Club Benefits

Bell MAG-10 Carbon Fiber Helmet The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing. Carbon Performance with Open-Face Visibility The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions. Bell MAG-10 Carbon Fiber Helmet Details Manufacturer: Bell Racing Helmets Construction: lightweight carbon fiber shell Orientation: open-face with long clear visor Homologation: FIA 8859-2024 and Snell SA2025 Hardware: factory-installed M6 HNR terminals Comms/Hydration: routing-ready (components optional) Finish: gloss carbon Bell MAG-10 Carbon Fiber Helmet Features Open-face carbon design for low weight and wide, unobstructed vision Multi-density, multi-piece liner for impact energy management Long clear visor with anti-fog-ready compatibility and broad coverage Ventilation paths promote airflow for heat management in closed cabins Routing-ready for radio microphone, speakers, and hydration tube (optional kits) Factory M6 terminals for head-and-neck restraint systems Interior uses fire-resistant comfort fabrics for durability and easy care Bell MAG-10 Carbon Fiber Helmet Sizing Chart Bell MAG-10 Carbon Fiber Helmet FAQs Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules. Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs. Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility. Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup. What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference. Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably. Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence.

Bell GT6 RD ULTRA-4C Carbon Helmet Pre-Order: Shipping in OCT 2026 FIA 8859-2024 and Snell SA2025 Homologation The Bell GT6 RD ULTRA-4C is a closed-cockpit performance helmet built for drivers who want ultra-light carbon construction with integrated communications and hydration capability out of the box. A wide eye port, refined aerodynamics, and efficient ventilation keep vision clear and fatigue low through long stints. The GT6 RD ULTRA-4C features the same modern and aggressive design as the HP6 RD-4C revised for racers in closed-car environments, featuring a wide eyeport for extended vision and a lightweight premium carbon glass shell. The closed-face GT6 RD ULTRA-4C integrates the latest technology from ZeroNoise® including advanced electronics, input for earpieces, and noise canceling microphone to assure outstanding performance, sound insulation and communication efficiency. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a four-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77, which use pure carbon/advanced aerospace layups). In this helmet, "RD-4C” means the helmet is a Carbon Composite 4-layer shell with RD (radio/drink) kit integration. Designed for GT and Closed-Cockpit Racing The RD configuration includes electronic ear cups and drink-tube routing for clean, reliable comms and hydration in noisy, high-heat cabins. Internal channels manage airflow across the crown and face, and the shell profile is tuned for stability with optional aero accessories. Bell GT6 RD ULTRA-4C Carbon Fiber SA2025 Helmet Details Manufacturer: Bell Helmets Manufacturer part no.: 123925x Construction: lightweight 4C carbon-composite shell Homologation: Snell SA2025 and FIA 8859-2024 Configuration: RD (integrated electronic ear cups and hydration routing) Interior: fire-resistant comfort liner Orientation: closed-cockpit optimized, wide eyeport Hardware: factory-installed M6 HNR terminals Finish: gloss carbon-composite Shield: clear shield installed (tinted/iridium options available separately) Bell GT6 RD ULTRA-4C Carbon Fiber SA2025 Helmet Key Features Ultra-light carbon shell for reduced fatigue and quick head-turn response Equipped with Bell Racing SmartLock Mechanism Multi-density, multi-piece liner for impact energy management Integrated channels for radio wiring and drink-tube routing Wide eye port for enhanced lateral vision in GT cars Efficient intake/extraction paths to promote airflow in warm cabins Compatible with optional top-forced-air and aero kits (rear spoiler, gurneys) Sealed eye port gasket to help reduce dust and moisture ingress Bell GT6 RD ULTRA-4C Carbon Fiber SA2025 Helmet Size Chart Bell GT6 RD ULTRA-4C SA2025 Carbon Fiber Helmet FAQs What does “RD” mean on this model?RD indicates the helmet is set up for radio communications and drink-tube routing, with electronic ear cups installed for improved audio clarity. Is this helmet optimized for closed-cockpit use?Yes. The GT6 platform is tailored for GT and closed-cockpit cars, with a wide eyeport for peripheral vision and venting tuned for in-car airflow. Can I connect a top forced-air system?Yes. The shell accepts optional top forced-air kits, allowing you to feed cooled air into the helmet for longer stints and hotter events. Are hydration and radio systems included?The RD configuration provides integrated routing and ear cups; specific drink and radio hardware is typically added to suit your team’s setup. Does it include HNR anchor points?Yes. Factory-installed M6 HNR terminals are fitted for head-and-neck restraint compatibility. Which shield options are available?A clear shield is installed. Tinted and iridium options are available separately to suit lighting conditions and driver preference. Lightweight carbon construction, integrated comms/hydration, and closed-cockpit visibility make the Bell GT6 RD ULTRA-4C a smart upgrade for serious GT drivers. Order yours from Competition Motorsport and get race-ready support.

Bell XR7 ULTRA Carbon Fiber SA2025 Racing Helmet Dual-certified carbon performance for race-day confidence The Bell XR7 ULTRA Carbon is built for serious track work: featherweight strength, crisp visibility, and cooling that actually keeps up during long sessions. With dual certification to FIA 8859-2024 and Snell SA2025, it checks the boxes for club, pro-am, and many pro-level series while keeping comfort and focus front and center. Bell XR7 ULTRA Carbon Fiber SA2025 Helmet Features Carbon fiber shell engineered for high impact energy management while minimizing weight for reduced neck fatigue on long stints Dual homologation: FIA 8859-2024 and Snell SA2025 for broad series acceptance in the U.S. and internationally Refined aerodynamics help stabilize the helmet at speed and reduce lift and turbulence in open- and closed-cockpit cars Multi-channel ventilation promotes steady airflow to manage heat and visor fog in hot, humid conditions SE07 DSAF clear shield included for durable anti-fog performance and wide, distortion-free field of view Hydration and radio ready with ports designed for clean installs and quick pit-lane connections Removable, replaceable interior padding to dial in fit and keep things fresh through the season Bell XR7 ULTRA Carbon Fiber SA2025 Helmet Size Chart Bell XR7 ULTRA Carbon Fiber FIA8859-2024/SA2025 Helmet FAQs Is the XR7 ULTRA Carbon legal for FIA events? The FIA 8859-2024 approval covers many international series; always confirm with your sanctioning body and rulebook. How does the XR7 ULTRA compare to RS7 and X7D models? XR7 targets a lightweight, dual-certified spec with race-day ventilation and stability; RS7 and X7D occupy adjacent weight/feature positions depending on series needs. Can I add hydration and comms? Yes. The shell and liner are designed for tidy hydration tube routing and radio kit integration without compromising fit. Step into the grid with a helmet that blends modern certifications, low weight, and track-proven cooling.

Bluetooth Battery Tracker PLUS Keep tabs on your vehicle's battery health like a pro with the Bluetooth Battery Tracker PLUS from Antigravity. Whether you’re managing a race car, track-day toy, or a weekend cruiser, this compact monitor connects to your battery and syncs with your smartphone to provide real-time diagnostics, historical data, and alerts—all without lifting the hood. It's the most advanced battery tracker Antigravity has ever made, and it's built for everything from 6V motorcycles to 24V RVs and trucks. One Tracker. Any Battery. Total Control. Antigravity Battery Tracker PLUS Features: Compatible with 6V, 12V, and 24V systems, including Lithium, Lead-Acid, and AGM batteries Installs in under two minutes—just connect and pair with the free app Monitors voltage in real time and performs cranking/charging system tests (for 12V/24V) Stores up to 72 days of historical battery data and allows monthly exports via spreadsheet Tracks last parked location, trip mileage, and estimated vehicle cost data Sends alerts when you're within Bluetooth range—no Wi-Fi or cellular needed Only draws 1 milliamp of power, so there’s virtually no impact on battery life Supports unlimited devices and can track up to 4 vehicles simultaneously in-app Free App with Advanced Monitoring The Antigravity app makes it incredibly easy to stay on top of your battery’s performance. Monitor real-time voltage, track historical data, and test your starting and charging systems directly from your phone. Key features include: Real-time voltage readings and State of Charge (SoC) percentage Cranking and Charging system tests (for 12V and 24V batteries) Temperature sensor near the tracker Graphs with voltage and charge data updated every two minutes for 72 days Export monthly data to spreadsheets GPS-based last parked location tracking Customizable power and cranking alerts Mileage and cost tracking with support for various currencies and fuel types Monitor and label up to 4 vehicles at once; use unlimited trackers App supports Android 4.3+ and iPhone 4S+ devices Why Use a Battery Tracker? Even if your vehicle already displays battery voltage, this tracker offers so much more: Spot parasitic draws and battery drain over time, especially during vehicle storage Get notified before your battery dies—perfect for track cars, collector cars, and fleets Review charging system performance and alternator voltage output See exactly when the car was driven or started, even when you're away Useful for racers running total loss systems to log battery performance during events Bluetooth Battery Tracker PLUS FAQs: Can I use this tracker on a motorcycle or RV? Yes! The Battery Tracker PLUS works on 6V motorcycles, 12V cars, and 24V RVs, trucks, and more. How do I install the Battery Tracker? Installation takes less than two minutes—just connect the leads to the battery terminals and pair it with your smartphone via the app. Will this drain my battery if left connected? No. It only draws 1 milliamp, which is negligible and safe for long-term use. Can I use one app to monitor multiple vehicles? Yes! The app supports tracking up to 4 vehicles at once and unlimited devices in total. Take the guesswork out of battery health. Whether you're tracking your daily driver, your track build, or your entire fleet, the Antigravity Bluetooth Battery Tracker PLUS gives you total visibility and peace of mind—right from your phone.

Antigravity Lithium Car Battery If you're tired of your heavy, sluggish OEM battery dragging down performance, the Antigravity H7/Group-94R Lithium Car Battery is your answer. This drop-in replacement delivers monster cranking power, ultra-lightweight construction, and exclusive wireless jump-starting—all packed into a direct-fit Group-94R case. Whether you're building a street beast or refining a daily driver, this battery is the weight-saving, power-packed upgrade you didn’t know you needed. Massive Power – Minimal Weight – OEM Fit Anti-Gravity Battery Features: Direct-fit H7/Group 94R case size: no modifications needed Wireless RE-START technology: jump-start at the press of a button Built-in full Battery Management System (BMS) for maximum safety Choose from 40Ah, 60Ah, or 80Ah capacities with up to ~2000 cranking amps LiFePO4 lithium iron phosphate chemistry: safer, cooler, more stable power 70% Lighter than OEM - drop up to 40 lbs! Threaded M8x1.25 terminals for secure connections Dimensions: 12.25" x 7" x 7.5" Performance Vehicles That Use H7 Size Aston Martin Audi BMW Cadillac (all ATS/CTS) Charger/Challenger (2010+) Chevy Camaro (2010+) Chevy Corvette (2013+) Lamborghini Lotus Mini Cooper Porsche Antigravity H7/Group-94R Lithium Car Battery FAQs: Does this battery fit my car if I currently have a Group-94R? Yes, it's a direct-fit replacement with OEM dimensions for seamless installation. How does the RE-START function work? If the battery is drained, press the RE-START button on the included keyfob to instantly wake the reserve power and start your car—no jumper cables needed. What's the difference between the 40Ah, 60Ah, and 80Ah versions? The capacity determines how much power is stored. 40Ah is great for most builds, while 80Ah is ideal for high-demand electronics or harsh climates. Why can’t the 80Ah version ship by air? Due to lithium shipping regulations, the larger 80Ah size must be shipped ground with adult signature required. NEW! Lightweight Lithium Batteries with Wireless Remote Built-In Jump Starting! Antigravity Batteries has changed the game again with their latest Lithium-Ion Car Batteries. The newest RE-START line of batteries offers built-in WIRELESS Jump-Starting! That means if your battery is ever discharged, simply press the button on the provided key fob, start the car, and drive away! No need for a jump starter or roadside assistance. You don’t even have to open the hood—activate it from inside your vehicle! If you want to track your battery status via Bluetooth, you can use the Bluetooth Battery Tracker PLUS (sold separately).

GiroDisc 1382 Front Racing Brake Pads  Do NOT use these pads with your OEM CCB Rotors GP10 Street/Track Compounds Dominate every lap with GiroDisc D1382 Racing Brake Pads, available in GP10 for street and track day use. Whether you're chasing podiums in HPDE or logging laps in long-distance formats, GiroDisc delivers the high-performance braking you demand. The GP10 compound offers smoother torque, excellent pad life, and low rotor wear—perfect for sessions where consistency matters most. GiroDisc 1382 Brake Pad Product Highlights GP10 compound: Long-wear endurance pad with low rotor wear and excellent pedal feel Consistent performance across wide temperature ranges for both compounds D1382 pad shape fits many high-performance brake calipers GiroDisc 1382 Brake Pad Frequently Asked Questions (FAQ) What’s the difference between the GP40 and GP10 compounds? The GP40 is a high-bite sprint racing pad for aggressive braking and short sessions. The GP10 is a smoother, longer-wearing compound ideal for street and track day use. Can I daily drive with GP10 pads? GP10 is the best compromise between street and track use.   Do I need GiroDisc rotors to use these pads? Yes, pairing these pads with GiroDisc two-piece rotors is recommended for the best results. GP10-1382 Brake Pads GP10 compound is a high-performance street pad which is designed to have a smooth bite and make minimal noise at cold temperatures. Made for us by a friction technology specialist in Japan, it can be taken on track if you truly need a pad that does it all. Please note that if your car spends more time on track than the street, we would recommend stepping up to a full race pad like our GP40.

Pagid Racing Brake Pad Shape 8081 Pagid 8081 Brake Pad Fitment Guide (FMSI D1045) Make Model Build (Year) Front Rear Aston Martin DB11 [cast iron brakes] 16 - 23 X Aston Martin Vantage [cast iron brakes] street car 18 - X Audi RS6 (C6) 08 - 10 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit 16 - X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro SS 1LE [Gen 6] (6 piston Brembo) 16 - X Chevrolet Corvette C7 Z06 [iron brakes] 15 - X Dodge Challenger HellCat & 392 15 - X Mercedes C 63 AMG [W204] 08 - 14 X Mercedes CLK 63 AMG Black Series 06 - 09 X Nissan R35 GTR 08 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound Pagid RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

OMP ONE-S Racing Gloves The OMP ONE-S Racing Gloves combine lightweight construction, dependable steering-wheel grip, and a comfortable pre-curved fit for competitive auto racing. Updated graphics give the ONE-S a modern appearance, while its external seams and ergonomically positioned silicone grip inserts provide the control and comfort drivers need during demanding track sessions. Certified to the FIA 8856-2018 homologation standard, the OMP ONE-S features an extended fire-resistant cuff, a strapless elastic wrist, and a diagonal gauntlet opening designed to reduce interference with the sleeve of a compatible racing suit. Ergonomic Silicone Palm Grip Thin silicone rubber inserts are printed directly onto the palm to provide dependable grip and steering-wheel sensitivity. The grip pattern is strategically positioned to improve control while reducing excess material and bunching inside the hand. The low-profile silicone construction allows the driver to maintain steering feedback while using less gripping pressure during cornering, braking, and rapid steering inputs. Pre-Curved Racing Fit The OMP ONE-S uses a pre-curved design that follows the natural shape of the hand around the steering wheel. This construction helps reduce resistance through the fingers and provides a more natural driving position. The ergonomic fit improves dexterity when operating paddle shifters, steering-wheel buttons, switches, and other cockpit controls. External Seams for Improved Comfort External stitching moves bulky seams away from the inside of the fingers. This creates a smoother interior surface and helps reduce pressure points while gripping the steering wheel. The external-seam construction also improves steering feel and comfort during extended racing sessions. Diagonal-Cut Gauntlet The extended gauntlet features a diagonal opening designed to provide dependable coverage without restricting wrist movement. Its angled shape helps reduce interference between the glove cuff and racing-suit sleeve. The extended cuff length also provides additional protection against fire and heat in accordance with the FIA 8856-2018 homologation requirements. Strapless Elastic Wrist An elastic wrist band holds the glove securely in place without requiring a separate closure strap. This streamlined design makes the gloves easy to put on and remove while maintaining a close, comfortable fit around the wrist. Fire-Resistant Interior Construction The OMP ONE-S is constructed with fire-resistant materials for certified motorsport protection. The interior is treated with latex to improve resistance and help the glove remain securely positioned during use. FIA 8856-2018 Homologated The OMP ONE-S Racing Gloves are homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes them suitable for many professional, amateur, club-level, endurance, rally, and road-racing applications. Drivers should confirm the required certification with their racing organization or sanctioning body before competition. OMP ONE-S Racing Glove Features Lightweight fire-resistant racing glove construction FIA 8856-2018 homologated Pre-curved design follows the natural shape of the hand External seams reduce interior pressure points Thin silicone rubber palm inserts provide grip and sensitivity Ergonomically positioned grip sections help reduce bunching Diagonal-cut gauntlet improves wrist and sleeve clearance Extended cuff provides additional fire and heat protection Strapless elastic wrist provides a secure fit Latex-treated interior improves grip and resistance Updated OMP graphics Ideal for Multiple Motorsport Applications The OMP ONE-S Racing Gloves are suitable for a wide range of competitive and performance-driving applications, including: Circuit racing Endurance racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction High-performance track driving Why Choose OMP ONE-S Racing Gloves? The OMP ONE-S provides a strong balance of certified protection, steering-wheel grip, comfort, and sensitivity. Its silicone palm inserts improve control, while the pre-curved shape and external seams create a close, responsive fit. The diagonal gauntlet and strapless elastic wrist further improve comfort and ease of use, making the ONE-S a dependable option for sprint races, endurance events, and extended track sessions. OMP ONE-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP ONE-S Racing Gloves FIA approved?Yes. The OMP ONE-S is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. What type of grip material is used on the palm?The palm features thin silicone rubber inserts printed directly onto the glove to provide steering-wheel grip and sensitivity. Why are the seams on the outside of the glove?External seams move bulky stitching away from the inside of the fingers, helping reduce pressure points and improve comfort. What is the benefit of the pre-curved design?The pre-curved construction follows the natural shape of the hand around the steering wheel, improving comfort and reducing finger fatigue. Does the OMP ONE-S use a wrist strap?No. The glove uses a strapless elastic wrist band to provide a secure fit and easy entry and removal. What is the purpose of the diagonal-cut gauntlet?The diagonal cuff provides coverage while reducing interference with the wrist and racing-suit sleeve. Are the palm inserts bulky?No. The silicone inserts are thin and strategically positioned to improve grip while reducing bunching and excess material. Are the OMP ONE-S Gloves suitable for endurance racing?Yes. Their external seams, pre-curved fit, lightweight construction, and silicone grip make them suitable for extended driving sessions. How should OMP ONE-S Racing Gloves fit?They should fit closely around the hand and fingers without restricting movement or creating uncomfortable pressure at the fingertips.

Sparco Prime Extreme Racing Shoes The Sparco Prime Extreme Racing Shoes are premium motorsport shoes designed for drivers who demand lightweight performance, advanced safety, and precise pedal feel. Made in Italy, the Prime Evo combines high-end materials, FIA and SFI approval, and professional-level construction for serious racing and track use. Built with an ultra-lightweight fabric upper, breathable viscose blend lining, flexible carbon fiber insole, and oil and hydrocarbon resistant rubber sole, the Sparco Prime Evo delivers the comfort, protection, and control needed inside the cockpit. These shoes are designed for both professional and amateur drivers who want dependable performance without sacrificing comfort. Sparco Prime Extreme Racing Shoe Features FIA 8856-2018 approved for motorsport competition use. SFI 3.3/5 homologated for additional racing safety compliance. Designed and manufactured entirely in Italy. Printable ultra-lightweight fabric upper for reduced weight and premium style. Breathable fresh viscose blend lining helps keep feet cool and dry. Ultra-lightweight external lacing system provides a secure and low-profile fit. Oil and hydrocarbon resistant rubber sole designed for racing environments. Rear spoiler sole design improves grip and control. Flexible carbon fiber insole enhances pedal sensitivity and driver feedback. Expanded foam protection insert on the side toe improves lateral impact protection. Transparent silicone toe reinforcement adds durability and protection. Optional carbon fiber heel counter customization available on request. FIA and SFI Approved Racing Footwear The Sparco Prime Extreme Racing Shoes are approved to FIA 8856-2018 and SFI 3.3/5 standards, making them suitable for a wide range of racing and competition environments. These certifications help ensure the shoes meet strict motorsport requirements for safety, performance, and fire-resistant protection. Made in Italy Performance Designed and manufactured entirely in Italy, the Prime Evo reflects Sparco’s focus on motorsport craftsmanship, advanced materials, and driver-focused design. The result is a professional racing shoe that feels lightweight, precise, and refined in the cockpit. Ultra-Lightweight Fabric Upper The printable ultra-lightweight fabric upper helps reduce overall shoe weight while maintaining comfort and support. This construction also allows for a clean, modern look and customization potential, making the Prime Extreme a standout choice for drivers who want both performance and style. Breathable Viscose Blend Lining A breathable fresh viscose blend lining helps manage heat and moisture during intense driving sessions. This helps keep the foot cool and comfortable, which is especially important during endurance racing, hot track days, and long sessions in the car. Carbon Fiber Insole for Pedal Sensitivity The flexible carbon fiber insole is designed to improve sensitivity and control through the pedals. It helps drivers feel brake pressure, throttle input, and pedal movement more clearly, giving better feedback during precise driving situations. Oil and Hydrocarbon Resistant Sole The rubber sole is resistant to oil and hydrocarbons, making it well suited for the paddock, garage, and cockpit environment. The rear spoiler design helps improve grip and support, giving drivers confidence when moving around the car or working the pedals. Protection and Durability The Sparco Prime Extreme includes an expanded foam protection insert on the side toe for improved lateral protection. A transparent silicone reinforcement on the toe adds durability in a high-wear area while preserving the clean design of the shoe. Sparco Prime Extreme Racing Shoe Specifications Approval: FIA 8856-2018 and SFI 3.3/5 Origin: Made in Italy Upper: Printable ultra-lightweight fabric Lining: Breathable viscose blend lining Lacing: Ultra-lightweight external lacing system Sole: Oil and hydrocarbon resistant rubber sole with rear spoiler Insole: Flexible carbon fiber insole Protection: Expanded foam side toe insert and transparent silicone toe reinforcement Optional Customization: Carbon fiber heel counter available on request Use: Professional racing, amateur racing, track days, and automotive competition Sparco Prime Extreme Racing Shoe FAQs Are the Sparco Prime Extreme Racing Shoes FIA approved?Yes. The Sparco Prime Extreme Racing Shoes are FIA 8856-2018 approved for motorsport competition use. Are these shoes SFI approved?Yes. The Sparco Prime Extreme Racing Shoes are also SFI 3.3/5 homologated. Are the Sparco Prime Extreme Racing Shoes made in Italy?Yes. The Sparco Prime Extreme Racing Shoes are designed and manufactured entirely in Italy. What makes these shoes good for pedal feel?The flexible carbon fiber insole and racing-focused sole construction help improve pedal sensitivity, allowing drivers to feel brake, throttle, and clutch inputs more precisely. Are these shoes breathable?Yes. The breathable viscose blend lining helps keep feet cool and dry during intense driving sessions. Can the Sparco Prime Extreme Racing Shoes be customized?Yes. Customization with a carbon fiber heel counter is available on request for additional support and protection.

Bell KC7-CMR Ayrton Senna Karting Helmet Celebrate the legacy of one of Formula 1's greatest champions with the Bell KC7-CMR Ayrton Senna Karting Helmet. Featuring Senna's iconic yellow, green, and blue racing colors, this special-edition youth karting helmet combines legendary motorsport styling with Bell Racing's advanced helmet technology, lightweight construction, and competition-ready accessories. Developed in tribute to three-time Formula 1 World Champion Ayrton Senna, this commemorative helmet honors his lasting influence on motorsport and the next generation of racing drivers. The distinctive design recreates the unmistakable colors associated with Senna throughout his racing career, providing young kart racers with a helmet that celebrates racing history while delivering modern protective performance. Built on Bell's proven KC7-CMR platform, the Ayrton Senna edition features a lightweight carbon and fiberglass composite shell, advanced 14-channel ventilation system, aerodynamic construction, and a multi-density energy-absorbing liner. Its design incorporates engineering inspired by Bell's HP7 Formula 1 helmet platform. Certified to the Snell-FIA CMR-2016 standard, the Bell KC7-CMR Ayrton Senna helmet is engineered for competitive youth kart racing. A premium factory-installed accessory package, including a Smoke Multi-Layer Blue SE07 2mm shield, clear air intakes, rear spoiler, and Bell HP helmet bag, completes this special-edition racing helmet. Bell KC7-CMR Ayrton Senna Helmet Features Iconic Ayrton Senna Design: Special-edition graphics featuring the legendary yellow, green, and blue colors associated with Senna's Formula 1 career. Snell-FIA CMR-2016 Certification: Certified to the youth karting helmet standard accepted by many competitive kart racing organizations. Lightweight Composite Shell: Carbon and fiberglass composite construction provides a balance of impact performance and reduced helmet mass. Formula 1-Inspired Engineering: Based on Bell's KC7-CMR platform, incorporating design technology inspired by the HP7 racing helmet. 14-Channel Ventilation System: Advanced top and chin bar ventilation provides effective air circulation and cooling. Smoke Multi-Layer Blue Shield: Factory-installed SE07 2mm racing visor with a premium multi-layer blue finish. Double-Screen Anti-Fog Technology: Optical-grade visor technology helps manage fogging in changing weather conditions. Factory-Installed Air Intakes: Transparent top and side air intakes enhance the helmet's ventilation system. Factory-Installed Rear Spoiler: Clear aerodynamic rear spoiler delivers a professional racing appearance. Advanced Energy-Absorbing Liner: Multi-density, multi-piece interior liner engineered to manage impact energy. Comfort-Oriented Interior: Durable non-fireproof racing helmet lining designed for competitive karting. Aerodynamic Shell Design: Optimized shell and shield positioning helps manage airflow and internal noise. Bell HP Helmet Bag: Premium protective bag included for transportation and storage. Ayrton Senna Special Edition – A Tribute to a Formula 1 Legend The Bell KC7-CMR Ayrton Senna Karting Helmet celebrates the extraordinary racing career and lasting legacy of three-time Formula 1 World Champion Ayrton Senna. Created as a commemorative special edition, the helmet features the unmistakable yellow, green, and blue colors that became synonymous with Senna's racing identity. The bold graphics pay tribute to his passion, determination, and achievements in motorsport. Developed in recognition of Senna's enduring influence on future generations of racing drivers, this helmet combines historical significance with the advanced protection and comfort of Bell's modern KC7-CMR platform. For young drivers inspired by Senna's commitment to excellence, the KC7-CMR Ayrton Senna edition offers an opportunity to celebrate an iconic racing legacy while competing with professionally engineered protective equipment. Lightweight Carbon and Fiberglass Composite Shell The Bell KC7-CMR uses a lightweight carbon and fiberglass composite shell designed to deliver protective performance while minimizing unnecessary helmet weight. Helmet mass is especially important in youth karting. During competitive racing, repeated cornering, braking, and acceleration forces place additional demands on a young driver's neck and shoulders. Bell's carefully engineered composite construction helps reduce these loads while maintaining the structural performance required for Snell-FIA CMR-2016 certification. The outer shell is paired with an advanced multi-density, multi-piece energy-absorbing liner engineered to manage impact forces across different crash conditions. Formula 1-Inspired Aerodynamic Performance The KC7-CMR helmet platform incorporates aerodynamic design principles inspired by Bell's professional HP7 racing helmet. The streamlined shell shape and optimized shield positioning help manage airflow around the helmet while reducing unnecessary turbulence and internal noise. The Ayrton Senna special edition includes a factory-installed transparent rear spoiler, complementing the aerodynamic helmet profile and delivering a professional motorsport appearance. Combined with the helmet's lightweight construction, the aerodynamic design supports comfort and stability during competitive kart racing. Advanced 14-Channel Ventilation System The Bell KC7-CMR Ayrton Senna helmet features an advanced ventilation system incorporating 14 air intake and extraction channels. Airflow enters through carefully positioned top and chin bar ventilation openings, circulating through the helmet to help regulate interior temperatures and improve driver comfort. The special edition includes clear top and side air intakes already installed, creating a race-ready ventilation configuration without requiring additional accessory purchases. Effective helmet ventilation is particularly beneficial during hot weather, lengthy practice sessions, qualifying, and competitive kart racing events where temperature management and comfort are essential. SE07 2mm Smoke Multi-Layer Blue Racing Visor The Bell KC7-CMR Ayrton Senna edition includes a premium factory-installed SE07 2mm Smoke Multi-Layer Blue racing shield. The blue multi-layer visor provides a distinctive appearance that complements the helmet's traditional Ayrton Senna graphics, enhancing its professional racing style. Bell's KC7-CMR visor platform uses optical-grade, double-screen anti-fog technology designed to help control condensation and maintain visibility during changing track conditions. The optimized eyeport provides a wide field of vision, helping young drivers monitor surrounding competitors, recognize passing opportunities, and maintain awareness during wheel-to-wheel kart racing. Premium Factory-Installed Racing Accessories One of the standout advantages of the Bell KC7-CMR Ayrton Senna special edition is its premium accessory package. Rather than purchasing several common racing helmet upgrades separately, drivers receive a professionally configured helmet with key accessories already installed. Included accessories: SE07 2mm Smoke Multi-Layer Blue racing shield Transparent top air intakes, factory installed Transparent side air intakes, factory installed Transparent rear aerodynamic spoiler, factory installed Premium Bell HP helmet bag These accessories complement the helmet's ventilation, aerodynamic design, appearance, and overall race-day convenience. Snell-FIA CMR-2016 Certified Youth Karting Protection The Bell KC7-CMR Ayrton Senna Karting Helmet is certified to the Snell-FIA CMR-2016 standard, developed specifically for younger kart racing drivers. This certification addresses the protective needs of youth competitors while emphasizing lightweight helmet construction, an important consideration for developing drivers. The KC7-CMR platform is designed for karting drivers under 18 years of age. Individual karting organizations may establish additional age-specific requirements, so always verify helmet eligibility with the applicable racing series or sanctioning body. The KC7-CMR is specifically engineered for kart racing and should not be considered a substitute for an automobile racing helmet when Snell SA or another automobile racing certification is required. Bell KC7-CMR Ayrton Senna Helmet Weight The KC7-CMR uses lightweight composite construction to help minimize helmet mass without compromising its intended protective performance. Sizes 54–56: Approximately 1,185 grams (2.61 lbs), with a manufacturer tolerance of ±3%. Sizes 57–59: Approximately 1,230 grams (2.71 lbs), with a manufacturer tolerance of ±3%. These are Bell's published KC7-CMR platform weight figures. Actual helmet weight may vary depending on size, configuration, and installed accessories. Bell KC7-CMR Ayrton Senna Helmet Specifications Manufacturer: Bell Racing Helmets Model: KC7-CMR Ayrton Senna Karting Series: Bell Pro Series Helmet Type: Youth Full-Face Kart Racing Helmet Edition: Ayrton Senna Special Edition Graphic Colors: Yellow, Green, and Blue Certification: Snell-FIA CMR-2016 Shell Construction: Carbon and Fiberglass Composite Available Sizes: 54, 55, 56, 57, 58, and 59 Weight, Sizes 54–56: Approximately 1,185 g (±3%) Weight, Sizes 57–59: Approximately 1,230 g (±3%) Ventilation: 14 Air Intake and Extraction Channels Shield: SE07 2mm Smoke Multi-Layer Blue Visor Technology: Double-Screen Anti-Fog Top Air Intakes: Transparent, Factory Installed Side Air Intakes: Transparent, Factory Installed Rear Spoiler: Transparent, Factory Installed Energy-Absorbing Liner: Multi-Density, Multi-Piece Construction Interior: Non-Fireproof Racing Helmet Lining Helmet Bag: Bell HP Helmet Bag Included Primary Application: Competitive Youth Kart Racing Bell KC7-CMR Ayrton Senna Helmet Sizing Chart Bell KC7-CMR Ayrton Senna Karting Helmet Frequently Asked Questions Is the Bell KC7-CMR Ayrton Senna helmet approved for youth kart racing? Yes. The Bell KC7-CMR Ayrton Senna helmet is certified to the Snell-FIA CMR-2016 standard and is intended for youth kart racing competitions that accept this certification. Is this an official Ayrton Senna special-edition helmet? Yes. Bell Racing created the KC7-CMR Ayrton Senna edition to honor the legendary three-time Formula 1 World Champion, featuring his unmistakable yellow, green, and blue racing colors. What makes the Ayrton Senna edition different from the standard KC7-CMR? The special edition features Ayrton Senna-inspired factory graphics and a premium accessory package, including a Smoke Multi-Layer Blue SE07 2mm visor, transparent air intakes, rear spoiler, and Bell HP helmet bag. Is the Bell KC7-CMR Ayrton Senna a carbon fiber helmet? The helmet uses a lightweight carbon and fiberglass composite shell. It is based on the standard KC7-CMR platform and should not be confused with Bell's separate KC7-CMR Carbon model. What sizes are available in the Bell KC7-CMR Ayrton Senna helmet? The helmet is available in sizes 54, 55, 56, 57, 58, and 59. Refer to Bell's official sizing guide for proper fitment. How much does the Bell KC7-CMR Ayrton Senna helmet weigh? The KC7-CMR platform has published weights of approximately 1,185 grams for sizes 54–56 and 1,230 grams for sizes 57–59, with a tolerance of ±3%. Installed accessories can affect the final weight. What visor is included with the Ayrton Senna edition? The helmet includes a factory-installed SE07 2mm Smoke Multi-Layer Blue racing shield. Does the Bell KC7-CMR have anti-fog technology? Yes. The KC7-CMR visor platform uses double-screen anti-fog technology designed to help manage condensation during changing temperature and humidity conditions. Are the top air intakes and rear spoiler included? Yes. Transparent top and side air intakes and a transparent rear aerodynamic spoiler are included and factory installed. How many ventilation channels does the KC7-CMR have? The KC7-CMR incorporates 14 air intake and extraction channels to help circulate air through the helmet during competitive racing. Does the helmet include a Bell helmet bag? Yes. A premium Bell HP helmet bag is included with the Ayrton Senna special edition. Is the Bell KC7-CMR Ayrton Senna suitable for adults? The KC7-CMR was developed primarily for youth karting. Adult use depends on proper helmet fit and the certification requirements of the event. It should not be used where an automobile racing helmet certification is mandatory. What is the difference between Snell K2020 and CMR2016? Snell K2020 is a karting helmet standard commonly used for older or adult kart racers. Snell-FIA CMR2016 addresses the specific protective and weight requirements of younger karting drivers. Always consult the rules of your racing organization to determine which certifications are permitted. How should I clean my Bell KC7-CMR Ayrton Senna helmet? Use a soft microfiber cloth and cleaning products approved for racing helmets. Avoid abrasive cleaners, strong solvents, and harsh chemicals. Follow Bell's care instructions for cleaning the shell, visor, and interior components. Can I install additional accessories on the helmet? Only install accessories approved by Bell Racing for the KC7-CMR platform. Do not drill, cut, or otherwise modify the helmet shell, as unauthorized modifications may compromise protective performance and certification. When should I replace my karting helmet? Replace a helmet after a significant impact or when structural damage is suspected. Regularly inspect the shell, visor, chin strap, and interior. Follow Bell's maintenance recommendations and your racing organization's helmet age and certification requirements. Why choose the Bell KC7-CMR Ayrton Senna Karting Helmet? The Bell KC7-CMR Ayrton Senna combines iconic Formula 1-inspired styling, lightweight composite construction, Snell-FIA CMR-2016 certification, advanced ventilation, and a premium factory-installed accessory package. It is an exceptional choice for young racers who want to celebrate Ayrton Senna's legacy while competing with professionally engineered karting equipment.

Sparco Competition R 350 Steering Wheel 350mm Suede or Leather The Sparco Competition R 350 Steering Wheel is designed for drivers who demand superior control, comfort, and precision. Featuring an anatomic grip with varied diameters, this wheel ensures excellent feel and reduced fatigue during intense driving sessions. A signature yellow leather centering stripe helps maintain precise wheel alignment in high-performance conditions. Available in your choice of premium suede or leather, the R350 combines Italian craftsmanship with race-bred technology. Key Features Diameter: 350mm – ideal for competitive racing and performance driving Dish: 39mm depth, offering enhanced driver positioning Grip: Varied anatomic design with optimized thickness for comfort and control Cover Material: Choice of durable suede or premium leather Yellow leather centering stripe for quick wheel orientation Black cross stitching for added strength and longevity Why Choose the Sparco Competition R 350? Developed with decades of motorsport heritage, Sparco steering wheels are trusted by professional racers worldwide. The R350’s ergonomic grip, robust construction, and visual alignment stripe make it a top choice for drivers who want precise steering feedback on the track or during spirited performance driving. Whether paired with a suede finish for maximum race grip or leather for everyday comfort, the R350 delivers unmatched performance and style. Sparco steering wheels may require a vehicle-specific hub adapter, sold separately.

Stilo ST5 Thick Perimeter Seal Tear-Offs 9-Pack Protect your stilo ST5 helmet shield from rocks, dirt, and debris with these 4 mil (0.1 mm) thick tear-offs. Measuring 4/1000th of an inch thick (the most popular thickness for open-cockpit and harsh environment racers), these tear-offs are perfect for road racing and dirt track use. The perimeter seal system used in these tear-offs provides a tighter fit against your Stilo ST5 visor, preventing dirt, dust, and water from getting between the visor and tear-off stack. This package of 4 mil tear-offs consists of three stacks of three tear-offs each, for nine tear-offs total. Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo Perimeter Seal Tear-Off Pack Details Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil (0.1 mm) Gradient/tint: clear Fits all Stilo ST5 helmets Does not fit Stilo ST4F or Stilo ST4W helmets Three stacks of three tear-offs (nine total) Note: These are the thicker tear-offs (4 mil) for your Stilo ST5 series helmet. They are used primarily in open-cockpit road racing and other harsh racing environments.

PFC Front Slotted Replacement Disc V3 Porsche 992 GT3 Cup/718 GT4 RS Clubsport Dimensions: 380mm diameter, 34mm thickness Brake disc only, does not include brake hat (fits on OEM hat). Not for use in official Porsche Carrera Cup championships. PFC has released their new V3 disc and hat technology. This advanced design features a patented attachment mechanism using a retention ring to hold the hat and disc together. This eliminates the need for torque wrenches, giving you a no-hassle solution to the need for a quick, efficient disc replacement. In addition to being convenient, PFC's new V3 technology is much lighter than previous designs, reducing unsprung weight on your car. This V3 disc retention method is based on the use of a two- or three-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat. PFC V3 Disc Features: Reduced mass on disc connecting flanges, which reduces thermal distortion (more specifically, coning) at race temperatures. Reduced coning allows the pads to sit flatter on the disc, which better utilizes the available radial depth. There is better pad force distribution and the brakes will run cooler, reducing hot spots on the disc. This will also have the benefit of reduced taper wear of the pads. More heat will be contained in the brake faces because there is less of a heat sink in the flanges. This reduces thermal stress at the ID of the disc and reduces the chance of thermal cracking to occur. Consistent disc float from race beginning to end. As a race progresses with a bobbin disc, float will often be reduced when a bobbin is no longer sitting square in the disc. Reduced float will increase piston knockback, increase pedal travel and add vibration. Reduced complexity. The number of brake assembly parts is reduced from 38+ for a bobbin drive disc to just 3 in a V3 disc assembly Decreased assembly time. You can assemble a V3 race disc in a matter of seconds. Part numbers: 380.34.0052.452 380.34.0052.462

Paragon Ignite Short Sleeve Top The Paragon Ignite top is Paragon’s flame-retardant option for keeping your core cool in the most intense racing environments. The Ignite Short Sleeve Top is made from a 4.8 oz. Modacrylic/FR Rayon blend that has excellent quick-drying qualities. It features double the sewn-in coolant tubing compared to a typical cooling garment, giving you a lot of tubing covering your core. Available in Small through XXL with a true-to-size fit, the Paragon Ignite Short Sleeve Top has either right- or left-exit tubing to suit your driver cooling setup. Paragon offers the option to add a hood to the Paragon Ignite top for extra cooling to the head. The Paragon Ignite hood is made from the same material as the Paragon Ignite Short Sleeve Top for a seamless connection. Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite series is for you. Paragon Ignite Pro FR Cooling Shirt Details Manufacturer: Paragon Flame resistance rating: none Tubing exit: choose left- or right-exit Construction: Modacrylic/FR Rayon blend for superior moisture wicking Anti-microbial: Ag47 protection Double the tubing of standard cooling shirt Won’t shrink, pick, or fade Extra length Clean seams for all-day comfort Machine wash, machine dry

Paragon 4.0" Blower Hose Fitting Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.