Vehicle Gear

Sparco EVO QRT Performance Racing Seats 2028 Expiry The Performance version of the Evo brings the famous Sparco Seat to the top with leather and alcantara upholstery.  Looks as good on the street as on the track.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved The  Sparco EVO QRT Racing Seat DIMENSIONS EVO S Dimensions:     EVO Std Dimensions: EVO L / XL Dimensions:

< Sparco QRT-R Racing Seat Water-Proof Off-Road UTV The Sparco QRT-R XNR seat is the perfect choice for all UTV and OFF-Road applications were you need a strong and light racing seat that is also water-proof to keep you dry and driving all day at peak speed.  The Sparco QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat. The Sparco QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The Sparco QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The Sparco QRT-R is FIA approved. Available in cloth. REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING Sparco QRT-R Racing Seat Technology Lightest "Medium/Large" size fiberglass seat on the market Lower seating position that can fit taller/larger drivers Smaller outer dimensions for small vehicle fitment QRT Technology gives an average weight savings of 7lbs per shell FIA approved Sparco QRT-R Racing Seat Dimensions

Sparco EVO QRT Off-Road Racing Seats Designed for off-road and UTV market applications where you need a seat that looks great, is light, strong, and water-proof, the Evo X features Sparco's exclusive waterproof fabric covering the popular Evo L QRT seat shell.  The compact size of the Evo works perfectly for a UTV application.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With UTV's and Off-road vehicles in mind, the Sparco Evo QRT is sure be a mainstay out in the wild! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in water-proof materials. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat Sizing The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat Technology QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 3 Sizes: Standard through XL Excellent ergonomics Fire retardant fabric Special water-proof non-slip fabric FIA approved Sparco EVO QRT Off-Road Racing Seat Dimensions   EVO Std Dimensions: EVO L / XL Dimensions:

Sparco ULTRA Racing Seat The Sparco Ultra seat is the lightest FIA 8859-1999 seat in the Sparco range at only 11.4lbs. It is constructed with light weight QRT Technology.  The Sparco Ultra seat is revolutionary because it was designed to be used without a cover or padding to minimize weight and maximize performance. This allows for a lower seating position and also better feedback from the chassis of your race car. The Sparco Ultra shell has both form and function. It has an extremely comfortable shape that is contoured for the body with the perfect amount of recline and lumbar support. The Sparco Ultra race seat was designed to fit into very narrow cockpits but still offer sizing that fits a standard to large size driver. The Sparco Ultra is FIA 8859-1999 approved.  WHAT IS QRT?Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies.QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.Sparco Ultra Race Seat SizingMedium / Large (up to 36” waist) Sparco Ultra Race Seat  - TechnologyUltralight light weight QRT Technology shellExcellent fitment into small narrow vehicle cockpitsExcellent ergonomicsLower Seating positionFIA 8859-1999 approved   Sparco Ultra Race Seat - Dimensions

Recaro Expert S and Expert M Seat The Seat Customization Specialists! If flexibility is at the top of your list, look no further than the Recaro Expert seat! The modular design of the Recaro Expert adapts to different body sizes. It’s available with "S" and/or "M" seat cushions that differ in the length of the seating surface as well as the height and contours of the side bolsters. Shorter drivers will find that the short seat cushion and flat side bolsters in the "S" version make getting in and out a breeze. While average-height drivers will appreciate the added support of the "M" seat cushion. Adjustable backrest side bolsters come as standard, rounding off the Recaro Expert's perfect body support. Feel your driving performance soar! Look Great . . . Feel Great! In comfort and performance, Recaro Expert seats are a giant leap ahead of standard automotive seats. And no other manufacturer can rival the quality and handmade craftsmanship of real Recaro seats. Best of all, the Expert seats -- like all Recaro seats -- have their proprietary and world-renowned ergonomic technology built in. The result is seats in your car that look great, feel great, are kind to your body, and leave you feeling refreshed after a long drive. The Recaro Expert seat can be upholstered either in Recaro's proprietary Nardo fabric, premium Ambla vinyl, or supple Italian leather. The Expert M also features an exclusive black leather / Pepita fabric upholstery option that draws inspiration from classic Porsches! Recaro Expert SEAT Features and Attributes Recaro proprietary ergonomics: S-shaped backrest designed to align the spinal column in its most natural and healthy position Recaro’s proprietary integrated lumbar support technology provides superior comfort and support Independently adjustable back bolsters can be set to perfectly cradle your body and hold it in the correct seating position for high-performance driving The seat cushion’s thigh bolsters give support for spirited driving without hindering easy vehicle entry Backrest is easily adjustable with a manual dial for millimeter precision Seat-back tilt-forward release and recline adjustment on both sides – same seat works for driver and front passenger sides The headrest can be adjusted to comfortably support your head and neck – up, down, and forward tilting RECARO EXPERT SEAT SPECIFICATIONS Weight: Approximately 16 kg / 35.3 lbs. Max Height: 82.0 cm / 32.3 in. Materials: High-quality glass fiber-reinforced plastic, with a side of comfort. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. RECARO EXPERT SEAT FAQs Q: Will it fit in my car? A: With its slim, ergonomic design, it's likely this seat was made for your car. But let's chat specifics to be sure. Q: Is it comfortable for daily driving? A: Comfort and performance are the hallmarks of the Recaro Expert. A more relaxed Recaro sport seat with everyday comfort and performance very much a priority. Q: Can I install it myself? A: If you can handle a wrench, you can handle this. But when in doubt, professional installation is never a bad idea.

RECARO SPORTSTER GT SEAT Refined Elegance Matched With High Performance The Recaro Sportster GT seat is based on our racing-inspired Sportster CS model, with unique design features and fabrics that will complement the styling of high-end sports cars and sports sedans. It combines the features of a sports seat and the light-weight shell of a racing seat. The innovative, reinforced polymer-based backrest provides good comfort along with optimum body support with its pronounced side bolsters and excellent shoulder support. After a long drive, your body is relaxed and you feel refreshed. After all, you have been riding in Recaro seats with comfort and ergonomic qualities reminiscent of the world’s top sport-luxury automobiles. The Recaro Sportster GT comes in a variety of upholstery finishes and colors, from Recaro's exclusive Nardo cloth to premium vinyl with colored suede insert, to the ultimate leather with carbon weave insert. The Sportster GT can also be had either with or without a sub-strap hole in the bottom seat cushion to accommodate a five-point racing harness. Recaro Seat Sliders for the Sportster GT can be found here. RECARO SPORTSTER GT SEAT FEATURES AND ATTRIBUTES Exclusive, sporty seat design, feel and performance Recaro’s proprietary integrated lumbar support technology provides superior comfort and support. Recaro’s proprietary pronounced side support at thigh, thorax and shoulder area to fix the driver’s body in a safe position. Metal seat base with reinforced polymer backrest. Can accommodate three-, four, or five-point harnesses (depending on the version). Shoulder, back and thigh bolsters designed to hold you in a correct seating position for high performance driving Backrest easily adjustable with a manual dial for millimeter precision Ultra-thin backrest provides superior ergonomics, unique styling, interior space savings, and lighter weight Ingenious integrated side-mounts provide easy attachment to other vehicle installation hardware Flame-retardant materials RECARO SPORTSTER GT SPECIFICATIONS Weight: Approximately 15.0 kg / 33.0 lbs. Max Height: 91.8 cm / 36.2 in. Materials: High-quality glass fiber-reinforced plastic, with a side of comfort. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. RECARO SPORTSTER GT FAQs Q: Will it fit in my car? A: With its slim, ergonomic design, it's likely this seat was made for your car. But let's chat specifics to be sure. Q: Is it comfortable for daily driving? A: Comfortable and stylish, it's like the luxury sport-sedan of racing seats. Q: Can I install it myself? A: If you can handle a wrench, you can handle this. But when in doubt, professional installation is never a bad idea. RECARO SPORTSTER GT MATERIALS

Recaro Profi SPG Racing Seat All race drivers want to win. That’s the goal. And winning starts with how you fit in the car and relate ergonomically to its controls. The Recaro Profi SPG racing seat provides optimized body support during high g-force events, keeping you firmly in the right place to do your job. The Recaro Profi SPG also gives you great long term comfort, and it is this combination of comfort and support that gives you a competitive edge in driving performance. The Recaro Profi SPG’s ergonomic S-shaped fiberglass shell fits the natural curve of your spine, providing “built-in” structured lumbar support that protects against spinal compression in high-impact accidents. Ideal for off-road and rally use, the shell of the Recaro Profi SPG with glass fiber reinforced polymer has been proven many times over and offer superb lateral hold on the race track as well as off-road. Also available in XL version. Uses these Recaro side mounts. Recaro Profi SPG Racing Seat Details Manufacturer: Recaro Homologation: FIA 8855-1999 certified and crash tested Proprietary ergonomics: S-shaped shell with “built-in” lumbar support Shell: Recaro high-integrity fiberglass Upholstery: flame-retardant material Aggressive thigh and torso bolstering Lumbar cushions Premium, durable shock-absorbing foam throughout Recaro friction grip at shoulders Screw-mounted panels at belt slots Suitable for a 4, 5, or 6-point harness Recaro Profi SPG Racing Seat Dimensions

Girodisc A2-307 Rear Rotors for Toyota Supra GR Fitment: Toyota Supra GR (345mm) This Girodisc two-piece rotor set is a direct replacement for the Rear rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the Rear axle of the Toyota Supra GR, while being far more durable in track use. American Made With Specially Formulated Materials Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D2-307) when the latter need to be replaced. All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware. We also recommend replacing them if a crack leads to the edge of the ring. Sold and priced per pair.  If you would like help choosing rear pads, give us a call at (844) 438-7244.

Girodisc A1-307 Front Rotors for Toyota Supra GR Fitment: Toyota Supra GR (348mm) This Girodisc two-piece rotor set is a direct replacement for the front rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the front axle of the Toyota Supra GR, while being far more durable in track use. American Made With Specially Formulated Materials Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D1-307) when the latter need to be replaced. All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware. We also recommend replacing them if a crack leads to the edge of the ring. Sold and priced per pair.  If you would like help choosing rear pads, give us a call at (844) 438-7244.

Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Corvette C8 The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

A1-242 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Corvette Z51 (C8), Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Sparco Circuit / Circuit II QRT Racing Seat    The Sparco Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramadic fiber-reinforced fiberglass with all-new QRT technology, the Sparco Circuit QRT has an ultra-light shell. The Sparco Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit QRT is FIA approved and available in two sizes: Circuit QRT (Standard) and Circuit II QRT (Large). SPARCO QRT TECHNOLOGY QRT technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach weight of carbon fiber seat at the price of a fiberglass composite seat. Sparco Circuit QRT Race Seat Technology QRT technology – 30% weight savings Ultra-light Aramadic fiber-reinforced fiberglass shell Integrated head bolsters for greater safety HANS device compatible Fire retardant fabric FIA approved The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. Sparco Circuit QRT Fiberglass Racing Seat Details Manufacturer: SparcoManufacturer part number: 008019RNRRating: FIA 8855-1999Mounting: SideWeight: Shell Only: 19.73lbsHans CompatibleUltra-light Aramaic fiber-reinforced fiberglass shellIntegrated head protectionNo-slip fabric for shoulders and bottom cushionSmooth and slim backrest for high lateral supportPre-shaped thigh cushion helps separate the driver's legsSelf-extinguishing fabric   Sparco Circuit QRT Race Seat Dimensions

RECARO SPECIALIST S AND SPECIALIST M SEAT The Seat Customization Specialists! The entry model in the Recaro comfort seat range, the Recaro Specialist meets all of Recaro's incredibly exacting requirements for quality, style, and performance. Just like the Recaro Expert seat, the Specialist comes in two seat cushion versions ("S" or "M") that vary in both the length of the seating surface and the height and contours of the side bolsters. Shorter drivers will love the “S” version, while drivers of average height will likely prefer the "M" version. Eye-Catching Recaro Design With Recaro Specialist seats in your car, you achieve a distinctive and stylish interior look while greatly enhancing comfort and performance compared with standard automotive seats. The Recaro Specialist provides world-renowned Recaro ergonomics, holding you comfortably in place during spirited driving. And every Recaro Specialist seat is hand made by meticulous Recaro Automotive craftsmen who deliver unmatched quality and extraordinary workmanship. The Recaro Specialist seat can be upholstered either in Recaro's proprietary Nardo fabric, premium Ambla vinyl, or supple Italian leather. Recaro Specialist Features and Attributes: Recaro proprietary ergonomics: S-shaped backrest designed to align the spinal column in its most natural and healthy position Recaro’s proprietary integrated lumbar support technology provides superior comfort and support Recaro’s proprietary pronounced side support at thigh, body and shoulder area to fix the driver’s body in a safe position Backrest is easily adjustable with a manual dial Seat back tilt-forward release and recline adjustment on both sides – same seat works for driver and front passenger sides The headrest can be adjusted to comfortably support your head and neck – up, down, and forward tilting Optional covered or black molded foam armrests RECARO SPECIALIST SEAT SPECIFICATIONS Weight: Approximately 16 kg / 35 lbs. Max Height: 83.0 cm / 32.7 in. Materials: High-quality glass fiber-reinforced plastic, with a side of comfort. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. RECARO SPECIALIST SEAT FAQs Q: Will it fit in my car? A: With its slim, ergonomic design, it's likely this seat was made for your car. But let's chat specifics to be sure. Q: Is it comfortable for daily driving? A: Comfort and performance are the hallmarks of the Recaro Specialist. A more relaxed Recaro sport seat with everyday comfort and performance very much a priority. Q: Can I install it myself? A: If you can handle a wrench, you can handle this. But when in doubt, professional installation is never a bad idea. RECARO SPECIALIST SEAT MATERIALS

RECARO SPEED SPORT SEAT Pure Sports Seat, Customized! Experience control that you can feel! The RECARO Speed is everything a sports seat should be to encourage a pure, dynamic driving experience. And with a huge range of upholstery materials to choose from, you can customize it to your heart’s content. By the way, if you’re a soccer fan, you already know that the RECARO Speed is the world’s most popular dugout seat for coach benches, right? The RECARO Speed seat was inspired by Recaro's world-class racing shells, and is designed for the rigors of high-performance driving. When you sit in a RECARO Speed seat, you can feel the difference that superior engineering and ergonomics can make. The entire seat is lined with thick, dense, high-quality foam that keeps you firmly in place and ensures long lasting support and comfort.  The RECARO Speed is the perfect combination of comfortable sports seat and pure racing shell. The innovative lightweight shell boasts an exclusive slim design, plus outstanding lateral and shoulder support. The Recaro Speed features highly fire-resistant upholstery1 in Recaro's proprietary black Nardo fabric with colored logo options, or their premium Ambla vinyl with Saturn Black insert.The Recaro Speed is suitable for use with either 3- or 4-point belts. With the optional bottom cushion with sub-strap hole, the Recaro Speed can accommodate a 5- or 6-point harness. Recaro Speed Features and Attributes: RECARO proprietary ergonomics: S-shaped backrest designed to align the spinal column in its most natural and healthy position RECARO’s proprietary integrated lumbar support technology provides superior comfort and support Look and feel of a racing seat, with comfort for everyday driving Pronounced seat cushion and backrest bolsters provide firm lateral hold Shoulder, back and thigh bolsters designed to hold you in a correct seating position for high performance driving Backrest easily adjustable with a manual dial for millimeter precision Integrated headrest and belt pass-through openings Seat back tilt-forward release and recline adjustment on both sides, so the same seat works for driver and front passenger sides Optional sub-strap hole in Speed (SPD) cushion for 5- or 6-point harness Specifications That Matter: Weight: Approximately 14.5 kg / 31.0 lbs. Max Height: 82.0 cm / 32.5 in. Materials: High-quality glass fiber-reinforced plastic. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. 1 The Recaro Cross Sportster CS is not FIA or SFI approved for use in competition.