Data Loggers & Video

AiM Sports SmartyCam External Power Cable NOTE: Cables typically take 3 to 5 business days to ship. If you're not powering your AiM SmartyCam by connecting it to a Solo2 DL or an AiM Sports Dash, you'll need this external power cable in order to provide enough juice for your SmartyCam to record every session. Installation is quick and easy. Two meters (6.5 feet) in length.

Thermocouple extension cable with 712 3-pin male end to K-style female end. 5.00 ft. cable length.

AiM Sports SmartyCam to Solo/Dash Cable NOTE: Cables typically take 3 to 5 business days to ship. Have more than one vehicle with a dash or Solo 2 DL? Want to make swapping your SmartyCam between vehicles easier? Grab this extra 4M cable for your second car, route the cable as needed and leave it in place to power your SmartyCam when you drive that car. This cable takes the headache out of the process for people with more than one vehicle but only one SmartyCam. Four meters (13 feet) in length.

Stilo to Sentry Adapter Cable This cable will connect the female comms port on your Stilo GT-style helmet to your Sentry or similar Race Reciever.  Includes 3.5mm (1/8") connector (pinned for listening only) on one end and Stilo male 4C connector on the other. Made in the USA from thin, flexible, ROHS-compliant cable. 3.5mm plug for listening only *Picture below shows multi pin plug.

RAM Windshield Suction Mount Among the great advantages to the AiM Solo family of GPS lap timers is that, unlike other timers, you don't have to connect any wires to use it. That makes it ideal for use in daily-driven track-day cars (or for moving from one car to another). The RAM windshield mount lets you to mount your AiM Solo2 or Solo2 DL (and older Solo versions) to your windshield quickly and securely. Installation is as easy as pushing a lever; removal is as easy as lifting the lever. Two pivoting ball joints allow a wide range of adjustment. Two 6mm screw holes match the holes in the standard mounting plate included with your AiM Solo2 or Solo2 DL. There's no better, more convenient way to mount your AiM Solo2 / Solo2 DL.

  AiM Sports 712 to 719 Four-Pin Patch Cables NOTE: Cables typically take 3 to 5 business days to ship.   Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!   The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s  Data Logger. Available in 0.5 thru 4 Meter lengths. CONNECTS TO: MyChron3 Data Hub XG-Log Auto Dash EVO4 Logger EVO4s Logger PART NUMBERS: V02PCB05BTXG – cable length: 0.5m (1.6 ft) V02PCB10BTXG – cable length: 1 meter (3.3 ft) V02PCB15BTXG – cable length: 1.5 meter (4.9 ft) V02PCB20BTXG – cable length: 2 meters (6.6 ft) V02PCB25BTXG – cable length: 2.5 meters (8.2 ft) V02PCB30BTXG – cable length: 3 meters (9.8 ft) V02PCB35BTXG – cable length: 3.5 meters (11.5 ft) V02PCB40BTXG – cable length: 4 meters (13.1 ft) V02PCB50BTXG – cable length: 5 meters (16.4 ft)                

  AiM Sports 5-pin 712 To 712 CAN Patch Cable These cables each have a female 5-pin 712 (screw-in) connector on one end and a male 5-pin 712 connector on the other. The 5-pin 712 connector is used on all AiM dash and data logger CAN inputs. These cables will extend the reach of CAN hubs and other accessories.  Part numbers:  V02552700 – cable length: 1 Meter  V02552720 – cable length: 2 Meters  V02552730 – cable length: 3 Meters  V02552740 – cable length: 4 Meters

Garmin Direct Power Cable For use with the Garmin Catalyst Driver Performance Optimizer. It is not recommended to hardwire Garmin automotive products to a 12-volt power source unless using a specifically-designed, Garmin-made accessory with a compatible device. Hardwiring a device in any other way may cause damage. Damage incurred in this way is not covered under warranty.

Garmin Catalyst Download & AC Adapter Kit Download, power and recharge your Garmin Catalyst from any standard US wall outlet. The Garmin Catalyst adapter kit includes 1 micro cable and 1 mini cable so you can plug the appropriate cable into your device and then attach the AC outlet adapter for power or connect to a personal computer for data transfer. Garmin Catalyst Download & AC Adapter Kit Details: Manufacturer: Garmin Manufacturer Part Number: 010-11478-02

  AiM Sports 719 Extension Cables NOTE: Cables typically take 3 to 5 business days to ship   Add the appropriate AiM Sports 719 Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!   Use these extension cable to connect additional sensors to the following AiM Sports Dashes: MXG MXS MXL2 MXL Strada/Pista/Pro 05    Part numbers:   V02PCB05B – cable length: 0.5m - 1.6ft V02PCB10B – cable length: 1m - 3.3ft V02PCB15B – cable length: 1.5m - 4.9ft V02PCB20B – cable length: 2m - 6.6ft V02PCB25B – cable length: 2.5m - 8.2ft V02PCB30B – cable length: 3m - 9.8ft                

Garmin Catalyst Vehicle Power Adapter Simply and safely power your Garmin Catalyst using your vehicle's 12V power outlet with this standard socket power adapter. For use with the Garmin Catalyst Driver Performance Optimizer.

AiM Sports Temperature Sensor NOTE: Sensors typically take 3 to 5 business days to ship. Add the appropriate AiM Sports Temperature Sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!

Garmin Catalyst Dash Cam Universal Suction Cup Mount To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Camera Suction Cup Mounting Kit. It includes a Ball Joint mount with a suction cup base for quickly mounting your Garmin Catalyst Remote Camera. Garmin Catalyst Suction Cup Mounting Kit Details: Manufacturer: Garmin Manufacturer Part Number: 010-12530-25 Fits Garmin Catalyst Remote Camera: Yes We have many racers that also take their Garmin Catalyst from their track car to their DE car and the Garmin 010-12530-25 Suction Cup Mounting Kit is a track-worthy way of securing your Catalyst to your race car.