Data Loggers & Video

AiM OBD Harness for MX-Series Strada Dashes AiM Sports specialized wiring harness compatible with the AiM MXS 1.2 Strada, MXP Strada, and MXG 1.2 Strada street dashboards. Designed to seamlessly connect via a 14-pin AMP connector, this harness ensures efficient power, ground, USB, and CAN expansions. Additionally, it facilitates a direct ECU link through the OBDII diagnostic port. Ideal for production vehicles equipped with an OBDII port, the harness supports both CAN and K-Line communication standards.

AiM Sports KA 50 psi Boost/Vacuum (Absolute Pressure) Sensor This absolute pressure sensor is ideal for measuring vapor (gas) pressures, from intake boost to crankcase pressure. The 50 psi pressure range is based on perfect vacuum (i.e., from 15 psi below atmospheric pressure to 35 psi above). This sensor is marked "0-50psiA" to differentiate it from the standard 0-50 psi sensor (marked "0-50psiSG"), which does not measure vacuum. KA pressure sensors are more robust than VDO-style pressure sensors, but they should still be isolated from engine heat and vibration whenever possible. Compatible with these AiM products MyChron6 MyChron5 MXL MXL2 MXG MXS MXM EVO3 EVO4 Features 1/8" NPT male threads.

Garmin Remote Camera is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Remote Camera This is a replacement 1080P camera for the Garmin Catalyst Driver Performance Optimizer. Includes power/data cable, polarized lens cover, adhesive mount and adhesive cable clips. IN THE BOX: Remote cam Polarized lens cover Adhesive mount One 3.5-meter cable Five cable clips

AiM Sports Position Sensors Add the appropriate AiM Sports Position Sensor to your AiM vehicle data acquisition set-up to retrieve exactly the information you need to maximize your performance and take your racing to the next level! All sensors have a 30cm (12 in.) cable length Note: sensors typically take 3 to 5 business days to ship.

AiM Sports Pressure Sensor Add the appropriate AiM Sports Pressure Sensor to your AiM data acquisition set-up to retrieve exactly the information you need to maximize safety and performance, and take your racing to the next level! All sensors have a 40 cm (15.75 in) cable length. Note: sensors typically take 3 to 5 business days to ship.

Garmin Catalyst Screw Down Mounting Kit To mount the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Screw Down Mounting Kit. It includes a flat mount plate with two articulating balls and the special magnetic tablet mount.  Screw Down Mounting Kit Details Manufacturer: Garmin Manufacturer Part Number: 010-13081-01 Engineered specifically to securely mount the Garmin Catalyst We have many racers that also take their Garmin Catalyst from their street car to their trackday/race car and the Garmin Screw Down Mounting Kit is a track worthy way of securing your Catalyst to your race car.

Garmin Catalyst Cage Mount Compatible with RAM mount parts This cage mount cradle for the Garmin Catalyst driving performance optimizer provides a secure fit with quick and easy one-handed attachment and removal of the Catalyst from the cradle. This mounting kit includes a 2.5” (64mm) round base with AMPS hole pattern, locking double socket arm and diamond base adapter that connects to the cage mount cradle. The Garmin Catalyst Cage Mount includes a low-profile magnetic mount that replaces the magnetic mount that ships with the Catalyst. (The Catalyst magnetic mount does not fit in this cage mount cradle.) This mount has a ball joint size of 1.0” (25.4 mm). What's In The Box? Cage with assembly hardware Low-profile magnetic mount 2.5” round base with AMPS hole pattern Locking double socket arm Diamond base adapter that connects to the cage mount cradle Note: This is not a roll cage mount.

Garmin Catalyst Suction Mount For use with the Garmin Catalyst Driver Performance Optimizer. Attaches your Garmin Catalyst securely to your windshield or other flat surface. The Garmin Catalyst Suction Mount is built for performance-minded racers who expect more from their gear.

AiM Sports Track Day Suction Mount for SmartyCam3 & Solo2 DL The AiM Track Day Mount serves as an all-in-one solution for attaching both your AiM SmartyCam31 to your windshield. The Track Day Mount is compact, straightforward to use, and consolidates your equipment neatly, eliminating the need for two separate mounts and minimizing cable clutter. The powerful suction cup provides a secure hold on any smooth, clean surface. The robust suction cup ensures a secure grip on any smooth, clean surface. With a custom-designed contoured arm and ball mounts, the AiM SmartyCam3 faces forward, capturing the view through the windshield, while the AiM Solo2 DL faces the driver. This specialized suction-cup mount from AiM is an ideal choice for track days! Add the Trackday Kit Short Cable to your order using the dropdown above and connect your Solo2 DL and SmartyCam3 with the absolute minimum of cable clutter! 1 AiM Solo2 DL and SmartyCam3 (pictured) each sold separately.

APEX Pro Motorsports Phone Mount The APEX Pro Motorsports Phone Mount was designed in-house by APEX Pro for the demands and rigors of driving on track. The strong suction base is rated for five pounds, so holding your phone securely is no problem. The sleek anodized aluminum phone holder is adjustable and can hold the largest smart phones currently available. This mount is designed to shake less while recording video compared to other phone mounts. (Depending on your phone and the camera lens location – not centralized like an action cam – there's likely to still be some shakiness in your video.) This phone mount is perfect when paired with the Lap Timer Plus in-app purchase available on the home screen of the APEX Pro app. Phone Mount Features Securely mounts any phone from 2.6" to 3.6" (66 to 91mm) wide, including case. Designed for use with Lap Timer Plus. Tough anodized aluminum mount. Fits any size phone. (Not compatible with iPod Touch.) Great for timing, scoring, and video-recording apps on the road and at the track. Tilt and lock the hinge with 360o rotation ability. Sturdy design for smooth or rough surfaces. Perfect way to display the APEX Pro app.

AiM Sports Data Hub Extend the capabilities of your AiM MXL, MXL2, MXG, MXS dash logger or EVO4 data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each Data Hub. You can even "stack" Data Hubs, connecting up to four more hubs to each hub, multiplying the number of available connections! Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. This data hub can also be used to link your SmartyCam to any AiM dash.

AiM Patch Cable With Microphone AiM CAN patch cable with integrated external microphone to connect any supported AiM data-logger to a SmartyCam HD Rev 2.1 / SmartyCam GP HD Rev 2.1. Not compatible with SmartyCam GP HD Rev 2.2. AiM CAN Patch Cable Details Manufacturer: AiM Sports Manufacturer part no.: V02566240 Length: 4 meters (13.1 feet) Connectors: 7-pin 712 male to 5-pin 712 male

AiM Patch Cables With 3.5mm Microphone Input The original AiM SmartyCam, the SmartyCam HD Rev 2, and the SmartyCam HD GP Rev 2.1 all have an internal microphone to capture great racing sound, but it does limit your mic placement options. This specially-designed cable has a 3.5mm mono input jack to connect a second external microphone to your SmartyCam. The input from this jack is automatically mixed with the sound from the SmartyCam's internal microphone. SmartyCam Microphone Cable Fitment Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD Rev 2 or later (2015+) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD GP Rev 2.1 or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge AiM SmartyCam CAN Cable with Microphone Jack, 4M Details Manufacturer: AiM Sports Manufacturer part number: V02566300 Alternate part number: MC-552 Dash, Solo DL, Solo2 DL End: 5 Pin Male 712 SmartyCam End: 7 Pin Male 712 Microphone jack: 3.5mm female mono Cable length: 4 meters (13.1 feet) Length from 7 pin 712 to "Y" Adapter: 50mm Length from Y adapter to 5 pin 712" 4 Meter Length from Y adapter to microphone 3.5mm female jack: 900mm The 7-pin 712 connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures four meters (13..1 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the first SmartyCam HD, which has a 5-pin plug.

AiM Sports SmartyCam GP Base Mount Kit The Best Mount for Your SmartyCam Bullet Camera This strong, adjustable mount holds your AiM Sports SmartyCam bullet camera base unit securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment while keeping it safe and secure during races and track days while the V-shaped base and two different size hose clamps fit a wide range of tubing sizes, from 1" to 2" OD. The rectangular base adapter provides a stable, bolt-on base for secure mounting of the SmartyCam unit. The wide range of adjustment lets you aim the viewing screen in just about any direction. Includes V-base with ball, double clamp arm, top ball with two-bolt diamond mounting flange, rectangular mount base adapter, two hose clamps, and rubber isolator strap.

AiM SmartyCam Bullet Cam Suction Mount This adjustable mount holds your AiM SmartyCam bullet camera securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). What's In The Box? Suction cup base Lower ball clamp 60mm (2.4 inch) clamp arm Top ball with 1/4-20 mounting stud Machined collar Mounting screws