Search results for "AP racing":

Sparco K-Rapid Kart Racing Shoes The Sparco K-Rapid Kart Racing Shoes combine fast, precise adjustment with lightweight construction and responsive pedal control. Developed for competitive kart racing, the K-Rapid features Sparco’s rotor quick-closure system, allowing drivers to fine-tune the fit without traditional laces. A smooth microfiber upper provides a supportive and flexible feel, while the breathable lining helps manage heat during demanding indoor and outdoor karting sessions. The elasticated rear ankle bellow allows natural movement when braking and accelerating without sacrificing heel support. The ultra-light natural rubber outsole uses differentiated grip textures to balance pedal sensitivity with dependable traction. Its oil-resistant and wet-surface grip characteristics help maintain control both inside the kart and while moving through the paddock. Rotor Quick-Closure System The K-Rapid uses a dial-operated rotor closure that evenly tensions the cable across the foot. This system allows quick and precise adjustments, helping the shoe maintain a secure fit throughout practice, qualifying, and racing. The low-profile cable design also eliminates loose conventional laces that can require readjustment or become caught around kart components. Smooth Microfiber Upper The upper is constructed from lightweight microfiber leather for a comfortable balance of flexibility, support, and durability. Its smooth profile reduces unnecessary bulk while allowing the shoe to conform closely to the foot. Breathable Interior Lining A breathable inner lining promotes airflow around the foot and helps reduce heat buildup. This improves comfort during long races, warm-weather events, and physically demanding indoor karting sessions. Elasticated Rear Ankle Bellow The flexible rear bellow allows the ankle and Achilles area to move naturally during pedal operation. This unrestricted movement helps reduce pressure while maintaining support around the heel. Shock-Absorbing Footbed An internal shock-absorbing footbed helps isolate vibration transferred through the kart chassis and pedals. Reducing vibration can improve comfort and limit foot fatigue during long sessions. Ultra-Light Natural Rubber Sole The lightweight rubber outsole is designed specifically for kart racing. Differentiated grip textures provide an effective balance of traction, flexibility, and direct pedal feedback. Grip on Wet and Oily Surfaces The natural rubber compound provides dependable traction on kart pedals and trackside surfaces, including areas that may be damp or exposed to oil and automotive fluids. Abrasion-Resistant Protection High-abrasion-resistant reinforcement is positioned around the toe and heel, helping protect the shoe from repeated contact with pedals, chassis components, and paddock surfaces. FIA 8877-2022 Karting Approval The Sparco K-Rapid is homologated to the FIA 8877-2022 karting equipment standard. This makes it suitable for competitions requiring footwear certified to the latest FIA karting requirements. Sparco K-Rapid Kart Racing Shoe Features FIA 8877-2022 homologated Designed specifically for competitive kart racing Precision rotor quick-closure system Fast and evenly distributed fit adjustment Smooth lightweight microfiber upper Breathable and comfortable inner lining Elasticated rear ankle bellow Supportive fit with unrestricted ankle movement Shock-absorbing internal footbed Helps reduce vibration and foot fatigue Ultra-light natural rubber outsole Differentiated grip textures Responsive brake and throttle pedal feel Grip on wet and oily surfaces Abrasion-resistant toe reinforcement Abrasion-resistant heel protection Suitable for indoor and outdoor kart racing Technical Specifications Product: Sparco K-Rapid Kart Racing Shoes Manufacturer: Sparco Product Type: Kart racing shoes Upper Material: Smooth microfiber leather Closure: Rotor-operated cable closure system Lining: Breathable interior lining Rear Construction: Elasticated ankle bellow Footbed: Shock-absorbing insole Outsole: Ultra-light natural rubber Sole Design: Differentiated grip textures Protection: Abrasion-resistant toe and heel reinforcement Certification: FIA 8877-2022 European Sizes: 36–48 Sparco K-Rapid Kart Racing Shoe Size Chart Frequently Asked Questions Are the Sparco K-Rapid Kart Racing Shoes FIA approved? Yes. The Sparco K-Rapid is homologated to the FIA 8877-2022 karting equipment standard. Drivers should verify the current footwear requirements for their racing series, class, and event. How does the rotor closure system work? The rotor dial tightens the cable across the shoe to create an evenly distributed and adjustable fit. It can be quickly tightened or released between sessions without tying conventional laces. Do the Sparco K-Rapid shoes provide good pedal feel? Yes. The ultra-light rubber outsole is designed to provide direct brake and throttle feedback while maintaining dependable pedal grip. What is the benefit of the elasticated rear ankle bellow? The rear bellow allows the ankle to move naturally during braking and acceleration while maintaining support around the heel and Achilles area. Are the Sparco K-Rapid shoes breathable? Yes. The interior uses a breathable lining designed to improve airflow and reduce heat buildup during long karting sessions. Are the Sparco K-Rapid Kart Racing Shoes fireproof? No. The K-Rapid is designed and homologated specifically for kart racing. It should not replace fire-resistant footwear required for auto racing. Can the Sparco K-Rapid be used for indoor karting? Yes. The secure closure, breathable construction, and responsive sole make the K-Rapid suitable for both indoor and outdoor kart racing. Does the K-Rapid provide grip on wet surfaces? Yes. The natural rubber outsole is designed to maintain traction on wet or oily surfaces while providing the sensitivity needed for precise pedal control. What sizes are available? The Sparco K-Rapid is generally available in European sizes 36 through 48. Refer to the Sparco karting shoe size chart before choosing a size. How should Sparco K-Rapid Kart Racing Shoes fit? Karting shoes should fit securely around the heel and midfoot without painful pressure points. The rotor closure should feel supportive without restricting circulation or natural ankle movement. Do karting shoes improve driving performance? Karting shoes do not automatically reduce lap times, but their thin, responsive soles and secure fit can improve pedal feedback, consistency, and driver confidence. Should special socks be worn with the K-Rapid? Special socks are not required, although thin moisture-wicking karting socks can improve comfort and reduce heat buildup during long sessions. How should the Sparco K-Rapid shoes be cleaned? Clean the exterior using a damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, submerge them in water, or place them near direct heat. Quick Adjustment and Precise Karting Control The Sparco K-Rapid Kart Racing Shoes combine a precision rotor closure, breathable microfiber construction, flexible ankle support, and a high-grip natural rubber outsole. Their FIA 8877-2022 homologation makes them a premium choice for kart racers seeking secure fit adjustment, durable protection, and responsive pedal feel.

Pagid Racing Brake Pads Shape 4928 Pagid 4928 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 991 GT3 Cup [PFC brakes 28/26 mm] 13 -19 X Porsche 991 GT3 Cup MR [PFC brakes 28/26 mm] 13 -19 X Porsche Cayman GT4 Clubsport [PFC brakes 28/26 mm] 16 -20 X Porsche Cayman GT4 MR [PFC brakes 28/26 mm] 16 -20 X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Applications include GT cars, touring cars and prototype endurance racing. Due to excellent modulation characteristics, RSL 2 is often also used in sprint races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2E Compound RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.

Pagid Racing Brake Pad 1908 Pagid 1908 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 993 GT2 & RSR [disc ø 380 mm] 1995 - 97 X Porsche 996 GT3 R & GT3 RS [race cars] 2000 - 05 X Fits the Following Calipers: Make Type Remarks Shape No. Alcon TA 4. CAR84 [4484] 18mm,22mm,24mm 1842, 1908, 8090 Brembo Big Red [type 132A family] 18mm,22mm,24mm 1842, 1908, 8090   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1908 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1908 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1908 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 1908 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Ferodo FRP3076 Brake Pads Ferodo FRP3076 Brake Pad Fitment Guide Make Type Remarks Shape No. Alcon TA6. CAR89, CAR11 [4489] D51 17mm,18mm,25mm 1538, 1903, 8018 AP Racing CP5070 D51 17mm 8018 Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FRP3076 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FRP3076 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FRP3076 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Sparco EVO Performance Carbon Fiber Racing Seats The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track. Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line. As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. Sparco Evo Performance Seat Sizes The Sparco EVO series is among the most versatile competition seats we carry, available in the following three sizes to ensure proper fitment: EVO CARBON – Medium (up to 34” waist) EVO L CARBON – Large (up to 36” waist) EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Features Ultra-light pre-preg carbon fiber shell Excellent fitment into small vehicle cockpits Three sizes: Medium through XL Excellent ergonomics Leather and alcantara upholstery FIA 8855-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Pagid Racing Brake Pad Shape 8253 Pagid 8253 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Alfa Romeo Giulia 2.9 (952) Quadrifoglio [ceramic brakes] 2017 - 23     X Chevrolet Camaro ZL1 and ZL1 1LE (Gen 6) 2017 - 24     X Dodge Viper ACR [ceramic brakes] 2016 - 17     X Ford Ford GT (Gen 2) [ceramic brakes] 2017 - 22     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Pagid Racing Brake Pad Shape 8037 Pagid 8037 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 997 GT3 Cup Grand Am spec. 07 - 12 X Porsche 997 GT3 Cup S 08 - 12 X Porsche 997 GT3 R [race car, normal calipers] 07-12 X Fits the Following Calipers: Make Type Remarks Shape No. Alcon B type [4441] 16mm, 18mm, 20mm, 22mm,25mm 1595, 1607, 1674, 8037, 8267 Brembo 07.5139. [type 132 or B13 family] 16mm, 20mm, 22mm, 25mm, 26.5mm, 29mm 1595, 1607, 1674, 2704, 8037, 8191 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Race Technologies P1116 Racing Brake Pads Race Technologies P1116 / 2428 Racing Brake Pads Fitment Guide Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 2011 - 15 X Porsche 991.2 3.0 Carrera [iron brakes] 2015 + X Porsche 981 Boxster Spyder 2015 + X Porsche 718 Cayman GTS 4.0 [cast iron brakes] 2016 + X Porsche Cayenne [cast iron or ceramic brakes] 2006 + X VW Touareg [ceramic brakes] 2008 + X   The Race Technologies P1116 brake pad is a wide-format, high-performance pad shape designed for compatible performance braking systems used in demanding HPDE, track day, club racing, and motorsport applications. Measuring 187.5 mm wide by 64 mm high with a 49 mm friction material depth and 16 mm pad thickness, the P1116 features a distinctive curved friction surface and specialized backing plate geometry for precise fitment. Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1116 allows drivers to select the friction characteristics best suited to their vehicle, brake system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and friction compound is essential for predictable, consistent braking performance. Race Technologies P1116 Brake Pad Specifications Pad Shape: P1116 / 2428 Overall Width: 187.5 mm Overall Height: 64 mm Friction Material Depth: 49 mm Pad Thickness: 16 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound The P1116 features two large outer retaining openings, a centrally positioned upper relief, and two angled friction grooves. Its wide backing plate and distinctive curved friction surface distinguish it from other performance brake pad shapes, making accurate pad identification particularly important when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1116 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1116 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1116 Brake Pads? The Race Technologies P1116 combines a substantial 187.5 mm overall width with a 64 mm height, 49 mm friction material depth, and 16 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems. Distinctive Race Technologies P1116 backing plate geometry 187.5 mm overall width and 64 mm overall height 49 mm friction material depth 16 mm nominal pad thickness Choice of RE10 racing or TS20 street/track compounds Race Technologies P1116 Brake Pad Fitment The Race Technologies P1116 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 187.5 mm overall width, 64 mm overall height, 49 mm friction material depth, 16 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1116 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1116 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Pagid Racing Brake Pad Shape 8101 Pagid 8101 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Audi R8 GT4 + GT4 Cup [race car] 2018 +     X Ferrari 488 GT3 [race car] 2016 - 23     X Lamborghini Huracán GT3 [race car] 2015 +     X Lamborghini Huracán Trofeo [race car] 2015 +     X Mercedes SLS AMG GT3 [race car] 2013 - 15     X Audi R8 LMS GT2 [race car] 2020 - 24     X Porsche 991.2 GT2 RS Clubsport [race car] 2018 - 19     X Fits the Following Calipers: Make Type Remarks Shape No. Brembo Type B28 family; 6-piston D64 wide 21mm, 25mm, 26mm, 29mm, 31mm 8100, 8101, 8102, 8103, 8194   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Pre-Bedding Service Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes. Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts. To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.

Pagid Racing Brake Pad Shape 1204 Fitment Guide Pagid 1204 Brake Pad Fitment Guide (FMSI D372) Make Model Build (Year) Front Rear Porsche 928 S & S4 & GT 1985 - 95 X Porsche 944 2.5 Turbo 1987 - 91 X Porsche 964 3.3 Turbo & Turbo S 1988 - 91 X Porsche 964 3.6 Carrera RS 1991 - 93 X Porsche 968 3.0 Coupe Sport 1991 - 95 X Porsche 993 3.6 Carrera & C4 1993 - 97 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid 1204 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid 1204 Brake Pad RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid 1204 Brake Pad Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Schroth Profi 2x2 Porsche GT2/GT3/GT4 Racing Harness Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you're putting harnesses in your Porsche GT3, GT3RS, or GT4 with the Lightweight Bucket (LWB) seat setup, you'll want these belts! The Flexi 2x2 GT3 features 2” shoulder belts ideal for Frontal Head Restraint (FHR or HANS) devices. It has 2" pull-down Profi lap belts with sewn-in anchors specifically made for Porsche's carbon fiber Lightweight Bucket ("LWB") seats. A T-bar adjustable sub-strap is standard, and shoulder- and sub-strap attachment hardware is wrapped in. The FHR/HANS specific shoulder belts are designed to make the driver safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR or HANS device, creating optimal force distribution on the surface of the device. The main impetus behind the 2" lap belt is added safety. A 2" belt rides within the crest of the human pelvis, where a 3" belt would rest on the edges. This allows you to get the belt up to an inch-and-a-half tighter, so the lap belt will work earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust as there's less friction through the adjuster. Comes with Porsche-specific attachments for the lap belts and snap-in attachments at sub-strap points. The shoulders come ready to be wrapped around a roll bar or roll cage. Bolt-in attachments can be purchased separately for shoulder- and sub-straps. Available in Black or Red. (Blue or Yellow are available by special order.) Note: If you drive a GT3 Cup car or are driving a Porsche with a fixed-back racing seat, a standard non-Porsche harness such as the Enduro 2x2 or Flexi 2x2 would be better suited for your vehicle. See Schroth's Harness Installation documentation here. Schroth Flexi 2x2 Porsche Harness Details Manufacturer: Schroth Manufacturer part no.: SR 94700US FHR/HANS specific 2” shoulder belts 2” Flexi pull-down lap belts with sewn-in Porsche hardware T-bar adjustable sub-strap Rotary cam lock FIA 8853-2016 homologation

Pagid Racing Brake Pad Shape 4581 Pagid 4581 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Ferrari 458 Speciale [ceramic brakes] 2013 - X Ferrari 488 [ceramic brakes] 2015 - X Ferrari 488 Pista [ceramic brakes] 2018 - X Ferrari F8 Tributo [ceramic brakes] 2019 X Fits the Following Caliper: Make Type Remarks Shape No. Brembo Extrema 4-piston 15mm 4581   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Sabelt GT-AM Racing Seat Based on the same shell shape as Sabelt's top of the range GT Pro racing seat, the Sabelt GT-AM is a professional competition seat manufactured from lightweight fiberglass, making it a more affordable option to club racing competitors. Sabelt GT-AM Offers Exceptional Safety Features The Sabelt GT-AM seat was designed to offer superb levels of safety along with exceptional comfort. Deep side bolsters not only offer excellent lateral support, but they also keep the driver's legs inside the seat structure for greater impact protection. The integral wrap-around head support helps prevent neck injuries by checking excessive lateral head movement during a crash. Deep wrap-around shoulders provide support to the upper body, reducing lateral movement. Sabelt GT-AM Makes Customized Driver Comfort Easy The Sabelt GT-AM uses removable pads constructed from high-density foam to absorb vibration and shock loads, improving comfort and reducing driver fatigue. Replacement cushions in different thicknesses are available, allowing the driver to tailor the fit of the GT-AM. The Sabelt GT-AM is compatible with all types of head-and-neck devices, including hybrid versions. Six harness slots allow the seat to be used with any type of racing harness. For FIA homologation purposes, the Sabelt GT-AM racing seat must be used with specific side mounts available in the drop-down menu. Sabelt GT-AM Racing Seat Details: FIA 8855-2021 approved Lightweight fiberglass shell One full pad set is included (Medium, Large, or X-Large) Integral wrap-around head protection Deep side bolsters provide lateral support and impact protection Additional seat pads available in different thicknesses for tailored fit Homologated for 10 years from the date of manufacturer Racing Seat Dimensions:

Pagid Racing Brake Pad Shape 8081 Pagid 8081 Brake Pad Fitment Guide (FMSI D1045) Make Model Build (Year) Front Rear Aston Martin DB11 [cast iron brakes] 16 - 23 X Aston Martin Vantage [cast iron brakes] street car 18 - X Audi RS6 (C6) 08 - 10 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit 16 - X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro SS 1LE [Gen 6] (6 piston Brembo) 16 - X Chevrolet Corvette C7 Z06 [iron brakes] 15 - X Dodge Challenger HellCat & 392 15 - X Mercedes C 63 AMG [W204] 08 - 14 X Mercedes CLK 63 AMG Black Series 06 - 09 X Nissan R35 GTR 08 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound Pagid RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape 1270 Pagid 1270 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Audi S1 Sport Quattro Rally Car 84 - 85 X BMW M3 [E92] GT4 race version 09 - 14 X BMW Z4 GT3 [race car] 13 - 15 X Lancia Stratos HF Group N4 Rally 74 - 76 X Nissan GT-R NISMO GT3 [race car] 15 - X Renault Clio II V6 [race car] 01 - 05 X KTM GTX 2020 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid 1270 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid 1270 Brake Pad Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.