Club Benefits

Paragon O-Ring Pack The Paragon O-Ring Pack contains six new O-rings to replace a dry, cracked, or torn O-ring on any Paragon male connector.

Paragon Viking 12V Cooler Paragon’s Viking Cooler was designed to be your ultimate companion for beating the heat! The Viking Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing you to easily disconnect with a quick pull on the connected hose set. The Paragon Viking Cooler is available in either 12L or 18L capacity and works seamlessly with most cooling garment brands.  The Paragon Viking Cooler is designed for those racing applications that have space for a fixed-mounted cooler for longer races. Perfect for road racing, circle track, drags and many other racing types, it's a favorite among NASA, SCCA, and PCA drivers! The Viking Cooler keeps you cool and alert so you feel your best in the waning laps of a race, when heat is a big factor in fatigue and loss of focus. Plus, you can stay cool waiting in the pits or on the grid. Paragon Viking Cooler Dimensions 12 Liter: 7 lbs, 16" x 10" x 12" 18 Liter: 9 lbs, 17" x 11" x 14"

Schroth Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make The Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. Schroth Formula 2x2 Racing Harness Details Manufacturer: Schroth Manufacturer part no.: SR 94620 FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved

Pagid Racing Brake Pad Shape 4934 Pagid 4934 Brake Pad Fitment Guide Make Model Build (Year) Front Rear BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X BMW M5 [F10] 11 - 16 X BMW M6 [F13] 12 - 18 X BMW M3 [F80] [ceramic brakes] 14-18 X Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.

Forgeline Motorsport Series Shelby GT350/GT350R 19" Track Package The Best Way To Buy Forgeline Wheels For Your Shelby GT350 & GT350R We've sold hundreds of Forgeline Motorsport Series Wheels to our Shelby GT350 and GT350R customers wanting to hit the race track. As a result, we know a thing or two about the right offsets, wheel sizes, brake and fender clearance, etc., for the awesome S550 Shelby GT350 and GT350R. We've boiled that experience down to create this straightforward Forgeline Wheels Track Package, taking all the guesswork out of getting a set of Forgeline wheels for your Shelby. Simply choose your offset preference, select your color, and we'll get your Forgeline wheels rolling.1 It really is that easy. We spec all of our Forgeline Motorsport Series wheels with knurled beads to prevent tires slipping around the wheels under heavy braking. (Tires get hot at the track. It happens!) What's Included in the Shelby GT350/GT350R Track Package The Competition Motorsport Forgeline Track Package starts with two front and two rear 19x11 Forgeline Motorsport Series racing wheels with knurled beads, finished in any Standard color. You can choose whether you want staggered front and rear offsets (similar to the OEM wheels), or a "square" set-up, popular with racers, where all four wheels are the same offset. The square set-up includes bolt-on 25mm spacers for the front, allowing you to swap your new Forgeline Wheels front-to-back to maximize tire longevity. Forgeline Wheels GS1R Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline Wheels GS1R is the product of the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport-engineered design, and I-beamed spokes. This wheel is engineered to withstand the rigors of top-level endurance racing with a 2,100 lbs. street tire load rating and exceptional deflection stiffness. Machined from a single forging of 6061-T6 aluminum, the GS1R employs an open-lug center area for additional weight reduction and improved access to the lugs. In combination with a new chamfered outer lip (with fewer sharp edges for easier handling), this enables faster wheel changes and, depending on size and offset, can save an additional pound of mass from each wheel! Forgeline GTD1 5-Lug The Forgeline Wheels GTD1 5-Lug racing wheel is a 10-spoke five-lug derivative of Forgeline's race-winning GTD1 center-lock wheel. The Forgeline GTD1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and channelled spoke spans. This wheel is engineered to withstand the rigors of top-level endurance racing, delivering uncompromising strength and exceptional deflection stiffness. Made from the same forgings and similar in design to the centerlock GTD1 racing wheel, the GTD1 5-Lug wheel has been re-engineered with 10 spokes and an open lug center to reduce mass and enable easy access to the lug nuts. Forgeline Wheels VX1R If you like the look of the popular VX1 but need a load rating suitable for dedicated track duty, then the Forgeline Motorsport Series VX1R racing wheel was engineered for you! The VX1R is a full track-ready competition wheel equal in strength to our famous GA1R and GS1R Competition Series wheels. The VX1R features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and chamfered outer edge. The Forgeline VX1R is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the VX1R is engineered to allow plenty of room for caliper clearance and extreme brake fitment. And the one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength. Forgeline Wheels Offer A Dazzling Array Of Fantastic Finishes Your Forgeline Wheels Track Package can be finished in any of a wide array of colors, machined finishes, and tinted clear-coats. Powder coated for extraordinary durability, Forgeline Wheels on your Shelby GT350 or GT350R will look as good as they perform. Any standard finish is included in your Track Package, or you can upgrade to a dazzling premium finish! Notes... 1 Forgeline Motorsport Series wheels are custom made-to-order with lead times of three to five weeks.

Chillout Systems Dual Voltage AC Power Supply Shock-resistant external AC power supply enables cooling outside of your vehicle. This power adapter plugs into the wall and supports 110-220 volts.

PORSCHE 981 BOXSTER S/CAYMAN S FRONT CALIPER REBUILD KIT Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.)  This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition. One kit is required per caliper (we suggest doing them both as long as you're doing it).  Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds.  The shields and seals are available as a kit for convenience (and a bit of savings). We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously.  Any questions give us a call, we're happy to help!

Girodisc A1-186 Two-Piece Floating Front Racing Brake Rotors Girodisc Rotors to Replace the Front Rotors on the Following Cars: BMW F80 M3 with blue calipers, Front BMW F82 M4 with blue calipers, Front BMW F87 M2 with blue calipers, Front Upgrade Your BMW F8x To The Best Racing Rotors Available If you have a BMW M2, M3, or M4 with blue calipers and iron rotors, this Girodisc floating iron rotor system is a direct replacement for your BMW ;front rotors. No modifications to your car are necessary. The 380mm diameter rotors will bolt directly to your BMW and work with the original blue calipers perfectly. By upgrading your BMW brakes with lightweight high-performance replacements, your factory bias is maintained as well as your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

D1-147 Girodisc  Corvette C7 Z06 Front Replacement Rings The Girodisc D1-147 Front Replacement Rings are designed for use with the A1-319 Girodisc front rotor kits for the 2023+ Chevrolet Corvette C8 Z06. These replacement rings allow you to reuse your existing Girodisc aluminum hats, lowering long-term brake costs while maintaining the same high level of performance. Vehicle Fitment Chevrolet Corvette C8 Z06 (without Z07 carbon ceramic brake package) Chevrolet Corvette C7 Z06 & Grand Sport For use with Girodisc front rotor kits using a 370mm rotor ring Rings and hardware only – designed exclusively for Girodisc hats Serviceable Two-Piece Design These rings are machined from Girodisc’s proprietary high-carbon iron casting and feature 72 curved vanes that act as a centrifugal pump to maximize cooling efficiency. Each set includes new floating hardware to restore proper rotor float during service. Replacing only the rings keeps consumable costs down while retaining full braking performance. Features Replacement rings only; reuse your A1-319 Girodisc aluminum hats High-carbon iron with 72 curved vanes for superior airflow and cooling Includes new floating hardware for a complete refresh Designed exclusively for Girodisc hats Minimum recommended ring thickness: 32 mm D1-147 Girodisc Front Replacement Rings FAQs: Do these include hats? No. These are rings only and must be installed on existing A1-319 Girodisc aluminum hats. Can I use these with OEM rotors? No. They are designed exclusively for Girodisc rotor kits. Do they come with new hardware? Yes. All replacement rings include new floating hardware. When should the rings be replaced? Replace them when the thickness reaches 32 mm or if cracks propagate to the outer edge under inspection. Are they directional? Yes. Each ring is side-specific, with directional curved vanes for optimal cooling.

Girodisc 2-Piece Front Brake Rotors | Camaro ZL1 (Gen 6) The Girodisc 2-piece front rotors are the ultimate performance upgrade for the sixth-generation Camaro ZL1. Designed as a direct replacement for the factory discs, they deliver improved cooling efficiency, lower weight, and better pedal consistency under hard braking. A shorter 66 mm annulus design trims unnecessary mass without sacrificing pad coverage, cutting rotor weight to just 28 lbs per side while still offering maximum durability for street and track use. Advanced Engineering for a Better-Balanced ZL1 Chevrolet’s stock pillar-vane rotors are heavy and prone to heat soak, tipping the scales at 32.5 lbs each. Girodisc’s re-engineered system replaces them with a 72-vane directional design that acts as a centrifugal air pump, actively drawing cooling air through the rotor for consistent thermal control. The hat section is precision-machined from 6061-T6 aircraft-grade aluminum, and the iron rings are cast in-house from Girodisc’s proprietary high-carbon alloy. The result: quicker heat recovery, sharper response, and reduced fade lap after lap. A1-211 Vehicle Fitment Chevrolet Camaro ZL1 (Gen 6, 2017-present) Also compatible with other GM 6-piston caliper platforms using a 66 mm pad annulus Girodisc A1-211 Features Direct OEM Replacement: Bolts directly to factory calipers and hubs – no modifications required. Reduced Weight: 28 lb assembly saves 4.5 lbs per corner versus OEM rotors for faster suspension response. 72-Vane Curved Design: Directional internal vanes deliver superior airflow and thermal balance. Floating Mount System: Twelve high-strength steel pins with anti-noise washers allow expansion without vibration. Replaceable Rings: Reuse the anodized aluminum hats – simply swap the iron rings when worn. Made in the USA: Every rotor is designed, cast, and machined at Girodisc’s Bellingham WA facility. FAQs – Camaro ZL1 (Gen 6) Front Rotors Do I need a different brake pad? Yes – use a pad with a 66 mm or smaller annulus to match the revised rotor surface area. Will these fit my stock Brembo calipers? Absolutely. They bolt directly to the factory 6-piston Brembo setup with no adapters. How do they compare to OEM rotors? They’re lighter, run cooler, and recover faster between corners, preventing the fade common with heavy pillar-vane designs. Are they track-ready? Yes – these rotors are engineered for serious track use while remaining perfectly civil for street driving. Upgrade your Camaro ZL1’s braking performance with Girodisc’s lightweight floating front rotors. With superior airflow, reduced weight, and race-bred durability, they keep your brakes cool and consistent whether you’re carving corners or chasing lap times.

Performance Friction PFC Brake Pads 0278.XX.17.44  Fits the Following Vehicles: Make Model Years Front Rear BMW E30: 316i, 318is, 320i, 323i, 324i, 324d, 325e, 325i (not M3) 1985 - 1992    X The PFC 0278 brake pad is available in both the 08 and 11 compounds. The 08  (endurance) compound is most popular in endurance applications such as ChampCar in an 8 hour race. The 11 (sprint) compound has dominated the NASA Spec E30 podiums since it's inception.   Performance Friction PFC 0278.XX.17.44 Details Manufacturer: Performance Friction (PFC) Manufacturer part number 08 Compound: 0278.08.17.44 Manufacturer part number 11 compound: 0278.11.17.44 Thickness of backing plate and pad material: 17mm PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.

The Full-Size Color TFT Dash For Road Use The AiM Sports MXP Strada is a 6" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS09 Module. Integrated LED Shift Light Array Choose from a host of advanced multicolored RGB shift light patterns that can be customized as you like, and for each unique gear when required. Input and Output Flexibility AiM systems acquire data from the ECU of your vehicle.The list of available ECU drivers, constantly updated and upgraded, includes 1,000 + different ECUs, either Stock and Racing; they are sorted by manufacturer/vehicle model: for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, AiM systems manage the following data lines: CAN, RS232 and K-Line. Analog/digital inputs AiM systems analog inputs are recorded up to 1,000 times per second each. You can connect and monitor all kinds of sensors, like: Ratiometric potentiometers Pressure sensors Thermo-resistors K-type thermocouples ... and many others, all your custom sensors included. Freely Configurable Display Pages You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two pushbuttons. High Contrast Color TFT Display A high contrast TFT display identifies MXP Strada at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Flexible Alarms and Custom Street Icons MXP Strada, in its standard version, features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. AiM MXP Digital Inputs Speed signals From the ECU, from the GPS and from the wheel sensors. RPM From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil. Lap signal Lap and split times are sampled by the GPS or via optical receiver/transmitter. Camera Inputs Including Rearview Mirror Camera Two analog camera inputs are available, to swap your display into a mirror camera,through pushbutton command or event management. Digital Output MXP Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run externalsystems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certainevent happens. Race Studio 3 Analysis Software MXP 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. AiM MXP 1.3 Strada Details 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Weight 2.1 lbs (950g) Waterproof IP65 AiM MXP 1.3 Strada Kit MXP 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.

Schuberth SP1 Rear Spoiler The rear helmet spoiler is designed for drivers racing open cockpit vehicles. Attached using double sided adhesive tape, the rear spoiler increases stability by providing slight downforce.       

TPMS Sensors for Chevy C8 Corvette In the Additional Notes box of your shopping cart, please indicate the year, make, and model of your car to avoid any confusion as to which sensors you need. 433 MHz TPMS sensors, set of four for Chevrolet C8 Corvette. Available with Silver, Black, or Chrome valve stems and caps. Pro tip: always have your tire installer test new TPMS sensors before installing them in your wheels to ensure they are working properly.

AP Racing Radi-CAL R3 Racing Brake Fluid Designed for the Top Levels of Motorsports AP Radi-CAL R3 Racing Brake Fluid was developed for use in very-high-temperature racing conditions. It conforms to or exceeds FMVSS 116, DOT 4, SAE J1703 and J1704 standards. AP Racing Radi-CAL R3 Racing Brake Fluid is one of the most popular brake fluids at the highest levels of professional auto and motorcycle racing. It was specifically developed for coping with extraordinary temperatures, such as those encountered when running a carbon/carbon composite brake system. To ensure that the fluid stays fresh, AP brake fluids are furnished in 500 ml (16.9 oz) easy-pour plastic bottles with double-sealed caps. When switching your fluid to AP Racing Radi-CAL R3, we recommend purging all of the old fluid from the system. Three to four bottles of fluid are enough to completely replace existing brake fluid and still have enough left over for a bleed at the track to remove any remaining air bubbles. AP Racing Radi-CAL R3 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP5660 UPC: 48238040081 DOT Rating: DOT 4 Dry Boiling Point: 617º F / 325º C Wet Boiling Point: 383º F / 195º C Compatible with other DOT 4 fluids: yes Bottle size: 500 ml (16.9 fl oz)