Race Technologies Racing Brake Pad P1015 Image
Race Technologies P1015 Racing Brake Pads (Rear) from $507.00
Race Technologies P1015 / 2368 Racing Brake Pads Race Technologies P1015 / 2368 Racing Brake Pads Fitment Guide Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X   The Race Technologies P1015.15 brake pad features a compact, purpose-built backing plate designed for compatible high-performance braking systems. Measuring 110 mm wide by 69 mm high with a 52 mm friction material depth, the P1015 combines a distinctive curved friction surface with a low-profile mounting design for demanding performance driving applications. Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1015.15 allows drivers to select the friction characteristics best suited to their vehicle, brake system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, proper pad shape identification and compound selection are essential for consistent braking performance. Race Technologies P1015 / 2368 Brake Pad Specifications Pad Shape: P1015 Part Designation: P1015.15 Overall Width: 110 mm Overall Height: 69 mm Friction Material Depth: 52 mm Nominal Pad Thickness: 15 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1015 features two upper retaining openings, a curved upper friction edge, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible brake calipers. Always compare the P1015 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to deliver consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1015 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1015 Brake Pads? The Race Technologies P1015 combines a compact 110 mm overall width with a 69 mm height and 52 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1015 backing plate geometry 110 mm overall width and 69 mm overall height 52 mm friction material depth 15 mm nominal pad thickness Choice of RE10 racing or TS20 street/track compounds Race Technologies P1015 Brake Pad Fitment The Race Technologies P1015 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 110 mm overall width, 69 mm overall height, 52 mm friction material depth, 15 mm thickness, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1015 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1015.15 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical drawing of a Pagid 8279 brake pad with dimensions labeled
Race Technologies P1303 / 2465 Brake Pads from $507.00
Race Technologies Racing Brake Pad Shape P1303 / 2465 Race Technologies P1303 / 2465 Brake Pad Fitment Guide Make Model Years Front Rear Chevrolet Corvette C8 Z51 2020 +       X   The Race Technologies P1303 brake pad combines a compact 126.1 mm backing plate width with a distinctive performance-oriented friction profile. Measuring 78.8 mm high with a 58.5 mm friction material depth, the P1303 is designed for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport applications. Competition Motorsport offers the Race Technologies P1303 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and driving environment. Selecting the correct P1303 pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1303 / 2465 Brake Pad Specifications Pad Shape: P1303 / 2465 Overall Width: 126.1 mm Overall Height: 78.8 mm Friction Material Depth: 58.5 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound The P1303 features a distinctive backing plate with two upper circular retaining openings, two smaller outer locating holes, a deep offset upper relief, and a curved friction surface with angled lower corners. This specialized geometry distinguishes it from other performance brake pad shapes and must be matched to the correct caliper configuration. Always compare the P1303 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive option for drivers seeking dependable braking across a range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1303 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1303 / 2465 Brake Pads? The Race Technologies P1303 combines a 126.1 mm overall width with a 78.8 mm height and 58.5 mm friction material depth. Its distinctive mounting geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems subjected to demanding driving conditions. Distinctive Race Technologies P1303 backing plate geometry 126.1 mm overall width and 78.8 mm overall height 58.5 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies P1303 / 2465 Brake Pad Fitment The Race Technologies P1303 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 126.1 mm overall width, 78.8 mm overall height, 58.5 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1303 / 2465 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1303 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical line drawing showing Race Technologies P1302 brake pad dimensions with front and side profile measurements labeled in millimeters and inches.
Race Technologies 2464 / P1302 Brake Pad from $507.00
Race Technologies 2464 / P1302 Brake Pads Corvette C8 Z51 Racing Brake Pads (Front) The Race Technologies P1302.16 brake pad is a performance-focused pad shape developed for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 151.60 mm wide by 80.19 mm high with a 68.20 mm friction material depth, the P1302 features a distinctive curved friction surface and specialized backing plate geometry for demanding braking applications. Competition Motorsport offers the Race Technologies P1302.16 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Choosing the correct pad shape and compound helps ensure proper fitment and predictable braking performance. Race Technologies 2464 / P1302.16 Brake Pad Specifications Pad Shape: 2464 / P1302 Part Designation: P1302.16 Overall Width: 151.60 mm Overall Height: 80.19 mm Friction Material Depth: 68.20 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound The P1302 features two upper circular retaining openings, two smaller rectangular locating openings, and a broad curved friction surface. The distinctive backing plate and mounting geometry must be matched to the correct brake caliper before ordering. Always compare the P1302 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive option for drivers who need dependable braking across a range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1302 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies 2464 / P1302.16 Brake Pads? The Race Technologies P1302 combines a 151.60 mm overall width with an 80.19 mm height and 68.20 mm friction material depth. Its curved friction surface and specialized backing plate geometry make it a replacement option for compatible high-performance braking systems where precise pad dimensions and mounting features are essential. Distinctive Race Technologies P1302 backing plate geometry 151.60 mm overall width and 80.19 mm overall height 68.20 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies 2464 / P1302 Brake Pad Fitment The Race Technologies P1302 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 151.60 mm overall width, 80.19 mm overall height, 68.20 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies 2464 / P1302.16 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1302.16 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical drawing of a D2516 brake pad shape image
Race Technologies P1300 Brake Pad from $580.00
Race Technologies P1300 Brake Pad Race Technologies P1300 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Ford Mustang S650 PP 2024 -  X Ford Mustang S650 Dark Horse 2024 - X   The Race Technologies P1300 brake pad delivers performance-focused friction options for drivers who demand precise braking control, predictable modulation, and consistent performance during demanding track sessions. Designed for compatible high-performance brake calipers, the P1300 is an excellent option for enthusiasts and racers seeking a purpose-built brake pad for HPDE, track days, club racing, and motorsport applications. Competition Motorsport offers the Race Technologies P1300 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to choose the friction characteristics best suited to their vehicle, braking system, tire grip, and driving style. Selecting the correct compound and confirming the P1301 backing plate shape are essential for achieving the desired braking performance and proper fitment. Race Technologies P1300 Brake Pad Specifications Pad Shape: P1300 Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and endurance motorsport, depending on compound Fitment: Compatible brake calipers requiring the P1211 backing plate shape RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used across street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for enthusiasts seeking strong braking performance without sacrificing everyday drivability. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where dependable braking response across a range of operating temperatures is important. RE10 vs. TS20: Which Compound Should You Choose? The best Race Technologies P1301 compound depends on how your vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, club racing, sprint racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1300 Brake Pads? The Race Technologies P1301 provides a specialized pad shape for compatible high-performance brake calipers. Combined with the RE10 and TS20 friction compound options, it allows drivers to tailor braking characteristics to their intended driving environment without compromising the importance of proper pad fitment. Race Technologies P1300 backing plate shape for compatible calipers Choice of RE10 racing or TS20 street/track compounds Performance-oriented friction materials for demanding driving conditions Suitable for HPDE, track days, and motorsport depending on compound Technical pad shape verification recommended before ordering Race Technologies P1300 Brake Pad Fitment The Race Technologies P1300 pad shape is intended for brake calipers requiring its specific backing plate geometry, mounting features, and friction material dimensions. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, compare the P1300 pad drawing and specifications with your existing brake pads or caliper manufacturer's fitment information. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1300 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1301 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
P1301 drawing of a brake pad shape on a white background, serving as a technical diagram or placeholder graphic.
Race Technologies P1301 Brake Pad from $507.00
Race Technologies P1301 Brake Pad Race Technologies P1301 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Ford Mustang S650 PP 2024 -  X Ford Mustang S650 Dark Horse 2024 - X   The Race Technologies P1301 brake pad delivers performance-focused friction options for drivers who demand precise braking control, predictable modulation, and consistent performance during demanding track sessions. Designed for compatible high-performance brake calipers, the P1301 is an excellent option for enthusiasts and racers seeking a purpose-built brake pad for HPDE, track days, club racing, and motorsport applications. Competition Motorsport offers the Race Technologies P1301 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to choose the friction characteristics best suited to their vehicle, braking system, tire grip, and driving style. Selecting the correct compound and confirming the P1301 backing plate shape are essential for achieving the desired braking performance and proper fitment. Race Technologies P1301 Brake Pad Specifications Pad Shape: P1301 Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and endurance motorsport, depending on compound Fitment: Compatible brake calipers requiring the P1211 backing plate shape RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used across street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for enthusiasts seeking strong braking performance without sacrificing everyday drivability. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where dependable braking response across a range of operating temperatures is important. RE10 vs. TS20: Which Compound Should You Choose? The best Race Technologies P1301 compound depends on how your vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, club racing, sprint racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1301 Brake Pads? The Race Technologies P1301 provides a specialized pad shape for compatible high-performance brake calipers. Combined with the RE10 and TS20 friction compound options, it allows drivers to tailor braking characteristics to their intended driving environment without compromising the importance of proper pad fitment. Race Technologies P1301 backing plate shape for compatible calipers Choice of RE10 racing or TS20 street/track compounds Performance-oriented friction materials for demanding driving conditions Suitable for HPDE, track days, and motorsport depending on compound Technical pad shape verification recommended before ordering Race Technologies P1301 Brake Pad Fitment The Race Technologies P1301 pad shape is intended for brake calipers requiring its specific backing plate geometry, mounting features, and friction material dimensions. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, compare the P1301 pad drawing and specifications with your existing brake pads or caliper manufacturer's fitment information. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1301 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1301 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
A comparison chart for RACE TECHNOLOGIES  brake pad compounds, comparing RE10 and TS20. The graphic features two large radar charts: a red RE10 chart on the left labeled 'Pure Racing Performance' and a blue TS20 chart.
Race Technologies P1211 Brake Pad from $507.00
Race Technologies P1211 Brake Pad Race Technologies P1211 Brake Pad Fitment Guide Make Model Build (Year) Front Rear BMW M5 [F90] 2017 - 2023 X BMW M8 [G14] 2018 - X   The Race Technologies P1211 brake pad delivers performance-focused friction options for drivers who demand precise braking control, predictable modulation, and consistent performance during demanding track sessions. Designed for compatible high-performance brake calipers, the P1211 is an excellent option for enthusiasts and racers seeking a purpose-built brake pad for HPDE, track days, club racing, and motorsport applications. Competition Motorsport offers the Race Technologies P1211 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to choose the friction characteristics best suited to their vehicle, braking system, tire grip, and driving style. Selecting the correct compound and confirming the P1211 backing plate shape are essential for achieving the desired braking performance and proper fitment. Race Technologies P1211 Brake Pad Specifications Pad Shape: P1211 Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and endurance motorsport, depending on compound Fitment: Compatible brake calipers requiring the P1211 backing plate shape RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used across street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for enthusiasts seeking strong braking performance without sacrificing everyday drivability. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where dependable braking response across a range of operating temperatures is important. RE10 vs. TS20: Which Compound Should You Choose? The best Race Technologies P1211 compound depends on how your vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, club racing, sprint racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1211 Brake Pads? The Race Technologies P1211 provides a specialized pad shape for compatible high-performance brake calipers. Combined with the RE10 and TS20 friction compound options, it allows drivers to tailor braking characteristics to their intended driving environment without compromising the importance of proper pad fitment. Race Technologies P1211 backing plate shape for compatible calipers Choice of RE10 racing or TS20 street/track compounds Performance-oriented friction materials for demanding driving conditions Suitable for HPDE, track days, and motorsport depending on compound Technical pad shape verification recommended before ordering Race Technologies P1211 Brake Pad Fitment The Race Technologies P1211 pad shape is intended for brake calipers requiring its specific backing plate geometry, mounting features, and friction material dimensions. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, compare the P1211 pad drawing and specifications with your existing brake pads or caliper manufacturer's fitment information. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1211 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1211 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical dimension diagram of a Race Technologies P1210 brake pad showing measurements: 110.5 mm width, 73.21 mm height, and pad depth of 64 mm.
Race Technologies P1210 Brake Pad from $507.00
Race Technologies P1210 Brake Pad Race Technologies P1210 Brake Pad Fitment Guide Make Model Build (Year) Front Rear BMW 3 Series [G20. G21]: M340i, M340d, 320i - 330i M-Technik, 330e M-Technik, 316d - 330d M-Technik 19 - X BMW Z4 Roadster [G29]: M40i. sDrive 20i-30i M-Technik 19 - X Toyota Supra A90 2019 X Toyota GR Supra 19 - X BMW 4 Series Coupe [G22. G23, G82]: M440i, M440d, 420i - 430i M-Technik, 420d - 430d M-Technik 20 - X The Race Technologies P1210 brake pad is a compact performance pad shape developed for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 110.5 mm wide by 73.21 mm high with a 64 mm friction material depth, the P1210 features a distinctive tapered backing plate and a deep upper center relief for specialized brake caliper applications. Competition Motorsport offers the Race Technologies P1210 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended driving environment. Race Technologies P1210 Brake Pad Specifications Pad Shape: P1210 Overall Width: 110.5 mm Overall Height: 73.21 mm Friction Material Depth: 64 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1210 features a distinctive backing plate with side locating tabs, a centrally positioned upper relief, and a tapered lower friction surface. Its specialized geometry makes accurate pad identification essential when replacing existing brake pads or selecting friction materials for compatible performance calipers. Always compare the P1210 technical drawing and dimensions with your existing brake pads or caliper specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking performance under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its friction characteristics help drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 is designed for performance vehicles used in both street and track environments. Offering responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 provides a versatile choice for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly suitable for spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1210 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate compound for your application. Why Choose Race Technologies P1210 Brake Pads? The Race Technologies P1210 combines a compact 110.5 mm overall width with a 73.21 mm height and 64 mm friction material depth. Its distinctive tapered friction surface and specialized backing plate design make it a replacement option for compatible high-performance braking systems where accurate pad shape and dimensions are essential. Distinctive Race Technologies P1210 backing plate geometry 110.5 mm overall width and 73.21 mm overall height 64 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies P1210 Brake Pad Fitment The Race Technologies P1210 pad shape is intended for brake calipers requiring its specific backing plate dimensions, locating features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 110.5 mm width, 73.21 mm height, 64 mm friction material depth, and mounting features against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1210 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1210 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical dimension diagram of a Race Technologies P1209 brake pad with measurements labeled in millimeters: 184.6 across the top, 106.
Race Technologies P1209 Brake Pad from $580.00
Race Technologies P1209 Brake Pad Race Technologies P1209 Brake Pad Fitment Guide Make Model Build (Year) Front Rear BMW M5 [F90] 2017 - 2023 X BMW M8 [G14] 2018 - X   The Race Technologies P1209 brake pad is a large-format performance pad shape designed for compatible high-capacity braking systems used in HPDE, track days, club racing, and professional motorsport. Measuring 184.6 mm wide by 106.1 mm high with an 87.4 mm friction material depth, the P1209 features a substantial friction surface and distinctive backing plate geometry for demanding braking applications. Competition Motorsport offers the Race Technologies P1209 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, driving style, and intended use. Race Technologies P1209 Brake Pad Specifications Pad Shape: P1209 Overall Width: 184.6 mm Overall Height: 106.1 mm Friction Material Depth: 87.4 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and endurance motorsport, depending on compound The P1209 features a distinctive wide backing plate with upper retaining openings, a centered relief, and a broad curved friction surface. Its mounting geometry and large friction area distinguish it from other performance brake pad shapes, making accurate shape identification essential for proper fitment. Always compare the P1209 technical drawing and dimensions with your existing brake pads or caliper specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking performance under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its friction characteristics help drivers maintain confidence through repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 is designed for performance vehicles used in both street and track environments. Offering responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 provides a versatile option for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly suitable for spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1209 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate compound for your application. Why Choose Race Technologies P1209 Brake Pads? The Race Technologies P1209 combines a substantial 184.6 mm overall width with a 106.1 mm height and 87.4 mm friction material depth. Its broad friction surface and specialized backing plate design make it a compelling option for compatible high-performance braking systems subjected to repeated heavy braking. Distinctive Race Technologies P1209 backing plate geometry 184.6 mm overall width and 106.1 mm overall height 87.4 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies P1209 Brake Pad Fitment The Race Technologies P1209 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 184.6 mm width, 106.1 mm height, 87.4 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1209 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1209 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical dimension diagram of a Race Technologies P1123 brake pad showing measurements: 198 mm width, 88 mm height, and pad depth 74 mm, with line drawings and text labels on a white background.
Race Technologies P1123 Brake Pad from $580.00
Race Technologies P1123 Brake Pad Race Technologies P1123 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 918 Spyder 13 - 15 X Porsche 991 GT3 [ceramic brakes] 15 - 18 X Porsche 991 GT3 RS [ceramic brakes] 15 - 18 X Porsche 991 Turbo [ceramic brakes] 13 - X Porsche 991 Turbo S [ceramic brakes] 13 - X Porsche 991.2 GT2 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 [ceramic brakes] 18 - X Porsche 991.2 GT3 RS [ceramic brakes] 18 - X Porsche 991 R [ceramic brakes] 16 - X Porsche 992 3.0 Carrera 4S [ceramic brakes] 18- X Porsche 718 Cayman GT4 4.0 [982] [ceramic brakes] 19 - X Porsche Cayman GT4 [981] [ceramic brakes] 16 - X Porsche 992 Carrera S [ceramic brakes] 2018 - X Porsche 992 GT3 [ceramic brakes] 2021 - X Porsche 718 Cayman GT4 4.0 RS [982] [ceramic brakes] 21 - X Porsche 992 Turbo [iron brakes] 20 - X Porsche 992 Carrera GTS [iron brakes] 24 - X Porsche Carrera 4 GTS [iron brakes] 24 - X Porsche Turbo S [iron brakes] 20 - X The Race Technologies P1123 brake pad is a large-format performance pad shape designed for compatible high-capacity braking systems used in HPDE, track days, club racing, and professional motorsport. Measuring 198 mm wide by 88 mm high with a 74 mm friction material depth, the P1123 features a broad, curved friction surface designed for demanding braking applications where consistent performance, precise modulation, and thermal stability are essential. Competition Motorsport offers the Race Technologies P1123 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended driving environment. Whether preparing for an HPDE event or a competitive race weekend, choosing the correct pad shape and compound is critical for dependable braking performance. Race Technologies P1123 Brake Pad Specifications Pad Shape: P1123 Overall Width: 198 mm Overall Height: 88 mm Friction Material Depth: 74 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and endurance motorsport, depending on compound The P1123 features a distinctive backing plate with two lower retaining openings, a centered upper relief, and two angled friction grooves. Its wide, curved friction surface and specific mounting geometry distinguish it from other large-format performance brake pad shapes. Always compare the P1123 technical drawing and dimensions with your existing brake pads or caliper specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking performance under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its friction characteristics help drivers maintain confidence through repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 is designed for performance vehicles used in both street and track environments. Offering responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 provides a versatile option for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly suitable for spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1123 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate compound for your application. Why Choose Race Technologies P1123 Brake Pads? The Race Technologies P1123 combines a substantial 198 mm overall width with an 88 mm height and 74 mm friction material depth. Its broad friction surface, angled groove configuration, and distinctive mounting geometry make it a specialized replacement option for compatible high-performance braking systems. Distinctive Race Technologies P1123 backing plate geometry 198 mm overall width and 88 mm overall height 74 mm friction material depth Two angled friction grooves shown in the technical drawing Choice of RE10 racing or TS20 street/track compounds Race Technologies P1123 Brake Pad Fitment The Race Technologies P1123 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 198 mm overall width, 88 mm overall height, 74 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1123 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1123 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Technical dimension diagram of Race Technologies P1017 brake pads showing measurements 114.7, 91.
Race Technologies P1017 Brake Pad from $1,015.00
Race Technologies P1017 Racing Brake Pads  
Sparco Kerb Advanced Lady women’s kart racing suit upper-body detail showing black, pink, and white design with Sparco shoulder branding.
Sparco Kerb Lady Women's Kart Racing Suit | FIA 8877-2022 from $449.00
Sparco Kerb Lady Women's Kart Racing Suit Sparco Kerb Lady Women's Kart Racing Suit | FIA 8877-2022Women's Karting Suit Built for Fit, Comfort, and Mobility The Sparco Kerb Advanced Lady Kart Racing Suit is designed specifically for female kart racers who want a lightweight, comfortable, and competition-ready suit with a dedicated women’s fit. Constructed from lightweight, abrasion-resistant materials, the two-layer Kerb Advanced Lady is designed to provide protection while allowing the driver to move naturally in the kart. Pre-curved arms, semi-floating sleeves, and strategically positioned stretch panels help reduce restriction and material bunching in the driving position. Ventilated areas at the underarms and inner thighs help improve airflow during demanding race sessions, while Sparco’s adjustable waist system allows the suit to be fine-tuned for a secure fit without the need for a traditional external belt. Sparco Kerb Advanced Lady Features Women-specific kart racing fit FIA 8877-2022 Grade 1 homologated Lightweight, abrasion-resistant two-layer construction Pre-curved arms designed to reduce material bunching while driving Semi-floating sleeves for improved arm and shoulder mobility Strategically positioned stretch panels for increased freedom of movement Internal thigh ventilation for improved airflow Underarm ventilation for increased breathability Adjustable waist straps in place of a traditional external belt Covered front zipper Hidden pockets for a clean, streamlined appearance Designed Specifically for Female Kart Racers The Kerb Advanced Lady is not simply a standard karting suit offered in smaller sizes. Sparco designed the suit around a dedicated women’s cut to provide a more natural fit through the shoulders, waist, hips, and legs. This driver-focused construction helps improve comfort in the seated position while reducing excess material that can interfere with movement behind the wheel. Lightweight Two-Layer Construction Sparco uses a lightweight two-layer construction to balance abrasion resistance with comfort and flexibility. The suit is designed for competitive kart racers who need protection without the excessive weight or bulk that can become uncomfortable during long sessions. Stretch inserts and semi-floating sleeves allow the suit to move with the driver, helping maintain mobility through steering inputs, braking, and driver changes in endurance karting applications. Improved Ventilation for Hot Race Conditions Kart racing can generate significant heat, particularly during long sessions and warm-weather events. Sparco integrates ventilation into key areas of the Kerb Advanced Lady, including the underarms and inner thighs, to help improve airflow where drivers need it most. The combination of lightweight construction, ventilation, and flexible materials makes the Kerb Advanced Lady well suited for racers who prioritize comfort without sacrificing competition-level protection. FIA 8877-2022 Grade 1 Karting Approval The Sparco Kerb Advanced Lady is homologated to FIA 8877-2022 Grade 1, making it suitable for karting competitions requiring the current FIA kart racing suit standard. Important: This suit is not fire-resistant and is intended exclusively for karting. It is not approved as an automobile racing fire suit. Sparco Kerb Lady Women's Kart Racing Suit Sizing Chart   For the best fit, compare your body measurements with Sparco’s official sizing chart before ordering. Karting suits should provide enough room for unrestricted movement while remaining close enough to the body to prevent excess material from bunching while seated. Frequently Asked Questions Is the Sparco Kerb Advanced Lady designed specifically for women?Yes. The Kerb Advanced Lady uses a dedicated women-specific cut designed to provide a better fit through the shoulders, waist, hips, and legs. Is the Sparco Kerb Advanced Lady FIA approved?Yes. The suit is homologated to FIA 8877-2022 Grade 1 for karting competition. Is this suit fire-resistant?No. The Kerb Advanced Lady is a kart racing suit and is not designed or approved as an automobile racing fire suit. Does the suit have ventilation?Yes. Ventilated areas are incorporated at the underarms and inner thighs to help increase airflow and driver comfort. Does the suit have stretch panels?Yes. Strategically positioned stretch panels and semi-floating sleeves help improve mobility while the driver is seated in the kart. Does the Sparco Kerb Advanced Lady have an external belt?No. Adjustable waist straps allow the fit to be tightened without using a traditional external belt. Can I use this suit for automobile racing?No. This suit is intended for karting only. Drivers participating in automobile racing should use a properly homologated fire-resistant racing suit.
Sparco RW-11 seamless Nomex underlayer bundle with RW-10 balaclava, RW-11 shirt, RW-11 pants, and RW-10 compression socks in black.
Sparco RW-11 Seamless Nomex Underwear Bundle | FIA 8856-2018 $1,130.00
Sparco RW-11 Seamless Racing Underlayer Bundle    The Sparco RW-11 Seamless Nomex Racing Underwear Bundle combines Sparco's premium seamless underlayers into one complete FIA 8856-2018 approved driver package. This bundle includes the RW-10 seamless balaclava, RW-11 seamless shirt, RW-11 seamless pants, and RW-10 compression Nomex socks. Designed around the driver's seated position, the RW-11 system focuses on lightweight construction, exceptional breathability, minimal pressure points, and a close compression-style fit. Sparco X-Cool Silver treatment in the shirt and pants helps draw heat away from the body while providing an antibacterial effect for improved comfort during long track sessions. What's Included 1x Sparco RW-10 Seamless Nomex Balaclava – FIA 8856-2018 approved head and neck protection 1x Sparco RW-11 Seamless Nomex Shirt – FIA 8856-2018 approved compression-style racing base layer 1x Sparco RW-11 Seamless Nomex Pants – FIA 8856-2018 approved seamless racing underwear 1x Sparco RW-10 Compression Nomex Socks – FIA 8856-2018 approved Class 1 graduated compression racing socks Sparco RW-11 Bundle Features FIA Homologation: FIA 8856-2018 approved components Seamless Construction: Helps minimize rubbing, seams, and pressure points beneath racing gear Compression Fit: RW-11 shirt and pants provide a close, performance-oriented fit Ultra-Soft Stretch Material: Allows excellent mobility while maintaining a smooth fit under a racing suit X-Cool Silver Technology: Helps draw heat away from the body surface Antibacterial Treatment: Helps control odor and bacterial buildup during extended use Driver-Focused Design: Engineered around the seated driving position for improved comfort Compression Socks: Graduated Class 1 compression helps support circulation and reduce fatigue Color Options: Black and white options available depending on component and inventory Sparco RW-10 Seamless Nomex Balaclava The Sparco RW-10 Balaclava is designed to provide lightweight FIA-certified protection while reducing common pressure points underneath a racing helmet. Its seamless construction eliminates seams across the mouth and chin, while the traditional center seam across the forehead has also been removed. FIA 8856-2018 approved Seamless stretchable Nomex construction Minimal external seams Designed for comfort in the driving position Reduced pressure points underneath a helmet Sparco RW-11 Seamless Nomex Shirt The Sparco RW-11 Shirt combines a fully seamless structure with ultra-soft stretchable material for a close, comfortable fit beneath a racing suit. Its compression-style construction minimizes excess material while maintaining excellent freedom of movement. Sparco X-Cool Silver treatment helps draw heat away from the driver's body while providing an antibacterial effect for improved comfort and freshness during long sessions. FIA 8856-2018 approved Fully seamless construction Compression-style fit Ultra-soft stretchable Nomex X-Cool Silver heat-management treatment Antibacterial properties Minimal external seams Available in black or white Sparco RW-11 Seamless Nomex Pants The Sparco RW-11 Pants use the same seamless, stretchable construction and X-Cool Silver treatment as the matching shirt. Their close compression fit helps reduce bunching and excess material underneath a racing suit while maintaining excellent mobility in the cockpit. FIA 8856-2018 approved Fully seamless construction Compression-style fit Stretchable Nomex material X-Cool Silver technology Antibacterial treatment Minimal external seams Available in black or white Sparco RW-10 Compression Nomex Socks The Sparco RW-10 Compression Socks use a unique helical structure that provides graduated Class 1 compression. Maximum pressure is applied around the ankle and gradually decreases toward the calf to help support the upward return of blood circulation. This graduated compression design is intended to help reduce muscle fatigue, improve comfort, and support driver focus during long racing sessions. FIA 8856-2018 approved Graduated Class 1 compression Helical compression structure Maximum pressure at the ankle with decreasing pressure toward the calf Designed to support circulation Helps reduce muscle fatigue Seamless stretchable Nomex construction Available in black or white Sizing Chart The RW-11 shirt and pants use Sparco racing underlayer sizing. Because these garments are designed with a compression-style fit, drivers who prefer a looser fit should consider selecting one size larger than normal. Why Choose the Sparco RW-11 Bundle? The Sparco RW-11 system is designed for drivers who want premium FIA-certified protection with minimal bulk, advanced cooling technology, and a close performance fit. The combination of seamless construction, X-Cool Silver treatment, and RW-10 graduated compression socks makes this package especially well suited for endurance racing, competitive motorsport, and drivers who spend extended periods in the car. Frequently Asked Questions Q: Is the Sparco RW-11 bundle FIA approved?A: Yes. The RW-10 balaclava and compression socks along with the RW-11 shirt and pants are FIA 8856-2018 approved. Q: Is the RW-11 a compression-fit underlayer?A: Yes. The RW-11 shirt and pants are designed with a close compression-style fit. If you prefer a looser fit, consider selecting one size larger. Q: What does Sparco X-Cool Silver do?A: X-Cool Silver is designed to help draw heat away from the body surface while also providing an antibacterial effect. Q: What is special about the RW-10 compression socks?A: The RW-10 socks use graduated Class 1 compression, applying greater pressure near the ankle and gradually reducing pressure toward the calf to support circulation and help reduce fatigue. Q: Can I select different sizes for the shirt and pants?A: Yes. Each component can be configured independently so you can select the appropriate size for each part of the bundle. Q: Are black and white options available?A: Yes. Black and white options are available for multiple RW-10 and RW-11 components depending on current inventory.
Sparco RW-10 racing underlayer bundle with balaclava, shirt, pants and Nomex socks FIA 8856-2018 certified
Sparco RW-10 Nomex Racing Underwear Bundle $1,078.00
Complete Sparco RW FIA Racing Underwear Package The Sparco RW-10 / RW-11 Seamless Nomex Racing Underwear Bundle combines four premium Sparco underlayer components into one complete FIA 8856-2018 certified racing underwear system. The package includes the RW-10 seamless balaclava, RW-11 seamless shirt, RW-11 seamless pants, and RW-10 compression socks. Developed around the driver's seating position, Sparco's RW underlayers focus on lightweight construction, breathability, stretch, and reduced pressure points. The RW-11 shirt and pants also incorporate Sparco X-Cool technology to help draw heat away from the body while providing an antibacterial effect. What's Included 1x Sparco RW-10 Seamless Nomex Balaclava – FIA 8856-2018 certified head and neck protection 1x Sparco RW-11 Seamless Nomex Shirt – FIA 8856-2018 certified compression-style racing base layer 1x Sparco RW-11 Seamless Nomex Pants – FIA 8856-2018 certified seamless racing underwear 1x Sparco RW-10 Compression Nomex Socks – FIA 8856-2018 certified graduated compression racing socks Sparco RW Bundle Features FIA Homologation: FIA 8856-2018 certified components Seamless Construction: Designed to minimize pressure points and improve comfort Ultra-Soft Stretch Material: Provides mobility and a close racing fit Driver-Focused Design: Engineered around the seated driving position X-Cool Technology: RW-11 shirt and pants help draw heat away from the body Antibacterial Treatment: X-Cool technology helps control odor during extended use Compression Fit: RW-11 garments provide a close, supportive fit underneath a racing suit Compression Socks: RW-10 socks use graduated Class 1 compression to support the lower legs Available Colors: Black or white depending on component and inventory Sparco RW-10 Seamless Nomex Balaclava The Sparco RW-10 Balaclava is designed to reduce pressure points underneath a racing helmet. Its seamless construction eliminates the traditional center seam across the forehead and avoids seams around the mouth and chin area for improved comfort. The stretchable Nomex construction provides excellent mobility while maintaining FIA 8856-2018 fire-resistant protection. Sparco RW-11 Seamless Nomex Shirt The Sparco RW-11 Shirt combines a seamless construction with ultra-soft stretch material and a compression-style fit. The garment is engineered to sit smoothly underneath a racing suit while reducing excess material and irritation. Sparco's X-Cool Silver treatment helps draw heat away from the body's surface and provides an antibacterial effect to improve comfort during demanding driving sessions. Sparco RW-11 Seamless Nomex Pants The RW-11 Pants use the same seamless, stretchable construction and X-Cool treatment as the matching shirt. Their compression-style fit helps reduce bunching underneath a racing suit while allowing the driver to move naturally in the cockpit. Drivers who prefer a looser fit may want to select one size larger than their normal underlayer size. Sparco RW-10 Compression Nomex Socks The Sparco RW-10 Compression Socks use a unique helical construction that provides graduated Class 1 compression. Maximum pressure is applied around the ankle and gradually decreases toward the calf to support blood circulation during extended driving sessions. This compression design is intended to help reduce muscle fatigue, improve comfort, and maintain driver focus while still providing FIA 8856-2018 fire-resistant protection. Sizing Chart The RW-11 shirt and pants use Sparco racing underwear sizing. Select the appropriate size and color for each garment when configuring your bundle. The RW-11 shirt has a compression-style fit. If you prefer a more relaxed fit, consider selecting one size larger than your normal size. FIA 8856-2018 Racing Underwear The Sparco RW system is designed for drivers looking for premium FIA-certified fire-resistant underwear with an emphasis on lightweight construction, minimal seams, cooling technology, and driver comfort. Combined with an approved racing suit, helmet, gloves, and shoes, this bundle provides a complete professional racing underlayer setup.
Sparco Shield RW-9 Nomex racing underwear bundle with balaclava, shirt, pants and RW-7 socks
Sparco Shield RW-9 Nomex Racing Underwear Bundle | FIA & SFI $787.00
Complete Sparco Shield RW-9 Racing Underwear Package The Sparco Shield RW-9 Nomex Racing Underwear Bundle combines premium Sparco fire-resistant underlayers into one complete driver package. This bundle includes the Shield RW-9 balaclava, Shield RW-9 shirt, Shield RW-9 pants, and Sparco RW-7 Nomex socks for head-to-toe racing protection. The Shield RW-9 collection is engineered around breathability, comfort, and driver movement. Sparco uses ultra-soft stretchable Nomex, perforated knit zones, minimal flat seams, and X-Cool Silver technology to create an underlayer system designed for demanding cockpit conditions. What's Included 1x Sparco Shield RW-9 Nomex Balaclava – SFI 3.3-rated fire-resistant head and neck protection 1x Sparco Shield RW-9 Nomex Shirt – FIA 8856-2000 and SFI 3.3 homologated racing underlayer 1x Sparco Shield RW-9 Nomex Pants – FIA 8856-2000 and SFI 3.3 rated racing underwear 1x Sparco RW-7 Nomex Socks – FIA 8856-2018 approved fire-resistant racing socks Sparco Shield RW-9 Bundle Features Premium Nomex Construction: Designed for high-level motorsport protection and comfort Seamless Stretch Zones: Improve mobility and reduce unnecessary pressure points Perforated Knit Areas: Increase airflow in key heat zones Minimal Flat Seams: Specialized stitching helps improve comfort beneath a racing suit X-Cool Silver Technology: Helps draw heat away from the skin Antibacterial Treatment: X-Cool Silver helps control odor during extended use Driver-Focused Fit: Designed specifically around the seated driving position Multiple Color Options: Black and white options available depending on component and inventory Sparco Shield RW-9 Nomex Balaclava The Shield RW-9 Balaclava combines stretchable Nomex with strategically placed breathable knit sections to provide lightweight protection underneath a racing helmet. Minimal external seams and soft construction help reduce pressure points during long driving sessions. The balaclava is SFI 3.3 rated and treated with Sparco X-Cool Silver technology to help improve heat management and comfort. Sparco Shield RW-9 Nomex Shirt The Shield RW-9 Shirt uses two different woven materials in key areas: thin stretch Nomex for mobility and double-perforated Nomex for improved breathability. The design follows the driver's seated position to provide a close, comfortable fit underneath a racing suit. X-Cool Silver treatment helps draw heat away from the skin while also providing an antibacterial effect. Sparco Shield RW-9 Nomex Pants The Shield RW-9 Pants use the same stretchable and perforated Nomex construction as the matching shirt. Minimal flat seams help reduce irritation while the ergonomic fit promotes comfort and mobility inside the cockpit. The pants are available in grouped sizes from XS-S through XXXL and in black or white depending on inventory. Sparco RW-7 Nomex Socks The Sparco RW-7 Nomex Socks complete the bundle with lightweight FIA 8856-2018 approved protection for the feet and lower legs. Their soft fiber blend and X-Cool treatment help improve comfort while maintaining a low-bulk fit inside racing shoes. Sizing The Shield RW-9 shirt and pants use Sparco underlayer sizing. Select the appropriate size and color for each garment when configuring your bundle. Sparco RW-7 socks are sized according to European shoe sizes. Sparco X-Cool Racing Underwear System The Sparco Shield RW-9 system is built for drivers who want a premium underlayer package focused on breathability, heat management, mobility, and comfort. Pair it with an approved racing suit, gloves, shoes, and helmet for a complete motorsport safety setup.
Sparco RW-7 white Nomex racing underwear bundle with balaclava, shirt, pants and socks FIA 8856-2018 certified
Sparco RW-7 Nomex Racing Underwear Bundle | FIA 8856-2018 $811.00
Sparco RW-7 Nomex Racing Underwear Bundle The Sparco RW-7 Nomex Racing Underwear Bundle combines the RW-7 Delta balaclava, RW-7 shirt, RW-7 pants, and RW-7 socks into one complete fire-resistant underlayer system for competitive motorsport. Designed around comfort, breathability, and protection, the RW-7 collection uses soft stretchable fibers, minimal seams, and Sparco X-Cool technology to help manage heat and moisture while reducing pressure points underneath your helmet and racing suit. What's Included 1x Sparco RW-7 Delta Balaclava – FIA 8856-2018 and SFI 3.3 approved fire-resistant head and neck protection 1x Sparco RW-7 Nomex Shirt – FIA 8856-2018 approved long-sleeve racing underlayer 1x Sparco RW-7 Nomex Pants – FIA 8856-2018 approved fire-resistant racing underwear 1x Sparco RW-7 Nomex Socks – FIA 8856-2018 approved mid-calf racing socks Sparco RW-7 Bundle Features FIA Certification: FIA 8856-2018 approved components SFI Certification: RW-7 Delta balaclava is SFI 3.3 approved X-Cool Technology: Helps draw heat away from the body surface Antibacterial Treatment: Helps reduce odor and bacterial buildup during extended use Soft Stretchable Fabric: Provides a close, comfortable racing fit Minimal External Seams: Helps reduce pressure points beneath racing gear Driver-Focused Construction: Designed for comfort while seated in the cockpit Moisture Management: Helps control sweat and heat during demanding driving sessions Complete Underlayer System: Includes balaclava, shirt, pants, and socks Sparco RW-7 Delta Balaclava The Sparco RW-7 Delta Balaclava combines FIA 8856-2018 and SFI 3.3 fire protection with a lightweight, moisture-wicking construction designed for long sessions behind the wheel. A body-mapped knit structure provides differentiated support between the front and rear of the balaclava, while optimized stitching around the eye opening helps minimize pressure points beneath a close-fitting racing helmet. FIA 8856-2018 approved SFI 3.3 approved Breathable moisture-wicking construction Body-mapped knit structure Optimized eye-opening stitching Thin profile for comfortable helmet fit Sparco RW-7 Nomex Shirt The Sparco RW-7 Nomex Shirt uses a soft stretchable construction with seamless sides and raglan sleeves to improve mobility and comfort underneath a racing suit. The fabric is designed to fit close to the body while remaining flexible in the driving position. Sparco X-Cool treatment helps draw heat away from the skin and provides an antibacterial effect for improved comfort during long track sessions. FIA 8856-2018 approved Soft stretchable Nomex construction Seamless sides Raglan sleeves for improved movement Minimal external seams Sparco X-Cool treatment Sparco RW-7 Nomex Pants The Sparco RW-7 Nomex Pants provide lightweight fire-resistant lower-body protection with a close-fitting stretch construction designed specifically for motorsport use. X-Cool technology helps regulate temperature, while reinforced areas and minimal seams provide a balance of comfort, protection, and durability during demanding driving conditions. FIA 8856-2018 approved Soft stretchable Nomex construction Designed for comfort in the driving position Minimal external seams X-Cool temperature-management technology Antibacterial treatment Manufacturer part number: 001781P Sparco RW-7 Nomex Socks Sparco RW-7 Nomex Socks complete the underlayer system with lightweight fire-resistant protection for the feet and lower legs. Their soft construction and X-Cool treatment help improve comfort while maintaining a close fit inside racing shoes. FIA 8856-2018 approved Soft and stretchable Nomex construction Minimal external seams X-Cool treatment Antibacterial properties Available in black or white European shoe sizing Manufacturer part number: 001522 Sizing Chart Sparco RW-7 shirts and pants use Sparco underlayer sizing. The soft stretchable fabric is designed to fit close to the body. Drivers who prefer a looser fit may want to select one size larger. Sparco RW-7 socks are sized according to European shoe sizes. Why Choose the Sparco RW-7 Bundle? The RW-7 system is a strong choice for drivers who want FIA-certified protection with more technical heat-management features than a basic entry-level underlayer. The combination of X-Cool treatment, stretch construction, moisture management, and minimal seams makes the RW-7 especially well suited for long track sessions, endurance racing, and hot cockpit conditions. Frequently Asked Questions Q: Is the Sparco RW-7 bundle FIA approved?A: Yes. The RW-7 balaclava, shirt, pants, and socks are FIA 8856-2018 approved. Q: Is the RW-7 balaclava SFI approved?A: Yes. The Sparco RW-7 Delta Balaclava is also SFI 3.3 approved. Q: What does Sparco X-Cool do?A: X-Cool treatment is designed to help draw heat away from the body surface while also providing an antibacterial effect. Q: Is the RW-7 a compression fit?A: The shirt and pants are designed to fit close to the body because of their soft stretchable fabric. If you prefer a looser fit, consider selecting one size larger. Q: Can I select different sizes for each part of the bundle?A: Yes. Shirt, pants, balaclava, and sock options can be selected independently when configuring the package. Q: How are the RW-7 socks sized?A: Sparco RW-7 socks use European shoe sizing. Refer to the Sparco sock size chart above to find the correct size.
Sparco RW-4 Nomex racing underwear bundle with balaclava, shirt, pants and socks FIA 8856-2018 certified
Sparco RW-4 Nomex Racing Underwear Bundle | FIA 8856-2018 $633.00
Sparco RW-4 FIA Racing Underwear Package The Sparco RW-4 Nomex Racing Underwear Bundle combines the complete RW-4 fire-resistant underlayer system into one convenient package. It includes the Sparco RW-4 balaclava, long-sleeve shirt, pants, and Nomex racing socks for complete head-to-toe protection underneath your racing suit. Designed for drivers who want dependable FIA-certified protection with a comfortable regular fit, the RW-4 collection uses a soft-touch interlock fabric that is lightweight, breathable, and comfortable enough for long track sessions. Every component in this package is FIA 8856-2018 approved. What's Included 1x Sparco RW-4 Nomex Balaclava – FIA 8856-2018 approved fire-resistant head and neck protection 1x Sparco RW-4 Nomex Shirt – FIA 8856-2018 approved long-sleeve racing underlayer 1x Sparco RW-4 Nomex Pants – FIA 8856-2018 approved fire-resistant racing underwear 1x Sparco RW-4 Nomex Socks – FIA 8856-2018 approved mid-calf racing socks Sparco RW-4 Underlayer Bundle Features FIA Homologation: FIA 8856-2018 approved components Complete Underlayer System: Includes balaclava, shirt, pants, and socks Soft-Touch Interlock Fabric: Designed for excellent next-to-skin comfort Regular Fit: Comfortable alternative to compression-style racing underwear Lightweight Construction: Helps reduce unnecessary bulk underneath a racing suit Breathable Material: Designed for comfort during demanding track sessions Fire-Resistant Protection: Nomex construction provides protection for competitive motorsport use Anti-Static Socks: RW-4 socks combine fire-resistant Nomex construction with anti-static properties Coordinated Sparco System: Matching RW-4 components designed to work together as a complete racing base layer Sparco RW-4 Nomex Balaclava The Sparco RW-4 Nomex Balaclava provides FIA-certified fire-resistant protection while maintaining a soft, breathable feel underneath a racing helmet. The regular-fit construction is designed for long-term comfort without excessive compression. FIA 8856-2018 approved Soft-touch interlock fabric Regular fit Lightweight and breathable Designed for extended use underneath a racing helmet Sparco RW-4 Nomex Shirt The Sparco RW-4 Nomex Shirt is a comfortable long-sleeve racing base layer made from soft-touch interlock fabric. Unlike compression-style underlayers, the RW-4 uses a regular fit that provides excellent comfort and freedom of movement underneath a racing suit. FIA 8856-2018 approved Soft and comfortable interlock construction Regular fit Long-sleeve design Sizes Small through XX-Large Manufacturer part number: 001782MBI Sparco RW-4 Nomex Pants The Sparco RW-4 Nomex Pants provide lightweight lower-body fire protection with the same soft-touch interlock fabric used throughout the RW-4 collection. Their regular-fit design allows comfortable movement inside the cockpit while avoiding the restrictive feel of compression-style underwear. FIA 8856-2018 approved Soft-touch interlock material Regular fit Lightweight and breathable construction Sizes Small through XX-Large Sparco RW-4 Nomex Socks Sparco RW-4 Nomex Socks complete the underlayer system with lightweight fire-resistant protection for the feet and lower legs. The mid-calf socks use the same soft-touch interlock construction as the rest of the RW-4 range for excellent comfort inside racing shoes. FIA 8856-2018 approved Fire-retardant Nomex construction Anti-static properties Lightweight and breathable Soft-touch interlock fabric Mid-calf length European shoe sizing Manufacturer part number: 001516BI Why Choose the Sparco RW-4 Bundle? The RW-4 collection is an excellent choice for drivers who want complete FIA 8856-2018 protection without moving into a tight compression-style underlayer. Its soft interlock fabric and regular fit make the RW-4 particularly well suited for track days, club racing, endurance events, and drivers who prioritize comfort during long periods in the car. Purchasing the complete package also makes it easier to build a coordinated Sparco underlayer system without selecting each component separately. Sizing Chart Sparco RW-4 shirts and pants use Sparco racing underwear sizing. Select the appropriate size for the shirt and pants independently when configuring your bundle. Sparco RW-4 socks are sized according to European shoe sizes. Use the chart below to convert your normal shoe size. Frequently Asked Questions Q: Is the entire Sparco RW-4 bundle FIA approved?A: Yes. The RW-4 balaclava, shirt, pants, and socks are all FIA 8856-2018 approved. Q: Is the Sparco RW-4 a compression-fit underlayer?A: No. The RW-4 shirt and pants use a regular fit, making them a good choice for drivers who prefer a less restrictive feel underneath their racing suit. Q: What comes in the RW-4 bundle?A: The package includes one RW-4 balaclava, one RW-4 long-sleeve shirt, one pair of RW-4 pants, and one pair of RW-4 Nomex socks. Q: Can I select different sizes for the shirt and pants?A: Yes. Each bundle component can be configured independently so you can select the appropriate size for each item. Q: How are the Sparco RW-4 socks sized?A: RW-4 socks use European shoe sizing. Refer to the Sparco shoe size chart above to determine the correct size. Q: Who is the RW-4 bundle best suited for?A: The RW-4 is ideal for track-day drivers, club racers, and competitive drivers who want FIA-certified fire protection with a comfortable regular-fit underlayer rather than a compression-style system.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa