Roll Bar Accessories

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette C8 Stingray & Z51 (2020-2024) Chevrolet Corvette C8 Z06 (2023-2024) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

Allstar Performance SFI 45.1 Roll Bar Padding Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications. Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging from  1.25 inches to 1.75 inches in diameter. Allstar Performance Roll Bar Padding Details: Manufacturer: Allstar Performance Thickness: 0.75 inches Length: sold in individual 36-inch lengths Maximum Bar Diameter: 1.75 inches Minimum Bar Diameter: 1.25 inches Certification: SFI 45.1 Attachment: attaches to roll bar with adhesive backing

CMS Performance Locking Harness Collars Designed for CMS Performance Roll Bars to Keep Harnesses In Place These locking roll bar collars from CMS Performance are designed and perfectly sized to fit roll bars with either 1.75" or 1.50" O.D. cross-bars. Precision CNC machined CMS Performance Roll Bar Harness Collars help keep your harness shoulder straps in exactly the right place on your roll bar. These easy-to-install double-split aluminum collars come with high-strength Allen bolt hardware. Anodized a deep rich satin black, the look as good as they perform. Strong and lightweight, the CMS Performance Harness Collars are a great safety addition to your CMS Performance roll bar. CMS Performance Roll Bar Harness Collar Details Manufacturer: CMS Performance Manufacturer Part Numbers: RB-COLLAR-AL175-BLK or RB-COLLAR-AL150-BLK Features: clamps tight to help keep your shoulder straps firmly located in the proper position Material: aluminum Inside diameter (when tightened): 1.50" or 1.75" Finish: satin black anodizing Roll bar collars are priced individually.

CMS Performance Sub Strap + Lap Belt Mount for GR Supra Fits the Following Vehicles: Toyota GR Supra, A90/91 (2020+) Toyota GR86 (2022+) Subaru BRZ, ZN8 (2022+) The Best Way to Mount Harness Lap and Sub Belts in Your Toyota/Subaru The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Harness Install Kit For GR Corolla This Product Fits The Following Cars: Toyota GR Corolla (2023+) Quick and Easy Installation of Harness Lap Belts in the GR Corolla The CMS Performance Harness Install Kit for the GR Corolla provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your GR Corolla. The kit is typically used along with the bolt-in CMS Performance Roll Bar for the GR Corolla. Together they give GR Corolla driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance GR Corolla Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance GR Corolla Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the GR Corolla, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the GR Corolla that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Sub Strap + Lap Belt Mount for BMW E46 This mount fits BMW E46 cars (1999-2006), driver or passenger side The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-E46 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Shrader Performance Rear Seat Delete For Mustang S197 Weighing about 30 pounds less than the factory rear seats, the Shrader Rear Seat Delete kit removes as much weight as possible while retaining a strong, solid support. Tested on the S197 and confirmed fitment. The back panel easily folds down for access to the trunk (a first in Mustang RSD designs) by popping out two plastic clips.  The fully-carpeted rigid molded plastic panels are strong enough for luggage, tires, race tools, and more.  With sound insulation padding built into each panel, no detail was spared.  Even the trunk area has a finished look! Detailed instructions are included, using factory bolt holes for mounting.  Black carpet only.  Does not fit convertibles. This Rear Seat Delete Fits The Following Cars All 2005-2014 Mustang Fastback (hardtop) including V6. Does not fit convertibles. Straightforward Installation Basic metric sockets, T40 and T50 Torx bits. Some cutting is involved when fitting around the CMS Performance Roll Bar. Click here for basic installation instructions

Porsche Carbon Bucket Seat Lap Belt Mounts Tired of paying a premium for Porsche harnesses?  Can't find the harness you want with the Porsche-specific bolt-in attachments?  Too much hassle to unbolt the lap belts after a track day?  Tired of driving to work sitting on your racing harness?  Us to, that's why we designed and manufactured the lap belt mounts that allow you to use a standard clip-in racing harness.  Simply clip them in while at the track and unclip them and store them in your CMS gear bag when you are not.  These Porsche Carbon Bucket Seat Lap Belt Mounts provide dedicated attachment points for clip-in lap belts of a racing harness when using Porsche OEM carbon bucket seats. The kit includes a pair of heavy-duty steel brackets designed to install at the seat mounting locations. Each bracket features an upright mounting tab that provides a secure and convenient attachment point for the left and right clip-in lap belts of your harness. Porsche Lap Belt Mount Features Designed for Porsche OEM carbon bucket seat applications Provides dedicated racing harness lap belt mounting points Heavy-duty steel construction Black protective finish Upright harness attachment tab Installs at the seat mounting location Helps simplify proper lap belt installation and routing Includes left and right mounting brackets Sold as a pair Designed for Racing Harness Installation Porsche factory carbon bucket seats are an excellent choice for track use, but adding a multi-point racing harness requires suitable mounting locations for each belt. These brackets provide dedicated attachment points for the lap portion of the harness without requiring the harness to be bolted to the carbon seat shell 3 point seat belt mounting points. The compact design keeps the mounting hardware close to the seat while providing a strong attachment location for compatible bolt-in or harness mounting hardware. What's Included 1 Left-side lap belt mounting bracket 1 Right-side lap belt mounting bracket Installation The brackets install at the Porsche seat mounting locations and provide an upright attachment point beside the seat for the harness lap belts. Always verify proper harness belt angles, hardware engagement, and mounting procedures according to the harness manufacturer's instructions. Questions About Porsche Harness Fitment? Are these mounts made from carbon fiber?No. The mounts are steel. “Carbon” refers to their intended use with Porsche carbon bucket seats. Are both sides included?Yes. The kit includes one left-side and one right-side lap belt mounting bracket for one seat. Do these mount directly to the carbon seat?No. They are designed to install at the seat mounting location rather than attaching directly to the carbon seat shell. What part of the harness do these mount?These brackets are designed to provide attachment points for the left and right lap belts of a multi-point racing harness. Do I still need other harness mounts?Yes. A complete harness installation may also require proper shoulder-belt and anti-submarine belt mounting points depending on the harness configuration.

CMS Performance Lap Belt Mounts for Subaru WRX Secure Racing Harness Lap Belt Mounting for Your Subaru WRX The CMS Performance Lap Belt Mounts for Subaru WRX provide strong, dedicated mounting points for the lap belts of your racing harness while retaining the factory seats and normal seat operation. Designed specifically around the Subaru WRX seat mounting system, the CMS Performance Lap Belt Mounts install beneath the factory seat slider tracks using the vehicle's existing seat mounting locations. No drilling, cutting, welding, or permanent modification to your WRX is required. The Right Way to Mount Harness Lap Belts in Your Subaru WRX A properly installed racing harness requires strong and correctly positioned mounting points. The CMS Performance Subaru WRX Lap Belt Mounts eliminate the need for improvised mounting solutions by providing dedicated attachment points specifically for your harness lap belts. The mounts utilize the factory seat mounting locations beneath the seat slider assembly, creating a clean and secure installation while keeping the hardware tucked discreetly beneath the seat. 1/4-Inch Solid Carbon Steel Construction CMS Performance Lap Belt Mounts are manufactured from 1/4-inch solid carbon steel and feature fully TIG-welded harness mounting tabs for exceptional strength and rigidity. Each mount is finished in a durable satin black powder coat that protects the steel and allows the hardware to blend cleanly into the Subaru WRX interior. 1/4-inch solid carbon steel construction Fully TIG-welded harness mounting tabs Dedicated racing harness lap belt mounting points Durable satin black powder-coated finish Low-profile vehicle-specific design True Bolt-In Installation With No Drilling The CMS Performance Subaru WRX Lap Belt Mounts install using existing factory seat mounting locations and hardware. There is no need to drill holes through the chassis, cut the interior, or weld mounting plates into the vehicle. The mounts can also be removed without leaving permanent modifications behind, making them an excellent option for street-driven WRXs that also see track use. Retains Factory Seat Adjustment The CMS Performance Lap Belt Mounts are engineered to integrate with the factory Subaru WRX seating system without sacrificing normal seat operation. Fits driver or passenger seat applications Maintains full fore/aft seat adjustment Maintains factory up/down seat adjustment Does not interfere with the OEM three-point seat belt Does not interfere with factory airbag hardware Installs beneath the factory seat slider tracks No drilling or cutting required Built for Street and Track Subaru WRXs For Subaru WRX owners participating in track days, HPDE events, time trials, autocross, or other motorsport activities, the CMS Performance Lap Belt Mounts provide a clean solution for adding dedicated racing harness mounting points while retaining the factory interior. The low-profile design keeps the mounts nearly invisible once installed while providing convenient attachment points when your racing harness is in use. Designed and Manufactured in the USA The CMS Performance Subaru WRX Lap Belt Mounts are designed, manufactured, TIG welded, and powder coated in-house in the USA. CMS Performance components are engineered specifically for motorsport applications with an emphasis on strength, vehicle-specific fitment, straightforward installation, and clean integration with the factory vehicle. CMS Performance Subaru WRX Lap Belt Mount Details Manufacturer: CMS Performance Product: Racing Harness Lap Belt Mounts Vehicle: Subaru WRX Construction: 1/4-inch solid carbon steel Welding: TIG-welded construction Finish: Satin black powder coat Installation: Bolt-in using factory seat mounting locations Seat Position: Driver or passenger Vehicle Modification: No drilling or cutting required Seat Adjustment: Retains full fore/aft and up/down adjustment OEM Compatibility: Does not interfere with factory seat belts or airbag hardware Manufacturing: Designed and manufactured in the USA Frequently Asked Questions What do the CMS Performance Subaru WRX Lap Belt Mounts do?They provide dedicated attachment points for the lap belt portion of a racing harness without requiring permanent modifications to the vehicle. Do the Subaru WRX Lap Belt Mounts require drilling?No. They install using the factory seat mounting locations and require no drilling, cutting, or welding to the vehicle. Can the mounts be installed on the driver and passenger sides?Yes. The mounts are designed for use with either the driver or passenger seat. Will I still be able to adjust my factory seat?Yes. The mounts are designed to retain normal fore/aft and up/down factory seat adjustment. Can I continue using my factory seat belt?Yes. The mounts are designed so they do not interfere with the OEM three-point seat belt or factory airbag hardware. Are these mounts for the lap belts or sub straps?These mounts are specifically designed to provide mounting points for the lap belt portion of a racing harness. A sub strap mounting solution is required separately when installing a harness with anti-submarine straps. Can the mounts be removed later?Yes. Because they utilize the factory seat mounting locations, the mounts can be removed without leaving drilled holes or other permanent modifications behind. Where are the CMS Performance Subaru WRX Lap Belt Mounts made?They are designed, manufactured, TIG welded, and powder coated in-house in the USA.

Shrader Performance Rear Seat Delete For Gen 5 Camaro The Shrader Performance rear seat delete for the 5th generation Chevy Camaro includes features like a fold-down rear panel for access through the trunk. Simply pop out four plastic pins and the rear panel folds down in seconds. Shrader Performance also built the support braces under the rear seat delete's lower panels to support over 100 lbs. of cargo! The lower panels can be lifted to provide access to a small out-of-sight storage space for things like small tools, a handbag, and anything else you don’t want visible. Or this space can be used to mount aftermarket components. Strong, Rigid, and Beautiful The foundation of Shrader Performance rear seat delete kits is a strong ABS plastic platform, formed for superior rigidity and strength and covered in high quality black carpet to match the factory OEM carpeting. They are the only manufacturer using this exclusive design, and all rear seat delete kits are made at their facility in North Carolina. Shrader puts sound-insulating padding on all carpeted panels as standard equipment to help subdue exterior road noise. Still, your Camaro will instantly shed about 20 lbs.! Installation is easy with the link to full instructions below. No removal of the interior side panels is needed. Simply remove your seats and a few components and install the new RSD panels. Completely reversible in minutes if you decide to put your seats back in. Shrader Performance Rear Seat Delete Fits: 2010 - 2015 Chevrolet Camaro Hardtop Coupe (not convertible) Can be easily modified to fit the CMS Performance Roll Bar for Gen 5 Camaro Installation Notes Tools required include basic metric sockets and a T50 Torx bit. Some cutting is involved to fit the rear seat delete around a CMS Performance Roll Bar, or you can choose to have your rear seat delete pre-cut to fit the CMS Performance Roll Bar. Click here for basic installation instructions