All products
Auto Racing Driver Combos
Auto Racing Driver Suits
Auto Racing Gloves
Auto Racing Helmet Accessories
Auto Racing Helmets
Auto Racing Livery Collections
Auto Racing Shoes
Casual Racing Apparel
Driver Cooling & Hydration
HANS & HNR Devices
Nomex Underwear
Racing Gear Bags
Racing Gear Cleaners
Sparco Electric Scooters
Chillout Systems
Chillout Systems Quantum Cooler Pro
$5,837.00
Chillout Systems Quantum Cooler Pro
The Chillout Systems Quantum Cooler series of coolers are the most powerful portable iceless cooling systems ever designed for auto-racing. Requiring no ice, this driver cooling system is completely maintenance-free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5x its size.Â
Rated at 20 liters per minute/16 psi, the Quantum Pro system is capable of chilling to under 35º F. Max amp draw is rated at 18-22 amps, depending on installation and environmental conditions. System contains less than 1.75 oz. of freon sealed within the rotary micro-compressor system. The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 220-cfm fans help decrease amp draw, and a bright, easy-to-read color digital display offers valuable information and data.Â
Weighing in at 10.5 lbs, the Quantum Pro is portable and hot-swappable so you can quickly move it from mounting location to mounting location within seconds. A dash-mountable digital control display is available for cooler installations out of the driver's reach.Â
When planning installation, please consider the interior temperature of your vehicle under racing conditions. Keep in mind that ducting is necessary for many installations to achieve the best results. Using four-inch ducting is highly recommended and eliminates the need for a supplemental blower. Three-inch ducting is restrictive and requires the use of a high performance (250+ cfm) blower.
Quantum Pro vs Quantum V3:
Full-color LCD display with extensive data
Internal bypass valve eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected.
Dual 4-inch, 220 cfm brushless fansÂ
50% larger condenser vs V3
25% larger evaporator vs V3
LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources.
Coolant reservoir has double the capacity at 13 oz.Â
Eco mode maintains system under 18 amps at all times.
Carbon fiber mounting plate further reduces weight and heat-soak.Â
Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance.
IP65 rated.
In the Box:
Quantum Cooler Pro
Carbon Fiber Mounting Plate
Wiring Harness
Locking Ball Pins
Priming Tube
Cross Compatibility:
The Chillout Systems Quantum Cooler Pro is compatible with other brands of cooling shirts that use 1/4" tubing. You will need to purchase the Chillout Systems Dual Prong Adapter and Insulated Hose in order to connect to non-Chillout shirts.
Sabelt S.p.A.
Sabelt Custom Superlight TS-10 Driver Race Suit
$4,916.00
Sabelt Custom Superlight TS-10 Driver Race Suit
The Sabelt Custom Superlight TS-10 Driver Race Suit is built for drivers who want the lightest possible FIA-approved fire suit with a fully personalized design and fit. If you have ever wanted a race suit tailored to your body, designed around your livery, and customized with your name, flag, colors, logos, and sponsor branding, the Sabelt Custom Superlight TS-10 delivers a true professional-level solution.
The Sabelt Superlight TS-10 is one of the lightest driver race suits available, with a fabric weight of only 265 g/m² while still meeting the latest FIA 8856-2018 homologation for modern motorsport safety. The custom version allows you to choose primary, secondary, and tertiary colors, select thread colors if desired, and add custom logos, manufacturer logos, series logos, driver details, and more.
Sabelt Custom Superlight TS-10 Race Suit Options
Name on suit
Country flag on suit
Belt on suit
Choice of slim or regular fit
Cooling shirt tube pass-through: none, left, or right
Boot-cut or standard cuff
Pockets: none, normal, and/or cellphone
Sponsor logos printed or embroidered
Custom colors, patterns, and thread colors
Manufacturer, sponsor, team, and series logo placement
Standard Sabelt Superlight TS-10 Race Suit Features
FIA 8856-2018 approved
Ultra-lightweight 265 g/m² fabric construction
Full floating sleeves for improved range of motion
Large stretch panel in the lumbar and hip areas
Driver cooling tube pass-through on the left hip
Cellphone pocket on the front right thigh
Pre-curved arms for comfort in the driving position
Professional motorsport fit and construction
Fully Custom Race Suit Design
The Sabelt Custom Superlight TS-10 can be designed around your racing program, team branding, car livery, sponsor package, or personal style. You can select your colors, add logos, adjust design elements, and configure suit options to create a finished product that looks professional and fits your exact needs.
Whether you compete in IMSA, WEC, Ferrari Challenge, Porsche Sprint Challenge, SCCA, NASA, or another racing series, Competition Motorsport can help guide the custom suit process. We understand how series logos, manufacturer logos, and sponsor placement need to be handled for a clean, compliant, professional appearance.
If you are not competing in a pro or semi-pro series, the Sabelt Custom Superlight TS-10 is still an excellent choice for drivers who want a premium custom fire suit built to match their car, helmet, team colors, or personal livery. Without series compliance requirements, the design possibilities are wide open.
Lightweight Performance And Driver Comfort
At only 265 g/m², the Superlight TS-10 is designed for drivers who want reduced weight without sacrificing certified fire protection. Full floating sleeves, pre-curved arms, and stretch panels in the lumbar and hip areas help the suit move naturally with the driver while seated in the car. The result is a lightweight custom race suit built for long sessions, endurance events, sprint racing, and serious track use.
Important Pricing And Ordering Information
The Sabelt Custom Superlight TS-10 Driver Race Suit is a special-order product and is estimated to ship in approximately two to three weeks. Returns are not accepted on special-order custom suits.
The standard price includes basic customization, colors, and patterns. After your order is placed, a custom suit specialist from Competition Motorsport will contact you to confirm your sizing, color selections, series compliance needs, logo placement, and other design details. You will be sent a measurement chart and may submit photos of your car livery, sponsor logos, example suits, or other references to help create the artwork for your custom suit.
A proof will be sent for review, revisions, and approval, typically within two to three business days. Once the final design, colors, sizing, logos, and options are approved, the final cost of your custom suit will be confirmed with a supplemental invoice. Final pricing may vary based on the number of logos, design complexity, custom colors, embroidery, and additional options selected.
Sabelt Custom Superlight TS-10 Driver Race Suit FAQs
Is the Sabelt Custom Superlight TS-10 FIA approved?Yes, the Sabelt Superlight TS-10 is FIA 8856-2018 approved.
How light is the Sabelt Superlight TS-10?The suit has a fabric weight of only 265 g/m², making it an extremely lightweight FIA-approved driver suit.
Can I choose custom colors?Yes, you can choose primary, secondary, and tertiary colors, and thread colors may also be selected if desired.
Can sponsor logos be added?Yes, sponsor logos, manufacturer logos, series logos, team logos, and custom branding can be added to the suit.
Can logos be printed or embroidered?Yes, sponsor logos and other graphics can be printed or embroidered depending on the design and option selected.
Can the suit be made to fit me?Yes, the suit can be configured with custom measurement information and fit preferences, including slim or regular fit.
How long does a custom Sabelt TS-10 suit take to ship?The estimated ship time is approximately two to three weeks after the design, sizing, and custom options are approved.
Are custom Sabelt suits returnable?No, custom and special-order suits are not eligible for return once ordered.
Stand21
Stand 21 Porsche Motorsport La Couture HSC Driver Race Suit
$5,625.00
Stand21 Porsche Motorsport La Couture HSC Fire Suit
The Stand21 Porsche Motorsport La Couture HSC Fire Suit combines officially licensed Porsche Motorsport styling with Stand21’s premium fire-resistant racewear technology. Designed for Porsche drivers who want authentic motorsport branding, lightweight comfort, and professional-level protection, this suit delivers a clean factory-inspired look with the performance features needed for serious track use.
Constructed from Stand21’s exclusive pAIRformance® fabric, the La Couture HSC is built to be lightweight, breathable, and stretchable. Its dual-layer construction provides certified fire protection while helping reduce bulk and improve driver comfort during long sessions in the car.
Stand21 Porsche Motorsport La Couture HSC Details
FIA 8856-2018 homologated
SFI 3.2A Level 5 homologated
SFI patch is available for an additional fee
Dual-layer construction using exclusive Stand21 pAIRformance® fabric
Lightweight, stretchable, and breathable design
Ample stretch panels in multiple areas for improved comfort
Aramid stretchable sleeve gussets for enhanced mobility
Pre-formed sleeves for comfort in the driving position
Official Porsche Motorsport branding
Available in men’s and women’s sizing
Lightweight Comfort For Porsche Drivers
The La Couture HSC suit is designed around comfort in the cockpit. Stretch panels and pre-formed sleeves help the suit move naturally with the driver, especially when seated and strapped into a racing harness. The breathable pAIRformance® fabric helps improve airflow and comfort, making this suit an excellent choice for Porsche club racing, HPDE, time trial, and track-day use.
Official Porsche Motorsport Style
With bold Porsche Motorsport graphics, premium accent striping, and authentic Stand21 construction, this fire suit delivers the look of professional Porsche racewear with the protection and comfort expected from a high-quality motorsport suit. Available in black or white, it is built for drivers who want their safety gear to match their Porsche Motorsport passion.
A Note About Special-Order Suits
The Stand21 Porsche Motorsport La Couture HSC Driver Race Suit is available by special order only. Estimated ship time is approximately three to four weeks. Special-order suits are not eligible for return.
Stand21 Porsche Motorsport La Couture HSC Fire Suit FAQs
Is the Stand21 Porsche Motorsport La Couture HSC Fire Suit FIA approved?Yes, this suit is FIA 8856-2018 homologated.
Is this suit SFI rated?Yes, the suit is SFI 3.2A Level 5 homologated. The SFI patch is available for an additional fee.
What fabric is used in this suit?The suit uses Stand21’s exclusive stretchable and breathable pAIRformance® fabric.
Is this suit available in men’s and women’s sizes?Yes, the Stand21 Porsche Motorsport La Couture HSC Fire Suit is available in both men’s and women’s sizing.
How long does this suit take to ship?This is a special-order suit with an estimated ship time of approximately three to four weeks.
Â
Stilo S.r.l.
Stilo Venti WRC 8860-2018 Carbon Fiber Helmet
$4,993.00
Stilo Venti WRC 8860-2018 Carbon Fiber Racing Helmet
The Stilo Venti WRC 8860-2018 Carbon Fiber Racing Helmet combines professional-level motorsport protection with the advanced communications technology that has made Stilo a leading choice in rally competition. Constructed from lightweight carbon fiber and homologated to the demanding FIA 8860-2018 standard, the Venti WRC Carbon is engineered for drivers and co-drivers who demand maximum protection without unnecessary weight.
Stilo utilizes its innovative PURO technology to eliminate the traditional final clear-coat layer from the carbon shell. This reduces weight while leaving the distinctive exposed carbon fiber construction visible and maintaining the helmet's exceptional strength and protection.
FIA 8860-2018 Certified Carbon Fiber Construction
The Stilo Venti WRC Carbon Fiber Helmet is homologated to the FIA 8860-2018 helmet standard and built specifically for serious motorsport competition. Its lightweight carbon fiber shell provides an exceptional balance of strength, protection and comfort for demanding rally, road racing and competition environments.
The compact carbon shell construction helps reduce overall helmet weight while maintaining the structural performance expected from a professional-grade Stilo helmet
Â
Advanced Stilo WRC Communication System
The Venti WRC continues Stilo's long history of purpose-built rally helmets with integrated communications. The updated communication port is designed to accept Stilo's WL wireless key, allowing compatible wireless communication between driver and co-driver without interfering with FHR posts or restraint straps.
The Stilo WL wireless key is sold separately.
A redesigned microphone boom uses updated geometry to improve microphone positioning, visibility and sound quality. The integrated communications system helps keep the helmet installation clean while allowing the driver and co-driver to remain focused during competition.
Stilo Venti WRC Carbon Helmet Features
FIA 8860-2018 homologated racing helmet
Lightweight carbon fiber shell construction
Stilo PURO technology eliminates the traditional final clear-coat layer to reduce weight
Integrated Stilo WRC communication electronics
Compatible with Stilo WL wireless communication key
Redesigned microphone boom for improved positioning and sound quality
Ventilation system designed to improve airflow and driver comfort
Removable interior padding for easier cleaning and maintenance
Adjustable visor for changing driving and visibility conditions
Factory-installed HANS/FHR post anchors
Designed for professional rally and motorsport competition
Lightweight Comfort for Long Competition Stages
Weight, airflow and fit become increasingly important during long stages and extended track sessions. The Venti WRC combines its lightweight carbon construction with an effective ventilation system to help move air through the helmet and keep the driver more comfortable in demanding conditions.
The removable interior padding can be removed for cleaning, helping maintain a fresh and comfortable interior throughout the racing season.
Factory-Fitted HANS Post Anchors
The Stilo Venti WRC Carbon Fiber Helmet is supplied with factory-fitted HANS/FHR post anchors as standard, making it ready for use with compatible head-and-neck restraint systems.
Helmet Fit and Measuring
Proper helmet fit is essential for comfort and protection. Use a flexible measuring tape to measure the circumference of your head approximately one inch above the eyebrows. Continue the tape around the widest portion at the back of your head and return to the starting point.
Take two or three measurements and use the largest measurement when selecting your helmet size.
Stilo Venti WRC 8860-2018 Carbon Fiber Helmet Sizing Chart
Questions & Answers
Is the Stilo Venti WRC Carbon FIA certified?Yes. This helmet is homologated to the FIA 8860-2018 helmet standard.
Does the Stilo Venti WRC Carbon include HANS posts?Yes. Factory-fitted HANS/FHR post anchors are supplied as standard.
Does this helmet have built-in communications?Yes. The Venti WRC features Stilo's integrated rally communication electronics and an updated communication connection designed for the Stilo WL wireless system.
Is the Stilo WL wireless key included?No. The Stilo WL wireless key is sold separately.
Can the helmet interior be removed for cleaning?Yes. The interior padding is removable, allowing it to be cleaned and maintained between events.
What is Stilo PURO technology?PURO technology eliminates the traditional final clear-coat layer from the carbon fiber shell, reducing unnecessary weight while retaining the helmet's carbon fiber construction and protection.
Does this helmet require a signature when delivered?Yes. This helmet ships with signature-required delivery.
Â
Alpinestars
Alpinestars TechVision V3 Custom Driver Race Suit
$5,197.00
Alpinestars TechVision V3 Custom Driver Race Suit by Competition Motorsport
The Alpinestars TechVision V3 Custom Driver Race Suit is built for drivers who want professional-level safety, performance, and a completely personalized look. If you have ever wanted an Alpinestars race suit designed specifically for you, the TechVision V3 delivers a fully customizable solution with premium protection, lightweight comfort, and the ability to match your team, car, sponsor package, or race series requirements.
The TechVision V3 FIA/SFI suit is a lightweight and breathable three-layer race suit designed for drivers looking for a professional image and a high level of racing performance. Its outer shell is constructed from a core-spun yarn composed of fire-retardant polyester and aramidic Nomex® material, providing excellent heat and flame resistance while helping keep overall suit weight as low as possible.
Alpinestars TechVision V3 Race Suit Details
FIA 8856-2018 approved
SFI rated driver race suit
Lightweight, breathable three-layer construction
Outer shell made from fire-retardant polyester and aramidic Nomex® material
Revised aramidic lining for improved comfort and breathability
Nomex® stretch panels for flexibility in the driving position
Formula 1-derived stretch panel technology for enhanced mobility
Floating sleeve inserts for improved arm movement
Stretch panels in the lumbar area and crotch for comfort while seated
Lightweight cuff construction to reduce bulk and weight
Custom colors, patterns, logos, and personalized design options available
Available in standard off-the-rack sizing or made-to-measure sizing
Fully Custom Alpinestars Suit Design
The Alpinestars TechVision V3 can be tailored to your specific needs, allowing you to select primary, secondary, and tertiary colors while adding custom logos, manufacturer logos, series logos, sponsor graphics, name placement, flag details, and more. Whether you need a clean professional design or a fully branded team suit, Competition Motorsport can help build a TechVision V3 suit that matches your racing program and personal style.
Built For Professional Racing And Club Racing
Whether you compete in IMSA, WEC, Ferrari Challenge, Porsche Club Racing, SCCA, NASA, or another racing series, the TechVision V3 can be configured to meet your needs. Competition Motorsport has experience creating custom suits for drivers across a wide range of racing programs and can help place series logos, sponsor logos, and required markings in the proper locations for compliance and presentation.
If you are not racing in a pro or semi-pro series, the TechVision V3 is also an excellent option for drivers who simply want a premium custom fire suit tailored to their body and built to match their car, helmet, livery, or team colors.
Alpinestars TechVision V3 Custom Options Include
Name on suit
Country flag belt
Choice of boot cuff or standard cuff
Made-to-measure sizing or standard off-the-rack sizing
Custom colors and patterns
Custom sponsor, team, manufacturer, and series logos
Comfort In The Driving Position
The TechVision V3 is engineered for comfort behind the wheel. Nomex® stretch panels are strategically placed in key areas, including the floating sleeve inserts, lumbar area, and crotch, to improve flexibility while seated in the car. These Formula 1-derived stretch panels help provide freedom of movement in the areas drivers need most, reducing restriction while maintaining a professional fit and feel.
Important Pricing And Ordering Notes
The Alpinestars TechVision V3 Custom Driver Race Suit is a special-order product and is estimated to ship in approximately six to eight weeks. Returns are not accepted on special-order custom suits.
The standard price includes basic customization, colors, and patterns. After your order is placed, a custom suit specialist from Competition Motorsport will contact you to confirm sizing, colors, series compliance, logo placement, and other design details. You will be sent a measurement chart and may submit photos of your car livery, sponsor logos, example suits, or other references to help create the artwork for your custom suit.
A proof will be sent for review, revisions, and approval before production. Once the final design, colors, sizing, logos, and options are approved, the final cost of your custom suit will be confirmed with a supplemental invoice. Final pricing may vary depending on the number of logos, complexity of the design, custom colors, and additional options selected.
Alpinestars TechVision V3 Custom Driver Race Suit FAQs
Can I customize the colors of the Alpinestars TechVision V3 suit?Yes, the TechVision V3 can be customized with primary, secondary, and tertiary colors, along with custom patterns and design layouts.
Can I add sponsor logos to the suit?Yes, sponsor logos, manufacturer logos, series logos, team logos, and personal branding can be added as part of the custom design process.
Is made-to-measure sizing available?Yes, the TechVision V3 can be ordered in standard off-the-rack sizing or made-to-measure sizing.
How long does a custom Alpinestars TechVision V3 suit take to ship?The estimated ship time is approximately six to eight weeks after design, sizing, and customization details are approved.
Can the suit be designed to match my race car livery?Yes, you can submit photos of your livery, existing suit examples, sponsor artwork, and other references to help create a custom design that matches your car or team branding.
Are custom suits returnable?No, custom and special-order suits are not eligible for return once ordered.
Stilo S.r.l.
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet
$2,952.00
$4,220.00
Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet
FIA 8860 Certification valid thru 2032 for these ST5 GT 8860 Carbon Fiber Helmets
The Stilo ST5 GT 8860-2018 Carbon Fiber Racing Helmet is one of Stilo's most iconic and versatile closed-face racing helmets. Crafted from a carbon fiber layup and certified to the demanding FIA 8860-2018 standard, the ST5 GT is designed for drivers competing across a wide range of professional and high-level motorsports.
Building on the successful ST4 helmet platform, the ST5 GT introduces a larger eyeport, improved interior fit system, integrated accessory ports, and extensive compatibility with communications, hydration, and forced-air systems.
Lightweight Carbon Fiber Construction
The Stilo ST5 GT uses a lightweight carbon fiber shell designed to provide exceptional protection while reducing unnecessary weight on the driver's head and neck.
Small shell weight: approximately 3.13 lbs
Large shell weight: approximately 3.39 lbs
Two dedicated shell sizes for improved fit and reduced weight
Using separate small and large shell configurations allows Stilo to create a more proportional helmet rather than relying on excessive interior padding to accommodate different head sizes.
FIA 8860-2018 Certified Protection
The ST5 GT Carbon is FIA 8860-2018 certified, making it suitable for a wide variety of high-level motorsport applications where advanced FIA helmet certification is required.
The FIA 8860 standard is designed for professional competition and represents one of the most demanding helmet standards used in motorsports.
Integrated Side Accessory Ports
One of the defining features of the Stilo ST5 GT is the integrated side-port system located on both sides of the helmet. These ports allow drivers to configure the helmet around their specific racing requirements while keeping accessories neatly integrated into the helmet.
Compatible systems and accessories include:
Integrated communication systems
Forced-air systems
Hydration and drink systems
Combined communications, air, and hydration configurations
Stilo designed these systems to integrate seamlessly with the ST5 platform, making the ST5 GT one of the most customizable racing helmets available.
Larger Eyeport and 3mm Anti-Fog Visor
Compared with the earlier ST4 helmet platform, the ST5 features a larger eyeport designed to open beyond the driver's normal line of sight for improved visibility inside the cockpit.
The helmet comes standard with a 3mm clear visor featuring Stilo's anti-fog coating.
A variety of additional visor options are also available separately, allowing drivers to configure the helmet for different lighting and racing conditions.
Removable Interior Padding
Stilo improved the ST5 interior with removable cheek pads and removable top padding, allowing drivers to fine-tune the fit of the helmet.
The helmet also comes standard with removable earmuff cushions designed to isolate the ears and create a significantly quieter environment inside the helmet.
This is particularly beneficial for drivers using integrated communications or competing in loud closed-cockpit race cars.
Designed for Communications, Air and Hydration
The ST5 GT is designed from the outset to accommodate multiple driver-support systems without requiring a collection of externally mounted components.
The helmet can be configured for:
Integrated electronics
Driver communications
Air supply
Hydration systems
Multiple systems used together
This versatility makes the ST5 GT particularly well suited to GT racing, endurance racing, touring cars, and other closed-cockpit motorsports.
Stilo ST5 GT 8860-2018 Carbon Helmet Features
FIA 8860-2018 certified
Carbon fiber shell construction
Approximately 3.13 lbs in the small shell
Approximately 3.39 lbs in the large shell
Two separate shell sizes for improved fit and reduced weight
Integrated side accessory ports
Ready for integrated electronic communication systems
Compatible with forced-air systems
Compatible with hydration and drink systems
Communications, air, and hydration systems can be combined
Larger eyeport compared with the ST4 platform
3mm clear visor included
Anti-fog visor coating
Removable cheek pads
Removable top padding
Removable earmuff cushions for improved noise isolation
HANS posts included
Additional aero accessories available
Top-air kits available separately
Multiple visor options available separately
Built for Professional Motorsport
The Stilo ST5 GT Carbon combines advanced FIA protection with lightweight carbon construction and one of the most adaptable accessory systems available in a racing helmet.
Its combination of integrated communications capability, forced-air compatibility, hydration support, improved visibility, customizable interior padding, and FIA 8860-2018 certification makes it an excellent choice for drivers who need a professional-level helmet that can be configured around their race car and competition environment.
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Sizing Chart
For the most accurate fit, measure around the largest part of your head approximately one inch above your eyebrows and around the widest point at the back of your head. Take the measurement several times and use the largest result when selecting your helmet size.
View our Auto Racing Helmet Buyer's Guide for additional helmet sizing and fit information.
Stilo ST5 GT 8860-2018 FAQs
What certification does the Stilo ST5 GT Carbon have?The Stilo ST5 GT Carbon is FIA 8860-2018 certified.
How much does the Stilo ST5 GT Carbon weigh?The small shell weighs approximately 3.13 lbs, while the large shell weighs approximately 3.39 lbs.
Is the Stilo ST5 GT made from carbon fiber?Yes. The helmet is constructed using a carbon fiber layup designed to provide high-level protection while minimizing helmet weight.
Does the Stilo ST5 GT include a visor?Yes. It comes standard with a 3mm clear visor featuring an anti-fog coating.
Can communications be installed in the ST5 GT?Yes. The integrated side ports are designed to accommodate compatible Stilo electronic communication systems.
Can the ST5 GT use a forced-air system?Yes. The helmet is designed to accept compatible air-supply systems and optional top-air kits.
Can I use a hydration system with the ST5 GT?Yes. Compatible drink and hydration systems can be integrated into the helmet.
Can communications, air, and hydration be used together?Yes. The ST5 GT is designed so integrated electronics, air supply, and hydration systems can be used individually or in combination.
Are the interior pads removable?Yes. The cheek pads and top pads are removable, allowing drivers to better customize the helmet fit.
Does the ST5 GT include HANS posts?Yes. HANS posts are included with the helmet.
Â
Â
Bell Racing Helmets
Bell HP10 Rally FIA 8860-2018 Carbon Fiber Rally Helmet
$4,220.00
Bell HP10 Rally FIA 8860-2018 Carbon Fiber Rally Helmet
The Bell HP10 Rally Helmet is a professional-level open-face rally helmet engineered for drivers and co-drivers who demand exceptional protection, communication clarity, and comfort. Drawing technology from Bell's advanced HP helmet platform, the HP10 Rally combines an ultra-lightweight carbon fiber shell with FIA 8860-2018 homologation and an integrated ZeroNoise communication system.
Designed specifically for demanding rally environments, the HP10 Rally incorporates high-power speakers, a noise-cancelling microphone, sound-insulating ear protection, and a heavy-duty Nexus connector directly into the helmet. A removable carbon Half Chin-Bar, adjustable carbon sun peak, integrated sunscreen, and factory-installed HANS anchors complete a helmet built for serious competition.
FIA 8860-2018 Carbon Fiber Protection
The Bell HP10 Rally is constructed around an advanced full carbon fiber shell engineered to provide extremely high levels of impact protection while minimizing overall helmet weight.
An advanced multi-piece, multi-density energy-management liner works with the carbon shell to help manage impact forces during competition. The HP10 Rally is homologated to the demanding FIA 8860-2018 helmet standard for professional motorsport use.
Integrated ZeroNoise Rally Communications
Bell developed the HP10 Rally communication system with input from audio specialists and professional rally competitors. ZeroNoise electronics are integrated directly into the helmet to provide dependable driver-to-co-driver communication without requiring bulky headset components.
High-power speakers and a noise-cancelling microphone help maintain clear communication inside loud competition vehicles, while flexible sound-insulating ear muffs help reduce unwanted cockpit noise.
Heavy-Duty Nexus Connector
An integrated heavy-duty female Nexus connector provides a secure interface for compatible professional rally intercom systems. The connector is molded into the helmet for a clean installation and dependable connection during competition.
Fast Removable Carbon Half Chin-Bar
The Bell HP10 Rally features a lightweight removable carbon Half Chin-Bar (HCB) that provides additional facial protection while maintaining the versatility of an open-face rally helmet.
The Half Chin-Bar can be quickly detached when necessary, providing faster access to the driver's airway during an emergency.
Adjustable Carbon Fiber Sun Peak and Sunscreen
An adjustable carbon fiber sun peak helps reduce glare without adding unnecessary weight. The HP10 Rally also incorporates an adjustable anti-scratch internal sunscreen system for changing lighting and weather conditions.
An ML Red Mirror M10S Short sunscreen is installed as standard equipment, while a Dark Smoke M10 Long sunscreen is supplied with the helmet.
Professional Rally Comfort
The interior features dark grey high-strength Comfort FR fabric designed for demanding motorsport environments. Removable cheek pads use advanced multi-density materials to provide a secure, comfortable fit during extended competition.
Air extraction openings help remove warm air from inside the helmet, while the sound-insulating ear system helps improve both comfort and communication quality.
Bell HP10 Rally Helmet Features
FIA 8860-2018 homologated
Ultra-lightweight advanced full carbon fiber shell
Matte exposed-carbon finish
Professional open-face rally helmet design
Integrated ZeroNoise communication electronics
High-power integrated speakers
Noise-cancelling microphone integrated into the Half Chin-Bar
Flexible sound-insulating ear protection
Heavy-duty integrated female Nexus connector
Fast removable carbon Half Chin-Bar
Advanced multi-density, multi-piece impact liner
Factory-installed HANS anchors
Adjustable carbon fiber sun peak
Adjustable integrated anti-scratch sunscreen system
ML Red Mirror M10S Short sunscreen installed
Dark Smoke M10 Long sunscreen included
Removable multi-density cheek pads
Dark grey high-strength Comfort FR interior
Air extraction openings for improved ventilation
Bell HP10 Rally Helmet Specifications
Manufacturer: Bell Helmets
Model: HP10 Rally
Helmet Type: Open-face rally helmet
Shell Material: Advanced carbon fiber
Finish: Matte carbon
Homologation: FIA 8860-2018
Communication System: Integrated ZeroNoise
Connector: Heavy-duty female Nexus connector
Microphone: Integrated noise-cancelling microphone
Speakers: Integrated high-power speakers
Chin Protection: Removable carbon Half Chin-Bar
Sun Peak: Adjustable carbon fiber
Sunscreen: Adjustable integrated anti-scratch system
HANS Anchors: Factory installed
Interior: Dark grey high-strength Comfort FR fabric
Available Sizes: 54, 55, 56, 57, 58, 59, 60, 61 and 61+
Bell HP10 Rally Helmet Options
Optional interior colors available by special order
Interior color options include Tan, White, Red, Purple, Blue, Green and Neon Yellow
Optional sunscreen colors available
Multiple sunscreen lengths available for personalized visibility and coverage
Designed for Professional Rally Competition
The Bell HP10 Rally is purpose-built for rally drivers and co-drivers who need premium protection and dependable communication in extremely demanding environments. The combination of FIA 8860-2018 protection, advanced carbon fiber construction, integrated ZeroNoise electronics, removable Half Chin-Bar, professional Nexus connectivity, and premium interior materials makes it a complete rally helmet system for serious competition.
Bell HP10 Rally Sizing Chart
Questions & Answers
What certification does the Bell HP10 Rally Helmet have?The Bell HP10 Rally is homologated to the FIA 8860-2018 motorsport helmet standard.
Is the Bell HP10 Rally made from carbon fiber?Yes. The helmet uses an advanced full carbon fiber shell with a matte exposed-carbon finish.
Does the Bell HP10 Rally have built-in communications?Yes. ZeroNoise electronics, high-power speakers, and a noise-cancelling microphone are integrated into the helmet.
What type of intercom connector does the HP10 Rally use?The helmet features a heavy-duty integrated female Nexus connector for compatible professional rally intercom systems.
Does the Bell HP10 Rally include a removable chin bar?Yes. It includes a removable carbon Half Chin-Bar that can be quickly detached when necessary.
What sunscreen comes with the Bell HP10 Rally?An ML Red Mirror M10S Short sunscreen is installed, and a Dark Smoke M10 Long sunscreen is supplied with the helmet.
Does the Bell HP10 Rally include HANS anchors?Yes. Factory-installed HANS anchors are included.
Is the sun peak adjustable?Yes. The HP10 Rally features an adjustable carbon fiber sun peak.
Are different interior colors available?Yes. Tan, White, Red, Purple, Blue, Green, and Neon Yellow interiors are available by special order.
What sizes are available?The Bell HP10 Rally is available in sizes 54 through 61+.
Is the Bell HP10 Rally designed specifically for rally racing?Yes. Its open-face design, integrated communications, sound insulation, removable chin protection, and professional intercom connectivity are specifically suited to rally drivers and co-drivers.
Sparco S.p.A.
Sparco Prime RF-10 Supercarbon |FIA 8860-2018
$4,218.00
Sparco Prime RF-10 Supercarbon FIA 8860-2018 Racing Helmet
The Sparco Prime RF-10 Supercarbon Racing Helmet is a premium carbon fiber auto racing helmet engineered for competitors who demand exceptional protection, lightweight construction, ventilation, and comfort. Designed for serious motorsport use, the Prime RF-10 Supercarbon combines an advanced carbon fiber shell with FIA 8860-2018 and Snell SA2020 certification.
A center visor locking system provides secure shield closure, while strategically positioned front air intakes and top exhaust vents help circulate air through the helmet and reduce heat and condensation. The removable interior lining can be taken out for cleaning, and factory-installed FHR posts provide compatibility with head-and-neck restraint systems.
FIA 8860-2018 Carbon Fiber Protection
The Sparco Prime RF-10 Supercarbon is constructed from carbon fiber to provide an exceptionally strong yet lightweight helmet shell. Its professional-level construction is designed for demanding motorsport environments where protection, weight reduction, and driver comfort are critical.
The helmet is approved to both FIA 8860-2018 and Snell SA2020 standards, making it suitable for a wide range of competitive auto racing applications where these certifications are accepted.
Advanced Helmet Ventilation
Front air intakes direct airflow through the helmet to help keep the driver comfortable and improve visor clarity during competition. Upper ventilation openings work as exhaust ports, allowing excess heat and moisture to escape from inside the helmet.
This ventilation system is especially beneficial during long sessions and high-temperature racing conditions where heat buildup and visor condensation can become distracting.
Secure Center Visor Locking System
The Sparco Prime RF-10 Supercarbon incorporates a center visor locking mechanism designed to provide a positive and secure visor closure while racing.
The helmet is supplied with a clear FIA-approved visor. A dark smoke visor is available separately for drivers who prefer reduced glare in bright conditions.
Removable and Washable Interior
The interior lining can be removed from the helmet for easier cleaning and maintenance. This allows racers to keep the helmet interior fresh after demanding race weekends, track days, and endurance events.
Drink System Ready
The Prime RF-10 Supercarbon is designed to accommodate an optional driver hydration system, allowing racers to integrate a drink setup for longer competition sessions and endurance racing.
Factory-Installed FHR Posts
Factory-fitted FHR posts are included with the helmet for compatibility with appropriate head-and-neck restraint systems.
Sparco Prime RF-10 Supercarbon Helmet Features
FIA 8860-2018 approved
Snell SA2020 approved
Advanced carbon fiber shell construction
Lightweight professional racing helmet design
Clear FIA-approved visor included
Center visor locking mechanism
Infinitely adjustable visor positioning
Front ventilation system promotes airflow through the helmet
Top exhaust ventilation helps remove heat and condensation
Removable interior lining for easier cleaning
Compatible with an optional driver drink system
Factory-installed FHR posts
Optional dark smoke visor available separately
Sparco Prime RF-10 Supercarbon Technical Specifications
Manufacturer: Sparco
Model: Prime RF-10 Supercarbon
Helmet Type: Full-face auto racing helmet
Shell Material: Carbon fiber
Certification: FIA 8860-2018
Snell Certification: SA2020
Visor: Clear FIA-approved visor included
Visor Lock: Center locking mechanism
Ventilation: Front air intakes with upper exhaust ventilation
Interior: Removable and washable lining
FHR Posts: Factory installed
Drink System: Optional system compatible
What's Included
Sparco Prime RF-10 Supercarbon racing helmet
Clear FIA-approved visor
Factory-installed FHR posts
Please Note: The Sparco Prime RF-10 Supercarbon is supplied with a clear visor. Images showing a dark smoke visor may feature the optional dark smoke visor, which is sold separately.
Sparco Prime RF-10 Supercarbon Sizing Chart
Sparco Prime RF-10 Supercarbon Questions & Answers
What certifications does the Sparco Prime RF-10 Supercarbon have?The helmet is approved to FIA 8860-2018 and Snell SA2020 standards.
Is the Sparco Prime RF-10 Supercarbon made from carbon fiber?Yes. The helmet uses a lightweight carbon fiber shell engineered for high-level motorsport protection.
What visor comes with the Sparco Prime RF-10 Supercarbon?The helmet is supplied with a clear FIA-approved visor.
Is the dark smoke visor included?No. The dark smoke visor shown in some product images is optional and sold separately.
Does the visor lock in the center?Yes. The Prime RF-10 Supercarbon uses a center visor locking mechanism designed to provide a secure visor closure.
Is the visor adjustable?Yes. The visor can be adjusted through its available opening range to suit driver preference and ventilation needs.
How is the Sparco Prime RF-10 Supercarbon ventilated?Air intakes at the front of the helmet direct airflow through the interior, while upper exhaust vents help remove heat and condensation.
Can the interior lining be removed?Yes. The helmet features a removable interior lining that can be taken out for cleaning.
Does the Sparco Prime RF-10 Supercarbon include FHR posts?Yes. Factory-installed FHR posts are included.
Can a drink system be installed?Yes. The helmet is designed to accommodate an optional driver hydration system.
How do I choose the correct Sparco Prime RF-10 Supercarbon size?Measure the circumference of your head with a flexible measuring tape and compare the measurement with the Sparco helmet sizing chart.
Should I replace the helmet after a crash?A racing helmet that has sustained a significant impact should be removed from service and evaluated or replaced according to the manufacturer's recommendations.
Stand21
Stand 21 Porsche Motorsport ST221 Air-S Driver Race Suit
$4,500.00
Stand21 Porsche Motorsport ST221 Air-S Driver Race Suit
Officially-licensed Porsche Motorsport safety gear is now available at Competition Motorsport. The Stand21 ST221 Air-S offers extremely lightweight performance in a three-layer suit built just for the Porsche Motorsport enthusiast.
Stand21 Porsche Motorsport ST221 Air-S Race Suit Features:
FIA 8856-2018 homologated
SFI 3.2A/5 homologated (SFI patch is an additional fee, please call (844) 438-7244)
Three-layer construction
Lumbar stretch panel for comfort in the racing position
Tailored pockets
Soft and comfortable collar
Fully-floating pre-formed sleeves for comfort while in the driving position
See size chart below to select proper sizing
A Note About Stand21 Special-Order Suits
The Stand21 Porsche Motorsport ST221 Air-S Driver Race Suit is available only by special-order, which may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us at (844) 438-7244 with sizing and other questions.
Chillout Systems
Chillout Systems Quantum v3 Cooler
$4,220.00
Chillout Systems Quantum Cooler
Â
Finally! No more dragging around bags of ice and gallons of water for your driver cooling!
The Chillout Systems Quantum Cooler is the most powerful, portable iceless cooling system ever designed for auto racing. Requiring no ice or water, this driver cooling system is completely maintenance-free, running solely off a rotary micro-compressor that is as powerful as other compressors five times its size!
Pumping Chillout's proprietary coolant formula at a rate of 20 liters per minute at 16 psi through specially-designed cooling apparel, this system is electronically limited to cool to 40º F (5º C) despite being capable of cooling much lower than that.
The Chillout Systems Quantum Cooler is simple to use while offering more customizable features than ever before, including five temperature settings that accommodate varying race-day conditions and a bright, easy-to-read digital display.
Weighing less than 11 pounds, the Chillout Systems Quantum Cooler is portable and hot-swappable, so you can quickly move it from one mounting location to another within seconds. A dash-mountable digital control/display is available for installations where the system is beyond the driver's reach.
IN THE BOX
Quantum Cooler
Mounting Tray
Wiring Harness
Locking Ball Pins
Ducting plenum (shown) sold separately.
Â
Stand21
Stand 21 Porsche Motorsport ST221 HSC Evo Driver Race Suit
$3,796.00
Stand21 Porsche Motorsport ST221 HSC Evo Race Suit
Officially Licensed Porsche Motorsport Racing Suit
The Stand21 Porsche Motorsport ST221 HSC Evo Race Suit brings officially licensed Porsche Motorsport styling together with professional-level safety, comfort, and performance. Built by Stand21, one of the most respected names in racing safety equipment, the ST221 HSC Evo is designed for Porsche Motorsport enthusiasts who want a premium driver suit with proven protection and refined comfort.
With FIA and SFI homologation, dual-layer construction, floating sleeves, and driver-focused fit details, this Porsche Motorsport race suit is built for serious track use while delivering the clean, high-end look Porsche drivers expect.
FIA And SFI Homologated Protection
The Stand21 ST221 HSC Evo Driver Suit is FIA 8856-2018 homologated and SFI 3.2A Level 5 homologated. This makes it suitable for a wide range of motorsport applications that require modern fire-resistant racewear certification.
The SFI patch is available for an additional fee. Because this suit is a special-order item, confirm sizing and sanctioning body requirements before ordering.
Dual-Layer Construction With Driver Comfort
The ST221 HSC Evo uses dual-layer construction to provide fire protection while maintaining comfort and mobility. Stand21 designed this suit to offer exceptional body-heat transfer, helping drivers stay more comfortable during long sessions in the car.
A soft, comfortable collar improves fit around the neck, while tailored pockets keep the suit practical without adding unnecessary bulk.
Built For The Driving Position
The lumbar stretch panel helps improve comfort while seated in the racing position. Fully-floating pre-formed sleeves allow better arm movement while steering, shifting, and working inside the cockpit, helping reduce restriction during demanding driving sessions.
Stand21 ST221 HSC Evo Driver Suit Details
Officially licensed Porsche Motorsport racing suit
FIA 8856-2018 homologated
SFI 3.2A Level 5 homologated
SFI patch available for an additional fee
Dual-layer construction
Exceptional body-heat transfer
Lumbar stretch panel for comfort in the racing position
Fully-floating pre-formed sleeves
Soft and comfortable collar
Tailored pockets
Porsche Motorsport styling
Special-order item
Special-Order Suit Information
This Stand21 Porsche Motorsport ST221 HSC Evo Race Suit is a special-order fire suit. Special-order suits may take approximately two to three weeks to ship.
Returns are not accepted on special-order suits, so sizing should be confirmed before placing your order.
Why Choose The Stand21 Porsche Motorsport ST221 HSC Evo Race Suit?
The Stand21 Porsche Motorsport ST221 HSC Evo Race Suit is ideal for Porsche drivers who want officially licensed racewear with professional homologation, premium comfort, and authentic Porsche Motorsport style. With FIA 8856-2018 approval, SFI 3.2A/5 homologation, dual-layer construction, a lumbar stretch panel, and floating pre-formed sleeves, the ST221 HSC Evo is built for drivers who expect both safety and refinement.
Frequently Asked Questions
Q: Is the Stand21 Porsche Motorsport ST221 HSC Evo FIA approved?A: Yes. The ST221 HSC Evo Race Suit is FIA 8856-2018 homologated.
Q: Is this suit SFI approved?A: Yes. The suit is SFI 3.2A Level 5 homologated. The SFI patch is available for an additional fee.
Q: Is this an officially licensed Porsche Motorsport suit?A: Yes. This is officially licensed Porsche Motorsport safety gear from Stand21.
Q: What construction does the suit use?A: The ST221 HSC Evo uses dual-layer construction for fire protection, comfort, and body-heat transfer.
Q: Does the suit have floating sleeves?A: Yes. It features fully-floating pre-formed sleeves for comfort and freedom of movement in the driving position.
Q: Is this suit special order?A: Yes. This is a special-order fire suit and may take approximately two to three weeks to ship.
Q: Can special-order suits be returned?A: No. Returns are not accepted on special-order suits.
Â
Bell Racing Helmets
Bell HP6 RD-4C/EC FIA 8860-2018 Carbon Fiber Racing Helmet
$3,882.00
Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet
The Bell HP6 RD-4C/EC Carbon Fiber Racing Helmet is a professional-level closed-cockpit helmet engineered for drivers who need maximum protection, integrated communications, and hydration capability. Developed using technology from Bell's flagship HP7 platform, the HP6 combines an ultra-lightweight advanced carbon fiber shell with FIA 8860-2018 homologation for demanding professional motorsports applications.
The RD-4C/EC configuration takes the HP6 platform further with an integrated radio communication system, electronic earcup speakers, and hydration system. This makes it particularly well suited for endurance racing, GT competition, touring cars, and other closed-cockpit environments where clear communication and driver hydration are critical.
Bell HP6 RD-4C/EC FIA 8860-2018 Helmet Overview
The Bell HP6 was developed specifically for closed-cockpit racing. Its wide eyeport provides excellent forward and peripheral visibility while the advanced carbon fiber shell keeps overall helmet weight to a minimum.
An advanced multi-density, multi-piece energy-absorbing liner provides the impact-management performance required for FIA 8860-2018 homologation. Factory-installed HANS anchors allow the helmet to be used with compatible head-and-neck restraint systems without requiring additional anchor installation.
Integrated Radio Communication and Hydration
The RD-4C/EC version of the Bell HP6 is designed for racers who need communication and hydration equipment integrated directly into the helmet. Electronic speakers are installed within earcups to provide improved audio performance while helping isolate the driver from cockpit noise.
The helmet also incorporates a hydration system and dedicated internal routing for communication and drinking components. Integrating these systems into the helmet helps reduce loose wiring and tubing around the driver's head and cockpit.
Integrated radio communication system
Electronic earcup speakers
Earcups help provide increased cockpit noise isolation
Integrated hydration system
Internal channels for communication and hydration components
Designed for closed-cockpit and endurance racing applications
Bell HP6 RD-4C/EC Features
Ultra-lightweight advanced full carbon fiber shell
FIA 8860-2018 homologated
Wide eyeport for improved visibility in closed-cockpit cars
Advanced multi-density, multi-piece impact liner
Integrated radio communication system
Built-in electronic earcup speakers
Integrated hydration system
Extraction vents improve cooling and air circulation
Factory-installed HANS anchors
SE06 3mm DSAF shield system
Matte carbon fiber exterior finish
Dark Grey high-strength, high-comfort FR interior fabric
Bell HP helmet bag included
Compatible with optional forced-air cooling systems
FIA 8860-2018 Advanced Carbon Fiber Construction
The HP6 RD-4C/EC uses Bell's Advanced full carbon fiber shell technology to provide exceptional strength while minimizing helmet weight. FIA 8860-2018 is designed for the highest levels of motorsports competition and requires significantly more demanding impact and performance testing than many conventional motorsports helmet standards.
The carbon shell is paired with an advanced multi-density, multi-piece liner engineered to manage impact energy while maintaining the compact fit and comfort expected from Bell's High Performance Series.
Wide Eyeport for Closed-Cockpit Racing
A wide eyeport is one of the defining features of the Bell HP6. The larger opening improves the driver's field of view, making it especially useful in GT cars, touring cars, prototypes, endurance cars, and other enclosed race vehicles where visibility can already be limited by cockpit structure and seating position.
The helmet uses Bell's SE06 3mm DSAF shield system for excellent optical clarity and anti-fog performance.
Ventilation and Forced-Air Compatibility
Multiple extraction vents help move warm air out of the helmet and improve driver comfort during extended track sessions. The HP6 can also be configured with an optional top forced-air intake mounted to either the left or right upper ventilation location.
Integrated extraction vents improve airflow
Optional top forced-air intake can be mounted on either side
Compatible with external helmet cooling systems
Quick Lock V10 forced-air components are available
Compatible with Maglock forced-air connections
Bell HP6 RD-4C/EC Specifications
Manufacturer: Bell Helmets
Model: HP6 RD-4C/EC
Manufacturer Part Number Series: 11410X
Helmet Type: Full-face closed-cockpit racing helmet
Shell Construction: Advanced full carbon fiber
Exterior Finish: Matte Carbon
Homologation: FIA 8860-2018
Interior: Dark Grey high-strength, high-comfort FR fabric
Communications: Integrated radio system with electronic earcup speakers
Hydration: Integrated hydration system
HANS Anchors: Factory installed
Shield: Bell SE06 3mm DSAF shield
Helmet Bag: Bell HP helmet bag included
Alternative interior colors including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange may be available by special order.
What's Included With the Bell HP6 RD-4C/EC
Bell HP6 RD-4C/EC FIA 8860-2018 carbon fiber racing helmet
Integrated radio communication system
Electronic earcup speakers
Integrated hydration system
Clear Bell SE06 3mm DSAF shield installed
Factory-installed HANS anchors
Plastic tear-off posts installed
Bell HP helmet bag
Hex wrench key
Bell HP6 RD-4C/EC Helmet Sizing
Measure around the largest part of the head, approximately one inch above the eyebrows and just above the ears. A racing helmet should fit firmly and evenly without creating concentrated pressure points.
Questions About the Bell HP6 RD-4C/EC
Q: What safety certification does the Bell HP6 RD-4C/EC have?A: The Bell HP6 RD-4C/EC is homologated to the FIA 8860-2018 helmet standard.
Q: What is the difference between the HP6 RD-4C/EC and a standard HP6?A: The RD-4C/EC configuration adds an integrated radio communication system, electronic earcup speakers, and hydration capability to the HP6 platform.
Q: Does the HP6 RD-4C/EC include HANS anchors?A: Yes. HANS anchors are factory installed.
Q: Does this helmet include a hydration system?A: Yes. The RD-4C/EC configuration includes integrated hydration capability designed for use during long racing sessions and endurance competition.
Q: Are speakers included?A: Yes. The RD-4C/EC version includes electronic speakers installed within earcups for radio communication and additional noise isolation.
Q: Can the Bell HP6 be connected to a forced-air cooling system?A: Yes. Optional forced-air components can connect the HP6 to an external helmet cooling system, with configurations available for the upper left or right ventilation locations.
Q: What shield does the Bell HP6 use?A: The HP6 uses the Bell SE06 3mm shield system and includes a clear DSAF shield.
Q: Is a helmet bag included?A: Yes. A Bell HP helmet bag is included with the HP6 RD-4C/EC.
```
Bell Racing Helmets
Bell HP6 8860-2018 RD-4C Carbon Fiber Helmet with Built-in Electronics/Hydration
$3,882.00
Bell HP6 RD-4C FIA 8860-2018 Carbon Fiber Racing Helmet
The Bell HP6 RD-4C Carbon Fiber Racing Helmet combines Bell's professional-level HP helmet technology with an integrated radio communication and hydration configuration designed specifically for closed-cockpit racing. Based on technology developed for Bell's HP7 platform, the HP6 features an ultra-lightweight Advanced full carbon fiber shell and is homologated to the demanding FIA 8860-2018 standard.
The RD-4C version is designed for drivers who prefer in-ear communication. Bell integrates the radio electronics, noise-cancelling microphone, communication wiring, and hydration routing directly into the helmet, eliminating the need to drill or modify the chin bar. The communication system is ready for compatible 3.5mm earbud transducers, while the integrated hydration routing provides a clean solution for endurance and long-duration racing.
Bell HP6 RD-4C FIA 8860-2018 Helmet Features
Ultra-lightweight Advanced full carbon fiber shell
FIA 8860-2018 homologated
Designed specifically for closed-cockpit racing
Wide eyeport for excellent forward and peripheral visibility
Integrated RD-4C radio communication electronics
Designed for use with compatible earbuds
3.5mm connector compatible with earplug transducers
Integrated dynamic noise-cancelling microphone
Integrated hydration routing and drinking-system connection
Advanced multi-density, multi-piece impact liner
Extraction vents maximize airflow and cooling
Compatible with optional forced-air cooling systems
Factory-installed HANS anchors
Bell SE06 3mm DSAF shield system
Dark Grey high-strength, high-comfort FR interior
Matte carbon fiber exterior finish
Bell HP helmet bag included
Integrated RD-4C Radio Communication System
The Bell HP6 RD-4C is equipped with Bell's 4-conductor IMSA-style helmet radio configuration. A dynamic noise-cancelling microphone is integrated directly into the helmet's face piece and pre-wired for use with compatible racing radio systems.
The system includes a coil-style communication cord with a heavy-duty molded 4-pin connector and a 3.5mm connection designed for compatible in-ear transducers. This makes the RD-4C an excellent choice for drivers who prefer earbuds rather than traditional helmet-mounted speakers.
Integrated 4-conductor IMSA-style communication system
Dynamic noise-cancelling microphone integrated into the face piece
Coil-style communication cable
Heavy-duty molded 4-pin connector
3.5mm connection for compatible earbud transducers
Communication components integrated without drilling the helmet
Earbuds are not included. Drivers can select compatible earplug transducers based on their radio and communication requirements.
RD-4C vs. RD-4C/EC
The Bell HP6 RD-4C and RD-4C/EC share the same FIA 8860-2018 Advanced carbon fiber helmet platform, but they use different driver audio configurations.
HP6 RD-4C: Designed for use with compatible in-ear earbuds or earplug transducers. Earbuds are not included.
HP6 RD-4C/EC: Uses integrated electronic speakers and earcups for communication and additional noise isolation.
The RD-4C is ideal for racers who prefer molded or conventional racing earbuds and want to minimize additional components around the ears.
Integrated Hydration System Routing
Long-duration and endurance racing can make driver hydration critical. The HP6 RD-4C incorporates dedicated channels and connections for hydration equipment directly into the helmet design.
The integrated system includes routing and a one-way connection for a drinking system, allowing hydration components to be installed without drilling the helmet's chin bar or modifying the face piece.
The external drinking system and bite valve are not included and must be selected separately based on the driver's hydration setup.
Advanced FIA 8860-2018 Carbon Fiber Construction
The HP6 uses Bell's Advanced full carbon fiber shell technology to combine exceptional strength with extremely low weight. The shell is paired with an advanced multi-density, multi-piece energy-absorbing liner engineered for the high impact-performance requirements of FIA 8860-2018 competition.
FIA 8860 helmets are developed for demanding professional motorsports environments where protection, weight, visibility, and driver comfort are critical.
Wide Eyeport for Closed-Cockpit Racing
The Bell HP6 was designed specifically for racers competing in enclosed vehicles. Its wide eyeport provides an expansive field of vision to help improve visibility of mirrors, instruments, competitors, and track surroundings.
This design makes the HP6 particularly well suited for GT cars, touring cars, prototypes, endurance cars, and other closed-cockpit competition vehicles.
Bell SE06 3mm DSAF Shield
The Bell HP6 uses the Bell SE06 3mm helmet shield. A clear DSAF shield is included and installed on the helmet.
Bell's DSAF shield construction is designed to provide excellent optical clarity while helping control fogging in demanding racing environments.
Bell SE06 3mm shield system
Clear DSAF shield included
Plastic tear-off posts installed
Wide eyeport design for improved visibility
Ventilation and Forced-Air Cooling Compatibility
Strategically positioned extraction vents help move warm air out of the helmet and improve circulation around the driver's head. For cars equipped with external driver cooling systems, the HP6 can also accept optional forced-air components.
A top forced-air intake can be installed on either the left or right upper ventilation location, giving racers flexibility when routing cooling hoses through different cockpit layouts.
Integrated extraction vents maximize airflow
Optional left- or right-side top forced-air connection
Compatible with external helmet cooling systems
Quick Lock V10 forced-air components available
Compatible with Maglock forced-air connections
Bell HP6 RD-4C Specifications
Manufacturer: Bell Helmets
Model: HP6 RD-4C
Part Number Series: 1140101-1140109, depending on size
Helmet Type: Full-face closed-cockpit racing helmet
Shell Construction: Advanced full carbon fiber
Exterior Finish: Matte Carbon
Homologation: FIA 8860-2018
Communication: Integrated RD-4C radio electronics for earbuds
Earbuds: Not included
Microphone: Integrated dynamic noise-cancelling microphone
Earbud Connection: 3.5mm
Hydration: Integrated routing and drinking-system connection
HANS Anchors: Factory installed
Interior: Dark Grey high-strength, high-comfort FR fabric
Shield: Bell SE06 3mm DSAF
Helmet Bag: Bell HP helmet bag included
Special-Order Interior Colors
The standard HP6 interior uses Bell's Dark Grey high-strength, high-comfort FR fabric. Alternative interior colors may be available by special order for an additional charge.
Tan
White
Red
Purple
Blue
Green
Neon Yellow
Pink
Orange
What's Included With the Bell HP6 RD-4C
Bell HP6 RD-4C FIA 8860-2018 carbon fiber racing helmet
Integrated RD-4C communication electronics
Integrated noise-cancelling microphone
Integrated hydration routing
Clear Bell SE06 3mm DSAF shield installed
Factory-installed HANS anchors
Plastic tear-off posts installed
Bell HP helmet bag
Hex wrench key
Earbuds, bite valve, and external drinking system are not included.
Bell HP6 RD-4C Helmet Sizing Chart
Read the Competition Motorsport Auto Racing Helmet Buyer's Guide for more information about measuring, helmet fit, safety standards, and selecting the correct racing helmet.
Questions About the Bell HP6 RD-4C
Q: What certification does the Bell HP6 RD-4C have?A: The Bell HP6 RD-4C is homologated to the FIA 8860-2018 helmet standard.
Q: Does the HP6 RD-4C have built-in radio electronics?A: Yes. The RD-4C has an integrated radio communication system with a noise-cancelling microphone and wiring designed for compatible in-ear transducers.
Q: Are earbuds included with the HP6 RD-4C?A: No. The RD-4C is wired for compatible earbuds or earplug transducers, but the earbuds themselves are not included.
Q: What is the difference between the HP6 RD-4C and RD-4C/EC?A: The RD-4C is designed for use with earbuds. The RD-4C/EC configuration uses electronic speakers and earcups for communication and additional noise isolation.
Q: Does the HP6 RD-4C include hydration equipment?A: The helmet includes integrated hydration routing and a drinking-system connection. The external drinking system and bite valve are not included.
Q: Does the Bell HP6 RD-4C include HANS anchors?A: Yes. HANS anchors are factory installed.
Q: Can the HP6 RD-4C be used with a forced-air cooling system?A: Yes. Optional forced-air components can be installed on the upper left or right ventilation locations for connection to an external helmet cooling system.
Q: What shield fits the Bell HP6?A: The Bell HP6 uses the Bell SE06 3mm shield system and includes a clear DSAF shield.
Q: Is a helmet bag included?A: Yes. A Bell HP helmet bag is included with the HP6 RD-4C.
```
Bell Racing Helmets
Bell Helmets HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
$3,460.00
Bell HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
The Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet brings technology developed for Bell's flagship HP7 platform into a lightweight, purpose-built helmet designed specifically for closed-cockpit racing. With its aggressive modern profile, advanced carbon fiber shell and wide eyeport, the HP6 is engineered for professional and serious amateur racers who demand maximum protection without sacrificing visibility, airflow or comfort.
Homologated to the demanding FIA 8860-2018 standard, the HP6 combines an ultra-lightweight advanced carbon shell with a multi-density, multi-piece energy-management liner. The result is a premium competition helmet designed for high-level road racing, endurance racing, GT competition and other closed-cockpit motorsports.
Advanced Carbon Fiber FIA 8860-2018 Protection
The HP6 uses Bell's advanced full carbon fiber shell construction to provide exceptional strength while minimizing helmet weight. Beneath the carbon shell is an advanced multi-density, multi-piece liner engineered to maximize energy absorption and impact performance.
FIA 8860-2018 homologation places the HP6 among Bell's high-performance competition helmets, making it an excellent choice for racers competing in series that require one of motorsport's most demanding helmet standards.
Wide Eyeport Designed for Closed-Cockpit Racing
Bell developed the HP6 specifically around the needs of drivers in closed-cockpit race cars. Its wide eyeport provides an extended field of vision, helping improve awareness of mirrors, competitors, apexes and cockpit controls.
The helmet uses Bell's SE06 3mm shield system, giving drivers access to compatible clear, tinted and specialty visor options for changing track and lighting conditions.
Advanced Ventilation and Forced-Air Compatibility
Strategically positioned extraction vents help maximize cooling and air circulation inside the HP6. For racers using external driver-cooling systems, an optional top forced-air intake can be installed on either the left or right upper ventilation ports.
Aftermarket forced-air systems are also available with Quick Lock V10 connections and compatibility with Maglock-style cooling connections, making the HP6 adaptable to a wide range of professional cockpit cooling configurations.
Integrated Communications and Hydration Capability
Integrated channels inside the HP6 face piece provide routing options for radio communication components, hydration tubes and drinking valves. This allows racers to configure the helmet for endurance racing and other applications where communication and hydration systems are essential.
Optional ear cups can also be installed to increase noise isolation inside loud closed-cockpit race cars. Racers requiring a fully integrated radio and hydration package can also consider Bell's dedicated HP6 RD configurations.
Bell HP6 8860-2018 Carbon Fiber Helmet Features
FIA 8860-2018 homologated racing helmet
Ultra-lightweight advanced full carbon fiber shell
Designed specifically for closed-cockpit racing
Wide eyeport for enhanced driver visibility
Advanced multi-density, multi-piece impact liner
Dark grey high-strength, high-comfort flame-resistant interior
Integrated channels for hydration and radio system installation
Extraction vents designed to maximize cooling and airflow
Optional top forced-air intake can be mounted on either side
Compatible with Quick Lock V10 forced-air systems
Compatible with Maglock-style cooling connections
Optional ear cups available for increased noise insulation
Factory-installed HANS anchors
Bell HP helmet bag included
Matte carbon fiber finish
Bell HP6 Helmet Details
Manufacturer: Bell Helmets
Manufacturer Part Number: 11400
Helmet Model: HP6
Construction: Advanced full carbon fiber shell
Finish: Matte carbon fiber
Homologation: FIA 8860-2018
Interior: Dark grey high-strength, high-comfort FR fabric
HANS Anchors: Factory installed
Shield Type: Bell SE06 3mm
Helmet Bag: Bell HP helmet bag included
Optional Bell HP6 Equipment
Top forced-air intake systems
Quick Lock V10 forced-air connections
Optional noise-isolating ear cups
Radio communication components
Hydration tube and drinking valve systems
Compatible Bell SE06 replacement and tinted shields
Alternative interior colors available by special order
What's Included With the Bell HP6
Bell HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
Clear Bell SE06 3mm DSAF shield installed
Factory-installed HANS anchors
Plastic tear-off posts installed
Bell HP helmet bag
Hex wrench
Bell HP6 8860-2018 Sizing Chart
Bell HP6 8860-2018 Helmet FAQs
Is the Bell HP6 FIA 8860-2018 homologated?Yes. The Bell HP6 is homologated to the FIA 8860-2018 high-performance racing helmet standard.
Is the Bell HP6 designed for closed-cockpit racing?Yes. Bell specifically developed the HP6 for closed-car environments, combining a wide eyeport with ventilation, communication and hydration options suited to GT, endurance and other enclosed race cars.
Does the Bell HP6 include HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment.
Can the Bell HP6 be connected to a forced-air cooling system?Yes. Optional top forced-air intakes can be installed on either the left or right upper ventilation ports. Bell also offers aftermarket forced-air solutions compatible with Quick Lock V10 and Maglock-style systems.
Can radio communications be installed in the HP6?Yes. The helmet includes integrated routing channels for radio communication equipment and hydration components. Bell also offers dedicated HP6 RD versions with integrated communications and hydration equipment.
Can ear cups be installed in the Bell HP6?Yes. Optional ear cups can be installed to provide additional noise insulation in loud race-car environments.
Which shield fits the Bell HP6?The Bell HP6 uses the Bell SE06 3mm shield platform. Compatible clear, tinted and specialty shields are available separately.
Does the Bell HP6 include a helmet bag?Yes. A Bell HP helmet bag is included with the helmet.
Â
Sabelt S.p.A.
Sabelt Hero Superlight TS-10 Driver Race Suit
from $3,445.00
Sabelt Hero Superlight TS-10 Driver Race Suit
Amazingly Light, Comfortable, and FIA 8856-2018 Certified
The Sabelt Hero Superlight TS-10 Driver Race Suit is a top-of-the-line professional racing suit built for drivers who want maximum protection with minimum weight. Designed with supremely low weight in mind, the Hero TS-10 combines advanced multi-layer Nomex construction, ergonomic stretch panels, and a clean, uncluttered fit for serious motorsport competition.
At only 265 g/m², the Sabelt Hero Superlight TS-10 is one of the lightest professional driver race suits in the industry. It delivers the comfort, flexibility, and safety drivers need for long stints, hot race weekends, and competitive driving environments.
Custom Made-To-Measure Sizing Available
The Sabelt Hero Superlight TS-10 is also available in bespoke made-to-measure sizing. Select the Custom Made to Measure sizing option when ordering, then contact Competition Motorsport after checkout and we will help get you set up with your custom-sized suit.
This is a great option for drivers who need a more precise fit than standard sizing can provide.
Lightweight Multi-Layer Nomex Construction
The Hero TS-10 Superlight Race Suit uses a carefully engineered three-layer fire-resistant construction. The outer layer is made from an extremely light woven flame-resistant material, while the inner Nomex layer is soft knit for comfort against the body. A honeycomb middle layer provides additional insulation without adding unnecessary bulk.
This construction gives the TS-10 the safety performance expected from a professional FIA race suit while keeping the suit lightweight, breathable, and comfortable.
Designed For Comfort In The Cockpit
The Sabelt Hero Superlight TS-10 is designed around the way drivers actually sit and move in a race car. Elastic stretch panels around the knees, elbows, and lumbar area help improve freedom of movement and ventilation. Pre-curved sleeves reduce bunching while driving, and the lower-profile collar helps create a less restrictive feel around the neck.
Even the knit wrist and ankle cuffs have been made lighter, further reducing bulk without sacrificing driver comfort.
Make It Supremely Safe And Comfortable, Then Add Lightness
For maximum lightness, the TS-10 does not use a waist belt. Its slim-fitting design eliminates unnecessary seams and excess material, helping create a cleaner fit with less weight. The understated stripe details are printed instead of sewn on to save every possible ounce.
All color options include black knit wrist and ankle cuffs, black elastic stretch panels, and fire-retardant printed yellow Sabelt logo details.
Optional Professionally-Sewn Arm Restraints
Competition Motorsport offers the option of professionally-sewn arm restraints added to the Sabelt Hero Superlight TS-10. Sewn with full Nomex thread, this option makes it much easier to keep arm restraints ready for open-wheel, open-cockpit, and other race cars where arm restraints are required.
This is a clean, convenient solution for racers who need arm restraint compliance without dealing with separate loose straps.
Sabelt Hero Superlight TS-10 Race Suit Details
FIA 8856-2018 certified
Ultra-lightweight 265 g/m² fabric construction
Multi-layer fire-resistant Nomex materials
Soft knit Nomex inner layer for comfort
Honeycomb middle layer for added insulation
Breathable ergonomic material
Incorporated stretch panels for flexibility and ventilation
Full-floating sleeves
Anti-bunching pre-curved arms
Lower-profile collar for reduced restriction
Front cellphone pocket
No waist belt for a cleaner, lighter fit
Printed stripe details to reduce weight
Black knit wrist and ankle cuffs
Black elastic stretch panels
Printed yellow Sabelt logo details
Custom made-to-measure sizing available
Optional sewn-in arm restraints available
Why Choose The Sabelt Hero Superlight TS-10?
The Sabelt Hero Superlight TS-10 Race Suit is built for drivers who want a premium FIA-approved racing suit with an emphasis on weight reduction, comfort, and movement. Its lightweight Nomex construction, stretch panel placement, and slim no-belt design make it an excellent choice for professional racing, club racing, endurance racing, and serious track competition.
Sabelt race suits are manufactured using three layers of Nomex for added safety and protection. Different Nomex weights are used across Sabelt suit models to achieve the best balance of performance, comfort, and value.
For specific questions about Sabelt race suit models, sizing, custom sizing, or sewn-in arm restraints, contact Competition Motorsport at 844-438-7244.
Frequently Asked Questions
Q: Is the Sabelt Hero Superlight TS-10 FIA certified?A: Yes. The Sabelt Hero Superlight TS-10 Driver Race Suit is FIA 8856-2018 certified for motorsport use.
Q: How light is the Sabelt Hero Superlight TS-10?A: The TS-10 uses lightweight 265 g/m² fabric construction, making it one of the lightest professional racing suits in the Sabelt lineup.
Q: Is custom sizing available?A: Yes. The Sabelt Hero Superlight TS-10 is available in bespoke made-to-measure sizing. Select the Custom Made to Measure sizing option when ordering and contact Competition Motorsport after checkout.
Q: Does the Sabelt Hero Superlight TS-10 have a waist belt?A: No. The TS-10 does not use a waist belt in order to reduce weight and keep the fit clean and uncluttered.
Q: What materials are used in the TS-10 race suit?A: The suit uses multi-layer fire-resistant Nomex materials, including a lightweight woven outer layer, soft knit Nomex inner layer, and honeycomb middle insulation layer.
Q: Can arm restraints be added to this suit?A: Yes. Competition Motorsport offers the option of professionally-sewn arm restraints using full Nomex thread.
Q: Is the TS-10 comfortable for long races?A: Yes. Stretch panels, pre-curved sleeves, breathable construction, and a lower-profile collar help improve comfort during long stints and demanding race conditions.
Q: Who is the Sabelt Hero Superlight TS-10 best for?A: It is ideal for drivers who want a lightweight FIA-approved race suit with professional protection, excellent mobility, and a clean premium fit.
