Technical dimension diagram of a Pagid 8222 brake pad showing a width of 163 mm, a height of 68.6 mm, and a pad depth of 53 mm.
Pagid Racing 8222 Brake Pads from $1,187.00
Pagid Racing Brake Pad Shape 8222 Pagid Racing shape 8222 brake pads are engineered for demanding motorsport and high-performance braking applications. 25 mm endurance/sprint racing pad shape for multiple AP Racing and Alcon six-piston calipers. Pagid Racing 8222 Brake Pad Fitment Guide Make / Caliper Type / Application Remarks Shape No. AP Racing CP6080 / CP6210 / CP6230 / CP6269 / CP9665 25 mm 8222 Alcon Applicable 6-piston racing calipers 25 mm 8222 KTM X-Bow GT4 – front 25 mm 8222 Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use. Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds. Pagid Racing 8222 RSL 1 Compound RSL 1 is a high-friction endurance compound with strong heat resistance, consistent friction across a wide temperature range, good modulation, and low pad and disc wear. Pagid Racing 8222 RSL 2 Compound RSL 2 is an endurance compound with medium-high friction, stable performance across a wide temperature range, and strong pad and disc life for applications with efficient brake cooling. Pagid Racing 8222 RST 1 Compound RST 1 is a very high-friction sprint and rally compound with strong initial bite, a progressive torque curve, and excellent fade resistance. It is well suited to heavy race cars and applications that require high brake torque. Pagid Racing 8222 RST 5 Compound RST 5 is a very high-friction sprint and rally compound designed for exceptional thermal stability, strong recovery, and high initial bite under severe competition use. Important Fitment Information Brake pad shape and caliper configuration must be verified before ordering. Vehicle applications can vary by model year, trim, brake package, rotor type, and caliper option. Compare the existing pad shape and dimensions with the listed specifications when necessary. PAGID 8222 BRAKE PAD FAQ What is the PAGID Racing shape number for this listing?The brake pad shape is 8222. Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application. Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems. How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Technical dimension diagram of a Pagid 4917 brake pad with measurements labeled 209.5 mm, 94 mm, and pad depth 70 mm on a white background.
Pagid 4917 Racing Brake Pads from $1,087.00
Pagid Racing Brake Pad 4917 Pagid Racing shape 4917 brake pads are engineered for demanding motorsport and high-performance braking applications. Large front pad shape used on select Porsche and Volkswagen high-performance brake systems. Pagid Racing 4917 Brake Pad Fitment Guide Make / Caliper Type / Application Remarks Shape No. Porsche Cayenne with applicable cast-iron/ceramic brake package – front 16 mm 4917 Porsche Panamera with applicable brake package – front 16 mm 4917 Volkswagen Touareg with applicable ceramic brake package – front 16 mm 4917 Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use. Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds. Pagid Racing 4917 RSL 29 Compound RSL 29 is a proven endurance and track-day compound with a medium friction level, excellent modulation, easy bedding, and long pad and disc life. Pagid Racing 4917 RSC 1 Compound RSC 1 is a medium-friction racing and track-day compound engineered for ceramic composite brake discs, with good all-around characteristics and disc-friendly behavior. Pagid Racing 4917 RSC 3 Compound RSC 3 is a ceramic-disc racing compound for demanding high-performance applications. Use only with compatible ceramic composite brake systems. Pagid Racing 4917 RSL 1 Compound RSL 1 is a high-friction endurance compound with strong heat resistance, consistent friction across a wide temperature range, good modulation, and low pad and disc wear. Important Fitment Information Brake pad shape and caliper configuration must be verified before ordering. Vehicle applications can vary by model year, trim, brake package, rotor type, and caliper option. Compare the existing pad shape and dimensions with the listed specifications when necessary. Pagid 4917 Brake Pad FAQ What is the PAGID Racing shape number for this listing?The brake pad shape is 4917. Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application. Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems. How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Technical dimension diagram of a Pagid 8061 brake pad showing a width of 189.6 mm, a height of 73 mm, and a pad depth of 48 mm.
Pagid 8061 Racing Brake Pads $1,145.00
Pagid Racing Brake Pad 8061 Pagid Racing shape 8061 brake pads are engineered for demanding motorsport and high-performance braking applications. Racing brake pad shape for the Brembo XA5.71.M2 six-piston caliper. Pagid Racing 8061 Brake Pad Fitment Guide Make / Caliper Type / Application Remarks Shape No. Brembo XA5.71.M2 6-piston D48 caliper 16.8 mm 8061 Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use. Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds. Pagid Racing 8061 RSL 29 Compound RSL 29 is a proven endurance and track-day compound with a medium friction level, excellent modulation, easy bedding, and long pad and disc life. Pagid 8061 Brake Pad FAQ What is the PAGID Racing shape number for this listing?The brake pad shape is 8061. Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application. Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems. How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Sabelt UI-600 Bundle consisting of a black long-sleeve compression shirt, black leggings, black knee-high socks, and a black balaclava mask, displayed against a dark racing-style background with Sabelt branding and certification text.
Sabelt UI-600 Underlayer Package (Regular) $905.00
Complete Sabelt UI-600 FIA Racing Underwear Package Get fully equipped with Sabelt's premium UI-600 racing underwear system in one complete package. The Sabelt UI-600 Nomex Racing Underwear Bundle combines the UI-600 slim-fit shirt, slim-fit pants, balaclava, and racing socks for complete FIA 8856-2018 certified fire-resistant protection underneath your racing suit. Developed for drivers who want maximum comfort without sacrificing protection, the UI-600 collection uses advanced stretch-fit construction and lightweight technical materials to provide exceptional breathability and freedom of movement. The nearly seamless design helps reduce pressure points and irritation during long sessions in the car. Sabelt combines Lenzing FR fiber with modacrylic and elastane to create an underlayer system that is lightweight, durable, moisture-managing, and highly elastic. The two-way stretch warp-knit construction follows the driver's movements while helping keep the body dry and comfortable during demanding track sessions, sprint races, and endurance events. What's Included 1x Sabelt UI-600 Slim-Fit Nomex Racing Shirt – FIA 8856-2018 certified lightweight racing underlayer 1x Sabelt UI-600 Nomex Racing Balaclava – FIA 8856-2018 certified stretch-fit head and neck protection 1x Sabelt UI-600 Slim-Fit Nomex Underlayer Pants – FIA 8856-2018 certified lightweight racing underwear 1x Sabelt UI-600 Nomex Racing Socks – FIA 8856-2018 certified fire-resistant racing socks Sabelt UI-600 Features FIA Certification: FIA 8856-2018 certified racing underwear system Complete Driver Underlayer: Includes shirt, pants, balaclava, and socks Stretch-Fit Construction: Designed to conform closely to the driver's body while maintaining freedom of movement Nearly Seamless Design: Helps minimize irritation and pressure points inside the racing suit Breathable Performance: Designed to help manage heat and moisture during demanding driving conditions Technical Materials: Lenzing FR fiber, modacrylic, and elastane construction Two-Way Stretch: Warp-knit fabric delivers excellent elasticity and mobility Lightweight: Built to reduce unnecessary bulk underneath a racing suit Durable: High wear resistance for repeated motorsport use Made in Italy: Premium Sabelt motorsport construction Why Buy the Complete UI-600 Bundle? A properly equipped driver needs more than just a racing suit. FIA-rated fire-resistant underwear provides an additional layer of protection between the driver and the suit while also improving comfort during long periods in the cockpit. This bundle makes it easy to build a complete Sabelt UI-600 underlayer system without purchasing each component separately. Choose the appropriate options for the shirt, pants, balaclava, and socks to create your complete racing underwear setup. Sizing The UI-600 shirt and pants use Sabelt racing underwear sizing. Select the appropriate size for each garment when configuring your bundle. Sabelt UI-600 racing socks are sized using European shoe sizes. Select the sock size that corresponds with your normal footwear size. FIA 8856-2018 Certified Racing Underwear The Sabelt UI-600 collection is designed for motorsport applications requiring FIA 8856-2018 certified fire-resistant driver apparel. Pair the complete UI-600 underwear system with an FIA-approved racing suit, gloves, shoes, and helmet for a professional motorsport safety setup.
A close-up of a red seat belt with a gray webbing strap and black metal buckle, shown against a plain white background.
Schroth Harness Adjuster Grips $27.00
Schroth Harness Adjuster Grips Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. Schroth Harness Adjuster Grips are customized high-impact plastic dowels that go through those loops, giving you a firmer grip when adjusting the belts. This is especially an advantage when temperatures are high and hands get sweaty, or when you're wearing racing gloves. Schroth Harness Adjuster Grips make it easier to get your harness belts as tight as they should be. Priced/sold as a set of four, enough for one street legal harness. Schroth Harness Adjuster Grip Details Manufacturer: Schroth Manufacturer part number: 00092 Material: high-impact plastic Color: black Contents: four harness adjuster grips Harness not included.
Fernando Alonso 2026 Aston Martin Bell HP77 1:2 scale F1 mini helmet three quarter view
Bell HP77 Fernando Alonso 1:2 Scale F1 Mini Helmet | Aston Martin 2026 F1 Season $247.00
Bell Fernando Alonso 2026 F1 Mini Helmet Celebrate Fernando Alonso’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Fernando Alonso Mini Helmet, a detailed collectible inspired by the helmet worn by Alonso while competing with the Aston Martin Formula One Team. This half-scale display helmet recreates the unmistakable look of Alonso’s full-size Bell HP77 in a compact collectible format. The 2026 design features his signature blue and yellow Asturias-inspired color scheme, Spanish flag accents, and sharp racing graphics associated with one of Formula 1’s most recognizable drivers. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible is designed for Formula 1 fans, Fernando Alonso supporters, motorsport memorabilia collectors, and anyone looking for a premium display piece for an office, shelf, desk, trophy room, or dedicated mini helmet collection. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Fernando Alonso 2026 Design: Inspired by Alonso’s 2026 Aston Martin Formula One Team helmet graphics. Asturias-Inspired Colors: Features Alonso’s signature blue and yellow color combination. Spanish Flag Accents: Red detailing pays tribute to Alonso’s Spanish heritage. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the appearance and character of a full-size racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, desks, shelves, trophy rooms, and mini helmet display cases. Presentation Box: Supplied in an individual cardboard presentation box featuring dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100556 Perfect for Formula 1 Collectors The Fernando Alonso 2026 mini helmet is an excellent addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the distinctive graphics and visual details associated with Alonso’s racing helmet. Whether displayed alongside other Formula 1 mini helmets, driver memorabilia, die-cast models, or Aston Martin collectibles, the Bell Fernando Alonso HP77 mini helmet makes a standout centerpiece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Fernando Alonso racing helmet?No. This is a 1:2 scale collectible replica of Fernando Alonso’s Bell HP77 Formula 1 helmet. Is this based on Fernando Alonso’s 2026 helmet?Yes. The graphics are inspired by Alonso’s 2026 Formula 1 season with the Aston Martin Formula One Team. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. Does it come with a display box?It is supplied in an individual cardboard presentation box with dedicated graphics. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).
Esteban Ocon 2026 Haas Bell HP77 1:2 scale F1 mini helmet three quarter view
Bell HP77 Esteban Ocon 1:2 Scale F1 Mini Helmet | Haas 2026 F1 Season $247.00
Bell Esteban Ocon 2026 F1 Mini Helmet Celebrate Esteban Ocon’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Esteban Ocon Mini Helmet, a detailed collectible inspired by the helmet worn by Ocon while competing with the Haas F1 Team. Ocon’s 2026 helmet design features a bold red finish with crisp white graphics and his signature Eiffel Tower motif across the top. The distinctive styling gives the helmet an unmistakable look while paying tribute to Ocon’s French identity. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible recreates the appearance of the full-size Bell HP77 in a compact half-scale format. It is an ideal display piece for Esteban Ocon fans, Haas F1 Team supporters, Formula 1 collectors, and motorsport enthusiasts. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Esteban Ocon 2026 Design: Inspired by Ocon’s distinctive red helmet graphics for the 2026 Formula 1 season. Bold Red and White Graphics: Features a striking red finish highlighted by crisp white detailing. Signature Eiffel Tower Motif: Includes one of the most recognizable elements associated with Ocon’s helmet designs. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the character and appearance of a full-size Formula 1 racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, shelves, desks, trophy rooms, and dedicated mini helmet display cases. Presentation Box: Supplied in an individual cardboard presentation box with dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100565 Perfect for Formula 1 Collectors The Esteban Ocon 2026 mini helmet is a distinctive addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the bold red graphics and signature design elements associated with Ocon’s race helmet. Whether displayed alongside other Formula 1 mini helmets, Haas F1 Team memorabilia, die-cast models, or Esteban Ocon collectibles, this Bell HP77 mini helmet makes a standout display piece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Esteban Ocon racing helmet?No. This is a 1:2 scale collectible replica inspired by Esteban Ocon’s Bell HP77 Formula 1 helmet. Is this based on Esteban Ocon’s 2026 helmet?Yes. The design is inspired by Ocon’s 2026 Formula 1 season with the Haas F1 Team. Does the helmet include Ocon’s Eiffel Tower design?Yes. The helmet features Ocon’s recognizable Eiffel Tower motif across the top as part of the 2026 graphics. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).
Chillout Systems IceBox Maintenance Formula 1.5L
Chillout Systems IceBox Maintenance Formula $59.00
Chillout Systems IceBox Maintenance Formula Keep your personal driver cooling system clean, lubricated, and performing at its best with Chillout Systems IceBox Maintenance Formula. Designed for the Chillout IceBox and other personal ice-based cooling systems, this specialized additive helps remove damaging residue and mineral buildup from critical internal components. Regular use lubricates the pump, valves, and cooling lines while helping inhibit corrosion throughout the system. Chillout Systems recommends adding the Maintenance Formula with every fill to maintain consistent cooling performance and help extend the life of your equipment. Key Features Helps remove residue and mineral buildup Lubricates the pump, valves, and cooling lines Helps inhibit corrosion inside the cooling system Supports consistent cooling-system performance Designed for the Chillout IceBox and other personal ice-based cooling systems Biodegradable formulation Resealable stand-up pouch for convenient storage and dispensing Contains 50.7 fl oz / 1.5 liters Recommended Use and Dosage Chillout Systems recommends using the IceBox Maintenance Formula every time the cooling system is filled. For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula per fill. Consistent use helps prevent mineral deposits and residue from restricting fluid flow or reducing cooling-system performance. Always follow the dosing instructions provided with your specific cooling system. Product Details Manufacturer: Chillout Systems Product: IceBox Maintenance Formula Part Number: CO-IBMF Container Size: 50.7 fl oz / 1.5 liters 17L IceBox Dosage: 2 oz per fill Application: Personal ice-based driver cooling systems Package: Resealable stand-up pouch with dispensing spout Storage and Handling Store the Maintenance Formula at room temperature and keep the pouch securely sealed when it is not in use. If the formula freezes, allow it to thaw completely to room temperature and shake the pouch before use. Frequently Asked Questions What does Chillout IceBox Maintenance Formula do?It helps remove residue and mineral buildup while lubricating the pump, valves, and cooling lines. It also helps inhibit corrosion inside the cooling system. How much Maintenance Formula should I use?For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula each time the system is filled. Should I use the formula with every fill?Yes. Chillout Systems recommends using the Maintenance Formula with every fill to help maintain cooling performance and protect internal components. Can it be used with other driver cooling systems?The formula is designed for the Chillout IceBox and other personal ice-based cooling systems. Follow the dosing instructions for your specific cooling system. How much formula is included?Each resealable pouch contains 50.7 fluid ounces, or 1.5 liters, of IceBox Maintenance Formula. What should I do if the formula freezes?Allow it to thaw completely to room temperature, then shake the pouch thoroughly before use.
Shrader Performance Rear Seat Delete Gen 5 Camaro (2010-2015)
Shrader Performance Rear Seat Delete Gen 5 Camaro (2010-2015) from $617.00
Shrader Performance Rear Seat Delete For Gen 5 Camaro The Shrader Performance rear seat delete for the 5th generation Chevy Camaro includes features like a fold-down rear panel for access through the trunk. Simply pop out four plastic pins and the rear panel folds down in seconds. Shrader Performance also built the support braces under the rear seat delete's lower panels to support over 100 lbs. of cargo! The lower panels can be lifted to provide access to a small out-of-sight storage space for things like small tools, a handbag, and anything else you don’t want visible. Or this space can be used to mount aftermarket components. Strong, Rigid, and Beautiful The foundation of Shrader Performance rear seat delete kits is a strong ABS plastic platform, formed for superior rigidity and strength and covered in high quality black carpet to match the factory OEM carpeting. They are the only manufacturer using this exclusive design, and all rear seat delete kits are made at their facility in North Carolina. Shrader puts sound-insulating padding on all carpeted panels as standard equipment to help subdue exterior road noise. Still, your Camaro will instantly shed about 20 lbs.! Installation is easy with the link to full instructions below. No removal of the interior side panels is needed. Simply remove your seats and a few components and install the new RSD panels. Completely reversible in minutes if you decide to put your seats back in. Shrader Performance Rear Seat Delete Fits: 2010 - 2015 Chevrolet Camaro Hardtop Coupe (not convertible) Can be easily modified to fit the CMS Performance Roll Bar for Gen 5 Camaro Installation Notes Tools required include basic metric sockets and a T50 Torx bit. Some cutting is involved to fit the rear seat delete around a CMS Performance Roll Bar, or you can choose to have your rear seat delete pre-cut to fit the CMS Performance Roll Bar. Click here for basic installation instructions
-21% sale
Sabelt Enduro Platinum 6 point Racing harness Image
Sabelt Enduro Platinum 2" FIA 8853-2016 Racing Harness $2,439.00 $3,049.00
Sabelt Enduro Platinum Full 2" Racing Harness The Sabelt Enduro Platinum Full 2" Racing Harness is Sabelt's flagship six-point endurance harness, engineered for professional GT, endurance, touring, and high-level track applications. Designed around rapid driver changes and compact race-car cockpits, the Enduro Platinum combines premium lightweight hardware with accessible adjustment and full 2-inch webbing. At the center of the system is Sabelt's lightweight billet-machined camlock, designed to help guide the belt tongues into position for quick, positive engagement. Integrated pull-down lap-belt adjusters remain close to the buckle, making them easier for the driver or crew to reach in deeply bolstered racing seats and confined cockpits. Full 2-inch shoulder belts provide an excellent interface with modern HANS and other frontal head restraint (FHR) devices, while compact hardware and high-visibility adjustment loops make the Enduro Platinum particularly well suited to multi-driver endurance racing. Sabelt Enduro Platinum Harness Features FIA 8853-2016 homologated six-point racing harness Designed specifically for GT and endurance racing Full 2-inch shoulder, lap, and anti-submarine belts Optimized for HANS and other FHR devices Lightweight billet-machined camlock Camlock geometry helps guide belt tongues into position Integrated pull-down lap-belt adjusters Lap adjusters positioned close to the buckle for easy access Compact center buckle and sub-belt arrangement Lightweight shoulder-belt adjusters High-visibility adjustment loops Shoulder-belt grip treatment helps maintain positioning on the FHR Shoulder-belt details help manage intercom wiring Available in Black, Blue, and Red Designed for Endurance Racing and Fast Driver Changes Harness ergonomics become especially important during endurance racing. Drivers may need to enter a hot, confined cockpit while managing a helmet, FHR device, radio cables, drink tube, window net, and steering-wheel clearance—all while the crew is working to secure the restraint system quickly and correctly. The Enduro Platinum addresses this with pull-down lap adjusters located close to the center buckle. Instead of placing the adjustment hardware farther toward the seat or chassis mounting point, the adjustment mechanism remains within easy reach of the driver or crew. This configuration helps make driver changes faster while allowing the lap belts to be positioned and tensioned consistently across the pelvis. Billet-Machined Endurance Camlock One of the defining features of the Enduro Platinum is its lightweight billet-machined camlock. The belt entry points are shaped to help guide the tongues into the buckle, making engagement easier when visibility is limited or the crew is working quickly during a pit stop. The compact buckle and integrated sub-belt arrangement also reduce unnecessary hardware around the driver's hips and lower torso—an important advantage in tightly packaged GT and endurance cockpits. Full 2-Inch FHR-Compatible Harness The Enduro Platinum uses full 2-inch shoulder belts designed to interface naturally with modern frontal head restraint systems. The narrower webbing sits cleanly on the belt-bearing surface of a HANS or comparable FHR device, while grip treatment in the shoulder area helps keep the belts properly positioned. The result is a compact, modern restraint configuration designed around the driver, racing seat, and FHR as a complete safety system. Sabelt Enduro Platinum Technical Specifications Specification Details Brand Sabelt Model Enduro Platinum Full 2" Configuration 6-Point FIA Homologation FIA 8853-2016 Shoulder Belt Width 2" Lap Belt Width 2" Sub-Belt Width 2" Lap Adjustment Pull-Down Lap Adjuster Location Integrated near the camlock / buckle tongue Camlock Lightweight Billet-Machined Camlock FHR / HANS Compatible Yes Primary Application GT, Endurance, Touring, and Professional Motorsport Available Colors Black, Blue, Red Ideal Applications GT racing Endurance racing Touring cars Prototype racing Professional and club road racing Multi-driver race cars Premium HPDE and track cars Porsche, BMW, Corvette, Ferrari, Radical, and similar track builds Harness Installation and Fitment The Sabelt Enduro Platinum is a motorsport restraint system rather than a vehicle-specific seat belt. Proper fitment depends on the racing seat, driver position, harness mounting points, cage or harness bar, and applicable competition regulations. Before installation, verify that the racing seat has appropriate shoulder, lap, and anti-submarine belt openings and that the vehicle provides suitable structural mounting locations. Shoulder, lap, and sub-belt routing and mounting angles must follow current Sabelt instructions and the requirements of your sanctioning organization. Attachment of the shoulder belts requires an appropriate roll bar or harness bar, with the anti-submarine straps mounted to suitable structural mounting points beneath the seat. Frequently Asked Questions Is the Sabelt Enduro Platinum FIA approved? Yes. The Sabelt Enduro Platinum Full 2" is homologated to FIA 8853-2016. Always verify that the homologation is accepted by your specific series, class, and sanctioning organization. Can I use the Enduro Platinum with a HANS device? Yes. Its full 2-inch shoulder belts are designed to work with modern HANS and other frontal head restraint systems. Why does the Enduro Platinum use 2-inch shoulder belts? Modern FHR devices provide a relatively narrow belt-bearing surface. Two-inch shoulder webbing interfaces naturally with this surface and is commonly used in modern professional motorsport restraint systems. What are pull-down lap adjusters? Pull-down refers to the direction the free end of the lap belt is pulled to tighten it. The Enduro Platinum positions these adjusters close to the center buckle, keeping them accessible to the driver or crew even in deeply bolstered racing seats. Why is the Enduro Platinum well suited to endurance racing? Its accessible pull-down adjusters, compact center buckle, guided belt engagement, lightweight hardware, and highly visible adjustment loops are designed to make securing different drivers faster and more repeatable during driver changes. What makes the Platinum camlock different? Sabelt uses a lightweight billet-machined camlock with belt-entry geometry designed to help guide the belt tongues into position. It is one of the primary hardware features distinguishing the Platinum from Sabelt's lower-priced endurance harnesses. Can multiple drivers use the same harness? Yes. Multi-driver applications are one of the Enduro Platinum's strengths. Its accessible adjustment system makes it easier to accommodate drivers of different sizes during endurance racing and shared-car track use. Can I install this harness with a factory seat? The Enduro Platinum is intended to be part of a properly engineered motorsport restraint system using a compatible racing seat and appropriate structural harness mounting points. It should not be treated as a direct replacement for a factory three-point seat belt. Why Buy Sabelt from Competition Motorsport? Competition Motorsport specializes in professional racing safety equipment. Our team can help you evaluate the complete restraint system—including the harness, racing seat, HANS or FHR device, mounting arrangement, and intended type of competition—to make sure the components work together correctly. If you're comparing the Sabelt Enduro Platinum with another racing harness, contact Competition Motorsport and we'll help you select the right configuration for your car and racing program.
Bell Oliver Bearman 2026 F1 mini helmet front three-quarter view with blue, yellow and white Haas racing graphics
Bell 1:2 Scale F1 Mini Helmet Oliver Bearman / Haas - 2026 F1 Season $247.00
Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet Celebrate Oliver Bearman's 2026 Formula 1 season with the Bell 1:2 Scale F1 Mini Helmet Oliver Bearman / Haas. This premium collectible recreates the helmet design worn by Bearman with Haas F1 Team in the 2026 Formula 1 World Championship, capturing the bold colors, graphics, and details of his full-size Bell HP77 race helmet. Featuring a brighter blue, yellow, and white color palette along with Bearman's distinctive bear graphic, this half-scale replica is designed for Formula 1 fans, Haas supporters, and serious motorsport collectors who want an authentic display piece tied directly to one of the sport's rising young drivers. Manufactured by Bell Racing Helmets using processes and materials inspired by its full-size racing helmets, the Oliver Bearman 2026 Mini Helmet delivers exceptional detail, premium construction, and a highly authentic appearance. Official Oliver Bearman 2026 Helmet Design This 1:2 scale collectible replicates the helmet design used by Oliver Bearman during the 2026 Formula 1 season with Haas F1 Team. The design features a vibrant combination of blue, yellow, and white along with Bearman's recognizable bear motif, creating a distinctive helmet that reflects both his identity and British racing heritage. From the shell graphics to the visor and interior detailing, Bell has recreated the look of Bearman's full-size HP77 helmet in a compact display format. Authentic Bell HP77 Half-Scale Replica The Oliver Bearman 2026 Mini Helmet is modeled after Bell's HP77 Formula 1 racing helmet and manufactured at approximately half the size of the full racing helmet. Bell produces its F1 mini helmets using manufacturing methods derived from its full-size competition helmets, giving the replica a level of construction and detail that sets it apart from standard decorative models. The result is a premium collectible that closely captures the proportions, appearance, graphics, and overall character of the helmet Bearman wears on track. Premium Collectible Construction Bell constructs this mini helmet using fiber-reinforced plastic, fabric, foam, and detailed hardware to create a realistic representation of the full-size racing helmet. 77% fiber-reinforced plastic 15% cotton fabric and foam 8% hardware Detailed visor and helmet hardware Realistic interior padding Authentic Bell Racing helmet proportions High-quality graphics replicating Bearman's 2026 helmet design Perfect for Display At half scale, the Bell Oliver Bearman Mini Helmet is large enough to showcase the helmet's intricate details while remaining compact enough for a desk, bookshelf, display cabinet, office, race room, or motorsport collection. Its detailed construction makes it an excellent centerpiece alongside die-cast Formula 1 cars, autographed memorabilia, team apparel, race-used collectibles, and other F1 mini helmets. Collector's Display Packaging The helmet is supplied in presentation packaging designed to protect the collectible during storage and display. The packaging also makes the Bell Oliver Bearman 2026 Mini Helmet an excellent gift for Formula 1 fans, Haas supporters, Bell helmet collectors, and Oliver Bearman fans. Bell Oliver Bearman 2026 Mini Helmet Features Official-style Oliver Bearman 2026 Formula 1 helmet design Haas F1 Team 2026 season collectible 1:2 scale Bell HP77 helmet replica Signature Oliver Bearman bear graphic Vibrant blue, yellow, and white design Detailed visor and helmet hardware Realistic interior construction Premium Bell Racing craftsmanship Compact size ideal for home or office display Collector's presentation packaging Excellent gift for Formula 1 and Haas fans Designed exclusively as a collectible display piece Bell Oliver Bearman Mini Helmet Dimensions Length: 6.49 in / 16.5 cm Width: 5.07 in / 12.9 cm Height: 5.19 in / 13.2 cm Packaging Specifications Box Length: 180 mm Box Width: 135 mm Box Height: 140 mm Gross Weight: 13 oz / 355 g including packaging Manufacturer Information Manufacturer: Bell Racing Helmets Model: Oliver Bearman Haas 2026 F1 Mini Helmet Scale: 1:2 Full-Size Helmet Inspiration: Bell HP77 Manufacturer Part Number: 4100564 For Display and Collecting Only This Bell 1:2 Scale F1 Mini Helmet is a collectible display item only. It is not a protective helmet and must not be worn or used for motorsport, karting, cycling, or any other activity requiring head protection. Bell Oliver Bearman 2026 F1 Mini Helmet FAQs Q: Is this Oliver Bearman's 2026 Formula 1 helmet?A: This is a 1:2 scale collectible replica based on Oliver Bearman's 2026 helmet design with Haas F1 Team. Q: What full-size helmet is the mini helmet based on?A: The collectible is modeled after the Bell HP77 helmet used by Oliver Bearman in Formula 1 competition. Q: What scale is this mini helmet?A: It is a 1:2 scale replica, approximately half the size of the full racing helmet. Q: Is this an actual wearable racing helmet?A: No. This mini helmet is designed strictly for display and collecting and does not provide protective functionality. Q: What makes the 2026 Oliver Bearman design distinctive?A: The 2026 design features a vibrant blue, yellow, and white color scheme along with Bearman's signature bear graphic. Q: Is the interior detailed?A: Yes. Bell mini helmets incorporate realistic interior padding, visor hardware, and construction details to closely resemble the full-size helmet. Q: What are the dimensions?A: The helmet measures approximately 6.49 inches long, 5.07 inches wide, and 5.19 inches high. Q: Does it come with collector's packaging?A: Yes. The helmet is supplied in presentation packaging suitable for storage, display, or gifting. Q: What is the Bell part number?A: The manufacturer part number is 4100564. A Must-Have Oliver Bearman and Haas F1 Collectible The Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet brings one of the most recognizable pieces of a Formula 1 driver's equipment into a premium collectible format. With authentic Bell styling, detailed HP77-inspired construction, Bearman's distinctive 2026 graphics, and a display-friendly half-scale size, it is an outstanding addition to any Formula 1, Haas, Bell Racing, or Oliver Bearman collection.
CMS Performance Subaru WRX Lap Belt Mounts with TIG-welded steel construction and bolt-in installation.
CMS Performance Harness Lap Belt Mounts for Subaru WRX from $182.00
CMS Performance Lap Belt Mounts for Subaru WRX Secure Racing Harness Lap Belt Mounting for Your Subaru WRX The CMS Performance Lap Belt Mounts for Subaru WRX provide strong, dedicated mounting points for the lap belts of your racing harness while retaining the factory seats and normal seat operation. Designed specifically around the Subaru WRX seat mounting system, the CMS Performance Lap Belt Mounts install beneath the factory seat slider tracks using the vehicle's existing seat mounting locations. No drilling, cutting, welding, or permanent modification to your WRX is required. The Right Way to Mount Harness Lap Belts in Your Subaru WRX A properly installed racing harness requires strong and correctly positioned mounting points. The CMS Performance Subaru WRX Lap Belt Mounts eliminate the need for improvised mounting solutions by providing dedicated attachment points specifically for your harness lap belts. The mounts utilize the factory seat mounting locations beneath the seat slider assembly, creating a clean and secure installation while keeping the hardware tucked discreetly beneath the seat. 1/4-Inch Solid Carbon Steel Construction CMS Performance Lap Belt Mounts are manufactured from 1/4-inch solid carbon steel and feature fully TIG-welded harness mounting tabs for exceptional strength and rigidity. Each mount is finished in a durable satin black powder coat that protects the steel and allows the hardware to blend cleanly into the Subaru WRX interior. 1/4-inch solid carbon steel construction Fully TIG-welded harness mounting tabs Dedicated racing harness lap belt mounting points Durable satin black powder-coated finish Low-profile vehicle-specific design True Bolt-In Installation With No Drilling The CMS Performance Subaru WRX Lap Belt Mounts install using existing factory seat mounting locations and hardware. There is no need to drill holes through the chassis, cut the interior, or weld mounting plates into the vehicle. The mounts can also be removed without leaving permanent modifications behind, making them an excellent option for street-driven WRXs that also see track use. Retains Factory Seat Adjustment The CMS Performance Lap Belt Mounts are engineered to integrate with the factory Subaru WRX seating system without sacrificing normal seat operation. Fits driver or passenger seat applications Maintains full fore/aft seat adjustment Maintains factory up/down seat adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Installs beneath the factory seat slider tracks No drilling or cutting required Built for Street and Track Subaru WRXs For Subaru WRX owners participating in track days, HPDE events, time trials, autocross, or other motorsport activities, the CMS Performance Lap Belt Mounts provide a clean solution for adding dedicated racing harness mounting points while retaining the factory interior. The low-profile design keeps the mounts nearly invisible once installed while providing convenient attachment points when your racing harness is in use. Designed and Manufactured in the USA The CMS Performance Subaru WRX Lap Belt Mounts are designed, manufactured, TIG welded, and powder coated in-house in the USA. CMS Performance components are engineered specifically for motorsport applications with an emphasis on strength, vehicle-specific fitment, straightforward installation, and clean integration with the factory vehicle. CMS Performance Subaru WRX Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mounts Vehicle: Subaru WRX Construction: 1/4-inch solid carbon steel Welding: TIG-welded construction Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions What do the CMS Performance Subaru WRX Lap Belt Mounts do?They provide dedicated attachment points for the lap belt portion of a racing harness without requiring permanent modifications to the vehicle. Do the Subaru WRX Lap Belt Mounts require drilling?No. They install using the factory seat mounting locations and require no drilling, cutting, or welding to the vehicle. Can the mounts be installed on the driver and passenger sides?Yes. The mounts are designed for use with either the driver or passenger seat. Will I still be able to adjust my factory seat?Yes. The mounts are designed to retain normal fore/aft and up/down factory seat adjustment. Can I continue using my factory seat belt?Yes. The mounts are designed so they do not interfere with the OEM three-point seat belt or factory airbag hardware. Are these mounts for the lap belts or sub straps?These mounts are specifically designed to provide mounting points for the lap belt portion of a racing harness. A sub strap mounting solution is required separately when installing a harness with anti-submarine straps. Can the mounts be removed later?Yes. Because they utilize the factory seat mounting locations, the mounts can be removed without leaving drilled holes or other permanent modifications behind. Where are the CMS Performance Subaru WRX Lap Belt Mounts made?They are designed, manufactured, TIG welded, and powder coated in-house in the USA.
CMS Performance Lap Belt Mount for Ford Mustang GT350 GT350R GT500 and S550
CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550 from $182.00
CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550 Secure Harness Lap Belt Mounting for Your Ford Mustang The CMS Performance Lap Belt Mount provides strong, properly positioned mounting points for racing harness lap belts in Ford Mustang GT350, GT350R, GT500, and S550 applications. Designed for use with the factory Ford Performance seating system, this bolt-in mount installs beneath the factory seat slider tracks using the vehicle's original seat mounting locations. No drilling, cutting, or permanent modification to the vehicle is required. Vehicle Fitment The CMS Performance Lap Belt Mount fits all variants of the following vehicles: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) Heavy-Duty TIG-Welded Steel Construction Built for serious track and motorsport use, the CMS Performance Lap Belt Mount is manufactured from heavy-duty solid carbon steel and fully TIG welded to create a rigid, secure structure for mounting your racing harness lap belts. The mount is finished in a durable satin black powder coat that blends cleanly into the interior and is nearly invisible once the seat is installed. True Bolt-In Installation The CMS Performance Lap Belt Mount attaches to the factory seat mounting points beneath the seat slider tracks and utilizes the original Ford seat mounting hardware. Installation requires no drilling, welding, or cutting and can be reversed without leaving permanent modifications behind. Maintains Factory Seat Function Unlike improvised harness mounting solutions, the CMS Performance Lap Belt Mount is engineered specifically around the factory Mustang seat system. Fits the driver or passenger seat Maintains full fore/aft seat adjustment Maintains factory seat height adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Provides dedicated mounting points for racing harness lap belts Designed and Manufactured in the USA The CMS Performance Lap Belt Mount is designed, manufactured, TIG welded, and powder coated entirely in-house in the USA. Every mount is built specifically for motorsport applications where strength, proper harness positioning, vehicle compatibility, and clean installation are critical. CMS Performance Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mount Construction: TIG-welded solid carbon steel Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger side Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions Does installation require drilling or cutting?No. The CMS Performance Lap Belt Mount installs using the factory seat mounting locations and original mounting hardware. Will the mount interfere with seat adjustment?No. The mount is designed to retain normal fore/aft and up/down seat adjustment. Can it be installed on the driver and passenger seats?Yes. The mount can be used on either the driver or passenger side. Can I continue using the factory seat belt?Yes. The mount is designed so it does not interfere with the factory three-point seat belt or associated airbag hardware. Is this the Sub Strap + Lap Belt Mount?No. This listing is specifically for the CMS Performance Lap Belt Mount. A combination Sub Strap + Lap Belt mounting solution is available separately for applications requiring both lap belt and anti-submarine belt mounting points. Where is the CMS Performance Lap Belt Mount made?It is designed, manufactured, TIG welded, and powder coated in the USA. ```
A black and white technical line drawing showing the dimensions of a Pagid 1283 brake pad, with labels indicating 100 mm width, 47 mm height, and 43 mm pad depth.
Pagid 1283 Racing Brake Pads from $438.00
Pagid Racing Brake Pads Shape 1283 Pagid 1283 Brake Pad Fitment Guide Make Model Year Front Rear Maserati Trofeo GT4 2016-    X Maserati Trofeo MC 2013-    X Mitsubishi Lancer Evo IX Gravel Rally 2005-2007    X Mitsubishi Lancer Evo X Gravel Rally / FIA Gr. N 2007-2016    X Mitsubishi Lancer Evo X Tarmac Rally [Brembo Caliper] 2007-2016    X Tatuus F3 [Brembo Caliper] 2018-    X    X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RS 42 Compound Pagid RS 42 is a medium-friction compound with medium initial bite and good cold friction. It is a classic rally pad that is also very popular in small formula and touring cars. RS 42 is a low-metallic resin bonded material containing steel and aramid fibers. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to its combination of bite, friction and controllability. Pagid RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typical use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing on tarmac and gravel and for front-engine cars. RST 4 is also used in NASCAR on long ovals. Pagid RST 5 Compound RST 5 was developed for high-friction sprint and rally applications where extreme thermal stability is critical. It delivers very high initial bite, strong fade resistance and excellent recovery while keeping generated heat in the brake pad rather than transferring it into the brake fluid. RST 5 is designed for demanding rally, rallycross and other high-thermal-load competition applications.
Pagid 2560 Brake Pad Shape Image
Pagid Racing Brake Pads 2560 $2.00
Pagid 2560 Racing Brake Pads Pagid 2560 Racing Brake Pad Fitment Guide Make Model Engine / Variant Years Front Pad Shape Rear Pad Shape BMW M4 GT3 3.0L 2022+ FRP3155 FRP1078 BMW M4 GT4 (G82) 3.0L 2022+ FRP3155 FRP1078 Ferrari 296 GT3 3.0L 2022+ FRP3155 FRP1078 / FRP3156 Lexus RC F GT3 — 2017+ FRP3155 FRP3156 McLaren 650 S GT3 Race Car — 2017–2019 FRP3155 FRP1078 McLaren 650 S GT3 Race Car — 2020+ FRP3153 FRP1078 Mercedes AMG GT4 4.0L 2018+ FRP3155 FRP1078 Mercedes AMG GT3 6.2L 2019+ FRP3155 FRP3156 Nissan GT-R Nismo GT3 Race Car — 2015+ FRP3155 — Porsche 911 (991.2) GT3 R 4.0L 2019+ FRP3155 FRP1078 Porsche 911 (992) GT3 R 4.0L 2022+ FRP3155 FRP1078 / FRP3156 PAGID RSL2 / RSL2E COMPOUND RSL 2E and RSL 2 are low metallic resin bonded materials containing steel and aramid fibers with characteristics often also used in sprint races. RSL 2E is perfect as a front axle application for long endurance GT racing with high cooling efficiency. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races on applications with high cooling efficiency. RSL 2E is further improved in terms of pad life and modulation, as well as friction stability at high temperatures and pad life with optimized cooling.  RSL 2E is perfect as a front axle application for long endurance GT racing with high cooling efficiency.   PAGID RST 1 COMPOUND Pagid RST 1 is a high-friction, aggressive pad with instant pedal response, quick release, a firm pedal at all temperatures, and a progressive torque curve. Suitable for applications with high down-force and/or very high grip.  RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid Brake Pad 8100 Shape Image
Pagid 8100 Racing Brake Pads from $954.00
Pagid Racing Brake Pad Shape 8100 Pagid 8100 Brake Pad Fitment Guide Make Model Engine / Variant Years Front Pad Shape Rear Pad Shape Aston Martin Vantage V8 GTE 4.0L 2018+ FRP3153 FRP1078 Aston Martin Vantage AMR GT3 6.0L 2018–2023 FRP3153 FRP1078 Aston Martin Vantage AMR GT3 EVO 6.0L 2024+ FRP3153 FRP1078 Audi R8 LMS GT2 5.2L 2019+ FRP3153 FRP1078 Audi R8 LMS GT3 5.2L 2015–2018 FRP3153 FRP3156 / FRP1078 Audi R8 LMS GT3 EVO1 5.2L 2019–2021 FRP3153 FRP1078 Audi R8 LMS GT3 EVO2 5.2L 2022+ FRP3153 FRP1078 Bentley Continental GT3 4.0L 2018+ FRP3153 FRP1078 BMW M8 GTE 4.0L 2018+ FRP3153 FRP3156 Chevrolet Camaro GT4 R 6.2L 2018+ FRP3153 FRP3137 Dodge Viper SRT GT3 R 8.0L 2013–2017 FRP3153 FRP3156 Ferrari 488 GTE — — FRP3153 FRP1078 Ferrari 458 GT3 Endurance 4.5L — FRP3153 FRP1078 Ferrari 458 GTE 4.5L 2014–2016 FRP3153 FRP3156 Ferrari 488 GT3 4.5L 2018+ FRP3128 / FRP3153 FRP1078 Honda NSX GT3 3.5L 2024+ FRP3153 FRP3156 Lamborghini Huracan GT3 Evo1 5.2L 2018+ FRP3153 FRP3156 Lamborghini Huracan GT3 Evo2 5.2L 2023+ FRP3168 / FRP3153 FRP1078 / FRP3029 McLaren 650 S GT3 Race Car — 2020+ FRP3153 FRP1078 McLaren 720 S GT3 EVO — 2019+ FRP3153 FRP1078 Toyota GR Supra GT4 3.0L 2020+ FRP3153 FRP3156   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Pre-Bedding Service Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes. Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts. To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa