all

Girodisc Porsche 986, 987 Rear Rotors Give your Boxster or Cayman sharper, more consistent braking with Girodisc’s two-piece rear rotors. Designed as a direct OEM replacement, these lightweight rotors deliver smoother pedal feel, improved heat dissipation, and reduced unsprung mass—all while maintaining factory balance and compatibility with stock calipers. Vehicle Fitment Porsche 986 Boxster / Boxster S (1997–2004)Porsche 987 Boxster / Boxster S (2005–2012)Porsche 987 Cayman / Cayman S (2006–2012)Direct OEM replacement – no modifications required Engineered for Mid-Engine Performance The Girodisc system replaces the factory cast rotor with a fully rebuildable two-piece floating design. Each rotor features a CNC-machined 6061-T6 aluminum hat and Girodisc’s proprietary cast-iron friction ring, both made in the USA. The internal curved vane layout acts as a centrifugal air pump, maintaining even cooling and consistent friction under extended use. The result is enhanced control and reduced fade for street or track driving. Features • Direct OEM replacement – bolts to factory hubs• 6061-T6 billet aluminum hats, machined and anodized in the USA• Proprietary cast-iron friction rings, poured and machined in-house• Floating mount system with cadmium-plated steel drive pins• Anti-noise spring washers eliminate rattle and manage thermal expansion• Curved internal vane design for superior cooling efficiency• Reduces unsprung weight for quicker suspension response• Maintains OEM brake bias and ABS function• Fully rebuildable – replace friction rings as needed• Sold/priced per pair Girodisc A2-031 Rear Rotor FAQs: Are these rotors a direct fit for my Boxster or Cayman? Yes. They’re designed to bolt directly onto 986 and 987 chassis cars using the original calipers and hardware—no adapters required. How do they improve braking over stock? Girodisc rotors are lighter and better cooled, resulting in faster response, improved heat control, and greater fade resistance during hard driving. Are these rotors suitable for track use? Definitely. The floating design and proprietary iron composition deliver consistent performance even under repeated high-load braking conditions. Can I use my existing brake pads? Yes. They’re fully compatible with OEM or aftermarket pad compounds, giving you flexibility for street or performance setups. Upgrade your Boxster or Cayman with Girodisc rear rotors—precision-engineered to deliver better cooling, reduced weight, and true Porsche braking feel.

A1-306 Girodisc Porsche 992 GT3, GT3 RS Front Rotors (36mm)   These Girodisc A1-306 2-piece front rotors are a direct bolt-on for Porsche 992 GT3 and 992 GT3 RS with 36 mm-thick steel front rotors (not for PCCB). Floating construction reduces unsprung and rotational mass while preserving OE calipers, ABS, and brake bias. Vehicle Fitment Porsche 911 (992) GT3 – Front, 36 mm steel rotors (non-PCCB) Porsche 911 (992) GT3 RS – Front, 36 mm steel rotors (non-PCCB) Not compatible with PCCB (carbon-ceramic) brake packages. High-Carbon Rings & Curved-Vane Cooling The rings are machined from Girodisc’s proprietary high-carbon iron and use curved internal vanes that act as a centrifugal pump to pull cooling air through the rotor. Spring-preloaded floating hardware allows thermal expansion while minimizing noise for street use. Features Direct OE replacement; no modifications required 2-piece floating design reduces unsprung/rotational mass High-carbon iron rings; reusable 6061-T6 aluminum hats Cadmium-plated high-strength drive pins, clips, Belleville washers Manufactured and assembled in Bellingham, WA Sold/priced per pair A1-306 FAQs Does this fit PCCB cars? No. This listing is for 36 mm steel-rotor cars; PCCB uses different discs. Do I need new calipers or brackets? No — the rotors bolt to OE hubs and work with the factory calipers. Are replacement rings available? Contact us for availability; rings are sold in pairs for Girodisc hats only.

Girodisc Front Rotors for Porsche Carrera, 981 / 718 – Includes Spacers & Bolts Upgrade the front braking system on your Porsche Carrera, 981, or 718 with Girodisc 2-piece front rotors. This system is a direct replacement for the OE discs, with the addition of the included caliper spacers and bolts. Rotor diameter increases to 350 mm from the factory 330 mm, delivering improved braking torque and greater thermal capacity for consistent performance. A1-153 Vehicle fitment • Porsche 911 Carrera (non-Turbo) with standard 330 mm front brakes (front axle).• Porsche 981 / 718 Cayman & Boxster with standard 330 mm front brakes (front axle).• Supplied spacers and bolts adapt OEM calipers to the larger 350 mm Girodisc rotors. Note: Always verify wheel and caliper clearance when upsizing to 350 mm rotors. Lightweight, high-performance rotor engineering The rotor hats are precision-machined from U.S.-sourced 6061-T6 aircraft-spec aluminum. The iron rotor rings are cast in the USA using Girodisc’s proprietary high-carbon iron alloy, then machined in-house for exacting tolerances. A curved vane design actively pumps cooling air through the disc under braking, improving fade resistance during demanding use. A1-153 Features • Direct replacement upgrade with supplied caliper spacers and bolts• 350 mm diameter vs. OEM 330 mm for greater braking force• Proprietary high-carbon cast iron rings, cast and machined in the USA• 6061-T6 aluminum hats, black anodized• 10 high-strength alloy steel drive pins, cadmium plated for corrosion resistance• Floating rotor system with anti-noise spring washers• Self-centering rotor float improves pad alignment under heat• Replaceable rings allow lower long-term operating cost• Sold/priced in pairs Related Products Girodisc  D1-153 Front Replacement Rings Girodisc A2-153 Rear Rotors Girodisc D2-035 Rear Replacement Rings Service guidance • When the iron rings reach minimum thickness or show fatigue cracking, replace only the rings while reusing the aluminum hats and hardware.• Replacement D1-135 rings are available separately for cost-effective service. The Girodisc A1-135 front rotor system transforms your braking with increased diameter, improved cooling, and precision floating construction—all while allowing economical service down the road.

Audi B9 RS4 / RS5 Front Rotors Unleash the full braking potential of your Audi RS4 or RS5 with Girodisc’s lightweight 2-piece floating front rotors. These are a true bolt-on replacement for the factory discs—no modifications required. By upgrading to Girodisc, you maintain your OEM brake balance and ABS functionality while gaining improved cooling, reduced fade, and a noticeably sharper pedal feel. Engineered for Precision and Performance Each Girodisc rotor is designed and manufactured in the USA from premium materials. The hat is CNC-machined from 6061-T6 aircraft-grade aluminum for strength and reduced weight. The iron rotor rings are cast from Girodisc’s proprietary high-carbon alloy, developed to withstand extreme temperatures and ensure consistent performance under repeated hard stops. The internal curved vane design acts as a centrifugal air pump, pulling cooling air through the disc to keep brake temperatures under control during spirited or track driving. Girodisc A1-216 Vehicle Fitment Audi RS4 (B9, 2018+) Audi RS5 (B9, Coupe & Sportback, 2018+) Features Direct OEM Fit: Bolts directly to factory calipers and hubs with no adapters or modifications needed. Lightweight Two-Piece Design: Reduces rotational and unsprung mass for faster suspension response and improved cornering. Curved Vane Cooling: Directional vanes actively pump air through the disc to improve cooling efficiency and prevent fade. Floating Mount System: Twelve high-strength steel drive pins with anti-noise spring washers allow thermal expansion without rattle or vibration. Serviceable Construction: The aluminum hats are reusable—only replace the cast-iron rings when worn. Made in the USA: Fully machined and assembled domestically with tight quality control. FAQs –Girodisc A1-216 Audi B9 RS4 / RS5 Front Rotors Are these rotors compatible with OEM calipers? Yes, they fit the factory RS-series Brembo calipers directly—no adjustments required. Will these improve braking feel? Absolutely. You’ll notice a more consistent, responsive pedal with improved modulation under high heat. Are Girodisc rotors quieter than stock? Yes—the floating hardware includes anti-noise spring washers that eliminate the rattling common to other two-piece designs. Can these rotors handle track use? Definitely. They’re designed for sustained high temperatures, making them ideal for both spirited road use and heavy circuit work. Give your Audi RS4 or RS5 the braking confidence it deserves with Girodisc’s precision-built floating front rotors. Engineered to deliver unmatched cooling, control, and reliability—whether you’re charging mountain roads or braking deep into a corner at the track.

D1-179 Girodisc Audi Front Rings Restore peak braking precision in your Audi RS or S model with Girodisc D1-179 370x34mm front replacement rings. These precision-machined components bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit. Constructed from high-carbon cast iron, they offer improved heat management, reduced unsprung weight, and fade-free performance during aggressive street or track use. Vehicle Fitment Compatible with:• Audi RS5 (B8/B8.5, 2013–2015)• Audi RS4 (B8, 2013–2015)• Audi S6 / S7 (C7, 2013–2018)• Audi A6 / A7 3.0T with Performance Brake PackageNote: Designed exclusively for Girodisc 370x34mm two-piece front rotor systems. Not compatible with OEM one-piece or carbon-ceramic rotors. Features • Sold as a left/right pair with full floating hardware kit• Direct replacements for Girodisc 370x34mm two-piece front rotors• Cast from proprietary high-carbon iron alloy for superior thermal stability• Directional curved vanes channel air for maximum cooling• Maintains OEM brake bias and ABS/ESC function• Dynamically balanced for smooth, vibration-free operation• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 370 mm• Thickness: 34 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and new hardware kit• Sold/priced per pair Girodisc D1-179 Audi 370x34mm Front Ring FAQs Will these fit OEM Audi rotor hats? No. The D1-179 rings are specifically designed to mount to Girodisc aluminum hats only, not factory or carbon-ceramic hats. What pad compounds work best with these rotors? They perform excellently with Ferodo DS2500, Pagid RS29, and Hawk HP+ pads, depending on your driving style and heat demands. Do they require a specific bedding process? Yes. Perform 8–10 medium stops from 60–10 mph to evenly transfer pad material, then cool completely before heavy use. Are these rotors directional? Yes. Each rotor is marked for left and right sides — follow the arrow cast into the hat mounting area to ensure proper airflow and cooling direction. Upgrade your Audi’s braking system with Girodisc D1-179 370x34mm front replacement rings — precision-balanced for endurance, consistency, and maximum confidence on the road or at the track.

McLaren Front Rotors (Girodisc A1-159) The Girodisc 394mm Front Rotor Conversion for McLaren models provides a lightweight, high-performance alternative to the OEM carbon-ceramic rotors. Designed as a direct bolt-on replacement, these two-piece iron rotors retain full compatibility with the factory calipers while improving heat management, serviceability, and overall braking performance. By switching to iron rotors, drivers benefit from enhanced thermal durability and reduced maintenance costs without compromising braking balance or ABS functionality. Vehicle Fitment This Girodisc 394mm front rotor set fits the following McLaren models equipped with OEM carbon-ceramic front rotors: McLaren 540C McLaren 570S / 570GT McLaren 600LT McLaren 650S McLaren 675LT McLaren MP4-12C McLaren 720S (with 394mm front rotors) Direct fit for factory six-piston front calipers. No modifications required. Pad Compatibility To optimize performance and reduce unnecessary weight, these rotors are designed for pads with an annulus (swept area) of 66mm or less. The correct pad shape is the common FMSI D1405, also used on vehicles such as the Nissan GT-R, Cadillac CTS-V, and many AMG Mercedes models with six-piston calipers. Girodisc offers several pad compounds in this shape; contact us for recommendations. Performance and Design The rotor assembly combines a 6061-T6 aircraft-grade aluminum hat with a proprietary cast iron friction ring machined entirely in-house at Girodisc. The curved vane design acts as a centrifugal pump, pulling air through the disc to improve cooling efficiency under sustained high temperatures. The result is consistent braking performance, reduced fade, and improved pedal feel in both track and street conditions. Features - Direct replacement for OEM 394mm carbon-ceramic rotors; no modifications required. - Two-piece floating design reduces unsprung and rotating mass for sharper response. - 6061-T6 aluminum hat mated to a proprietary cast iron rotor ring for strength and thermal control. - Curved vane internal design promotes efficient airflow and heat dissipation. - Floating mount system with 12 high-strength alloy steel drive pins for controlled axial and radial float. - Anti-noise spring washers eliminate rattle during street use while maintaining float under race conditions. - Cadmium-plated hardware ensures corrosion resistance and longevity. - Fully machined and assembled in the USA to Girodisc motorsport-grade specifications. Specifications Rotor Diameter: 394mmRotor Type: Two-piece floatingPad Shape: FMSI D1405 (≤66mm annulus)Material: Proprietary cast iron with 6061-T6 aluminum hatHardware: 12 alloy steel drive pins with anti-noise spring washersFitment: McLaren models with 394mm OEM carbon-ceramic rotorsSold as: Pair (left and right front rotors) FAQs: McLaren 394mm Front Rotors (Girodisc) Why do I need to change the pad shape? To maintain optimal weight and heat capacity, the Girodisc rotors use a smaller 66mm swept area. The FMSI D1405 pad shape provides the correct fit and performance balance. Can I reuse my OEM pads? No. The OEM pads are designed for the full annulus of the carbon-ceramic rotors and are too large for this conversion. Are these rotors noisy? No. Anti-noise spring washers prevent rattle during normal driving while allowing full float under heat. What are the main benefits over OEM carbon-ceramic rotors? Improved serviceability, enhanced thermal consistency, and a major cost reduction for replacement and maintenance. Can the rotors be serviced? Yes. When the cast iron rings wear out, they can be replaced individually, allowing the aluminum hats and hardware to be reused. Ordering Information Sold and priced per pair. Includes left and right Girodisc 394mm front iron rotors for McLaren models equipped with OEM carbon-ceramic brakes. Requires FMSI D1405 pad shape for installation.

 Girodisc Porsche 410mm Front Rotors The Girodisc 410mm Front Rotors for Porsche 991 and 992 models deliver exceptional braking performance and longevity without the downsides of heavy carbon ceramics. Designed as a direct replacement for the OE discs, these rotors maintain factory brake bias and ABS efficiency while allowing a broader range of high-performance pad choices. Lightweight, Track-Proven Replacement Rotors This system is a direct replacement for the factory iron rotors, provided you use the same pad shape found on 991/992 GT3 and Turbo models equipped with iron brakes. The smaller annulus (pad swept height) versus PCCB pads reduces weight and expands your pad selection options, while still delivering exceptional heat management under demanding track conditions. A1-156 Girodisc 2pc 410mm Front Brake Rotor Features The central hat section is machined from U.S.-sourced 6061-T6 aircraft-grade aluminum for maximum strength and minimal unsprung mass. The rotor rings are made from Girodisc’s proprietary cast iron, poured and fully machined in-house in the USA. Each rotor features a curved vane design that acts as a centrifugal pump to move cooling air efficiently through the disc, reducing heat fade and extending pad life. The floating mount system uses 12 high-strength alloy steel drive pins, cadmium plated for corrosion resistance and secured with class 12.9 cap screws and hardened washers. Anti-noise spring washers allow the rotors to expand under heat while eliminating the rattle typically associated with floating systems. This floating design also lets the rotor self-center between the pads for consistent pedal feel and reduced drag. Once the Girodisc system is installed, future rotor service is simple—only the iron rotor rings need replacement when worn, keeping your long-term costs and downtime low. A1-156 Girodisc 2pc 410mm Front Brake Rotors FAQs: Do these rotors fit PCCB-equipped cars? Yes, but you must use the smaller pad shape from 991/992 GT3 or Turbo models originally fitted with iron brakes. The PCCB pads are too large for these discs. Will these rotors affect my ABS or brake bias? No, Girodisc designs their rotors to maintain the factory brake balance and ABS performance of your Porsche. How much lighter are these than OEM rotors? The weight varies by application, but Girodisc rotors typically save several pounds per corner, reducing rotational and unsprung weight for sharper handling and acceleration. Do I need special hardware to install them? No modifications are needed. The Girodisc rotors bolt directly to your car and work with your OEM calipers and mounting hardware. Can I reuse the aluminum hats when replacing rotors? Yes — the system is designed so that when the iron rings reach end of life, you can simply install new rings onto the existing hats. Upgrade your Porsche’s stopping power and feel with the precision-engineered Girodisc 410mm Front Rotors — built for drivers who demand race-level performance on both street and track.

D1-104 Girodisc Honda S2000 Front Rings Restore your Honda S2000’s braking precision with Girodisc D1-104 328mm front replacement rings. These precision-engineered components bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit. Each rotor ring is machined from Girodisc’s proprietary high-carbon cast iron, delivering outstanding heat capacity, improved modulation, and fade-free braking for both street driving and track use. Vehicle Fitment Compatible with:• Honda S2000 AP1 (2000–2003)• Honda S2000 AP2 (2004–2009)Note: Designed exclusively for Girodisc 328mm two-piece front rotor systems. Not compatible with OEM one-piece rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 328mm two-piece front rotors• CNC-machined from high-carbon cast iron for maximum heat resistance and durability• Directional curved vanes improve cooling and airflow under heavy braking• Maintains OEM brake bias, ABS, and stability calibration• Balanced for smooth, vibration-free braking• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 328 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and new hardware kit• Sold/priced per pair Girodisc D1-104 Honda S2000 Front Ring FAQs Do these fit OEM Honda S2000 rotors? No. These are replacement rings for Girodisc two-piece systems and will not fit factory one-piece rotors or hats. What pad compounds work best with these rotors? For daily and spirited driving, Ferodo DS2500 or Hawk HPS 5.0 are ideal. For track events, Pagid RS29 or Project Mu Club Racer pads deliver excellent heat control and bite. Are these rotors directional? Yes. Each rotor is labeled for left and right installation to ensure proper airflow through the curved vane structure for optimal cooling. What torque should I use on the floating hardware? Torque each bolt to 12 ft-lbs (16 Nm) with blue Loctite. Recheck torque after the first heat cycle for proper fitment and safety. Upgrade your Honda S2000’s braking system with Girodisc D1-104 328mm front replacement rings — engineered for lightweight performance, superior cooling, and track-ready durability.

Audi, Lamborghini 380mm Front Rotors, incl. spacers & bolts Step up your braking performance with Girodisc two-piece floating front rotors for Audi and Lamborghini models equipped with 365mm factory rotors. This 380mm upgrade increases braking force and cooling capacity while maintaining factory ABS and bias. The included caliper spacers and hardware make installation straightforward, transforming your car’s stopping power without the need for a full big brake kit. Precision Engineering for Exotic Performance Each Girodisc rotor is manufactured in the USA from proprietary high-carbon cast iron, mated to a 6061-T6 aluminum hat for exceptional strength and reduced weight. The curved vane internal design acts like a centrifugal pump, pulling air through the rotor to dissipate heat under high-stress driving. The fully floating design prevents warping and ensures consistent, quiet operation through anti-noise spring washers that allow the rotor to expand naturally under heat. Vehicle Fitment • Audi R8 (Gen 1, 2007–2015)• Audi RS5 (B8, 2013–2015)• Lamborghini Gallardo (All models with 365mm front rotors) Features • Direct-fit upgrade with included caliper spacers and bolts• Larger 380mm diameter for increased braking torque and cooling• Lightweight two-piece floating rotor design• U.S.-sourced 6061-T6 aluminum hats• Proprietary cast iron rotor rings with curved internal vanes• Floating drive pin system with anti-noise spring washers• Improved heat management and fade resistance• Sold/priced per pair Audi & Lamborghini Front Rotor FAQs: Do these rotors require modification? No, they are a direct-fit upgrade with the included spacers and hardware. Will they fit factory calipers? Yes, these rotors work with OEM calipers using the supplied caliper spacers. What are the benefits of the larger 380mm size? The increased diameter provides greater braking leverage, reduced fade, and better heat dissipation during repeated stops. Can I replace just the rings later? Yes, Girodisc offers replacement rings to reuse your existing aluminum hats, saving cost over time. Upgrade your Audi or Lamborghini with Girodisc’s high-performance 380mm front rotors—precision-built to deliver the braking power and control your supercar deserves.

Girodisc Mitsubishi Evo 6–9 Front Rotors The Girodisc system is a direct replacement for the factory rotors on Mitsubishi Evolution 6, 7, 8, and 9 models. No modifications are required—the discs bolt directly to the car and work with the OEM calipers perfectly. By upgrading to lightweight, high-performance rotors rather than a full big brake kit, your factory brake bias and ABS efficiency remain intact. The Girodisc front rotors weigh approximately 18.2 lbs each compared to the 22 lbs stock rotors, reducing rotational and unsprung weight for sharper suspension response and quicker acceleration. High-Performance Construction The hat section of each rotor is precision-machined from U.S.-sourced 6061-T6 aircraft-grade aluminum for exceptional strength and reduced weight. The rotor rings are cast from Girodisc’s proprietary high-carbon iron alloy, poured and machined entirely in-house in the USA. The curved vane internal design functions like a centrifugal pump, forcing cooling air through the rotor to maximize thermal efficiency during demanding track sessions. Girodisc A1-008 Features Direct-fit replacement—no modifications required Lightweight two-piece floating rotor design Reduces unsprung and rotational mass for faster suspension response 6061-T6 aluminum hat with proprietary high-carbon iron rotor rings Curved vane internal design improves cooling and heat dissipation Floating mount system prevents warping and pad knockback Cadmium-plated drive pins resist corrosion and extend service life Anti-noise spring washers eliminate rattles while maintaining float Fully rebuildable—replace rings as needed and reuse the hats Vehicle Fitment Mitsubishi Lancer Evolution VI (1999–2001) Mitsubishi Lancer Evolution VII (2001–2003) Mitsubishi Lancer Evolution VIII (2003–2005) Mitsubishi Lancer Evolution IX (2005–2007) Technical Specifications Part Number: A1-008 Position: Front Weight: 18.2 lbs (each) Rotor Type: Two-piece floating Hat Material: 6061-T6 aluminum (anodized) Disc Material: Girodisc proprietary high-carbon cast iron Vane Design: Curved, directional Drive Pins: 10 high-strength alloy steel, cadmium-plated Hardware: Class 12.9 cap screws with hardened washers Sold/Price: Per pair FAQs for Girodisc A1-008 Do these rotors fit directly? Yes. The Girodisc system is a bolt-on replacement for the OEM rotors—no additional modifications or adapters required. Will they work with OEM calipers and pads? Absolutely. They are designed to be fully compatible with factory brake components. Can I replace just the rings? Yes. Girodisc rotors are fully rebuildable—simply replace the iron rings when worn while reusing the aluminum hats and hardware. Are these suitable for track use? Yes. The Girodisc Evo 6–9 rotors are engineered for demanding motorsport applications, offering superior cooling and resistance to warping under heat. Upgrade your Mitsubishi Evo 6–9 with Girodisc’s precision-engineered floating rotors—built for exceptional cooling, reduced mass, and maximum braking performance on street or track.

Pagid Racing Brake Pad Shape 8006 Pagid 8006 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 997 all models ceramic brakes 05 - 12 X Porsche 997 GT2 & GT2 RS 07 - 12 X Porsche 997 GT3 07 - 11 X Porsche 997 GT3 Cup [19 mm thick pads] 05 - 12 X Porsche 997 GT3 RS 07 - 12 X Porsche 997 GT3 Rally 05 - 12 X Porsche 997 Turbo 06 - 12 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Applications include GT cars, touring cars and prototype endurance racing. Due to excellent modulation characteristics, RSL 2 is often also used in sprint races. Pagid RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape 8276 Pagid 8276 Brake Pad Fitment Guide Make Model Year Front Rear BMW 3 Series (G20/G21): M340i, M340d, 320i-330i M-Technik, 330e M-Technik, 316d-330d M-Technik 2019 +     X BMW Z4 Roadster (G29): M40i sDrive, 20i-30i M-Technik 2019 +     X Toyota Supra A90 2020 +     X Toyota GR Supra 2020 +     X BMW 4 Series Coupe (G22./G23, G82): M440i, M440d, 420i-430i M-Technik, 420d-430d M-Technik 2020 +     X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

PFC 0636.XX.13.44 Rear Brake Pads Fits Mazda Miata (1994 - 2005), Front PFC 97 Compound: A favorite since its debut, Performance Friction 97 Compound Racing Braking Pads continue to impress, winning numerous races in CART, ALMS, Grand Am, ASA, and Club Races everywhere. The 97-Compound has less initial bite and torque then the 01, while offering great modulation, a very flat torque curve, and excellent release characteristics. A naturally low-wearing pad, the 97 compound is popular in the endurance circuits and amongst Club Racers and Track-Day enthusiasts. PFC 11 Compound: Based on the outgoing 01-compound, Performance Friction's 11-compound takes the same great high-bite and torque but with even better rotor and pad wear characteristics and improved bite, modulation, and release. Exhibiting a very high initial bite and torque, very little temperature induced torque rise follows. Less torque scatter exists for improved modulation with excellent release, helping to eliminate wheel lock at the end of a stop.

Race Technologies P1103 / 2421 Brake Pad Race Technologies P1103 / 2421 Brake Pad Fitment Guide (FMSI D738) Make Model Build (Year) Front Rear Porsche 996 Carrera 3.4 & 3.6 1997 - 2005 X Porsche 718 Boxster 2.0  2016+ X Porsche 718 Boxster S 2.5 2016+ X Porsche 986 Boxster 1996 - 2005 X Porsche 987 Boxster 2005 - 12 X Porsche 981 Boxster 2.7 2012+ X Porsche 981 Boxster GTS 3.4 2014+ X Porsche 986 Boxster S 1999 - 2005 X Porsche 987 Boxster S 2005 - 12 X Porsche 981 Boxster S 3.4 2012+ X Porsche Cayenne Turbo [18" wheels] 2002 - 10 X Porsche 718 Cayman 2.0 2016+ X Porsche 718 Cayman S 2.5 2016+ X Porsche 987 Cayman 2009 - 12 X Porsche 981 Cayman 2.7 2013+ X Porsche 981 Cayman GTS 3.4 2014+ X Porsche 987 Cayman R (non-ceramic) 2010 - 12 X Porsche 987 Cayman S 2006 - 12 X Porsche 987 Cayman S 3.4 2013+ X   Race Technologies P1103 / 2421 Brake Pads The Race Technologies 2421 brake pad is a compact, high-performance front pad shape engineered for demanding street, HPDE, track day, club racing, and motorsport applications. Featuring a 112 mm overall width, 74 mm overall height, D48 profile, and 15.5 mm thickness, the 2421 delivers precise braking performance for performance vehicles equipped with compatible fixed-caliper brake systems. Competition Motorsport offers the Race Technologies 2421 brake pad in RE10 and TS20 compounds, allowing drivers to select the friction material best suited to their driving style, vehicle setup, brake temperatures, and intended use. Race Technologies 2421 Brake Pad Specifications Pad Shape: 2421 / P1103.15 Axle Position: Rear Overall Width: 112 mm Overall Height: 74 mm Pad Profile: D48 Pad Thickness: 15.5 mm Available Compounds: RE10 and TS20 Application: High-performance street, HPDE, track day, and motorsport use depending on compound The distinctive D48 profile features a centered retaining tab with a rectangular opening and a broad friction surface that provides excellent braking stability and pedal feel. Always compare the 2421 pad outline and dimensions with your existing brake pads or caliper specifications before ordering. Race Technologies 2421 Brake Pad Compound Comparison RE10 Racing Compound Race Technologies RE10 is a competition-focused friction material engineered for consistent braking performance under sustained high temperatures. Designed for track days, sprint racing, endurance racing, and club competition, RE10 provides strong initial bite, excellent modulation, and dependable performance throughout extended sessions. As a dedicated racing compound, RE10 may generate increased brake dust and noise during normal street driving and performs best within its intended operating temperature range. TS20 Street and Track Compound Race Technologies TS20 is designed for drivers who regularly enjoy spirited street driving, HPDE events, and occasional track days. TS20 offers excellent cold response, predictable modulation, and impressive fade resistance while maintaining more street-friendly characteristics than a dedicated racing compound. Choosing Between RE10 and TS20 Select RE10 when your vehicle is primarily used for competition or aggressive track driving where maximum thermal capacity and repeatable braking performance are required. Choose TS20 when your vehicle serves double duty on the street and at the track, providing an excellent balance of performance, drivability, and durability. Brake pad selection should consider vehicle weight, tire grip, rotor design, brake cooling, driving style, and operating temperatures. If you need assistance selecting the best compound, the Competition Motorsport team is ready to help. Why Choose Race Technologies 2421 Brake Pads? The compact 2421 pad shape is engineered to provide outstanding braking consistency, excellent pedal feel, and reliable thermal performance. Combined with Race Technologies' advanced friction materials, the 2421 delivers the confidence required for demanding performance driving while maintaining exceptional consistency lap after lap. Always verify the 112 mm width, 74 mm height, D48 profile, and 15.5 mm thickness against your existing brake pads before ordering to ensure proper fitment. Shop Race Technologies 2421 Brake Pads Competition Motorsport specializes in premium performance and racing brake components for enthusiasts, track-day drivers, and professional race teams. Select your preferred Race Technologies RE10 or TS20 compound above, or contact our brake specialists for assistance confirming pad shape, fitment, and compound selection. Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Pagid Racing Brake Pad Shape 1587 Pagid Racing 1587 Brake Pad Fitment Guide Make Model Build (Year) Front Rear KTM X-Bow 2008 + X Mitsubishi Lancer Evo V - Evo IX 1998 - 2006 X Nissan 350Z Coupe Track 2002 - 08 X Subaru WRX STI 3rd & 4th Gen 2003 - 16 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1587 Brake Pad RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid Racing 1587 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1587 Brake Pad RS 42 Compound RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars. Pagid Racing 1587 Brake Pad Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 1587 Brake Pad Pagid RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pad Shape 8275 Pagid 8275 Brake Pad Fitment Guide Make Model Year Front Rear BMW 3 Series (G20/G21): M340i, M340d, 320i-330i M-Technik, 330e M-Technik, 316d-330d M-Technik 2019 +     X BMW Z4 Roadster (G29): M40i sDrive, 20i-30i M-Technik 2019 +     X Toyota Supra A90 2020 +     X Toyota GR Supra 2020 +     X BMW 4 Series Coupe (G22./G23, G82): M440i, M440d, 420i-430i M-Technik, 420d-430d M-Technik 2020 +     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.