All

Performance Friction PFC Brake Pads 7700.XX.YY.44 Race-Ready, High-Performance Brake Pads Performance Friction 7700 Brake Pad Fitments: Alpine A110 Cup / GT4 – Rear Race – 25mm Aston Martin Vantage GT3 (inc endurance) – Rear (2018-23) Race – 25mm Aston Martin Vantage GT3 (inc endurance) – Rear (2024-) Race – 26mm Aston Martin Vantage GT4 – Rear (2018-) Race – 20mm Audi R8 LMS GT3 (2016-) – Rear Race – 25mm Audi R8 LMS GT2 / GT4 (2022-) – Rear Race – 25mm Bentley Continental GT3 (inc endurance) – Rear Race – 25mm BMW M4 GT3 / GT4 (2023-) – Rear Race – 25mm BMW M8 GTE – Rear Race – 25mm Chevrolet Corvette C7 GT3 – Rear Race – 25mm Citroen C3 R5 – Front & rear Rally – 16mm Citroen S1600 Rally – 16mm Citroen DS3 R3T (Gravel & Tarmac) – Front Rally – 16mm Citroen DS3 R5 (Gravel & Tarmac) – Front & Rear Rally – 16mm Ferrari 296 GT3 (2023-) Rear Race – 25mm Ferrari 355 (Challenge 1993-) – Front & Rear F355 Race – 25mm Ferrari 360/430/458 Race – 25mm Ferrari 360/430 (Challenge) Rear Race – 16mm Ferrari 458 (GT2 / GT3 Sprint & Endurance) Race – 25mm Ferrari 488 (GT3 Sprint & Endurance) Race – 25mm Ferrari 488 2017- (GTE) Race – 25mm Fiat Punto S1600 (Gravel & Tarmac) – Front & Rear Rally – 16mm Ford Fiesta R2 2016- (Tarmac) – Front Rally – 16mm Ford Fiesta S2000 (Tarmac) – Front & Rear Rally – 18mm Ford Focus WRC (Gravel) – Front & Rear Rally – 18mm Ford Mustang Boss 302S (2013-) – Front Ford Mustang GT3 (2022-) – Front Race – 25mm Ford Mustang GT3 (2024-) – Rear Race – 26mm Ginetta G50 (Ginetta supply) Race – 16mm Ginetta G55 GT4 (Endurance) – Rear Race – 16mm Ginetta G56 GT4 (Endurance) – Rear Race – 20mm Honda NSX GT3 (2022-) – Rear Race – 25mm KTM Xbow GT4 (2015-) – Rear Race – 25mm Lamborghini Gallardo GT3 / LP600 (2012) – Rear Race – 25mm Lamborghini Huracán GT3 – Rear 2017-2022 Race – 25mm Lamborghini SuperTrofeo – Rear 2017-2022 Race – 25mm Lexus RC F GT3 – Rear Race – 25mm Lotus Evora Race – 25mm McLaren 570S GT4 (2019-) – Rear Race – 20mm McLaren 650S GT3 (2015-) – Rear Race – 25mm McLaren 720S GT3 EVO – Rear Race – 26mm McLaren MP4-12C GT3 (2013-) – Rear Race – 25mm McLaren Artura GT4 (2033-) – Rear Race – 20mm Mercedes-AMG GT2 Race – 25mm Mercedes-AMG SLR / SLS (Sprint) GT3 / GT4 Race – 25mm Mercedes-AMG SLR / SLS (Endurance) GT3 / GT4 Race – 25mm NASCAR 20mm / 25mm Peugeot 208 R2 – Front Rally – 16mm Peugeot 208 Rally 4 (2020-) Front Rally – 16mm Peugeot 208 T16 R5 – Front & Rear Rally – 16mm Porsche 991 GT3 R (2019-) Rear Race – 25mm Porsche 991 RSR GTE (2017-) Rear Race – 25mm Porsche 992 GT3 Cup Rear Race – 22mm Porsche 992 GT3 R (2023-) Race – 25mm Porsche 996 GT3/RS (1998-04 inc Sprint) Rear Race – 25mm Porsche 997 GT3 Grand AM (2008-10 Sprint & Endurance) Rear Race – 20mm Porsche 997 GT2 (2007- Sprint & Endurance) Rear Race – 25mm Porsche 997 GT3 Grand AM / R / RSR (2007-) Rear Race – 25mm Renault Clio 1 Group A (Tarmac) Rally – 16mm Renault Clio S1600 (Tarmac) Rally – 16mm Riley & Scott Mark III Race – 25mm Skoda Fabia R5 Evo 2020- (Gravel & Tarmac) – Front & rear Rally – 16mm Subaru Impreza Prodrive P1 (Alcon upgrade) Rally – 16mm Suzuki Swift S1600 (Gravel & Tarmac) Rally – 15mm Toyota GT86 R3 (Gravel & Tarmac) Rally – 16mm Toyota Supra GT4 Race – 25mm VW Polo R5 (Gravel & Tarmac) – Front & Rear Rally – 16mm Performance Friction Corporation (PFC) Brake Pads 7700.XX.YY.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 7700.XX.YY.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 7700.XX.YY.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 19 Compound Performance Friction Brake Compound 19 is a specially engineered compound tailored for open-wheel and lightweight race cars, delivering precise and effortless control thanks to its slightly rising torque curve and lower coefficient of friction. This compound excels in endurance racing scenarios, making it an ideal choice for the rear axle of GT cars—particularly front-engine GTs and front-wheel-drive platforms—where balanced brake performance and long pad life are critical. Designed to withstand the rigors of 24-hour races, Compound 19 offers exceptional durability, often eliminating the need to change rear axle pads throughout the event. PFC 39 Compound Performance Friction 39 compound is PFC's newest choice for sprint and semi-endurance races in GT, TCR, NASCAR or rally tarmac/gravel. PFC 39 has a high initial bite, with the highest average torque of any PFC compound. Recommended for high downforce and severe environments. Release and modulation characteristics are its best qualities, providing excellent control to help drivers avoid lock-up. There is virtually no torque rise with temperature. A very firm, positive pedal when braking is another of its advantages. PFC 39 offers excellent wear, better than PFC 13, 15 or 333. Compound 39 is designed to handle the most severe applications. PFC 84 Compound PFC 84 is a new rear endurance compound in the PFC lineup. It shook the endurance sports car world when it took its first win upon release at the 2023 24hr of Nürburgring. This pad is heavily degressive, limiting braking power as pedal pressure increases, to work together with modern ABS systems, providing a stable, controllable rear end and minimized lockups. Its degressive curve allows this pad to not only be the perfect low wear endurance option, but also can be used in medium distance applications. Like its front counterpart (PFC 82) the PFC 84 compound has an extremely low wear rate and is gentle on discs.  PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates.

Sparco Gulf Winter Jacket The Sparco Gulf Winter Jacket merges Gulf’s iconic racing livery with advanced cold-weather tech, so you can stay toasty, dry, and seriously stylish whether you’re trackside or tackling your morning commute. Ultimate waterproof, windproof winter protection in Gulf’s signature style Sparco Gulf Winter Jacket Features Waterproof dual-density insulation that traps heat without bulk Windproof shell to block bone-chilling gusts Insulated hood with magnetic neck closure for quick adjustments Elastic cuffs seal out drafts and snow Gulf team colorway to rep your motorsport passion European fit that runs small—order one size up Sizes: XS – 3XL; made in Italy Sparco Gulf Winter Jacket FAQs: Will this jacket keep me bone-dry in a downpour? Absolutely. Its seam-sealed, waterproof shell laughs in the face of rain and snow. How can I avoid looking like a marshmallow under all that insulation? You won’t. The dual-density insulation is sleek and lightweight, so you’ll stay warm without the fluff. Is the magnetic neck closure reliable? It’s like a pit-stop pitstop—snap it shut once and you’re locked in without wrestling with zippers. Can I still rock this jacket off-track? Totally. With Gulf’s legendary livery and Italian craftsmanship, it’s built to turn heads at winter coffee runs or casual outings. What size should I grab? Because of the European cut, size up from your usual US fit for the perfect balance of warmth and mobility. Dominate winter with the Sparco Gulf Winter Jacket—where performance meets legendary racing heritage. Add to cart now and stay in pole position, no matter the forecast. Competition Motorsport sales@competitionmotorsport.com | 844-438-7244

Sparco Sprint Racing Seat The Sparco Sprint is Sparco's entry level competition seat. Perfect for weekend racers, it carefully balances safety, styling and value. The fastenings for side or bottom attachments on the tubular frame are better positioned on the shell while the holes for fifth and sixth seatbelt points provide improved safety. This seat is made from fire retardant fabric and features special non-slip fabric on the seat and shoulders. The Sparco Sprint is FIA 8855-1999 approved. Sparco Spring Sizes Standard Size: up to 34-inch waist Large Size: up to 38-inch waist Sparco Spring Racing Seat Features Additional side attachment fastenings for better positioning Includes holes for fifth and sixth seat belt points Fire retardant fabric Special non-slip fabric FIA 8855-1999 approved Dimensions

C3 Carbon Fiber Shift Paddles Enhance the beauty of your MP4-12C cockpit with C3 Carbon shift paddles. C3's autoclaved, pre-impregnated dry carbon cfiber shift paddles install easily and fit perfectly, bringing you the beauty of carbon fiber every time you drive your McLaren. C3 has matched the OEM McLaren 3K twill weave for a perfect original factory appearance. Easy installation using incredibly strong 3M VHB 5952 double-sided tape makes this a must-have for any 12C owner. All 2012-15 McLaren MP4-12C models Features Autoclaved pre-preg dry 3K carbon fiber with OEM McLaren-matched twill weave. Clear-coated with automotive urethane, hand polished to a mirror finish Precise fit without any modification Installs in minutes using 3M VHB (Very High Bond) double-sided tape Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Rear Fog Light Cover Very cool carbon fiber rear fog lamp cover for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process results in a stunning piece that installs easily and fits perfectly, adding a dash of drama to the rear of your 488. C3 matches the factory Ferrari 1x1 3K plain weave for a perfectly original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari 488. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Alpinestars Knoxville v2 Driver Race Suit The Alpinestars Knoxville v2 race suit suit has a three-layer construction with a strong fire-resistant cotton twill and Feltro padding for optimum levels of driver protection. This suit is also equipped with stretch panels on the crotch, waist and underarm for an enhanced fit, and a twill fire-resistant cotton outer shell and lining for maximum driver comfort. Other key design features of the Alpinestars Knoxville v2 include stretchable arm construction, pre-curved arms and legs, stretch panels on the crotch, waist and shoulders for driver comfort, and an optimized fit. The Alpinestars Knoxville v2 has a boot-cut leg with inner knitted elasticated cuff for maximum fire protection. Alpinestars Knoxville v2 Racing Fire Suit Details: Certified to SFI 3.2A/5 Alpinestars stretch arm construction with aramidic knit fabric ensures minimal material resistance while driving Multi-layer construction with knitted stretch panels for maximum comfort and excellent heat resistance. Aramidic knitted stretchable panels on the back, waist, and crotch enhance comfort and ease of movement. Extended, ergonomic collar with soft knitted lining Fire-resistant fabric throughout for high heat- and flame-resistance. Alpinestars-exclusive shoulder epaulette construction eases driver extraction in the event of a crash. Alpinestars Knoxville v2 Construction: Ribbed, stretchable wrist and foot cuffs for optimum driver comfort. Premium metal double slidered zipper personalized for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Belted waist ensures a precise fit. Anatomical arm, leg and torso patterned paneling optimize fit in the driving position Comfort fit design. Fabric weight 550 g/m2

Cobalt Racing Brake Pads McLaren 600LT & 720S with Girodisc Rotors (Rear) These Cobalt brake pads are designed specifically for use with the Girodisc rotor conversion kit for the McLaren 600LT and 720S. These specially-designed rear pads are available in two compounds that have been optimized to provide unsurpassed performance with either matching Cobalt McLaren front pads. Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.  

Pagid Racing Brake Pad Shape No. 8008 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 997 GT3 Cup [17 mm thick pads] 2005 - 12 X Porsche 997 All Models w/ Ceramic Brakes] 2005 - 12 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Sabelt F12 FIA 8855-2021 Side Mount Seat Brackets Laser cut from high-strength steel, these new racing seat mounting brackets are designed to work with Sabelt FIA 8855-2021 approved racing seats1 (the Sabelt GT-Spine and Sabelt GT-AM). This set includes two mounting brackets, enough to mount one seat, along with four Grade-12.9 M12 bolts to attach the brackets to your seat. Also includes four floor-reinforcing plates (these require four Grade-12.9 M10 bolts for mounting the brackets to your chassis, not included). Sabelt F12 Seat Mount Bracket Details Manufacturer: Sabelt Manufacturer part no.: RFST0071 Homologation: FIA 8855-2021 Material: steel Finish: powder coated black Includes seat mounting bolts & floor reinforcement plates 1 Note: these brackets are designed for use with Sabelt FIA 8855-2021 homologated seats only. They may not fit other brands of FIA 8855-2021 seats. They will not fit seats, regardless of brand, homologated to the FIA 8855-1999 standard.

Performance Friction PFC Brake Pads 5000.331.15.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 5000.331.15.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 5000.331.15.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 5000.331.15.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 331 Compound PFC 331 is the next generation of PFC endurance material, giving you improved control with ABS while being gentle on rotors. The 331 Carbon Metallic compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release while continuing to offer exceptional control and feel. It boasts a low wear rate and exceptional disc conditioning. Fits the Following Cars (Front Axle): Make Model Year Notes Toyota Corolla GR 2023 - 2025 Front Toyota Yaris GR Sport with red calipers only 2020 - 2025 Front

Pagid Racing Brake Pad Shape No. 1908 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 993 GT2 & RSR [disc ø 380 mm] 1995 - 97 X Porsche 996 GT3 R & GT3 RS [race cars] 2000 - 05 X Fits the Following Calipers: Make Type Remarks Shape No. Alcon TA 4. CAR84 [4484] 18mm,22mm,24mm 1842, 1908, 8090 Brembo Big Red [type 132A family] 18mm,22mm,24mm 1842, 1908, 8090 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Girodisc GP-Series Rear Brake Pads 1469 The Girodisc GP35 compound offers a versatile race-ready pad engineered for drivers who demand confident, repeatable braking on the track. Designed for the rear axle of BMW G8X chassis vehicles, these pads deliver smooth modulation, strong heat stability, and predictable release characteristics under heavy braking conditions. They work seamlessly with both factory ABS and motorsport ABS systems, making them a proven choice for advanced drivers and competitive track use. Fits the Following Vehicles: Make Model Years Front Rear BMW G80 M3 2021–Present X BMW G82 M4 2021–Present X BMW G83 M4 Convertible 2021–Present X BMW G87 M2 2023–Present X Features • Designed for dedicated track use with stable high-temperature performance• Smooth and linear torque curve for excellent modulation and release• Works effectively with performance street tires, R-compound tires, and race slicks• Consistent pedal feel during extended lapping sessions• Precision cut to pad shape 1469 for direct rear fitment• Sold/priced per axle set Specifications • Pad Shape: 1469• Position: Rear• Compound: GP35 race formulation• Rotor Type: Iron rotors only• Compatible Systems: OEM BMW G8X rear iron rotor braking systems• Sold/priced as one pair (one axle set) Girodisc GP-Series Pad FAQs Can these pads be used with carbon-ceramic rotors? No. The GP35 compound is designed exclusively for iron rotors and is not compatible with CCB systems. Are these pads suitable for street use? They can be driven on the street but are optimized for track conditions. Some noise or dust is expected during low-speed or cold operation. Do these work with factory ABS? Yes. The GP35 compound is designed to work cleanly with both OEM ABS and motorsport ABS systems. What type of track driving are these intended for? GP35 pads are a balanced compound suitable for sprint races, advanced HPDE, and general track competition where consistent braking and easy modulation are critical.

Girodisc GP-Series Pads GP10 No. 1718  The Girodisc GP-Series 1718 rear pads deliver high-performance braking for vehicles equipped with standard rear iron rotors. Available in GP10 Street, GP35 All-Around Race, and GP40 Sprint Race compounds, these pads offer options for daily driving, aggressive track use, or full competition performance. Designed for confident modulation, excellent heat stability, and long service life, the 1718 pad shape is used on several popular performance platforms. Fits the Following Vehicles: Make Model Years Front Rear Chevrolet Camaro SS (Iron Rotor Models) 2016–2023 X Chevrolet Corvette Stingray / Grand Sport / Z06 (Iron Rotor Models) 2014–2019 X Ford Mustang GT (Performance Package) 2016–2020 X Ford Mustang Shelby GT350 / GT350R 2015–2020 X Cadillac ATS-V 2016–2019 X Available Compounds GP10 Street / Track-Day CompoundA semi-metallic pad engineered for spirited street use and occasional track days. Low dust, quiet operation, strong cold bite, and excellent heat stability make it a perfect “do-everything” rear pad for daily-driven performance vehicles. GP35 All-Around Race CompoundA versatile motorsport pad offering a balance of initial bite, modulation, and endurance. Works seamlessly with both OEM ABS and motorsport-grade ABS. Ideal for aggressive track driving, time trials, and mixed-use competition. GP40 Sprint Race CompoundA sprint-focused compound delivering strong bite and repeatable performance at elevated temperatures. Designed for high-performance track environments where consistent braking and rotor friendliness are critical. Features • Pad shape 1718 for performance rear brake systems• Compatible with iron rotors only• Three compounds to match your driving needs• Excellent modulation and release characteristics• Designed for modern ABS-equipped performance cars• Sold/priced per axle set Specifications • Pad Shape: 1718• Position: Rear• Compounds: GP10 / GP35 / GP40• Rotor Compatibility: Iron rotors only• Sold/priced per pair of pads Girodisc GP-Series Pad FAQs Do these pads fit carbon-ceramic (PCCB/CCM) brakes?No. Pad shape 1718 is designed for iron rotor setups only. Which compound is best for daily driving?GP10 is optimal for street use with the lowest dust and noise. Which compound should I choose for heavy track days?GP35 for balanced race use, GP40 for sprint racing and high heat conditions. Do these pads require bedding?Yes. Proper bedding is essential for optimal bite, even pad transfer, and rotor longevity.

Girodisc GP-Series Rear Brake Pads 6027  Subaru WRX STI ('18+) Girodisc GP-Series rear pads for the 2018+ Subaru WRX STI deliver race-bred braking performance with three compound options to match your driving style. All variants use the GP 6027 pad shape and are designed exclusively for Girodisc Iron Conversion rear rotor systems, providing consistent modulation, excellent heat control, and dependable pedal feel. Fits the Following Vehicles: Make Model Years Front Rear Subaru WRX STI (Girodisc Iron Conversion) 2018–2021 X Available Compounds GP10 Street CompoundIdeal for daily driving and spirited canyon or light track use. Low dust, excellent cold bite, smooth modulation, and stable friction without excessive rotor wear. GP35 Race CompoundA versatile track-focused pad with stronger initial bite, higher temperature capacity, and excellent modulation—great for aggressive HPDE or sprint racing. GP40 Sprint Race CompoundHigh-friction sprint compound engineered for short, intense sessions. Delivers immediate bite, firm pedal feel, and reliable release characteristics under high heat. Features • Direct replacements for Girodisc pad shape 6027• Stable friction across a wide temperature range• Excellent heat control and pedal modulation• Designed exclusively for Girodisc Iron Conversion rear systems• Sold/priced per axle set Specifications • Pad Shape: 6027• Position: Rear• Compounds Available: GP10, GP35, GP40• Vehicle Fitment: Subaru WRX STI (2018–2021) with Girodisc rear setup• Compatibility: Girodisc Iron Conversion systems only• Contents: One axle set (pair of pads) Girodisc GP-Series Pad FAQs Do these pads fit the OEM Brembo rear calipers and rotors? No. These pads are sized for Girodisc Iron Conversion rear systems and are not intended for factory rotors. Which compound should I pick for mostly street use? GP10. It offers low dust, quiet operation, and strong cold performance with predictable pedal feel. Can I run GP35 or GP40 on the street? You can, but expect more noise/dust and reduced cold bite compared to GP10—these compounds are optimized for higher track temperatures. Do these pads require bedding? Yes. Proper bedding is essential to establish an even transfer layer and achieve maximum braking performance and consistency.