all

Recaro Classic LS Seat The Optimum Seat for a Long, Winding Road If you enjoy the thrill of pushing that extra little bit through the twists and turns in the road, you need seats that offer exceptional lateral support. But you can't sacrifice comfort and style to get it. In which case, the Recaro Classic LS seat is made just for you. The Recaro Classic LS has substantial, sporty side bolsters in the backrest, giving you the safe support you need for driving round corners at speed. The paddable lumbar support and adjustable seat depth help to relieve muscle strain and let you dial in further sportiness without ever sacrificing the comfort you need on those long ribbons of highway. Built by Recaro's renowned craftsmen, the Classic LS can be upholstered in your choice of four luxurious combinations: Black Leather/Pepita Fabric Black Leather/Checkered Fabric Black Leather/Corduroy Full Black Leather No matter your choice, the resplendent style and select materials of your Classic LS seat make it a timeless investment. Recaro Classic LS Seat Features Side bolsters in the backrest for excellent control during spirited driving Lumbar support can be adjusted with various padding Backrest folds further forward for easy access to the rear seats Individual seat depth adjustment (18.8 - 20.8 in. / 480 - 530 mm) Seat rib upholstery helps optimize body fit Fully upholstered headrests are standard Backrest adjusters and front-folding mechanisms on both sides of the seat Use the dropdown above to add the Recaro 0.70.9NT seat slider seen here Recaro Classic LS Specifications Weight: Approximately 55 lbs. of pure Recaro support, comfort, and style. Materials: Supple black leather combined with Recaro's premium proprietary fabrics. Dimensions: Check the graphic below, because size does matter. Made in Germany: Precision engineering at its finest. Recaro Classic LS FAQs Q: Will it fit in my vintage/classic car? A: With its timeless design and modern engineering, the Recaro Classic LS seat is most at home in vintage and classic cars. But if you're not sure, let's chat specifics so we get everything right. Q: Is it comfortable for daily driving? A: Don't let the sporty bolstering fool you, this is a supremely comfortable seat for both around-town errands and long, winding journeys. Q: Can I install it myself? A: If you can turn a wrench, you can handle installing the Recaro Classic LS. However, when in doubt, professional installation is never a bad idea.

CMS Performance Ultimate Race Seat Mounting Kit This Kit Fits the Following Vehicles: BMW G82 M4 (2021+) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Motorsports Enthusiasts! Are you a racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your BMW on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your BMW. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineered for BMW Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your BMW. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped BMWs. Let CMS Performance help you unlock the full potential of your high-performance BMW on the race track. Custom Powder Coat to Match Your BMW The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable satin black finish powder coat. CMS Performance can also custom powder-coat your kit in just about any BMW OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the BMW color you want in your Order Notes at check-out.1 See Assembly Instructions Here CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory BMW seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Optional: high-performance race seat slider Detailed installation instructions Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your BMW. CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your BMW. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors.1 Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Ultimate Race Seat Mounting Kit is engineered for straightforward installation and precise fitment. Complete The Race Day Package: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider. 1 The Recaro seat slider can not be powder coated and comes only in satin black.

Molecule Wash & Refresh Athletic Kit Molecule Nomex Suit Wash safely and effectively cleans Nomex fire-resistant fabric (and other technical fabrics) in standard washing machines. Molecule is specifically formulated to maintain the fire-resistant properties of your Nomex racing gear, wash after wash, without leaving any performance-robbing residues that can be left behind by ordinary laundry detergents. Product Features Manufacturer: Molecule Labs Manufacturer part number: MSAK442 (4 oz.) Manufacturer part number: MSAK161 (16 oz.)

SilverRocket Dry Carbon Fiber Tailgate Support Reinforcement Applications: Porsche 718 (all models) Porsche 981 (all models) Eliminate Metal Dents With High-Downforce AOA Or Large Wings When we run our Porsche 718 GT4 RS with high downforce Angle-Of-Attack (AOA) settings on high-speed tracks, or when using high-downforce motorsport wings, the potential for metal dents in the sheet metal supporting the tailgate increases. For instance, the SilverRocket DRS-1 wing can generate over 550 lbs. of downforce at 200 mph. This substantial downforce is directed through the wing supports into the car's body at two points beneath the tailgate. There is a risk that high downforce could cause dents in the metal at these support points. SilverRocket Dry Carbon Fiber Wing Support Plates Highlights Benefit: Eliminates the risk of metal dents with high-downforce AOA settings and/or bigger rear wings Materials: Crafted from 100% aerospace-grade dry carbon fiber, twice the strength of steel Installation: Pre-fitted with 3M VHB tape for quick and easy installation in just 30 seconds

Stilo to Sentry Adapter Cable This cable will connect the female comms port on your Stilo GT-style helmet to your Sentry or similar Race Reciever.  Includes 3.5mm (1/8") connector (pinned for listening only) on one end and Stilo male 4C connector on the other. Made in the USA from thin, flexible, ROHS-compliant cable. Cable Details Manufacturer: Trac-Com Manufacturer part no.: R AD STILO2SENTRY36 Stilo 4C 1/4" male to Sentry 3C 1/8" (3.5 mm) male Used for listening only – no mic channel on the Sentry plug

Stilo ST6 ABP Helmet Cheek Pads Easily customize the fit of your Stilo ST6 ABP! Replacement cheek pads for Stilo ST6 ABP helmets help you customize your helmet to provide the perfect fit! It's one of the features that makes Stilo helmets special – the ability to install thicker or thinner pads simply and seamlessly. These pads are only for ABP versions of the Stilo ST6 helmet.  If you have a non-ABP Stilo helmet, please order the version for non-ABP helmets. We will not accept returns on these items.

Sparco K-Prime Kart Racing Shoes The Sparco K-Prime Kart Racing Shoes are premium karting boots engineered for drivers who demand precise pedal control, lightweight comfort, and dependable protection. Developed with input from professional drivers, the K-Prime combines a smooth microfiber upper, an ultra-light rubber sole, and a supportive high-top design for competitive indoor and outdoor kart racing. The K-Prime was the first Sparco kart boot developed to meet the FIA 8877-2022 karting standard, which introduces increased protection requirements for modern karting footwear. Its advanced construction provides the mobility, grip, and durability needed by professional racers, club competitors, and developing drivers. A flexible rear ankle bellow supports the ankle while allowing unrestricted movement during braking and throttle operation. The shock-absorbing footbed helps isolate vibration from the kart chassis, reducing fatigue during long practice sessions, qualifying runs, and races. FIA 8877-2022 Karting Approval The Sparco K-Prime is homologated to the FIA 8877-2022 karting equipment standard. This certification makes it suitable for karting competitions that require footwear meeting the latest FIA protection requirements. Smooth Microfiber Upper The upper is constructed from smooth microfiber material selected for its balance of flexibility, durability, and lightweight performance. The material conforms comfortably around the foot while maintaining the support required for precise pedal operation. Breathable Karting Construction Strategically positioned ventilation areas help circulate air around the foot and reduce heat buildup. The breathable construction improves comfort during warm-weather races, indoor karting events, and extended track sessions. Elasticated Rear Ankle Bellow An elasticated bellow at the rear of the shoe allows the ankle to move naturally while maintaining support around the heel. This flexible design reduces restriction during braking, acceleration, and rapid transitions between the pedals. Shock-Absorbing Footbed The internal footbed helps absorb vibration transmitted through the pedals and kart chassis. Reducing shock and vibration can help limit foot fatigue and improve driver comfort over longer sessions. Ultra-Light Karting Sole The K-Prime uses an ultra-light rubber outsole designed specifically for kart racing. Different grip textures are positioned across the sole to provide an effective balance of pedal traction, flexibility, and sensitivity. Responsive Pedal Feel The low-profile outsole allows the driver to feel subtle changes in brake and throttle pressure. This responsive construction supports smooth pedal modulation and greater confidence when approaching braking zones and corner exits. Single-Strap Closure System A wide single-strap closure provides a secure fit around the upper foot and ankle. The simple closure design allows quick entry and removal while keeping the shoe firmly positioned during demanding driving conditions. Abrasion-Resistant Toe and Heel Protection Reinforced protection around the toe and heel improves resistance to wear from contact with pedals, the kart chassis, and paddock surfaces. These durable areas help extend the usable life of the shoe without adding unnecessary weight. Modern High-Performance Design The K-Prime combines technical materials with contemporary Sparco styling. Its streamlined profile and performance-oriented construction coordinate with modern kart racing suits while providing the control expected from Sparco’s premium karting footwear. Sparco K-Prime Kart Racing Shoe Features Premium kart racing shoe for competitive and club-level drivers FIA 8877-2022 homologated Smooth lightweight microfiber upper Breathable construction for improved airflow Elasticated rear ankle bellow Supportive high-top karting design Shock-absorbing internal footbed Helps reduce vibration and foot fatigue Ultra-light rubber karting outsole Multiple grip textures for traction and pedal sensitivity Responsive brake and throttle feedback Wide single-strap closure system Quick and secure fit adjustment Abrasion-resistant toe protection Reinforced heel area Suitable for indoor and outdoor kart racing Technical Specifications Product: Sparco K-Prime Kart Racing Shoes Manufacturer: Sparco Product Type: Kart racing shoes Upper Material: Smooth microfiber Rear Construction: Elasticated ankle bellow Closure: Single adjustable strap Footbed: Shock-absorbing anatomical insole Outsole: Ultra-light textured rubber karting sole Toe Protection: Abrasion-resistant reinforcement Heel Protection: Reinforced abrasion-resistant construction Certification: FIA 8877-2022 European Sizes: 36–48 Sparco K-Prime Kart Racing Shoe Size Chart Frequently Asked Questions Are the Sparco K-Prime Kart Racing Shoes FIA approved? Yes. The Sparco K-Prime is homologated to the FIA 8877-2022 karting standard. Drivers should confirm the current footwear requirements for their racing series, class, and event. What are the Sparco K-Prime shoes made from? The upper is constructed from smooth, lightweight microfiber material designed to provide flexibility, durability, and a secure performance fit. Do the Sparco K-Prime shoes provide good pedal feel? Yes. The ultra-light rubber outsole uses different grip textures to provide responsive pedal feedback while maintaining dependable traction on the brake and throttle pedals. What does the rear ankle bellow do? The elasticated rear bellow allows the ankle to move naturally during braking and acceleration while maintaining support around the heel. How does the shock-absorbing footbed improve comfort? The cushioned footbed helps isolate vibration transmitted through the pedals and kart chassis. This can reduce fatigue during longer practice sessions and races. Are the Sparco K-Prime shoes suitable for indoor karting? Yes. Their breathable upper, responsive sole, and secure fit make them suitable for indoor karting leagues, practice sessions, and competition. Can the Sparco K-Prime be used for outdoor kart racing? Yes. The durable microfiber construction, reinforced toe and heel areas, and high-grip sole make the K-Prime well suited to outdoor karting events. Are the Sparco K-Prime shoes fire resistant? No. The K-Prime is designed and homologated specifically for kart racing. It should not replace FIA 8856-2018 or SFI-approved fire-resistant footwear required for auto racing. Can the Sparco K-Prime be used for auto racing? The K-Prime is intended for karting. Drivers competing in auto racing events should use fire-resistant shoes approved to the standard required by their sanctioning organization. What sizes are available? The Sparco K-Prime is available in European sizes 36 through 48. Refer to the Sparco sizing chart before selecting a size. How should the Sparco K-Prime Kart Racing Shoes fit? The shoes should fit securely around the heel and midfoot without painful pressure points or restricted circulation. The ankle strap should feel supportive without limiting natural movement. How should the Sparco K-Prime shoes be cleaned? Clean the exterior using a damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, submerge them in water, or place them near direct heat. Premium Karting Comfort and Control The Sparco K-Prime Kart Racing Shoes combine lightweight microfiber, flexible ankle support, a shock-absorbing footbed, and an ultra-light high-grip outsole. Their FIA 8877-2022 homologation and driver-focused construction make them an excellent choice for serious kart racers seeking comfort, durability, and precise pedal control.

Stilo ST6 FN Carbon Fiber 8860-2018 Racing Helmet The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years Stilo has lead the way in racing helmet innovation, and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at ever level of auto racing. The ST6 carbon fiber helmet is one of the lightest helmets on the market. Featuring enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston martin F1 team, every feature of the ST6 including the track-tested aerodynamics and a cutting edge dual lock visor system, its designed to give racers a performance edge. The Brand New Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way including; 10% Lighter than Stilo ST5 26% More Airflow than Stilo ST5 11% More Visibility More Comfortable Liner and Cheek pads More Shell Sizes for Lower Weight Better Visor Construction for Durability and Ease of Care Higher Quality Visor Hardware for Increased Reliability Stilo ST6 FN 8860 Carbon Fiber Auto Racing Helmet Features Puro Tech - Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers or additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market. New Shell Size Options - ST6 FN Now offered in four shell sizes, the Stilo ST6 FN auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. Increased Airflow Design - by utilizing our key partnerships with Formula One teams we have redesigned our front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top channeling airflow through the EPS foam to reduce sweat and moisture to keep you performing at your best.   Increased Downward Visibility - with input from professional drivers around the globe, Stilo has increased the downward Field of view of the Stilo ST6 carbon fiber helmet creating a wider field of vision for greater awareness on the track.   Interior Comfort - New and improved, the Stilo ST6 carbon fiber helmet cheek padding is redesigned to enhance stability and increase comfort.   Injection Molded Visor - brand new high performance visors provide exceptional vision and are coated in a new high performance washable anti-fog treatment. Dual Visor Lock - pioneering the industry, this dual visor lock complies with FIA standards both in fully closed and ventilation positions.   Updated Visor Hardware - designed for easy installation and smoother activation, this visor hardware can be purchased in a variety of anodized finishes. Stilo ST6 FN Carbon Fiber 8860-2018 Racing Helmet Sizing Chart  Stilo ST6 FN 8860-2018 Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AG1R Homologation: FIA 8860-2018 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN 8860-2018 Carbon Fiber Helmet Questions & Answers What certification does the Stilo ST6 FN Carbon Fiber Helmet have?The Stilo ST6 FN is homologated to the FIA 8860-2018 helmet standard. What head shape is the Stilo ST6 FN designed for?The ST6 FN is designed around an intermediate oval head shape. How much lighter is the ST6 than the ST5?Stilo states that the ST6 platform is approximately 10% lighter than the previous ST5 generation. Does the ST6 have more ventilation than the ST5?Yes. The ST6 provides approximately 26% more airflow than the ST5 through redesigned front ventilation and top airflow channels. Does the Stilo ST6 FN provide more visibility?Yes. The ST6 provides approximately 11% more visibility than the ST5, including an increased downward field of view. How many shell sizes does the ST6 FN use?The ST6 FN platform uses four shell sizes to better match the external shell to the driver's head size and help reduce unnecessary weight and bulk. What is Stilo Puro technology?Puro is Stilo's carbon fiber manufacturing process designed to minimize unnecessary coatings and finishing materials, helping reduce helmet weight while maintaining the required structural performance. What type of visor does the ST6 FN use?The ST6 FN uses an injection-molded Stilo ST6 visor with a washable high-performance anti-fog treatment. What is the dual visor lock?The ST6 dual visor lock allows the visor to be securely positioned in both the fully closed and ventilation positions while meeting the applicable FIA requirements. Are ST5 shields compatible with the ST6 FN?No. The ST6 FN uses the redesigned Stilo ST6 visor and hardware system and requires compatible ST6 helmet shields. Does the ST6 FN include noise-attenuating earmuffs?Yes. Noise-attenuating earmuffs are included with the helmet. What is the difference between the ST6 FN and ST6 GT?The ST6 FN does not have the integrated side communication and hydration ports found on the ST6 GT. The FN is designed for racers who prefer a cleaner and more streamlined helmet configuration. What is the manufacturer part number?The manufacturer part number for this helmet is AA0810AG1R. Does this helmet require a signature for delivery?Yes. A signature is required when this helmet is delivery

Bell HP6 RD-4C FIA 8860-2018 Carbon Fiber Racing Helmet The Bell HP6 RD-4C Carbon Fiber Racing Helmet combines Bell's professional-level HP helmet technology with an integrated radio communication and hydration configuration designed specifically for closed-cockpit racing. Based on technology developed for Bell's HP7 platform, the HP6 features an ultra-lightweight Advanced full carbon fiber shell and is homologated to the demanding FIA 8860-2018 standard. The RD-4C version is designed for drivers who prefer in-ear communication. Bell integrates the radio electronics, noise-cancelling microphone, communication wiring, and hydration routing directly into the helmet, eliminating the need to drill or modify the chin bar. The communication system is ready for compatible 3.5mm earbud transducers, while the integrated hydration routing provides a clean solution for endurance and long-duration racing. Bell HP6 RD-4C FIA 8860-2018 Helmet Features Ultra-lightweight Advanced full carbon fiber shell FIA 8860-2018 homologated Designed specifically for closed-cockpit racing Wide eyeport for excellent forward and peripheral visibility Integrated RD-4C radio communication electronics Designed for use with compatible earbuds 3.5mm connector compatible with earplug transducers Integrated dynamic noise-cancelling microphone Integrated hydration routing and drinking-system connection Advanced multi-density, multi-piece impact liner Extraction vents maximize airflow and cooling Compatible with optional forced-air cooling systems Factory-installed HANS anchors Bell SE06 3mm DSAF shield system Dark Grey high-strength, high-comfort FR interior Matte carbon fiber exterior finish Bell HP helmet bag included Integrated RD-4C Radio Communication System The Bell HP6 RD-4C is equipped with Bell's 4-conductor IMSA-style helmet radio configuration. A dynamic noise-cancelling microphone is integrated directly into the helmet's face piece and pre-wired for use with compatible racing radio systems. The system includes a coil-style communication cord with a heavy-duty molded 4-pin connector and a 3.5mm connection designed for compatible in-ear transducers. This makes the RD-4C an excellent choice for drivers who prefer earbuds rather than traditional helmet-mounted speakers. Integrated 4-conductor IMSA-style communication system Dynamic noise-cancelling microphone integrated into the face piece Coil-style communication cable Heavy-duty molded 4-pin connector 3.5mm connection for compatible earbud transducers Communication components integrated without drilling the helmet Earbuds are not included. Drivers can select compatible earplug transducers based on their radio and communication requirements. RD-4C vs. RD-4C/EC The Bell HP6 RD-4C and RD-4C/EC share the same FIA 8860-2018 Advanced carbon fiber helmet platform, but they use different driver audio configurations. HP6 RD-4C: Designed for use with compatible in-ear earbuds or earplug transducers. Earbuds are not included. HP6 RD-4C/EC: Uses integrated electronic speakers and earcups for communication and additional noise isolation. The RD-4C is ideal for racers who prefer molded or conventional racing earbuds and want to minimize additional components around the ears. Integrated Hydration System Routing Long-duration and endurance racing can make driver hydration critical. The HP6 RD-4C incorporates dedicated channels and connections for hydration equipment directly into the helmet design. The integrated system includes routing and a one-way connection for a drinking system, allowing hydration components to be installed without drilling the helmet's chin bar or modifying the face piece. The external drinking system and bite valve are not included and must be selected separately based on the driver's hydration setup. Advanced FIA 8860-2018 Carbon Fiber Construction The HP6 uses Bell's Advanced full carbon fiber shell technology to combine exceptional strength with extremely low weight. The shell is paired with an advanced multi-density, multi-piece energy-absorbing liner engineered for the high impact-performance requirements of FIA 8860-2018 competition. FIA 8860 helmets are developed for demanding professional motorsports environments where protection, weight, visibility, and driver comfort are critical. Wide Eyeport for Closed-Cockpit Racing The Bell HP6 was designed specifically for racers competing in enclosed vehicles. Its wide eyeport provides an expansive field of vision to help improve visibility of mirrors, instruments, competitors, and track surroundings. This design makes the HP6 particularly well suited for GT cars, touring cars, prototypes, endurance cars, and other closed-cockpit competition vehicles. Bell SE06 3mm DSAF Shield The Bell HP6 uses the Bell SE06 3mm helmet shield. A clear DSAF shield is included and installed on the helmet. Bell's DSAF shield construction is designed to provide excellent optical clarity while helping control fogging in demanding racing environments. Bell SE06 3mm shield system Clear DSAF shield included Plastic tear-off posts installed Wide eyeport design for improved visibility Ventilation and Forced-Air Cooling Compatibility Strategically positioned extraction vents help move warm air out of the helmet and improve circulation around the driver's head. For cars equipped with external driver cooling systems, the HP6 can also accept optional forced-air components. A top forced-air intake can be installed on either the left or right upper ventilation location, giving racers flexibility when routing cooling hoses through different cockpit layouts. Integrated extraction vents maximize airflow Optional left- or right-side top forced-air connection Compatible with external helmet cooling systems Quick Lock V10 forced-air components available Compatible with Maglock forced-air connections Bell HP6 RD-4C Specifications Manufacturer: Bell Helmets Model: HP6 RD-4C Part Number Series: 1140101-1140109, depending on size Helmet Type: Full-face closed-cockpit racing helmet Shell Construction: Advanced full carbon fiber Exterior Finish: Matte Carbon Homologation: FIA 8860-2018 Communication: Integrated RD-4C radio electronics for earbuds Earbuds: Not included Microphone: Integrated dynamic noise-cancelling microphone Earbud Connection: 3.5mm Hydration: Integrated routing and drinking-system connection HANS Anchors: Factory installed Interior: Dark Grey high-strength, high-comfort FR fabric Shield: Bell SE06 3mm DSAF Helmet Bag: Bell HP helmet bag included Special-Order Interior Colors The standard HP6 interior uses Bell's Dark Grey high-strength, high-comfort FR fabric. Alternative interior colors may be available by special order for an additional charge. Tan White Red Purple Blue Green Neon Yellow Pink Orange What's Included With the Bell HP6 RD-4C Bell HP6 RD-4C FIA 8860-2018 carbon fiber racing helmet Integrated RD-4C communication electronics Integrated noise-cancelling microphone Integrated hydration routing Clear Bell SE06 3mm DSAF shield installed Factory-installed HANS anchors Plastic tear-off posts installed Bell HP helmet bag Hex wrench key Earbuds, bite valve, and external drinking system are not included. Bell HP6 RD-4C Helmet Sizing Chart Read the Competition Motorsport Auto Racing Helmet Buyer's Guide for more information about measuring, helmet fit, safety standards, and selecting the correct racing helmet. Questions About the Bell HP6 RD-4C Q: What certification does the Bell HP6 RD-4C have?A: The Bell HP6 RD-4C is homologated to the FIA 8860-2018 helmet standard. Q: Does the HP6 RD-4C have built-in radio electronics?A: Yes. The RD-4C has an integrated radio communication system with a noise-cancelling microphone and wiring designed for compatible in-ear transducers. Q: Are earbuds included with the HP6 RD-4C?A: No. The RD-4C is wired for compatible earbuds or earplug transducers, but the earbuds themselves are not included. Q: What is the difference between the HP6 RD-4C and RD-4C/EC?A: The RD-4C is designed for use with earbuds. The RD-4C/EC configuration uses electronic speakers and earcups for communication and additional noise isolation. Q: Does the HP6 RD-4C include hydration equipment?A: The helmet includes integrated hydration routing and a drinking-system connection. The external drinking system and bite valve are not included. Q: Does the Bell HP6 RD-4C include HANS anchors?A: Yes. HANS anchors are factory installed. Q: Can the HP6 RD-4C be used with a forced-air cooling system?A: Yes. Optional forced-air components can be installed on the upper left or right ventilation locations for connection to an external helmet cooling system. Q: What shield fits the Bell HP6?A: The Bell HP6 uses the Bell SE06 3mm shield system and includes a clear DSAF shield. Q: Is a helmet bag included?A: Yes. A Bell HP helmet bag is included with the HP6 RD-4C. ```

Forgeline Motorsport Series Wheels Corvette C7 Z06/ZR1/GS Track Package This Forgeline Wheels Package Fits The Following: Chevrolet Corvette Z06 (2015-2019) Chevrolet Corvette Z06 w/Z07 pkg (2015-2019) Chevrolet Corvette Grand Sport Z15 (2017-2019 Chevrolet Corvette ZR1 (2019)  The Easy Way To Buy Forgeline Wheels For Your C7! The best way to get Forgeline wheels for your C7 Corvette Z06, ZR1, or Grand Sport is in the Competition Motorsport dedicated Track Package. We have sold hundreds of Forgeline Wheels for these Corvettes, and we boiled all of that experience with offsets, wheel sizes, brake and fender clearance, ABS functionality, etc., into this easy to use Track Package for the C7. Competition Motorsport is taking the guesswork out of upgrading to Forgeline wheels.Forgeline Motorsport Series lightweight forged racing wheels are engineered for race cars and dedicated track duty, although they are also excellent for everyday driving. Forgeline wheels are machined from billets of forged 6061-T6 aluminum and include features like I-beamed spokes, deeply-machined centers, and aggressive load ratings that make them extremely strong, stiff, and lightweight.Simply choose your wheel style and finish (Standard or Premium), and we'll get your Forgeline Motorsport Series wheels started.1 It's that easy! What Is Included in the Forgeline Wheels Track Package The base price includes two front and two rear Forgeline Motorsport Series wheels finished in any standard powder coat color. Also included are knurled tire beads to keep tires from slipping around the rims. (Tires get hot; it happens!) The Competition Motorsport Forgeline Wheels Track Package for the C7 Corvettes is built around the Forgeline GS1R, VX1R, and ZO1R racing wheels. We've found these to be extremely popular with C7 owners and complementary to the Corvette's aggressive styling. Of course, if you prefer another style of Forgeline Wheels or you just have questions, talk to one of our Forgeline specialists at (844) 438-7244. They will get you set up with a Forgeline Wheels Track Package that's precisely tailored to your needs. Forgeline ZO1R Wheel Classic style meets modern engineering in the Forgeline Wheels ZO1R. With a 2100-lb. load rating suitable for dedicated track duty, the ZO1R was engineered as a track-ready competition wheel. The ZO1R, with its classic split five-spoke design and open lug center, is a fully-forged one-piece monoblock wheel utilizing Forgeline's computer-simulated FEA design process so it is lightweight, stiff, and has excellent fatigue strength. Forgeline GS1R Wheel Originally designed for professional racing teams in the IMSA Continental Tire SportsCar Challenge, the Forgeline Wheels GS1R combines advanced wheel technology with motorsport-engineered design. From its one-piece forged monoblock construction and I-beamed spokes to its 2100-lb. street-tire load rating, the GS1R is fully engineered to withstand the rigors of top-level endurance racing. Forgeline Wheels VX1R With a load rating suitable for dedicated track duty, the Forgeline VX1R racing wheel was engineered for beauty and braun! It's a fully track-ready competition wheel equal in strength to Forgeline's benchmark GS1R competition wheel. The VX1R features a sharp Y-spoke design with long spokes flowing into the center lock. The Forgeline Wheels VX1R is one of the most popular racing wheels for the Chevy C7 Corvette Z06. Forgeline Wheels Offers Amazing Colors for the C7 Corvette Z06/ZR1/GS Forgeline Wheels can be finished many beautiful and durable standard colors at no extra charge. Or, upgrade to one of several premium machined or brushed finishes available for your Forgeline Wheels Track Package. Combined with clear or tinted-clear powder coats, you can create a truly stunning customized look for your C7 Corvette. Notes... 1 Forgeline Motorsport Series wheels for the C7 Corvette Z06/ZR1/GS are custom made to order. Lead time for Forgeline Wheels is typically three to five weeks. Competition Motorsport carries a large inventory of Forgeline Wheels for C7 fitments on-hand. We may have what you are looking for in stock and ready for immediate shipment. Feel free to give us a call at (844) 438-7244 to discuss lead time for your Forgeline Track Package.

OMP ONE EVO FX Race Shoes The OMP ONE EVO FX Race Shoes are premium lightweight racing shoes designed for serious drivers who need comfort, control, and FIA-approved protection. Built for high-level motorsport use, the ONE EVO FX combines breathable fire-resistant materials, a Nomex inner lining, carbon fiber sole inserts, and a reinforced toe and heel for confidence in the cockpit. Designed for precise pedal feedback, the OMP ONE EVO FX gives drivers the sensitivity needed for braking, throttle modulation, and smooth shifting. The lightweight construction helps reduce fatigue during long sessions, while the secure lace and Velcro strap closure keeps the shoe firmly in place. OMP ONE EVO FX Racing Shoe Features FIA 8856-2018 approved for modern motorsport competition. Ultra-lightweight construction helps reduce driver fatigue. Breathable fire-resistant outer fabric improves comfort in the cockpit. Nomex inner lining provides added fire-resistant protection. Carbon fiber inserts improve sole rigidity and pedal feedback. New-generation sole design enhances sensitivity and control. Reinforced toe and heel improve protection and durability. Lightweight lace system with Velcro ankle strap for a secure fit. High-top racing shoe profile for support and coverage. Lightweight Racing Performance The OMP ONE EVO FX is engineered with an ultra-lightweight design to help drivers stay comfortable through long track sessions, race weekends, and endurance events. Less weight on the foot can improve comfort and reduce fatigue, especially during repeated braking, throttle, and clutch inputs. Fire-Resistant Construction Built with breathable fire-resistant fabric and a Nomex inner lining, the ONE EVO FX provides the safety construction required for FIA-approved motorsport footwear. The breathable material helps manage heat while maintaining the protection expected from a professional racing shoe. Carbon Fiber Sole Inserts Carbon fiber inserts in the sole help deliver consistent pedal feedback by improving rigidity and response. This gives the driver a more connected feel with the pedals, making it easier to sense braking pressure, throttle position, and pedal movement inside the cockpit. New-Generation Sole for Pedal Control The sole is designed to provide excellent sensitivity and grip for precise driver inputs. Whether you are managing trail braking, heel-toe downshifts, or throttle modulation, the ONE EVO FX is built to help translate small foot movements into confident control. Reinforced Toe and Heel The reinforced toe and heel areas improve durability while adding protection in high-wear zones. This construction helps the shoe hold up to repeated cockpit use, paddock wear, and the demands of competitive driving. Secure Lace and Velcro Closure A lightweight lace system provides a close fit across the foot, while the Velcro ankle strap adds extra support and security. This combination helps keep the shoe stable during aggressive pedal work without adding unnecessary bulk. OMP ONE EVO FX Race Shoe Specifications Approval: FIA 8856-2018 Outer Material: Fire-resistant fabric Inner Material: Nomex lining Sole: New-generation sole with carbon fiber inserts Closure: Lightweight laces with Velcro ankle strap Protection: Reinforced toe and heel Use: Auto racing, track days, club racing, GT racing, and professional motorsport OMP ONE EVO FX Sizing Chart  OMP ONE EVO FX Race Shoe FAQs Are the OMP ONE EVO FX Race Shoes FIA approved?Yes. The OMP ONE EVO FX Race Shoes are FIA 8856-2018 approved for motorsport competition use. What makes the OMP ONE EVO FX good for pedal control?The new-generation sole and carbon fiber inserts help provide better rigidity, sensitivity, and feedback through the pedals. Are the OMP ONE EVO FX shoes comfortable for long driving sessions?Yes. The lightweight construction, breathable fire-resistant fabric, and Nomex inner lining are designed to support comfort during long sessions and race weekends. Do these racing shoes have added protection?Yes. The ONE EVO FX features reinforced toe and heel areas for improved durability and added protection in high-wear zones. How do the OMP ONE EVO FX shoes close?They use lightweight laces with a Velcro ankle strap for a secure and supportive fit.

Alpinestars GP Tech v4 Driver Race Suit SFI Cutting-Edge Racing Protection With Premium Driver Comfort The Alpinestars GP Tech v4 Driver Race Suit SFI brings advanced motorsport technology, lightweight materials, and professional driver comfort together in one serious racing suit. Designed for racers who want protection without feeling restricted, the GP Tech v4 delivers a premium fit, breathable construction, and flexible movement where drivers need it most. From its exclusive outer shell material to its aramidic-based knit lining, the GP Tech v4 is engineered to help regulate body temperature, improve comfort, and support confident performance behind the wheel. Whether you are competing in sprint races, endurance events, or serious track competition, this Alpinestars race suit is built to keep you focused on the drive. Advanced Three-Layer Construction The Alpinestars GP Tech v4 uses an advanced three-layer construction designed for breathability, comfort, and effective temperature regulation. The exclusive twill outer shell material was developed specifically for Alpinestars, giving the suit a clean professional look while supporting lightweight performance and protection. Inside, the aramidic-based knit lining offers a soft, lightweight feel against the body. Its open-weave structure improves airflow, while additional breathable panels on the sides help release heat during demanding track sessions. Built For Mobility In The Driving Position The GP Tech v4 is anatomically engineered with pre-curved arms and legs to help reduce bunching while seated in the cockpit. Formula 1-derived stretch panels are strategically placed in high-movement zones, including the lumbar area, elbows, knees, crotch, center back, and lower back. This stretch panel layout helps the suit move naturally with the driver, improving comfort during steering, shifting, braking, and getting in or out of the car. Comfort-Focused Driver Details The Alpinestars GP Tech v4 Driver Race Suit SFI includes several comfort-focused details that make a difference during long sessions. Lightweight knitted cuffs create a snug, low-bulk fit at the wrists and ankles, while the soft knit collar helps reduce irritation around the neck. An elastic waist construction improves fit and comfort, while printed logos help reduce weight and preserve material integrity. The premium YKK metal zipper adds durability, and thigh pockets provide practical storage without disrupting the suit’s performance design. Safety-Driven Features The GP Tech v4 includes an all-new extraction handle inspired by Formula 1 safety development. This feature is designed to assist with driver extraction when quick access is needed. Combined with its advanced construction, breathable materials, and protective design, the GP Tech v4 is built for drivers who take safety seriously. Alpinestars GP Tech v4 Driver Race Suit Features Advanced three-layer racing suit construction Exclusive Alpinestars-developed twill outer shell material Aramidic-based knit lining for lightweight comfort Open-weave lining structure for improved breathability Additional breathable side panels Formula 1-derived stretch panels Stretch zones at the center back, lower back, elbows, knees, and crotch Anatomically engineered pre-curved arms and legs All-new extraction handle design Lightweight knitted wrist and ankle cuffs Soft knit fabric collar Elastic waist construction Printed logos to reduce weight and preserve material integrity Premium YKK metal zipper Thigh pockets Athletic-regular fit design Designed for serious motorsport competition Why Choose The Alpinestars GP Tech v4 Driver Race Suit SFI? The Alpinestars GP Tech v4 Driver Race Suit SFI is ideal for drivers who want a premium race suit with modern construction, flexible movement, breathable comfort, and professional styling. Its combination of stretch panels, lightweight materials, soft lining, and driver-focused ergonomics makes it a strong choice for competitive racers who need safety and comfort in one suit. With its athletic-regular fit, advanced three-layer construction, and Alpinestars motorsport design, the GP Tech v4 delivers the kind of comfort and confidence drivers expect from high-performance racing gear. Alpinestars GP Tech v4 Driver Race Suit Size Chart Frequently Asked Questions Q: What type of construction does the Alpinestars GP Tech v4 use?A: The GP Tech v4 uses advanced three-layer construction designed for breathability, comfort, and temperature regulation. Q: Is the Alpinestars GP Tech v4 comfortable in the car?A: Yes. Pre-curved arms and legs, Formula 1-derived stretch panels, soft knit cuffs, and an elastic waist help improve comfort in the seated driving position. Q: Where are the stretch panels located?A: Stretch panels are located in key movement areas including the center back, lower back, elbows, knees, crotch, and lumbar area. Q: Does the GP Tech v4 have breathable panels?A: Yes. The suit uses an open-weave aramidic-based lining with additional breathable side panels for improved airflow. Q: What is the fit of the Alpinestars GP Tech v4?A: The GP Tech v4 uses an athletic-regular fit designed to balance comfort, mobility, and a professional race-ready profile. Q: Does this suit have pockets?A: Yes. The Alpinestars GP Tech v4 includes thigh pockets for practical storage. Q: Can you wash a racing suit?A: Yes, but always follow the manufacturer’s care instructions to protect the suit’s fire-resistant materials and overall integrity. Q: What should I wear under my race suit?A: Fire-resistant undergarments are recommended for added protection, comfort, and proper motorsport safety layering.

OMP HTE-R BMW Racing Seat with M Rain Fabric The OMP HTE-R is a head restraint racing seat designed to deliver modern safety and exceptional support while keeping costs under control. Its fiberglass shell and iconic M Rain fabric give dedicated track drivers a secure and comfortable seating position for long sessions behind the wheel. Advanced support with iconic M Rain styling Features Gel-coated fiberglass shell for strength and durability Iconic M Rain fabric pattern available exclusively in the standard size Large shoulder harness openings to fit a range of driver heights High side bolsters provide improved lateral leg stability and impact protection Removable back, base, and leg cushions allow custom comfort and fit Compatible with HANS devices for added head and neck safety Fits most drivers up to a 36 inch waist Homologation FIA 8859-1999 OMP HTE-R BMW Racing Seat with M Rain Fabric FAQs Is the OMP HTE-R suitable for taller drivers? The seat features large shoulder harness slots designed to accommodate various torso heights, offering better alignment for taller drivers. Does the M Rain fabric change the fit or size? No, the M Rain version is available only in the standard size but does not alter the dimensions or seating position of the HTE-R. Can the cushions be removed for customization? Yes, the back, base, and leg cushions are all removable to fine tune comfort and support based on driver preference. Is this seat compatible with side mounts? The HTE-R is designed for side mounting and works with most standard side mount brackets for installation in race vehicles. What type of harness works best with this seat? Five and six point racing harnesses are recommended and pair well with the large harness openings and head restraint structure. This seat is a strong choice for drivers building a focused track or race car and looking for FIA rated protection with distinctive styling.