Sparco
Sparco Eagle 2.0 Driver Race Suit
$2,413.00
Sparco Eagle 2.0 Race Suit
The Eagle 2.0 is newest evolution of the Eagle race suit. The new Eagle 2.0 race suit features an updated, softer HOCOTEX® material which is 30% thinner. The Eagle 2.0 features an all-new design with four new colorways. The Eagle 2.0 race suit carries the newest FIA homologation.
Single-Layer Construction, Multi-Layer Performance
The Eagle 2.0 is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle 2.0 is FIA 8856-2018 homologated.
Unprecedented Comfort
Thanks to HOCOTEX®, the Eagle 2.0 is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle 2.0 ultimate flexibility and comfort. The Eagle 2.0 uses at new stretch material called Eagle fabric, which is lighter, more breathable, and more abrasion resistant than traditional stretch material.
Improved Fire & Heat Resistance
Traditional racing suits have layers of fabric sewn together in a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle 2.0 has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance.
Sparco Eagle 2.0 Driver Race Suit Details:
Single layer construction, multi-layer protection
3X more breathable than a standard suit with full 360o arm gussets
Large stretch panels on sides and back with new breathable fabric
Reinforced arms and legs with anti-abrasive material
Three years of research and development
HOCOTEX® patented Sparco Technology made in Italy
Available in four colorways
FIA 8856-2018 homologated
Bell
Bell GT6 RD Carbon Fiber Helmet SA2020 with Communications Installed
$2,272.00
Bell GT6 RD Carbon Fiber Helmet
With Communications System Factory Installed
Derived from Bell HP6, the Bell GT6 RD Carbon features the same modern and aggressive design developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The GT6 RD is fitted with a fully-integrated radio communication kit, including a front-mounted microphone and ear cup speakers providing excellent sound along with insulation from external noise. The kit includes a wired four-pin male IMSA radio connector.
Bell GT6 RD Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part number:Â 123912
Construction: Ultra-light premium carbon-composite shell
Homologation: FIA 8859-2015 and Snell SA2020
Factory installed HANS anchors: yes
Interior: dark grey high-strength, high-comfort FR fabric
Color: carbon, gloss finish
Sizes: 6 3/4 (54cm) to 7 5/8+ (61cm+)
Bell GT6 RD Carbon Fiber Helmet Additional Features:
Factory-installed communication system with microphone and ear cups (IMSA connector)
Wide eye port for better vision in closed cockpit cars
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Integrated channels for optional drink tube (not included)
Extraction vents maximize cooling air ventilation
Optional top- and side-air intakes available for use with external cooling system
Ear cups increase noise insulation
What's In The Bell GT6 RD Carbon Box:
GT6 Carbon Fiber helmet
Installed communications
Hans anchors
Clear Bell SE06 3mm DSAF shield
Draw-string helmet bag
Plastic tear-off posts installed
Hex wrench key
Drink tube system (shown in photos for illustrative purposes) is not included.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars GP Tech v3 Driver Race Suit
$1,704.00
$2,556.00
Alpinestars GP Tech v3 Driver Race Suit
The Alpinestars GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars, combined with an innovative aramidic-based knit lining for optimum levels of comfort, protection, light weight, and comfort. Thanks to this aramidic base lining with its open-weave structure, plus breathable mesh side panels, this Alpinestars GP Tech v3 is superb at maintaining air flow and regulating body temperature.
The Alpinestars GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbows, crotch, and knee areas to provide great flexibility both in and out of the car.
Alpinestars GP Tech v3 Race Suit Protection
Certified to the latest FIA 8856-2018 homologation standard
Super lightweight and breathable multi-layer suit incorporating thin stretchable panels for maximum comfort and effective regulation of body temperature
Nomex antistatic outer shell fabric for exceptional heat- and flame-resistance
Laundry bag included for convenience and effective material fiber protection
Alpinestars GP Tech v3 Race Suit Construction
Strategically positioned Formula One derived stretch panels on the center back and spine, lower back, elbows, crotch and knees for enhanced maneuverability both in and out the car.
Alpinestars fully-floating arms with stretchable knit fabric ensure minimal material resistance while driving
Soft, thin wrist and ankle cuffs for maximum comfort and reduced weight
Soft knit collar with secure hook-and-loop closure for improved comfort
Alpinestars exclusive shoulder epaulette construction provides for effective driver extraction in the event of a crash
Printed logos help maintain outer material integrity and reduce weight
Alpinestars GP Tech v3 Race Suit Details
Manufacturer: Alpinestars
Manufacturer part no.: 3354120
Premium YKK lightweight zipper with Alpinestars leather pull and double slider for a versatile, customizable fit.
Thigh pockets for convenient, unobtrusive storage.
Athletic fit
Weight: 325g/m2
Bell
Bell RS7 Carbon Fiber Helmet SA2020
$2,130.00
Bell RS7 Carbon Fiber Helmet
The Bell RS7 Carbon Fiber SA2020 helmet features Bell’s proprietary high-pressure molding system based on the innovative design of the Bell HP7. The ultra-light carbon fiber shell is designed for optimum acoustic comfort, energy absorbing capability, and ideal aerodynamic performance. Top forced-air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won’t enter the helmet in outdoor racing environments.
The Bell RS7 Carbon Fiber SA2020 helmet’s advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers.
Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell RS7 Pro Carbon Fiber helmet safe and secure throughout each a race weekend.
Bell RS7 Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part number:Â 1204A
Homologation: Snell SA2020 and FIA 8859-2015
Construction: High pressure molded carbon fiber shell
Sizes: 54cm to 61+cm
Interior: Grey Comfort-Max FR® moisture-wicking fabric
Shield: clear SE07 3mm DSAF shield w/ DSAF insert
Included: M6 HNR terminals and hex wrench
Bell RS7 Carbon Notable Features:
Fourteen intake and exhaust channels move hot air out of the helmet
Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection
Excellent high-speed aerodynamic stability with optional chin bar, top Gurneys, and rear spoiler
Optional top forced-air inserts include eyeport, eight-hole and ten-hole kits
Integrated channels for optional integrated drink tube and radio systems.
Pro-style, multi-density foam interior with contoured cheek pads for professional fit
Narrow eye port
This helmet will ship with signature required for delivery.
Hans
Stilo HANS Zero Head Restraint
$2,062.00
Stilo HANS Zero Head Restraints
The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever.
Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified and FIA 8858 approved. Made in America.
NOTE: 30o Layback, size Medium only (which we've tested and works in both open and closed cars). Give Competition Motorsport a call at (844) 438-7244 for more details.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Prime LT Driver Race Suit - Limited Edition
$1,987.00
$2,982.00
Sparco Prime LT Limited Edition Driver Race Suit
The Sparco Prime LT is a limited edition driver's race suit available only for the US market. The Sparco Prime LT race suit has a bold design two featuring two colorways. This is a limited edition suit, the Sparco Prime LT is available only as long as supplies last.
The Sparco Prime LT uses suit material originally developed for the McLaren Formula One team, making it one of the lightest FIA approved racing suits in the world. The Sparco Prime LT boasts unparalleled technological features created in the Sparco R&D laboratories, a project optimizing every detail of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and the stitching flattened even more.
The Sparco Prime LT features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort woven using the Kompact system. The material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime LT racing suit weighs from 240 to 270 grams per square meter (depending on size).
Sparco Prime LT Driver Race Suit Details:
Lightest FIA approved racing suit in the world
Exclusive DuPont Nomex fibers provide superior fire protection, breathability, and comfort
Pre-curved arms and legs
Lightweight zipper and collar
Breathable stretch panels throughout
FIA 8856-2018 approved
Bell
Bell BR8 Carbon Fiber Helmet SA2020
$1,846.00
 Bell BR8 Carbon Fiber Auto Racing Helmet
Ultimate Performance, Unmatched Safety and Versatility
Designed for off-road and dirt track racing, the versatile and ultra-lightweight Bell BR8 Carbon Fiber helmet can be used in multiple configurations including standard, left- or right-side forced air, left- or right-three quarters top forced air, or top forced air. Utilizing an innovative kit system, included with the helmet, racers can customize the BR8 Carbon fiber helmet to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model.
The Bell BR8 Carbon Fiber helmet features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive, fog-free visor seal, and rear-facing venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to flow freely. The Bell BR8 Carbon Fiber helmet features a unique air chamber system, evenly distributing airflow around the head regardless of the top air configuration used. This helmet can be used with or without ear cups.
Bell BR8 Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part no.:Â 1238A
Construction: lightweight carbon fiber shell
Interior: Dark grey fire resistant fabric
Homologation: FIA 8859-2015 and Snell SA2020
Color: gloss carbon fiber
Front duckbill: included
Sizes:Â 57cm- (7 1/8-) to 61cm+ (7 5/8+)
Shield (clear shield included): Bell SRV-8
Shield pivot kit: Bell SRV-1
Bell BR8 Carbon Fiber Helmet Features:
Integrated channels to install optional drink tube and radio systems
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Multi-purpose fit system with or without included ear cups
Interior ventilation channels maximize airflow
Can be converted to side-, three quarter-, or top-air
Rear vents create a venturi effect pulling cool air through the helmet while keeping dust and dirt out
Synthetic rubber eyeport gasket prevents dirt and water from entering
Bell
Bell GT6 Carbon Fiber Helmet SA2020
$1,846.00
Bell GT6 Carbon Fiber Auto Racing Helmet
Â
Discover the Bell GT6 Carbon Fiber Helmet - Your Competitive Edge
The Bell Helmets GT6 Carbon Fiber racing helmet features the same modern and aggressive design at Bell's iconic HP6 helmet. Developed for racers in closed-cockpit cars, the Bell GT6 Carbon Fiber features an ultra-lightweight premium carbon shell with a wide eyeport for extended field-of-view. Its ventilation slots can be connected to various types of external air cooling systems. And it can be fitted with optional ear cups providing optimal noise insulation.
Fully integrated radio communication and hydration systems are available separately, or come factory-installed in the Bell GT6 RD Carbon Fiber.
Bell Racing GT6 Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part no.:Â 12390
Homologation: FIA8859-2015 and Snell SA2020
Sizes: 54cm (6 3/4) to 61cm+ (7 5/8+)
Construction: Ultra-lightweight premium carbon-composite shell
Color:Â Gloss carbon fiber
Interior: Dark grey high-strength, high comfort FR fabric
Shield:Â SE06 3mm DSAF
Factory installed HANS anchors: yes
Bell GT6 Carbon Fiber Helmet key Features:
Wide eye port for optimal field-of-view in closed-cockpit cars
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Integrated channels for optional drink tube and radio systems
Extraction vents maximize cooling air circulation
Optional top- and side-air intakes available
Optional ear cups for increased noise insulation
Alternative interior fabric colors are available by special order: Tan, White, Red, Purple, Blue, Green and Neon Yellow
Included in the Bell Racing GT6 Carbon Fiber Box:
Bell Racing GT6 Carbon Fiber helmet
Clear SE06 3mm DSAF shield (installed)
Drawstring helmet sack
Plastic tear-off posts (installed)
Hex wrench key
Â
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Superleggera Driver Race Suit (Discontinued Colorways)
$1,845.00
$2,413.00
Sparco Superleggera Driver Race Suit
The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera racing fire suit is not only lightweight but it is also one of the most comfortable Sparco race suits available. It features special four-way stretch panels that run down each side from the underarm to the hip. These side stretch panels combined with a rear stretch panel give drivers incredible mobility and comfort in the seated position.
The Sparco Superleggera driver race suit adds breathable inner-thigh stretch panels, 360º fully-floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated.
Sparco Superleggera Driver Race Suit Details:
FIA 8856-2018 and SFI 3.2A/5 approved
The lightest FIA suit on the market
Pre-curved arms and legs for a natural fit
Lightweight zipper and collar
Inner-thigh stretch panels
Multiple strategically placed four-way stretch panels
OMP
OMP Tecnica Evo Driver Race Suit
$1,845.00
OMP Tecnica Evo Racing Driver Suit
OMP's latest Tecnica Evo Racing Suit adds updated features to this popular, classically-styled suit. Drawing from OMP's extensive Formula 1 background, the Tecnica Evo is a lightweight, breathable, feature-filled fire suit that doesn't bust the budget. Ultra-flat, anti-rubbing seams are not only comfortable, but help prevent unwanted suit-snagging in tight cockpits. Pre-curved sleeves are attached with a fully-floating epaulette system for freedom of movement, and the "Fishbone" quilting is engineered for optimal ergonomics.
A unique feature of the Tecnica Evo is OMP's AFS (Advanced Fastening System) retractable belt. This semi-elastic belt is partially hidden within the suit, increasing comfort and flattening the suit's profile. The Tecnica Evo's lightweight Nomex material (only 295 gr/sqm) features OMP's Dry System 3D, a highly breathable fabric with excellent fire protection properties. This innovative material makes up flexible inserts strategically placed on the Tecnica Evo for improved comfort on the hottest days.
OMP Tecnica Evo Racing Suit Safety Features:
Certified to FIA 8856-2018 homologation standards.
Lightweight and breathable three-layer suit incorporating OMP's new Dry System 3D for excellent breathability and driver comfort.
Nomex outer shell fabric for exceptional heat and flame-resistant proprieties.
OMP Tecnica Evo Racing Suit Details:
Three-layer suit construction
Shaped collar with soft-knitted inner material
Pre-curved sleeves for maximum comfort
Floating arms with elastic bellows
Dry System 3D material
Ultra-flat anti rubbing seams
AFS (Advance Fastening System) retractable belt
Classic-fit design.
Weight: 320 g/m2
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5.1 GT Offshore Composite Helmet SA2020
$1,704.00
$1,704.00
Stilo ST5.1 GT Offshore Composite Helmet SA2020
Stilo ST5.1 GT Offshore - The Legend Returns
The Stilo ST5.1 GT Offshore SA2020 helmet carries over everything that made the Stilo ST5 GT one of the most-loved helmets in motorsports. Featuring the same tall eyeport and iconic side ports of the previous generation, the ST5.1 GT from Stilo is worth getting excited about. The Offshore version, with its easy-to-spot bright orange shell, is already wired up for communications through the left-side port.
One of the great things about Stilo GT Series helmets is their adjustability using Stilo helmet padding. Crown padding, cheek padding and different ear muff sizes are all available to customize the fit of your Stilo helmet.
Stilo GT Helmets Feature Unrivaled Features and Flexibility
The Stilo ST5.1 GT Offshore Composite is unsurpassed in built-in flexibility. Each of its two side ports can be fitted with one of three different types of integrated communication electronics, forced air, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT Offshore is sleek and seamless. When not in use, you don't even know the features are there. Stilo offers simply the best modular racing helmet on the market.
This helmet includes communications pre-installed in the left port.
Stilo ST5.1 GT SA2020 Offshore Composite Helmet Orange Details:
Manufacturer: Stilo
Manufacturer part number: DA0702BF2T
Color: Orange
Homologation: Snell SA2020
Shield lock position: center
Replaceable cheek pads: yes
Noise attenuating earmuffs: yes
Sizes: XS to XXXL (54cm to 64cm)
Additional Stilo ST5.1 GT Offshore helmet shields available here
A Note on Stilo Sizing:
We have found that customers who wear a 59cm helmet in other brands are most comfortable in a 60cm Stilo ST5.1 GT Composite, which uses the larger shell size.
This helmet will ship to you with signature required for delivery.
Bell
Bell MAG-10 Carbon Fiber Helmet SA2020
$1,704.00
Bell MAG-10 Carbon Fiber Auto Racing Helmet
Gear Up for Victory with the Bell Mag-10 Carbon
The Bell Racing Helmets Mag-10 Carbon is a sophisticated, ultra-lightweight premium helmets in a sleek and modern design that provides a high performance open-face helmet for racetrack use. Featuring an ultra-lightweight carbon composite shell, an adjustable carbon fiber peak combined with our new adjustable and integrated sunscreen, a highly comfortable professional fit, the Bell Mag-10 Carbon is the helmet of choice for racing drivers looking for a high-end super-light premium open face helmet for circuit use.
Bell Mag-10 Carbon Fiber Helmet Features
Homologation: FIA8859-2015 and Snell SA2020
Exterior: gloss finish carbon fiber
Interior: dark grey high-strength Comfort FR® fabric
Ultra-lightweight premium carbon composite shell
Factory installed HANS anchors
Integrated adjustable anti-scratch Dark Smoke sunscreen (M10S)
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Adjustable carbon sun peak
Removable multi-density cheek pads use advanced materials for optimal comfort
Bell MAG-10 Carbon Fiber Helmet Options
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green, and Neon Yellow (each by special order).
Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort.
Sizes: 6 3/4 (54 cm) to 7 5/8+ (61+ cm)
In the Box of the Bell MAG-10 Carbon
MAG-10 Carbon helmet
Dark Smoke shield installed
HANS post anchors installed
Drawstring helmet sack
Hex wrench key
This helmet will ship with signature required for delivery.
FluidLogic
FluidLogic Coaxial System (Forced Air)
$1,704.00
FluidLogic Coaxial System (Forced Air)
Forced-Air applications use our Maglock® Coaxial connector to provide air and water quickly and easily.
The Pod & Coaxial kit is designed for users that have a pre-existing forced air setup for their vehicle and helmet. The Pod is the heart and brain of the Fluidlogicâ„¢ system that also connects to your IOS device via Bluetooth to allow the user to fully customize their hydration profile. Included with the Pod is the Microbutton used to visually communicate with the user and command the Fluidlogicâ„¢ system with the press of a button. All the necessary mounting, wiring and plumbing hardware is included to turn the existing fluid source into a smart hydration system with no helmet drilling or modifications.
The Fluidlogic™ Pod paired with the Coaxial system allows forced air users to connect both air and water within the same Maglock® magnetic connection. The Coaxial kit includes everything needed to completely set up one helmet and one seat in the vehicle.
Alpinestars
Alpinestars GP Pro Comp v2 Boot Cuff Driver Race Suit
$1,704.00
Alpinestars GP Pro Comp v2 Driver Race Suit (Boot Cuff)
The Alpinestars GP Pro Comp v2 boot cuff race suit features an outer shell material developed exclusively for Alpinestars, which is combined with a soft aramidic base knit lining for optimum levels of comfort, protection, lightness and comfort. Thanks to the introduction of the aramidic base lining with an open weave structure, this suit delivers excellent levels of breathability, which is further reinforced by strategically-positioned knitted stretchable open mesh panels on the back, crotch, and armholes for additional airflow and flexibility both in and out of the car. The Alpinestars GP Pro Comp v2 race suit also incorporates innovative silicon grip detailing on the shoulders and lower back to prevent sliding within the race seat, help stabilize the HANS device, and relieve pressure on the shoulders.
Alpinestars GP Pro Comp v2 Boot Cuff Driver Race Suit Details
Certified to the SFI 3-4 A/5 standard
Lightweight and breathable multi-layer suit
Stretchable mesh panels for maximum comfort and effective body temperature regulation
Innovative silicon grip technology on shoulders and lower back provides positive connection with the HANS device and racing seat
Formula One derived cable opening for cooling shirt and/or communications wiring on the left side, covered by a self-closing flap
Strategically positioned Formula One derived flexible mesh panels on the lower back and crotch area enhance flexibility both in and out of the car
Alpinestars GP Pro Comp v2 Boot Cuff Driver Race Suit Construction
Alpinestars fully-floating arms with stretchable knit fabric ensure minimal material resistance while driving
100% aramidic antistatic outer shell with exceptional heat- and flame-resistance proprieties
Ribbed wrist and ankle cuffs (below the outer boot cuff) provide excellent comfort
Tall, ribbed collar for extended coverage of the neck and improved driver comfort
Alpinestars exclusive shoulder epaulette construction eases extraction of the driver in the event of a crash.
Opening for cooling shirt and/or communication system connections on the left side, covered by a self-closing flap
Premium YKK metal zipper for durability
Double slider on front for a versatile, customizable fit
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining as used on Alpinestars F1 racing suits
Laundry bag included for convenience and effective material fiber protection
Athletic/regular fit
Weight: 305 g/m2
Alpinestars
Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit
$1,704.00
Alpinestars Stella GP Comp v2 Women's Driver Race Suit
The Alpinestars Stella GP Pro Comp v2 women's race suit features an outer shell material developed exclusively for Alpinestars, combined with a soft aramidic base knit lining for optimum levels of comfort, protection, lightness, and comfort. Thanks to the introduction of this aramidic base layer with its open-weave structure, the Alpinestars Stella GP Comp v2 delivers exceptional breathability, reinforced by strategically-positioned knitted stretchable open-mesh panels on the back, crotch, and armholes for added airflow and material flexibility. This adds up to comfort and maneuverability both in and out of the car.
The Alpinestars Stella GP Comp v2 race suit also incorporates an innovative silicon grip technology applied to the shoulders and lower back, preventing any sliding in your race seat, keeping your HANS device in place, and reducing pressure on the shoulders.
Alpinestars Stella GP Comp v2 Women's Driver Race Suit Details
Certified to the latest FIA 8856-2018 homologation standard certification
Female anatomical torso, leg, and arm paneling patterned for an optimum fit in the driving position
Lightweight, breathable multi-layer suit
Stretchable mesh panels for maximum comfort and effective body temperature regulation
Innovative silicon grip technology on shoulders and lower back to provide excellent feel from the racing seat
Strategically positioned Formula One derived flexible mesh panels on the lower back and crotch enhance maneuverability both in and out the car
Alpinestars Stella GP Comp v2 Women's Driver Race Suit Construction
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance
Ribbed wrist and ankle cuffs for maximum comfort and reduced weight
Tall, ribbed collar extends coverage of the neck and improves driver comfort
Alpinestars exclusive shoulder epaulette construction eases driver extraction in the event of a crash
Premium YKK metal zipper for durability.
Double slider on front for a versatile and customizable fit
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining as used on Alpinestars F1 racing suits
Laundry bag included for convenience and effective material fiber protection
Athletic/regular fit
Weight 345 g/m2
