication with minimal distortion and maximum driver focus. Can I use this helmet for endurance racing? Absolutely. With comms, hydration, and a lightweight carbon-glass shell, it's made for long hours in the car at high intensity. The Bell GT6 RD 4C is the pro’s choice when comfort, comms, and clarity matter most. From sprint races to 24-hour stints, this helmet brings together titanium-level fit, cutting-edge audio, and pure performance.

Bell M.8 Carbon Fiber Helmet FIA8859-2024/SA2025 This is a pre-order, shipping after Q3 2025. The Bell M.8 Carbon Fiber FIA8859-2024/SA2025 helmet is purpose-built for comfort while retaining the classic Bell M design that racers trust. With its oversized eye port and adjustable forehead ventilation, this helmet is ideal for drivers who need to wear sunglasses or prescription glasses while maintaining peak visibility and comfort on track. Premium Carbon Construction, Modern Safety Standards Handcrafted from lightweight carbon fiber, the Bell M.8 Carbon meets the newest FIA8859-2024 and Snell SA2025 standards. Its balance of protection, fit, and ventilation makes it a go-to choice for racers in endurance, open-track, and competitive series. Whether you’re logging hours at an HPDE or battling wheel-to-wheel, the M.8 delivers race-day confidence without compromise. Features • FIA8859-2024 and Snell SA2025 approved• Lightweight carbon fiber shell (Size M = 2.9 lbs / 1.3 kg)• High-pressure molded shell for maximum strength• Multi-piece, multi-density liner for superior energy absorption• Direct-flow chin vents and forehead air intakes for customizable cooling• Integrated channels for drink tube and radio system use• Black Comfort-Plus FR interior for moisture-wicking comfort• Large eye port optimized for eyeglass wearers• Hollow synthetic rubber gasket keeps out dust, dirt, and water• Includes clear SRV-8 3mm shield with SRV-1 pivot system• M6 threaded inserts for HANS® anchors (sold separately)• Delivered with visor hardware, hex wrench, and helmet bag Bell M.8 Carbon Fiber Helmet FAQs: Is the Bell M.8 Carbon certified for racing? Yes, it is homologated to FIA8859-2024 and Snell SA2025 standards, making it legal for most major racing organizations worldwide. Can I wear glasses with the Bell M.8 Carbon? Absolutely. The oversized eye port is specifically designed for drivers who need sunglasses or prescription eyewear. What comes in the box? Each helmet includes a clear SRV-8 shield, visor strip, hardware kit with hex wrench, and a Bell helmet bag. Is it compatible with HANS devices? Yes, the helmet has factory-installed M6 threaded inserts for HANS posts (sold separately). Step into the cockpit with confidence. The Bell M.8 Carbon FIA8859-2024/SA2025 delivers lightweight strength, incredible comfort, and proven race-ready safety. Order yours today and experience the difference a top-tier Bell helmet makes on track.