Search results for "Harness Bar":
Products
CMS Performance Clubsport Roll Bar for Porsche 911T GT3 GT3RS | 992.1 and 992.2
$3,295.00
CMS Performance Clubsport Roll Bar For Porsche 911T, GT3 & GT3RS
This Roll Bar Fits the Following Cars:
Porsche 911T, 992.1 + 992.2 (2023+)
Porsche GT3, 992.1 + 992.2 (2022+)
Porsche GT3RS, 992.1 + 992.2 (2023+)
Note: This roll bar is confirmed to fit the Porsche 992.2 (2025+).
The Ultimate Roll Bar for the Porsche 911 T, GT3 and GT3RS
The CMS Performance Clubsport Roll Bar is the latest variant of our incredibly popular 911T/GT3/GT3RS roll bar for the Porsche 992. Re-designed with steel gusseting and high-strength support tubing is added to the top and bottom of the X-brace and to all four corners, the CMS Performance Clubsport Roll Bar takes rigidity and strength to another level.
This is the strongest, highest quality bolt-in roll bar on the market for the Porsche 992 911T, GT3 and GT3RS, period. In designing and building the CMS Performance Clubsport roll bar, structural rigidity and impact protection were our primary goals. This roll bar is fully 360o TIG welded, the main tubing is 1.75" Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the gussets are machined from steel plate.
CMS Performance tailors the T/GT3/GT3RS Clubsport roll bar to take full advantage of the strongest chassis mounting points in the Porsche 992 911T/GT3/GT3RS. The main roll hoop is X-braced and gusseted, with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
Attention To Detail Is The Hallmark Of CMS Performance
The cross-bar on the CMS Performance Clubsport Roll Bar for the Porsche 992 911T, GT3 and GT3RS lets you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position.
The CMS Performance Clubsport Roll Bar was designed to leave your rear view unobstructed by additional bracing that other roll bars require due to the use of inferior materials.
CMS Performance also features a unique three-piece rear kicker that bolts to the Porsche 992 911T/GT3/GT3RS rear shock towers (where the factory GT3 Cup Car roll cage mounts). These are the strongest rear mounting points, and also add rigidity to the chassis for more precise handling. This kicker design is incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). The main roll hoop is mounted to your Porsche's steel frame structure beneath the vehicle just like the factory Cup Car cage.
Built Like a Tank. Finished Like a Porsche.
Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by our chassis fabricators and master welders, the CMS Performance Clubsport Roll Bar for the Porsche 992 911T, GT3 and GT3RS is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This also lets us use powder coat colors we've matched to Porsche 911T, GT3 and GT3RS OEM paint colors1 for a truly customized aesthetic. We also offer custom technical powder coat finishes like the amazing Superchrome! Or you can choose our rich satin black powder coat for a more low-key installation. Powder coating any color you choose is included in the price of your CMS Performance roll bar.
Don't Settle For Anything Less Than The Best
Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS.
Add Premium Racing Harnesses To Your Porsche
Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 racing harness to your order and save! These harnesses are specifically designed for the Porsche 992 T, GT3 and GT3RS and will bolt to your factory lightweight carbon bucket seats.
Or you can add four-point Schroth Profi II ASM GT3 or Sabelt Porsche GT3 4 Point harnesses, ideal for the Porsche 992 GT3 and GT3RS passenger seat that doesn't have a factory sub-strap pass through.
With six-point harnesses, we strongly recommend using the CMS Performance Sub Strap Mount to provide a solid, properly located anchor for your anti-submarine straps. The CMS Performance Sub Strap Mount is simple to install at the same time you're installing your roll bar!
Straightforward Installation Takes The Headache Out Of Roll Bars
Click Here for Installation Instructions
We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the Porsche 992 GT3 and GT3RS to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools.
CMS Performance Porsche 992.1 911T/GT3/GT3RS Clubsport Roll Bar Details
Manufacturer: CMS Performance
Manufacturer Part: CPRB-992CS
Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets.
Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware.
CNC-cut precision mounting plates
Full seat travel with any seat
Detailed installation instructions & all necessary hardware for a seamless installation
1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.
This product is intended for off-road race track use only.
Safecraft Restraints 6 Point Racing Harness | FIA
$769.00
Safecraft Restraints FIA 6 Point Racing Harness
Safecraft Restraints are without a doubt the most easily adjustable and secure racing harnesses on the market. The first time you race with a set of Safecraft harnesses will be the last time you'll ever use anything else.
The adjusters are buttery smooth and far easier to adjust than any other set of racing harnesses we've tried; and when you're in this business, you try them all. The mechanical components are of such high quality you won't believe they weren't engineered in Italy or Germany. We're happy to tell you Safecraft Restraints are made in Chicago, IL, by Grand-Am and Tudor United Sports Car Championship driver Charles Espenlaub.
Safecraft's harnesses are available with an FIA 8853-2016 rating that is good for five years from the date of manufacture.
Safecraft FIA 6 Point Racing Harness Details
Meets FIA 8853-2016.
Your choice of snap hook or bolt-in mounting for sub and lap belts.
Shoulder belts include wrap-around hardware to mount to a harness bar behind the driver
Head and neck restraint compatible 2" shoulder belts.
Less bulky and more comfortable 2" lap belts with pull-down adjusters.
2" belts are designed to cinch down lower on your hip bone.
Foam pulls at the ends of the belts make adjusting belts easy, even while wearing nomex racing gloves.
Bungee tabs on the shoulder belts to hold them out of the way when not in use.
Available in Red or Black.
Safecraft harnesses have a special anti-sub tang design integrated with the camlock. This tang must be properly positioned relative to the driver's legs. Because of this, we do not recommend Safecraft harnesses for multi-driver endurance racing if the drivers differ dramatically in size. For teams with similarly sized drivers, this is the ideal harness for quick pit stops.
Schroth Profi II ASM FE Street Legal 4 Point Harness
$629.00
Schroth Profi II ASM FE Harness
The Safe, Street Legal 4 Point Harness
The Profi II ASM FE is essentially the same as the Profi II ASM, except it features a Push-Button cam lock. The red push button that says "Press" is necessary to retain street legality and so an EMT who shows up at an accident scene will know how to release your restraint. This FE version features sewn in, bendable bolt-in tabs for the lap belt attachments, for use in applications where space is limited. It's designed to be used as a four point system, perfect for use in Driver Education cars or any other application where stock seats are retained. (A seat that was not originally designed for a sub strap should never be modified to accept one.)
Legendary Anti-Submarine Technology
The Profi II ASM incorporates Schroth's legendary ASM (Anti-Submarine) technology that is the only thing like it on the market. ASM is an extra fold of material sewn into the right shoulder belt that elongates at a different rate than the outboard belt. This allows your upper torso to twist slightly. On the rebound phase, your torso is planted firmly back in the seat rather than allowed to slide under the lap belt.
You can add a single or dual sub strap to make this belt into a 5 point or 6 point at any time. Schroth tested this harness with a HANS device and the results were great. You can use a 4 point ASM Harness with any HANS device.
Please Note:
The lap belts provided with this harness are only available with bolt-in hardware (it's sewn in) as they are most commonly needed in setups requiring street legality. If you need a different setup, please call us at (844) 438-7244.
The shoulder straps come with wrapped-in B23C bolt-in brackets that can be easily removed to wrap around a roll bar or harness bar.
See the Schroth Harness Installation Checklist here.
Sabelt Enduro Gold 6 Point Racing Harness
$799.20
$999.00
Sabelt Enduro Gold 6 Point Racing Harness
Get ready to shift your racing experience into high gear with the Sabelt Enduro Gold Full 2" racing harness! This isn't just a harness system; it's your ticket to unmatched security and speed on the track, designed exclusively for those who crave the thrill of the race and refuse to compromise on safety.
Features & Benefits
Robust 2" Shoulder Straps: Strap in with confidence. Our wide shoulder straps are engineered for comfort and safety, ensuring you stay secure through the tightest of turns and the longest of straights.
Innovative Snap Hook with Tribar Adjuster: Quick fit adjustments are critical when time is of the essence. Our innovative snap hook system allows for swift, precise fitting so you can stay focused on beating the clock.
Specialized 2” Lap Belts: Dive into endurance races with belts that mean business. Featuring carabiner attachments and tailored buckles, these lap belts are designed for the intensity of professional racing.
Quick-Release Camlock System with Guides: The gold camlock system is not just a fastener; it’s your quick-change artist. Shave crucial seconds off your pit stops with a camlock that pros can operate—even while driving!
Secure Crotch Straps with Eye-Catching Yellow Pull Loops: Double down on safety with our sturdy crotch straps and visible pull loops, designed for quick adjustments and easy access.
Added Comfort Features: Keep your cockpit organized and efficient. Velcro shoulder straps provide a secure hold for wires and cords, keeping distractions at bay while you're on the track.
Experience The Difference
Imagine strapping into the Sabelt Enduro Gold Full 2", the harness hugging your body like a second skin. As you take a corner at high speed, you feel anchored, the harness delivering instant tactile feedback. Every turn and every lap builds your confidence, knowing that you're equipped with the same technology trusted by over 80% of racers in the IMSA paddocks. It’s more than a race; it’s a declaration of your dedication to excellence.
Why Choose the Sabelt Enduro Gold?
Gold Camlock: The gold camlock system isn’t just about security; it’s about speed. Saving up to 6 seconds in driver changes can mean the difference between first and second place. It’s the preferred choice for those who know that in racing, every second counts.
Professional Endorsement: Trusted by the majority of the IMSA Weathertech and Michelin Pilot Challenge paddocks, the ENDURO GOLD is the go-to choice for professional drivers seeking reliability and performance.
Ready to Gear Up?
Don’t just participate; dominate. The Sabelt Enduro Gold Full 2" is your partner in pursuit of podium finishes. It’s not just about racing; it’s about winning. Click, secure, and propel yourself to new heights of racing performance. Order now and transform your race day into a series of victory laps!
Attachment of the shoulder belts requires the use of a roll bar or harness bar, and the sub straps must be mounted to a sub strap bar beneath the seat.
CMS Performance Roll Bar for Porsche 911 GT3 GT3RS GT2RS (991)
$2,795.00
CMS Performance Bolt-In Roll Bar for Porsche 991
This Roll Bar Fits The Following Cars:
991.1 Porsche GT3 (2014-2016)
991.2 Porsche GT3 (2018-2019)
991.1 Porsche GT3RS (2015-2016)
991.2 Porsche GT3RS (2018-2019)
991.2 Porsche GT2RS (2018-2019)
991 (all) Porsche Carrera/Turbo w/ factory sunroof (2012-2019)1
The Best Roll Bar For The Iconic Porsche 991
The CMS Performance Porsche 991 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your 991 Carrera, GT2RS, GT3 or GT3RS, period. In designing and building the CMS Performance Roll Bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why we use the strongest chassis mounting points and cross-brace the main hoop.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
Precision And Innovation Set CMS Performance Apart
Click Here for Installation Instructions
The CMS Performance Roll Bar for the Porsche 991 is designed to locate your racing harness shoulder straps at precisely the right angle (0° to -20° front-to-back) and distance (as close as possible, not more than eight inches) to the driver and passenger, regardless of your seat position. Our use of high-tech Docol R8 tubing and main-hoop cross bracing gives you an unobstructed rear view without the need for more extensive braces that roll bars made of Chromoly or mild steel have to use.
CMS Performance designed the rear kickers of the Porsche 991 Roll Bar to bolt to the rear shock towers (same as the factory GT3 Cup roll cage). Using the strongest mounting points adds rigidity to the chassis and suspension to improve handling precision. The CMS Performance main roll hoop is mounted to the steel sub-structure beneath the vehicle just like the factory cage.
Built Like A Tank. Finished Like A Porsche.
The CMS Performance Roll Bar for the Porsche 991 is fully TIG welded by master welders giving it unsurpassed structural integrity and a precision fit in the car.
CMS Performance powder coats each roll bar in-house to ensure a premium finish. This allows us to offer a full range of powder coats color-matched to your Porsche's OEM color palette2. You can also get your roll bar powder coated in one of our custom technical finishes like the amazing Superchrome! Or, you can choose a rich satin black if stealth is more your thing. Every finish option is included in the price of the CMS Performance Roll Bar.
Don't Settle For Anything Less Than The Best
Superior engineering and design, premium materials, expert construction, and a beautiful custom finish at an affordable price. That's what sets CMS Performance apart from any other manufacturer. All backed by our legendary customer service, it adds up to this: you can certainly pay a lot more for a roll bar, but you can only get the best from CMS Performance.
Add Premium Harnesses to Complete Your Safety Upgrade
Using the drop-downs above, you can add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 harnesses to your order for a truly comprehensive safety upgrade. Or add specially-engineered Schroth Profi II ASM GT3 or Sabelt Porsche GT3 four-point harnesses to your order for a simpler installation. Both six- and four-point harnesses are specially designed to bolt directly to your Porsche lightweight carbon bucket seats. (Some passenger seats do not have a factory sub-strap pass through.)
When installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mount to each seat. Custom designed to fit the Porsche lightweight carbon bucket seats, they provide solid, properly located anchors for your anti-submarine straps and are very easy to install alongside your CMS Performance roll bar.
CMS Performance Porsche 991 Roll Bar Details
Manufacturer: CMS Performance
Manufacturer Part: CPRB-991
Material: Docol R8 Advanced High-Strength Steel, 1.75" O.D.
Construction: Full-penetration 360o TIG welding, one-piece main hoop and three-piece kickers, CNC-cut precision mounting plates, CNC-machined steel interlocking clamps ease installation American-made Grade 8 hardware included
Full seat travel with any seat
Detailed installation instructions & all necessary hardware for a seamless installation
1 Be sure to select "Yes" under the Sunroof Version option above when ordering a roll bar for your 991 equipped with the factory sunroof. This version is slightly shorter than the non-sun roof roll bar.
2 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.
This product is intended for off-road race track use only.
Sabelt Steel Saloon 4 Point Harness
$279.20
$349.00
Sabelt Steel Saloon 4-Point Harness
LOCK IN. PUSH HARDER. DRIVE WITH CONFIDENCE.
You and your car are in perfect sync—the engine roars, the tires grip, and every corner becomes an opportunity to prove your skill. But when you’re pushing the limits on track day, safety isn’t optional. Enter the Sabelt Steel 4-Point Saloon Harness—your ultimate race-ready security system that keeps you locked in place, focused, and in full control.
No more sliding around in your seat or bracing yourself against G-forces with your knee. This FIA 8854/98-approved harness features 3-inch-wide shoulder and lap straps that distribute force evenly, providing unparalleled support during high-speed cornering, heavy braking, and full-throttle acceleration. The pull-up lap strap adjustment ensures a perfect fit, while the snap hook fixings with removable shoulder strap options make it adaptable to your setup. And installation? A breeze. The included eye bolts keep everything locked down securely so you can focus on driving, not fidgeting with your harness.
WHY YOU NEED THIS HARNESS
✅ Race-Proven Security – FIA 8854/98-approved for track use, meaning no compromises on safety✅ Unmatched Stability – Keeps you firmly in place, letting you focus on hitting every apex✅ Effortless Adjustments – Pull-up lap straps allow for quick, on-the-fly fine-tuning✅ Versatile Installation – Snap hook fixings with removable shoulder strap options for flexibility✅ Durable & Track-Ready – Engineered with high-strength materials to withstand serious driving forces
SPECIFICATIONS
Harness Type: 4-Point
Strap Width: 3 inches (shoulder & lap)
Adjustment Type: Pull-up lap strap for quick fine-tuning
Fixings: Snap hook fixings with removable shoulder strap options
Mounting Hardware: Includes eye bolts for secure attachment
Certification: FIA 8854/98 approved
FAQ:
Q: Is this harness FIA-approved for racing?A: Absolutely! It meets FIA 8854/98 standards, making it fully compliant for competitive racing and track use.
Q: Can I install this in my daily driver?A: While you technically can, this harness is designed for track-focused setups and not ideal for everyday street use.
Q: Will it fit my seat setup?A: The snap hook fixings and removable shoulder straps offer great installation flexibility, making it compatible with most saloon-style race seats.
Q: How do I adjust the harness for the best fit?A: The pull-up lap straps allow you to fine-tune the fit while seated, ensuring you’re locked in comfortably before you launch down the straightaway.
THE MOMENT OF TRUTH: ARE YOU READY?
Your car is built for performance—shouldn’t your safety gear match that level of precision? The Sabelt Steel 4-Point Saloon Harness ensures that every lap is as safe as it is exhilarating. Whether you’re chasing lap records or dialing in your racecraft, this harness is the upgrade you can’t afford to skip.
Click "Add to Cart" now and experience total control on track!
CMS Performance Harness Install Kit For C7 Corvette
from $125.00
CMS Performance Harness Install Kit For C7 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette Stingray & Z51, C7 (2014-2019)
Chevrolet Corvette Z06, C7 (2015-2019)
Quick and Easy Installation of Harness Lap Belts in the C7 Corvette
The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette.
Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-C7
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.
CMS Performance Harness Install Kit For C8 Corvette (2020-2024)
from $125.00
CMS Performance Harness Install Kit For C8 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette C8 Stingray & Z51 (2020-2024)
Chevrolet Corvette C8 Z06 (2023-2024)
Quick and Easy Installation of Harness Lap Belts in the C8 Corvette
The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness.
Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness.
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-C8
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, built, and powder coated in the USA
This product is intended for off-road use only.
CMS Performance Roll Bar for BMW F87 M2 (2016-2021)
$2,495.00
CMS Performance Bolt In Roll Bar For BMW F87 M2
This Roll Bar Fits the Following Cars:
BMW M2 (N55) 2016-2018
BMW M2 Competition (S55) 2019-2020
BMW M2 CS 2020-2022
The Strongest and Safest Roll Bar for the BMW F87 M2
The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation.
Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
Cutting Edge Materials and American-Made Craftsmanship
Click Here for Installation Instructions
The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance.
Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors1. You can choose an amazing technical color like Superchrome! Or satin black for a more stealthy appearance. We have over 5,000 custom powder coat colors for a truly customized look.
Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track!
CMS Performance BMW F87 M2 Roll Bar Options
CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look.
CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them.
CMS Performance BMW F87 M2 Roll Bar Details
Manufacturer: CMS Performance
Manufacturer part no.: CPRB-F87
Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel tubing throughout
Construction: One-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength
Included hardware: Grade 8, American made
CMS Performance BMW F87 M2 Roll Bar Features
Optional premium custom-designed rear seat delete for a factory-finished appearance
Precision-cut mounting plates
Designed, manufactured, and finished in the USA
American-made CNC machined solid steel interlocking joints
Allows full seat travel with virtually any seat
Comes with detailed installation instructions
1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.
Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation.
This product is intended for off-road race track use only.
MADE TO ORDER – PLEASE ALLOW APPROXIMATELY 2 WEEKS
All roll bars are made to order and are not stocked as ready-to-ship items. Please allow approximately 2 weeks for production before your order ships.
Production times are estimates and may vary slightly depending on current order volume.
CMS Performance Roll Bar for Toyota GR86 ZN8 / Subaru BRZ ZD8 (2022+)
$2,295.00
CMS Performance Bolt In Roll Bar For BRZ & GR86
This Roll Bar Fits The Following Cars:
Toyota GR86 (ZN8) 2022+
Subaru BRZ (ZD8) 2022+
As Seen In Car And Driver's BRZ Wilderness Build!
That's right, this is the exact same roll bar installed in Car And Driver's awesomely wild BRZ Wilderness Build. The guys at CD knew what to get when they needed the very best. The CMS Performance Roll Bar is the strongest, safest, most beautifully-constructed roll bar on the market for the latest Toyota GR86, and Subaru BRZ.
Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, all-business interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
This makes the CMS Performance Roll Bar for the Toyota GR86/Subaru BRZ superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position.
True Bolt-In Installation Without Sacrificing Safety or Looks
Click Here for Installation Instructions
The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates.
Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability.
Exceptional Color Options Set CMS Performance Apart
Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for Toyota and Subaru1! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation.
Rear Seat Delete Kit Available
CMS Performance offers an optional Shrader rear seat delete kit made specifically for the Toyota GR86 and Subaru BRZ. You will need to make some modifications to the RSD to fit around the mounting points of your CMS Performance roll bar. The end result is it gives your installation a finished look.
CMS Performance: The Best Products at the Best Price
An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance Toyota GR86/Subaru BRZ Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track.
CMS Performance Toyota GR86 / Subaru BRZ Roll Bar Details
Manufacturer: CMS Performance
Manufacturer Part: CPRBGR86
Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel
Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength
CNC-cut mounting plates
CNC machined high-strength-steel interlocking joints
Allows full seat travel with virtually any seat
All USA-made Grade 8 hardware included
Comes with detailed installation instructions
1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.
This product is intended for off-road race track use only.
Sabelt Silver Series Enduro 6 Point Racing Harness
$559.20
$699.00
Sabelt Silver Series Enduro Six-Point Racing Harness
The Most Flexible Racing Harness in the World
With both pull-up and pull-down lap belts, the Sabelt Silver Series Enduro Racing Harness gives you more flexibility than any other harness on the market! The new Sabelt Silver Series Racing Harness uses 2-inch belts throughout, secured with lightweight, high-strength aluminum hardware. The Sabelt Silver Series Enduros is easily adjusted in the cockpit, with bright yellow pull-down tabs on the shoulder belts that make getting in and out of the race car easier than ever. The newly-designed cam lock buckle now integrates the sub belt latches, heightening driver safety and comfort.
A number of other handy features have been added, including communication and hydration routing on top of the shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.
Sabelt is an industry-leading manufacturer of motorsport harnesses and accessories, for good reason.
Sabelt Silver Series Enduro Racing Harness Details
FIA certified
New compact B2 camlock is fully integrated with the sub-belts
Easy shoulder belt adjustment using yellow pull-down straps
Velcro patches on shoulder belts for securing loose belt ends
Communication/hydration routing on shoulder belts keep lines secure and out of the way
CMS Performance Harness Install Kit For C8 Corvette (2025+)
from $125.00
CMS Performance Harness Install Kit For C8 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette C8 Stingray & Z51 (2025+)
Chevrolet Corvette C8 Z06 (2025+)
Quick and Easy Installation of Harness Lap Belts in the C8 Corvette
The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness.
Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness.
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, built, and powder coated in the USA
This product is intended for off-road use only.
CMS Performance Roll Bar for Ford Mustang GTD
$3,295.00
CMS Performance Roll Bar for Ford Mustang GTD
This Roll Bar Fits The Following Cars:
Ford Mustang GTD coupe (2025-26)
Track-Focused Safety for Ford’s Ultimate Mustang
The CMS Performance Roll Bar is engineered specifically for the Ford Mustang GTD, Ford’s 815 HP, track-focused Mustang supercar with a rear-mounted transaxle, carbon-fiber driveshaft, dry-sump oiling, Multimatic suspension and serious road-course capability. Built from ultra-strong Docol R8 Advanced High-Strength Steel, this roll bar is designed for drivers who want proper harness mounting, added rollover protection, and a premium installation worthy of the GTD platform.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
American-Made Strength for a World-Class Mustang
Safety is the primary reason to install a roll bar in a car as capable as the Mustang GTD. The CMS Performance Mustang GTD Roll Bar is designed to position harness shoulder straps at the proper angle and distance to the driver while maintaining the clean, high-end look expected in a six-figure performance car.
Each roll bar is fully TIG welded from 1.75" x .095" Docol R8 Advanced High-Strength Steel tubing, offering exceptional strength with reduced weight compared to traditional mild steel construction.
The Mustang GTD roll bar comes complete with a custom-designed, carpeted three-panel rear seat-well cover that seamlessly integrates with the interior and fits perfectly with the roll bar for a factory-finished look. No cutting of your factory cover is required.
Precision Crafted. Custom Finished.
Every CMS Performance Mustang GTD Roll Bar is handcrafted by experienced race car fabricators, 360o TIG welded for strength and durability, and custom powder coated in-house. Choose a finish that blends with the GTD’s factory interior and exterior styling, or select a custom powder coat color for a more personalized build.
The GTD is already an uber-serious two-seat, track-focused Mustang, and this roll bar complements that purpose-built character with a clean, professional, motorsport-inspired installation. Car and Driver describes the GTD as a two-passenger, two-door coupe, reinforcing its focused cockpit layout.
See installation instructions here!
CMS Performance Mustang GTD Roll Bar Details
Manufacturer: CMS Performance
Application: Ford Mustang GTD coupe
Material: 1.75″ x .095" Docol R8 Advanced High-Strength Steel tubing
Construction: full 360o TIG welding
Finish: custom powder coat available
Included hardware: all necessary Grade 8 bolts, nuts, and washers
Designed, built, and finished in the USA
CMS Performance Mustang GTD Roll Bar Features
Purpose-built for the Ford Mustang GTD coupe
Docol R8 Advanced High-Strength Steel construction
Designed for proper racing harness shoulder belt positioning
Premium TIG-welded construction
Custom powder coat options available
American-made hardware
Clean, professional installation
This product is intended for off-road race track use only.
CMS Performance Roll Bar For Chevy Camaro (Gen 5)
$1,945.00
CMS Performance Bolt-In Roll Bar For Chevy Camaro (Gen 5)
This Roll Bar Fits the Following Cars:
Chevy Camaro Coupe, all (2010-15)
Does not fit the Camaro convertible
The Strongest Roll Bar Available For The Gen 5 Camaro
The CMS Performance Gen 5 Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were our primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows us to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline.
Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. Our Camaro roll bar forms the perfect foundation for taking your safety up a huge notch.
Roll Bar Safety and Strength Are The Priority
Safety is the main reason to install a roll bar in the first place. As racers ourselves, we sweat the details. That's why we use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece.
Our beefy main hoop straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0° to -20°) and distance to the driver. Finally our rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan.
Engineered. Fabricated. Powder Coated. All Under One Roof.
CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving.
Objects in Your Rear View Mirror Are Clearly Visible
A clear rear view is an important component of safety both on and off the race track. Our use of stronger materials and innovative design lets us keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Gen 5 Camaro roll bar is engineered with safety as our primary goal.
American-Made Roll Bar For An American Icon
Click Here for Installation Instructions
Okay, another reason we install roll bars is that they look cool. We're gear heads, we get that. Each CMS Performance Gen 5 Camaro roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Camaro factory colors1, giving your Camaro a personalized look that will last.
None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there.
Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS Performance roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure.
CMS Performance Gen 5 Camaro Roll Bar Details
Manufacturer: CMS Performance
Manufacturer part no.: CPRB-CamaroG5
Material: 1.75″ x .095" Docol R8 Advanced High-Strength Steel tubing
Construction: fully 360o TIG welded
Design: one-piece main hoop/kicker with detachable kicker feet
Weight: 51 lbs. (23.2 kg)
Rear seat delete: custom-made Shrader rear seat delete (optional)
Gen 5 Camaro Roll Bar Features
Precision CNC-cut mounting plates
Designed, built, and powder-coated in the USA
American-made CNC machined solid steel interlocking clamps
Allows full seat travel with any seat
Straightforward installation and perfect fitment
Comes with all necessary Grade 8 American-made hardware
1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.
This product is intended for off-road race track use only.
MADE TO ORDER – PLEASE ALLOW APPROXIMATELY 2 WEEKS
All roll bars are made to order and are not stocked as ready-to-ship items. Please allow approximately 2 weeks for production before your order ships.
Production times are estimates and may vary slightly depending on current order volume.
CMS Performance Harness Install Kit For Gen 6 Camaro
from $125.00
CMS Performance Harness Install Kit For Gen 6 Camaro
This Product Fits The Following Cars:
Chevrolet Camaro Coupe, all (2016+)
Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro
The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro.
Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-G6C
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.