GiroDisc Porsche Caliper Stud Kit 2 BCS-02
$232.00
GiroDisc Porsche Caliper Stud Kit 2 – BCS-02
The GiroDisc Porsche Caliper Stud Kit 2 (BCS-02) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. Ceramic brake equipment and vehicle generation affect selection. BCS-02 is a front kit in these applications.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-02 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-02 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified factory caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 2 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-02
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Front
Mounting Configuration: Specified factory caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-02
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-02 Porsche Vehicle Fitment (Front)
981 Cayman GT4
991 GT3/GT3 RS and GT2 RS
997 Turbo with PCCB
997.1 GT3/RS with PCCB
997.2 GT3/RS with iron or PCCB
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-02 is intended for specified factory caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 2 FAQs
What does the GiroDisc BCS-02 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-02 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-02 installed?
Its installation location is front. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-02 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-02 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-02 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 1 BCS-01
$232.00
GiroDisc Porsche Caliper Stud Kit 1 – BCS-01
The GiroDisc Porsche Caliper Stud Kit 1 (BCS-01) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. For the listed earlier front applications, BCS-01 is the spacer configuration. Do not substitute it for the factory-position kit.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-01 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-01 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: GiroDisc spacer applications and specified factory configurations
GiroDisc Porsche Caliper Stud Kit 1 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-01
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Front or rear, depending on application
Mounting Configuration: GiroDisc spacer applications and specified factory configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-01
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-01 Porsche Vehicle Fitment
Front (with specified GiroDisc spacers):
996 Carrera 4S, Turbo and early GT3
997 Carrera S/4S/GTS
991.1 Carrera S/4S/GTS
981 base Cayman/Boxster & Boxster Spyder
Rear:
992 Carrera S/4S with factory iron brakes
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-01 is intended for girodisc spacer applications and specified factory configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 1 FAQs
What does the GiroDisc BCS-01 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-01 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-01 installed?
Its installation location is front or rear, depending on application. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-01 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-01 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-01 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
Cobalt Racing D608 Brake Pads (Rear)
$462.00
Cobalt D608 Racing Brake Pad
Cobalt D608 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Ferrari
348 GTB. GTS, Spider
89 - 94
X
X
Ferrari
355 Berlinetta. GTS
94 - 99
X
X
Ferrari
456 GT
94 - 96
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
575M Maranello
02 - 06
X
Ferrari
F512M & 550
X
Maserati
Spyder 4.2 & Coupe 3.2
02 - 07
X
Porsche
911 3.3 SC Turbo / Turbo S
77 - 90
X
X
Porsche
928 5.4 GTS 32V
91 - 95
X
Porsche
928 S & S4 & GT
85 - 95
X
Porsche
944 2.5 Turbo
87 - 91
X
Porsche
944 2.7 & 3.0 S2
88 - 91
X
X
Porsche
964 3.3 Turbo & Turbo S
88 - 91
X
Porsche
964 3.3/3.6 Turbo & Turbo S
91 - 93
X
Porsche
964 3.6 C4
88 - 94
X
X
Porsche
964 3.6 Carrera RS
91 - 93
X
Porsche
964 C2 3.6
91 - 94
X
X
Porsche
968 3.0 Coupe
91 - 95
X
X
Porsche
968 3.0 Coupe Sport
91 - 95
X
Porsche
968 3.0 Coupe Turbo S
93 - 95
X
Porsche
993 3.6 Carrera & C4
93 - 97
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing D608 Brake Pads (Front)
$462.00
Cobalt D608 Racing Brake Pad
Cobalt D608 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Ferrari
348 GTB. GTS, Spider
89 - 94
X
X
Ferrari
355 Berlinetta. GTS
94 - 99
X
X
Ferrari
456 GT
94 - 96
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
575M Maranello
02 - 06
X
Ferrari
F512M & 550
X
Maserati
Spyder 4.2 & Coupe 3.2
02 - 07
X
Porsche
911 3.3 SC Turbo / Turbo S
77 - 90
X
X
Porsche
928 5.4 GTS 32V
91 - 95
X
Porsche
928 S & S4 & GT
85 - 95
X
Porsche
944 2.5 Turbo
87 - 91
X
Porsche
944 2.7 & 3.0 S2
88 - 91
X
X
Porsche
964 3.3 Turbo & Turbo S
88 - 91
X
Porsche
964 3.3/3.6 Turbo & Turbo S
91 - 93
X
Porsche
964 3.6 C4
88 - 94
X
X
Porsche
964 3.6 Carrera RS
91 - 93
X
Porsche
964 C2 3.6
91 - 94
X
X
Porsche
968 3.0 Coupe
91 - 95
X
X
Porsche
968 3.0 Coupe Sport
91 - 95
X
Porsche
968 3.0 Coupe Turbo S
93 - 95
X
Porsche
993 3.6 Carrera & C4
93 - 97
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt D810 Brake Pads (Rear)
$622.00
Cobalt D810 Brake Pads
Cobalt D810 Brake Pad Fitment Guide (FMSI D810)
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Race Technologies P1010 brake pad features a wide, low-profile backing plate designed for compatible high-performance brake calipers. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth, the P1010 combines a curved friction surface with a centrally divided pad face for demanding performance driving and motorsport applications.
Competition Motorsport offers the Race Technologies P1010 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Choosing the correct P1010 pad shape and compound is essential for proper fitment and predictable braking performance.
Cobalt D810 Brake Pad Specifications
Pad Shape: D810
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Available Compounds: XR1-XR5
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
Â
Cobalt D810 Brake Pads (Front)
$622.00
Cobalt D810 Brake Pads
Cobalt D810 Brake Pad Fitment Guide (FMSI D810)
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Race Technologies P1010 brake pad features a wide, low-profile backing plate designed for compatible high-performance brake calipers. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth, the P1010 combines a curved friction surface with a centrally divided pad face for demanding performance driving and motorsport applications.
Competition Motorsport offers the Race Technologies P1010 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Choosing the correct P1010 pad shape and compound is essential for proper fitment and predictable braking performance.
Cobalt D810 Brake Pad Specifications
Pad Shape: D810
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Available Compounds: XR1-XR5
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
Â
Performance Friction PFC 7780 Brake Pads (Rear)
$602.00
Performance Friction PFC 7780 Brake PadsÂ
Performance Friction PFC 7780 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Performance Friction PFC 7780 brake pad delivers race-proven braking performance for drivers who demand consistent stopping power, precise modulation, and confidence under repeated heavy braking. Featuring a 131.5 mm wide backing plate, 68 mm overall height, 50.5 mm friction material depth, and 18 mm pad thickness, the PFC 7780 is designed for compatible high-performance brake calipers used in HPDE, track days, club racing, and motorsport competition.
Available from Competition Motorsport in PFC 01 and PFC 08 racing compounds, the 7780 allows drivers to select the braking characteristics that best match their vehicle, driving style, and competition requirements. Whether you prioritize aggressive initial bite and responsive braking or consistent endurance performance with excellent modulation, Performance Friction offers two proven compound options for demanding track applications.
PFC Brake Compound PerformanceÂ
PFC 7780 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 7780
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Pad Thickness: 18 mm
Available Compounds: PFC 01 and PFC 08
Intended Use: HPDE, track days, club racing, sprint racing, and endurance racing
The PFC 7780 features a distinctive backing plate with two upper retaining openings, a curved upper friction surface, a centrally divided pad face, and a shallow concave lower edge. Its specific mounting geometry makes accurate pad identification essential when replacing existing racing brake pads or selecting friction materials for performance calipers.
Always compare the 7780 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
PFC 01 Racing Brake Compound – Aggressive Bite and Responsive Braking
The Performance Friction 01 compound is a competition-focused racing friction material known for its aggressive initial bite, strong brake torque, and responsive pedal feel. Designed for demanding racing environments, PFC 01 provides the immediate braking response and precise control that experienced drivers expect during high-intensity track sessions.
With strong initial bite and consistent braking characteristics, the PFC 01 compound is particularly well suited to sprint racing, club racing, and advanced track-day applications where rapid deceleration and confident brake modulation are essential.
For drivers who prefer a more aggressive initial braking response and strong overall stopping power, PFC 01 is an excellent choice.
PFC 08 Racing Brake Compound – Endurance Performance and Modulation
The Performance Friction 08 compound is a proven endurance racing friction material developed to deliver predictable braking response, exceptional modulation, and excellent pad and rotor wear characteristics during extended competition.
PFC 08 features a smoother initial bite than the more aggressive 01 compound, making it particularly attractive to drivers who prioritize progressive pedal feel, precise brake control, and consistency over long track sessions.
Its durability and controlled friction characteristics make PFC 08 a popular choice for endurance racing, club racing, advanced HPDE, and track-day vehicles subjected to repeated high-temperature braking.
PFC 01 vs. PFC 08 – Which Racing Brake Compound Should You Choose?
Both PFC 01 and PFC 08 are dedicated racing compounds, but they offer different braking characteristics to suit individual driving styles and competition requirements.
PFC 01: Aggressive initial bite, strong brake torque, and responsive braking characteristics. Ideal for drivers who prefer immediate brake response and demanding sprint racing applications.
PFC 08: More progressive initial bite, excellent modulation, and strong pad and rotor wear characteristics. Ideal for endurance racing, club racing, and drivers seeking consistent braking performance over extended sessions.
For shorter sprint races and drivers who prefer aggressive initial bite, PFC 01 is often the preferred choice. For endurance racing, longer track sessions, and drivers who prioritize progressive modulation and durability, PFC 08 is an excellent alternative.
Both compounds are intended primarily for motorsport use. Brake noise, dust, and reduced performance outside the intended operating temperature range may occur during street driving.
Why Choose Performance Friction PFC 7780 Brake Pads?
Performance Friction has established a strong reputation in professional motorsport through the development of advanced racing brake friction materials and braking systems. The PFC 7780 pad shape combines precise backing plate geometry with two competition-proven friction compounds, allowing drivers to tailor braking performance to their vehicle and racing requirements.
Race-proven Performance Friction braking technology
131.5 mm overall width and 68 mm overall height
50.5 mm friction material depth
18 mm nominal pad thickness
Choice of aggressive PFC 01 or endurance-focused PFC 08 racing compounds
PFC 7780 Brake Pad Fitment and Compatibility
The Performance Friction 7780 brake pad is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 131.5 mm overall width, 68 mm overall height, 50.5 mm friction material depth, 18 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Frequently Asked Questions About PFC 7780 Brake Pads
What is the difference between PFC 01 and PFC 08?
PFC 01 provides a more aggressive initial bite and responsive braking feel, while PFC 08 emphasizes progressive modulation, consistent endurance performance, and excellent wear characteristics.
Are PFC 7780 brake pads suitable for track days?
Yes. Both 01 and 08 are racing compounds suitable for demanding track applications when matched to the vehicle, brake system, and operating temperatures. PFC 08 is particularly attractive for drivers seeking predictable modulation and durability during extended sessions.
Can PFC 7780 brake pads be used on the street?
PFC 01 and 08 are competition-oriented friction materials primarily intended for track use. They may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
How do I confirm that PFC 7780 pads fit my brake calipers?
Compare your existing brake pads with the PFC 7780 technical drawing. Confirm the 131.5 mm width, 68 mm height, 50.5 mm friction material depth, 18 mm thickness, and retaining-hole geometry. Contact Competition Motorsport if you need assistance confirming compatibility.
Buy PFC 7780 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, premium motorsport braking components, and professional racing equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Select your preferred PFC 7780 compound, 01 or 08, above and prepare your braking system for your next track event. If you're unsure which compound is best for your vehicle, contact our motorsports specialists for assistance with brake pad selection and fitment.
Performance Friction PFC 7780 Brake Pads (Front)
$602.00
Performance Friction PFC 7780 Brake PadsÂ
Performance Friction PFC 7780 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Performance Friction PFC 7780 brake pad delivers race-proven braking performance for drivers who demand consistent stopping power, precise modulation, and confidence under repeated heavy braking. Featuring a 131.5 mm wide backing plate, 68 mm overall height, 50.5 mm friction material depth, and 18 mm pad thickness, the PFC 7780 is designed for compatible high-performance brake calipers used in HPDE, track days, club racing, and motorsport competition.
Available from Competition Motorsport in PFC 01 and PFC 08 racing compounds, the 7780 allows drivers to select the braking characteristics that best match their vehicle, driving style, and competition requirements. Whether you prioritize aggressive initial bite and responsive braking or consistent endurance performance with excellent modulation, Performance Friction offers two proven compound options for demanding track applications.
PFC Brake Compound PerformanceÂ
PFC 7780 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 7780
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Pad Thickness: 18 mm
Available Compounds: PFC 01 and PFC 08
Intended Use: HPDE, track days, club racing, sprint racing, and endurance racing
The PFC 7780 features a distinctive backing plate with two upper retaining openings, a curved upper friction surface, a centrally divided pad face, and a shallow concave lower edge. Its specific mounting geometry makes accurate pad identification essential when replacing existing racing brake pads or selecting friction materials for performance calipers.
Always compare the 7780 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
PFC 01 Racing Brake Compound – Aggressive Bite and Responsive Braking
The Performance Friction 01 compound is a competition-focused racing friction material known for its aggressive initial bite, strong brake torque, and responsive pedal feel. Designed for demanding racing environments, PFC 01 provides the immediate braking response and precise control that experienced drivers expect during high-intensity track sessions.
With strong initial bite and consistent braking characteristics, the PFC 01 compound is particularly well suited to sprint racing, club racing, and advanced track-day applications where rapid deceleration and confident brake modulation are essential.
For drivers who prefer a more aggressive initial braking response and strong overall stopping power, PFC 01 is an excellent choice.
PFC 08 Racing Brake Compound – Endurance Performance and Modulation
The Performance Friction 08 compound is a proven endurance racing friction material developed to deliver predictable braking response, exceptional modulation, and excellent pad and rotor wear characteristics during extended competition.
PFC 08 features a smoother initial bite than the more aggressive 01 compound, making it particularly attractive to drivers who prioritize progressive pedal feel, precise brake control, and consistency over long track sessions.
Its durability and controlled friction characteristics make PFC 08 a popular choice for endurance racing, club racing, advanced HPDE, and track-day vehicles subjected to repeated high-temperature braking.
PFC 01 vs. PFC 08 – Which Racing Brake Compound Should You Choose?
Both PFC 01 and PFC 08 are dedicated racing compounds, but they offer different braking characteristics to suit individual driving styles and competition requirements.
PFC 01: Aggressive initial bite, strong brake torque, and responsive braking characteristics. Ideal for drivers who prefer immediate brake response and demanding sprint racing applications.
PFC 08: More progressive initial bite, excellent modulation, and strong pad and rotor wear characteristics. Ideal for endurance racing, club racing, and drivers seeking consistent braking performance over extended sessions.
For shorter sprint races and drivers who prefer aggressive initial bite, PFC 01 is often the preferred choice. For endurance racing, longer track sessions, and drivers who prioritize progressive modulation and durability, PFC 08 is an excellent alternative.
Both compounds are intended primarily for motorsport use. Brake noise, dust, and reduced performance outside the intended operating temperature range may occur during street driving.
Why Choose Performance Friction PFC 7780 Brake Pads?
Performance Friction has established a strong reputation in professional motorsport through the development of advanced racing brake friction materials and braking systems. The PFC 7780 pad shape combines precise backing plate geometry with two competition-proven friction compounds, allowing drivers to tailor braking performance to their vehicle and racing requirements.
Race-proven Performance Friction braking technology
131.5 mm overall width and 68 mm overall height
50.5 mm friction material depth
18 mm nominal pad thickness
Choice of aggressive PFC 01 or endurance-focused PFC 08 racing compounds
PFC 7780 Brake Pad Fitment and Compatibility
The Performance Friction 7780 brake pad is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 131.5 mm overall width, 68 mm overall height, 50.5 mm friction material depth, 18 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Frequently Asked Questions About PFC 7780 Brake Pads
What is the difference between PFC 01 and PFC 08?
PFC 01 provides a more aggressive initial bite and responsive braking feel, while PFC 08 emphasizes progressive modulation, consistent endurance performance, and excellent wear characteristics.
Are PFC 7780 brake pads suitable for track days?
Yes. Both 01 and 08 are racing compounds suitable for demanding track applications when matched to the vehicle, brake system, and operating temperatures. PFC 08 is particularly attractive for drivers seeking predictable modulation and durability during extended sessions.
Can PFC 7780 brake pads be used on the street?
PFC 01 and 08 are competition-oriented friction materials primarily intended for track use. They may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
How do I confirm that PFC 7780 pads fit my brake calipers?
Compare your existing brake pads with the PFC 7780 technical drawing. Confirm the 131.5 mm width, 68 mm height, 50.5 mm friction material depth, 18 mm thickness, and retaining-hole geometry. Contact Competition Motorsport if you need assistance confirming compatibility.
Buy PFC 7780 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, premium motorsport braking components, and professional racing equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Select your preferred PFC 7780 compound, 01 or 08, above and prepare your braking system for your next track event. If you're unsure which compound is best for your vehicle, contact our motorsports specialists for assistance with brake pad selection and fitment.
CMS Performance Ultimate Race Seat Mounting Kit for Chevrolet Camaro Gen 5
from $578.00
CMS Performance Ultimate Race Seat Mounting Kit
This Kit Fits the Following Vehicles:
Chevrolet Camaro 5th Generation (2010-2015 All)
Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Camaro Motorsports Enthusiasts!
Are you a Chevy Camaro racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your Chevy Camaro on the race track is adding a dedicated racing seat.
CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your Chevrolet Camaro. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need!
American Engineering for Camaro Excellence
The CMS Performance Ultimate Race Seat Mounting Kit is precision-engineered, tailor-made to fit a variety of race seats safely and securely in your Camaro. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Camaros. Let CMS Performance help you unlock the full potential of your high-performance Camaro on the race track.
Custom Powder Coat to Match Your Camaro
The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable black wrinkle-finish powder coat. CMS Performance can also custom powder-coat your kit in just about any Chevrolet Camaro OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the Camaro color you want in your Order Notes at check-out.1
See Assembly Instructions Here
CMS Performance Ultimate Race Seat Mounting Kit Includes:
Mounting base w/ integrated sub strap bar (bolts securely to factory Chevy Camaro seat mounting holes)
Two steel side-mount race seat brackets
All necessary hardware (Grade 8)
Optional: high-performance race seat slider
Key Features of This Kit
Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your Chevy Camaro.
Fully Integrated: This CMS Performance kit includes everything you need to install a racing seat in your Chevy Camaro. No mixing-and-matching, so you can spend less time installing and more time racing.
Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity.
Customization: Tailor your installation to perfection with multiple options including adding racing sliders and custom powder-coat colors.1
Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races.
Quick and Easy Installation: The CMS Performance Ultimate Race Seat Mounting Kit is engineered for straightforward installation and precise fitment.
Complete Your Race Package: CMS Performance roll bar and race seats are available separately.
1 The Recaro seat slider can not be powder coated and comes only in satin black.
The Ultimate Race Seat Mounting Kit is shown with optional Recaro seat slider.
CMS HANS Helmet Post Anchors | FIA Approved
$102.00
Competition Motorsport HANS Helmet Post Anchors
Secure your head and neck restraint system with the CMS HANS Helmet Post Anchors. Designed for racing helmets equipped with factory-installed M6 threaded inserts, these FIA-approved helmet posts provide the attachment points needed to connect compatible HANS and Stand21 head and neck restraint systems.
Featuring a durable blue anodized finish, precision-machined metal construction, and distinctive CMS branding, these helmet anchors deliver professional racing functionality and a clean motorsport appearance. Each kit includes two helmet post anchors for installation on both sides of your racing helmet.
CMS HANS Helmet Post Anchor Features
FIA Approved: Features FIA 8858-2010 markings for motorsport safety applications.
Head and Neck Restraint Compatibility: Designed for use with compatible HANS and Stand21 head and neck restraint systems.
M6 Threaded Installation: Attaches to compatible racing helmets with factory-installed M6 threaded mounting inserts.
Blue Anodized Finish: Distinctive blue finish provides a professional racing appearance.
Precision-Machined Construction: Engineered for secure attachment and dependable motorsport use.
CMS Branding: Custom-branded design provides a distinctive appearance.
Complete Pair: Includes two helmet post anchors, one for each side of the helmet.
Helmet Compatibility and Installation
CMS HANS Helmet Post Anchors are designed for racing helmets equipped with compatible M6 threaded mounting inserts. These inserts are commonly found on select motorsport helmets manufactured by brands such as:
Stilo
Bell Racing Helmets
Arai
Schuberth
Other compatible motorsport helmet manufacturers
Important: Compatibility depends on the specific helmet model, its factory-installed mounting hardware, and the head and neck restraint system being used. Verify compatibility with your helmet manufacturer before installation.
Installation involves securing the anchors into the designated M6 threaded mounting points on the helmet. Always follow the helmet and restraint manufacturers' installation instructions, including any required hardware and tightening specifications.
CMS HANS Helmet Post Anchor Specifications
Product: HANS Helmet Post Anchors
Manufacturer: Stilo
Manufacturer Part Number: CMS.HANS.POST.ANCHOR.B
Color: Blue
Mounting Thread: M6
FIA Marking: FIA 8858-2010
Quantity: 2 Anchors Per Kit
Nut Washers Included: No
Application: Compatible racing helmets and head and neck restraint systems
Frequently Asked Questions
Are CMS HANS Helmet Post Anchors FIA approved?
Yes. These helmet post anchors are listed as FIA approved and feature FIA 8858-2010 markings.
Will these anchors fit my racing helmet?
These anchors are designed for compatible racing helmets equipped with M6 threaded mounting inserts. Confirm the specific helmet model and mounting requirements before purchasing.
Are these compatible with HANS and Stand21 head and neck restraints?
Yes. They are intended for use with compatible HANS and Stand21 restraint systems. Verify the required post-anchor configuration for your particular restraint.
How many helmet post anchors are included?
Each kit includes two helmet post anchors, providing one attachment point for each side of the helmet.
Can I install these anchors myself?
Installation should be performed according to the helmet and restraint manufacturers' instructions. Use the required hardware and specified torque settings. If you are unsure about compatibility or installation, consult an authorized helmet service provider.
Secure Your Head and Neck Restraint System
The CMS HANS Helmet Post Anchors offer a practical solution for drivers replacing existing anchors or completing a compatible racing helmet and head and neck restraint setup. With FIA-approved construction, blue anodized styling, and a convenient two-anchor kit, these mounting posts are designed to support a properly configured motorsport safety system.
OMP GT-EV Racing Helmet | Snell SA2025
$580.00
OMP GT-EV Racing Helmet Snell SA2025
The OMP GT-EV Racing Helmet Snell SA2025 is engineered for drivers competing in auto racing and karting who demand superior visibility, lightweight comfort, and advanced safety technology. Replacing the previous B2 VISION EV model, the GT-EV introduces updated safety enhancements, improved airflow management, and modern motorsport functionality for today’s competitive racing environments.
Advanced Full Face Helmet Designed for Modern Motorsport
Built with a lightweight composite shell and aggressive aerodynamic styling, the OMP GT-EV provides outstanding protection while minimizing fatigue during extended race sessions. Its enlarged eyeport improves peripheral visibility and comfortably accommodates drivers wearing glasses, making it an ideal solution for multiple racing disciplines.
Features
Snell SA2025 certified racing helmet
Lightweight composite shell construction
Extended eyeport for maximum visibility
Eyeglass-friendly helmet design
Direct flow forehead ventilation system
Upper and rear-facing chin bar vents for enhanced airflow
Advanced multi-density impact liner
Soft fire-retardant Nomex interior lining
Integrated channels for radio and hydration systems
Factory-installed M6 FHR/HANS anchor terminals
Suitable for auto racing and karting applications
Available in White and Matte Black finishes
Maximum Visibility with Extended Eyeport Design
The GT-EV helmet features an enlarged eyeport engineered to maximize driver visibility during competition. This wide opening enhances peripheral vision while providing additional comfort for racers using prescription eyewear or communication equipment.
Optimized Ventilation System
A sophisticated airflow management system includes forehead intake vents, upper chin bar ventilation, and rear-facing lower chin exhaust vents to maintain cooling airflow throughout the helmet. This ventilation setup helps reduce heat buildup and improve concentration during demanding racing conditions.
Race-Ready Safety and Comfort
The multi-density liner system is specifically engineered to absorb impact energy while maintaining a secure and comfortable fit. The fire-retardant Nomex interior adds critical flame resistance and long-session comfort for professional and amateur racers alike.
Integrated Communication and Hydration Compatibility
Integrated routing channels built into the face area allow seamless installation of drink tubes and radio communication systems, making the GT-EV ideal for endurance racing and advanced motorsports applications.
FAQs
What safety certification does the OMP GT-EV helmet carry?
The OMP GT-EV Racing Helmet is certified to the Snell SA2025 motorsports safety standard.
Is the GT-EV compatible with HANS devices?
Yes. The helmet includes integrated M6 terminals for approved FHR and HANS restraint systems.
Can drivers wear glasses with this helmet?
Yes. The extended eyeport design provides additional room and improved comfort for drivers wearing glasses.
Does the helmet support hydration and radio systems?
Yes. Integrated channels allow routing for drink tubes and communication equipment.
What racing applications is the GT-EV designed for?
The GT-EV is suitable for auto racing, karting, track day events, endurance racing, and multiple motorsports disciplines.
The OMP GT-EV Racing Helmet Snell SA2025 combines cutting-edge visibility, advanced ventilation, lightweight comfort, and professional-grade protection to deliver a premium motorsports helmet for serious racers. Discovery Parts proudly supplies authentic OMP safety equipment for drivers competing at every level.
Performance Friction 1395 Racing Brake Pads
$1,106.00
Performance Friction PFC 1395 Racing Brake Pads
Performance Friction PFC 1395 Racing Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Chevrolet
Camaro Z28 [Gen 5] [ceramic brakes]
2015 - 17
X
Chevrolet
Corvette C6 Brembo [ceramic brakes]
2009 - 13
X
Chevrolet
Corvette C6 Brembo [6-piston iron rotors]
2009 - 13
X
Chevrolet
Corvette C7 Z06 [ceramic brakes]
2015 +
X
Ferrari
430 Challenge [ceramic brakes]
2007-09
X
Ferrari
430 Scuderia [ceramic brakes]
2008 - 09
X
Ferrari
458 Italia [ceramic brakes]
2010 - 15
X
Ferrari
488 Challenge race car [ceramic brakes]
2016 - 23
X
Ferrari
599 GTB Fiorano [iron rotors]
2006 - 12
X
Ferrari
Several ceramic (CCM) brakes
X
McLaren
570S [ceramic brakes]
2015 +
X
McLaren
650S / Spyder [ceramic brakes]
2014 - 17
X
McLaren
675LT [ceramic brakes]
2015 +
X
McLaren
MP4-12C [ceramic brakes]
2011 - 14
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
XA5.71.xx 6-piston D85
16mm
8091
Â
The Performance Friction PFC 1395 racing brake pad is designed for compatible high-performance brake calipers used in demanding track and motorsport applications. Measuring 189.6 mm wide by 97 mm high, with an 85 mm friction material depth and 17 mm overall thickness, the PFC 1395 features a wide friction surface, distinctive retaining geometry, and two friction grooves.
Available at Competition Motorsport in PFC 11 and PFC 331 racing compounds, the 1395 pad shape gives drivers two different approaches to braking performance. Whether you prefer the smooth, progressive characteristics of Compound 11 or the ABS-friendly, high-initial-bite characteristics of Compound 331, selecting the right friction material is essential for consistent braking and driver confidence.
Performance Friction PFC 1395 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 1395
Overall Width: 189.6 mm
Overall Height: 97 mm
Friction Material Depth: 85 mm
Pad Thickness: 17 mm
Available Compounds: PFC 11 and PFC 331
Applications: Compatible motorsport brake calipers requiring the 1395 pad shape
PFC 11 Racing Compound – Smooth Bite and Progressive Braking
Performance Friction Compound 11 is a racing friction material developed for sprint and medium-distance competition. Known for its smooth initial bite and increasing friction characteristics as temperature rises, PFC 11 provides a progressive braking response for drivers who prioritize predictable pedal feel and precise modulation.
Compound 11 is well suited to competitive road racing, advanced HPDE, and demanding track applications where repeatable braking response is essential.
PFC 331 Racing Compound – High Initial Bite and ABS Compatibility
Performance Friction Compound 331 is a degressive racing brake compound developed primarily for front-axle applications. It combines strong initial bite with controlled friction characteristics, making it particularly attractive for racing vehicles equipped with sophisticated ABS systems.
Its degressive friction behavior is designed to support braking stability and control while offering favorable pad and rotor wear characteristics. PFC 331 is an excellent option for compatible front brake systems where ABS interaction and predictable high-performance braking are priorities.
PFC 11 vs. PFC 331 – Which Compound Should You Choose?
PFC 11: Smooth initial bite with friction that increases as temperature rises. Designed for sprint and medium-distance racing applications.
PFC 331: Strong initial bite with degressive friction behavior. Developed for front-axle racing applications, with an emphasis on ABS compatibility and low wear.
The ideal compound depends on vehicle weight, tire grip, brake balance, ABS calibration, rotor configuration, operating temperatures, and driving style. Contact Competition Motorsport for help selecting the correct PFC friction material.
Why Choose Performance Friction PFC 1395 Brake Pads?
Competition-focused Performance Friction braking technology
189.6 mm wide backing plate with distinctive retaining geometry
85 mm friction material depth
17 mm overall pad thickness
Available in PFC 11 and PFC 331 racing compounds
PFC 1395 Brake Pad Fitment and Compatibility
The Performance Friction 1395 pad shape is intended for compatible brake calipers requiring its specific backing plate geometry, retaining-hole locations, friction surface dimensions, and overall thickness.
Before ordering, verify the 189.6 mm width, 97 mm height, 85 mm friction material depth, and 17 mm thickness against your existing pads or the brake caliper manufacturer's technical specifications.
Vehicle make and model alone may not confirm fitment, especially when aftermarket racing calipers or optional performance brake systems are installed.
Buy PFC 1395 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, club racers, and competitive race teams.
Select your preferred PFC 1395 compound, 11 or 331, above. If you need assistance confirming pad shape compatibility or selecting the correct compound, contact our motorsports specialists before ordering.
Race Technologies P1401 Brake Pads (Front)
from $506.00
Race Technologies P1401 Brake Pads (Front)
Fitment Guide Race Technologies P1401 Brake Pads (Front) (FMSI D810)
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Race Technologies P1401 brake pad delivers a precision-fit friction solution for high-performance braking systems used in HPDE, track days, club racing, and motorsport competition. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth and 19 mm overall thickness, the P1401 features a distinctive backing plate profile and broad, curved friction surface designed for compatible performance brake calipers.
Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1401 allows drivers to select the braking characteristics that match their vehicle, driving style, and operating conditions. From high-temperature endurance racing to occasional track-day use, choosing the correct pad shape and friction compound is essential for consistent braking response and driver confidence.
Race Technologies P1401 Brake Pad Specifications
Pad Shape: P1401
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Pad Thickness: 19 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound
The P1401 features two upper retaining openings, a centrally divided friction surface, a gently arched upper friction edge, and a shallow concave lower profile. Its specific backing plate geometry makes accurate pad identification particularly important when replacing existing brake pads or selecting friction materials for aftermarket performance calipers.
Always compare the P1401 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking performance under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its consistent friction characteristics help drivers maintain confidence through repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 provides a versatile friction option for performance vehicles used across street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 offers an attractive alternative for drivers who want dependable performance without sacrificing everyday drivability.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where consistent braking response across a range of operating conditions is important.
RE10 vs. TS20: Which Brake Compound Should You Choose?
Both Race Technologies compounds are designed for performance braking, but each targets a different operating environment.
RE10: Best suited to dedicated track cars, sprint racing, club racing, and endurance competition where sustained high-temperature capability, consistent friction, and durability are priorities.
TS20: Best suited to performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking, predictable modulation, and more street-friendly characteristics are important.
Vehicle weight, tire grip, brake cooling, rotor configuration, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1401 Brake Pads?
The P1401 combines a 131.5 mm overall width with a 68 mm height, 50.5 mm friction material depth, and 19 mm thickness. Its distinctive backing plate and curved friction profile make it a specialized replacement option for compatible high-performance braking systems.
Distinctive P1401 backing plate geometry with two upper retaining openings
131.5 mm overall width and 68 mm overall height
50.5 mm friction material depth
19 mm overall pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1401 Brake Pad Fitment
The Race Technologies P1401 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 131.5 mm width, 68 mm height, 50.5 mm friction material depth, 19 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1401 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1401 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Race Technologies P1401 Brake Pads (Rear)
from $506.00
Race Technologies P1401 Brake Pads (Rear)
Fitment Guide for Race Technologies P1401 Brake Pads (FMSI D810)
Make
Model
Build (Year)
Front
Rear
Aston Martin
Vanquish
03 - 08
X
Audi
R8 4.2 and 5.2 FSI quattro
07 - 15
X
Audi
R8 4.2 and 5.2 FSI quattro [ceramic brakes]
09 - 15
X
Audi
R8 5.2 FSI quattro (2nd generation)
15 -
X
Audi
R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
15 -
X
Audi
R8 5.2 RWS (2nd generation)
18 -
X
BMW
M2 [F87] Competition
18 - 19
X
BMW
M4 [F82] [ceramic brakes]
14 -
X
Dodge
Viper Competition Coupe
03 -
X
X
Dodge
Viper SRT-10
04 - 08
X
X
Ferrari
512 Testarossa
92 - 96
X
Ferrari
F40 Street and race
87 - 92
X
X
Ferrari
F50
95 - 97
X
X
Lamborghini
Diablo [Brembo brakes]
92 - 99
X
X
Lamborghini
Gallardo
04 - 13
X
Lamborghini
Gallardo [ceramic brakes]
04 - 13
X
Lamborghini
Huracán [iron brakes]
14 -
X
Lamborghini
Huracán and Performance [ceramic brakes]
14 -
X
Lamborghini
Murciélago [non ceramic]
01 - 10
X
X
McLaren
F1 / shape rear on inquiry
92 - 98
X
Nissan
R35 GTR
08 -
X
Ligier
JS 2R (GT car. Brembo 6 piston front caliper)
19 -
X
BMW
M2 CS Racing [Permit B 365PS]
20 -
X
BMW
M2 CS Racing [Permit B 365PS]
2020
X
BMW
M3 [F80] [ceramic brakes]
14-18
X
CALIPERS
Make
Type
Remarks
Shape No.
Brembo
07.4865. GT (F-40) [caliper family B. H, P]
18mm
1287
Brembo
M4 in combination with 52mm radial disc swept depth
18mm
1287
Â
The Race Technologies P1401 brake pad delivers a precision-fit friction solution for high-performance braking systems used in HPDE, track days, club racing, and motorsport competition. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth and 19 mm overall thickness, the P1401 features a distinctive backing plate profile and broad, curved friction surface designed for compatible performance brake calipers.
Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1401 allows drivers to select the braking characteristics that match their vehicle, driving style, and operating conditions. From high-temperature endurance racing to occasional track-day use, choosing the correct pad shape and friction compound is essential for consistent braking response and driver confidence.
Race Technologies P1401 Brake Pad Specifications
Pad Shape: P1401
Overall Width: 131.5 mm
Overall Height: 68 mm
Friction Material Depth: 50.5 mm
Pad Thickness: 19 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound
The P1401 features two upper retaining openings, a centrally divided friction surface, a gently arched upper friction edge, and a shallow concave lower profile. Its specific backing plate geometry makes accurate pad identification particularly important when replacing existing brake pads or selecting friction materials for aftermarket performance calipers.
Always compare the P1401 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking performance under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its consistent friction characteristics help drivers maintain confidence through repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 provides a versatile friction option for performance vehicles used across street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 offers an attractive alternative for drivers who want dependable performance without sacrificing everyday drivability.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where consistent braking response across a range of operating conditions is important.
RE10 vs. TS20: Which Brake Compound Should You Choose?
Both Race Technologies compounds are designed for performance braking, but each targets a different operating environment.
RE10: Best suited to dedicated track cars, sprint racing, club racing, and endurance competition where sustained high-temperature capability, consistent friction, and durability are priorities.
TS20: Best suited to performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking, predictable modulation, and more street-friendly characteristics are important.
Vehicle weight, tire grip, brake cooling, rotor configuration, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1401 Brake Pads?
The P1401 combines a 131.5 mm overall width with a 68 mm height, 50.5 mm friction material depth, and 19 mm thickness. Its distinctive backing plate and curved friction profile make it a specialized replacement option for compatible high-performance braking systems.
Distinctive P1401 backing plate geometry with two upper retaining openings
131.5 mm overall width and 68 mm overall height
50.5 mm friction material depth
19 mm overall pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1401 Brake Pad Fitment
The Race Technologies P1401 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 131.5 mm width, 68 mm height, 50.5 mm friction material depth, 19 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1401 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1401 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Race Technologies P1206 Racing Brake Pads
from $506.00
Race Technologies P1206 / 1645 Racing Brake Pads
Race Technologies P1206 / 1645 Racing Brake Pads Fitment Guide
Make
Model
Year
Front
Rear
BMW
3 Series (G20/G21): M340i, M340d, 320i-330i M-Technik, 330e M-Technik, 316d-330d M-Technik
2019 +
  X
BMW
Z4 Roadster (G29): M40i sDrive, 20i-30i M-Technik
2019 +
  X
Toyota
Supra A90
2020 +
  X
Toyota
GR Supra
2020 +
  X
BMW
4 Series Coupe (G22./G23, G82): M440i, M440d, 420i-430i M-Technik, 420d-430d M-Technik
2020 +
  X
Â
Racing Technologies P1012 Brake Pads (Rear)
from $578.00
Racing Technologies P1012 Brake Pads (Rear)
Fitment Guide Racing Technologies P1012 Brake Pads (Rear)
(FMSI D1001)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
X
Ford
GT
04 - 06
X
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Â
The Race Technologies P1012 brake pad is a performance-focused pad shape engineered for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth and 15 mm pad thickness, the P1012 features a distinctive backing plate profile and curved friction surface designed for demanding braking applications.
Competition Motorsport offers the Race Technologies P1012 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and compound is essential for predictable, consistent braking performance.
Race Technologies P1012 Brake Pad Specifications
Pad Shape: P1012
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound
The P1012 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its specialized mounting geometry makes accurate shape identification important when replacing existing brake pads or selecting friction materials for compatible performance calipers.
Always compare the P1012 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1012 compound depends on the vehicle's intended use and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1012 Brake Pads?
The Race Technologies P1012 combines a 132 mm overall width with a 77 mm height, 62 mm friction material depth, and 15 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems.
Distinctive Race Technologies P1012 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1012 Brake Pad Fitment
The Race Technologies P1012 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, 15 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1012 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1012 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.