Side Brackets & Sliders

Racetech RT1005M Aluminum Side Mounts Light Weight and Strong Racing Seat Side Brackets Racetech milled aluminum alloy bracket set for side-mounting seats to your car floor or chassis. CNC machined from from strong, lightweight 5mm thick 5083 aluminum alloy. Sold as a pair. Racetech RT1005M Brackets Fit the Following Seats: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RT Saker (with modification) RT Road RT RoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG Racetech RT1005M Specs and Details: Weight: 2.52 lbs (1.14 kg) per pair Materials: 5mm 5083 aluminum alloy Seat hole spacing: nominal 260mm; min 252mm; max 264mm

Racetech Steel Side Mounting Brackets Racetech RTB2009S satin black powder coated 3mm steel brackets for side mounting seats. Sold as a pair. Alongside the Racetech 4100-Series seats, they have developed a classy but affordable new bracket set. A staggered hole-and-slot pattern allows fine adjustments for the optimal seating position. Slots in the foot of each bracket also allow a little more lateral tolerance during installation. Use With These Racetech Seats: RT4009, RT4009W RT4009HR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT9119HRW, RT9119THR, RT9119WHR, RT9119WTHR Hole Spacing (Seat): Nominal: 295mm Minimum: 290mm Maximum: 300mm

Racetech RTB2115B Seat Back Bracket The Racetech RTB2115B bracket for back-mounting seats is made from 5mm 5083 aluminum alloy. This bracket bolts to the rear shoulder section of Racetech 119-Series racing seats and works in conjunction with Racetech RTB2005C clamps. This allows you to brace your racing seat to a lateral or diagonal roll cage or roll bar tube. Four holes must be drilled into the RTB2115B bracket to accept the Racetech clamps once you have your racing seat set-up in the optimum driving position. For more info, take a look at these racing seat back-mounting instructions. Racetech RTB2115B Is Compatible With These Racetech Seats: RT4119HRW RT4119THR RT4119WHR RT4119WTHR RT9119HR RT9119THR RT9119WHR RT9119WTHR

OMP Racing Seat Slider Easily adjust your racing seat to the optimal position with an OMP racing seat slider. OMP seat sliders are best for any OMP seat application. They're designed to allow the driver to adjust the seat position with precision, giving you a position that's completely custom to you. OMP seat slider sets employ a double locking mechanism for increased strength and safety. This slider is not FIA approved.

Sabelt Seat Slider System The Sabelt Seat Slider System is recommended for any bottom mounted seat1 where adjusting the seat position fore and aft is necessary. Features a double-locking mechanism for increased safety. Fits bottom-mount seats only. These sliders are not designed to fit side-mount seats1. The rails with the notches along the sides are the stationary bottom rails and are 15-1/2″ (394mm) long. The rails that mount to the seat are 12-3/8″ (314mm) long. 1 Note: seat sliders are not recommended for use in racing or competition applications.

Sabelt Steel Side Mount Brackets For use mounting most side mount racing seats. Sabelt Steel Side Mount Bracket Details Manufacturer: Sabelt  Manufacturer part no.: Z200087 Material: 3mm steel Finish: painted black Homologation: FIA compliant Bolt pattern: 290mm (11.4 in.) Standard length

Sparco Track Set Seat Slider The Sparco Track Set, more commonly known as seat sliders, are recommended for any seat application1. This seat track set allows you to adjust your seat position fore and aft for a customized, comfortable cockpit. Sparco seat tracks employ a double locking mechanism for increased safety. 1 Note: seat sliders not intended for racing or competition use. Sparco Track Set Seat Slider Details Manufacturer: Sparco Manufacturer part no.: 00493 Double locking mechanism for increased safety Seat tracks are not intended for race applications

Sparco Steel Side Mount Seat Brackets The Sparco Steel Side Mount competition seat mounting brackets have multiple holes, giving you the flexibility to find the safest and most comfortable mounting position for your racing seat. Sparco Steel Side Mount Details Manufacturer: Sparco Manufacturer part no.: 004902 Material: steel Finish: powder coated black Weight: 5.0 lbs (2.3 kg) per set

OMP Racing Seat Side Mount Brackets OMP's new ultra-strong material is FIA approved. Choose from three different styles. Tall Aluminum Mount Details: Length: 422.5mm Thickness: 6.0mm Tall Steel Mount Details: Length: 380.0mm Thickness: 3.0mm Low Steel Mount Details: Length: 350.0mm Thickness: 3.0mm 

Racetech Zinc-Plated Steel Side Mount Brackets Racetech zinc-plated, 3mm steel brackets for side-mounting seats. Sold as a pair. These brackets are suitable for use with the following seat models: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RTSaker (with modification) RTRoad RTRoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG

Schroth Bolt Kit For Porsche GT3 And GT4 For use with the following harnesses: Schroth Porsche GT3/GT4 ASM Harness (4 Point) Schroth Enduro 2x2 Porsche GT3 6 Point Racing Harness Schroth Flexi 2x2 Porsche GT3-GT4 6 Point Racing Harness Looking to install Schroth GT3/GT4 harnesses in your Porsche equipped with factory Lightweight Carbon Bucket seats and three-point seat belts? This bolt kit will attach your Schroth harness to your Lightweight Carbon Buckets while allowing proper rotation for ideal lap belt positioning. Schroth Porsche Bolt Kit Includes: (2) S-82 washers (2) S-104 sleeves (2) S-184 washers (2) SG-29 bolts

Competition Motorsport Racing Seat Mounting Hardware Kit Complete Mounting Kit Includes: Four (4) 8x1.25 25mm Bolts Four (4) 8x1.25 20mm Bolts Four (4) 8x1.25 Locking Nuts Eight (8) Washers (Sparco Part Numbers 50001 and 50002, everything you need in one place.)

Easily Install OMP HTE Seats In Your Porsche The Brey Krause R-9751 Driver-side Racing Seat Side Mount Bracket (for passenger-side, see R-9752) allows for the easy installation of OMP HTE Racing Seats into Porsche 996, 997, Boxster, and Cayman models using the OEM factory non-power sliders. It can also be used with BK's R-9044 assembly. Designed to keep the seat as low as possible, the four mounting positions provide a wide range of recline options. An inboard threaded seat belt mount is integrated into the adapter. Brey Krause R-9751 OMP HTE Seat Adapter Details Manufacturer: Brey Krause Manufacturer part no.: R-9751 Fitment: all Porsche 996, 997, 986, 987 models with non-power seats. Racing seat: fits OMP HTE Racing Seats. Material: 11 gauge, Type 304, stainless steel. Finish: powder coated black wrinkle-finish. Weight: 4.0 lbs. Note: Factory non-power (manual) slider assembly from the 996/986 (and some 997/987s) required for installation. Will not fit sliders with power option.

CMS Performance Ultimate Race Seat Mounting Kit For BMW G87 M2 This Kit Fits the Following Vehicles: BMW G87 M2 (2023+) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Motorsports Enthusiasts! Are you a racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your BMW on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your BMW. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for BMW Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance BMW on the race track. Custom Powder Coat to Match Your BMW The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable satin black finish powder coat. CMS Performance can also custom powder-coat your kit in just about any BMW OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the BMW color you want in your Order Notes at check-out. CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory BMW seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Detailed installation instructions Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your BMW. CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your BMW. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider.