Auto Racing Driver Safety Gear at CMS – Page 24

CHILLOUT-PRO-SPORT-UNDERLAYER-SHIRT-TOP-NOMEX-CHARCOAL-FRONT-IMAGE

Chillout Systems Chillout Pro Sport Underlayer Shirt $274.00

Chillout Pro Sport Fire Resistant Shirt Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. Chillout Pro Sport Shirt Details FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS to XXL Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

CHILLOUT-PRO-SPORT-PANT-BOTTOM-BLACK-FRONT-IMAGE

Chillout Systems Chillout Pro Sport Underlayer Pants $251.00

Chillout Pro Sport Fire Resistant Pants Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. Chillout Pro Sport Pants Details FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS to XXL Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Sparco S.p.A. Sparco Pista Balaclava $162.00

Sparco Pista Balaclava Introducing the new Sparco Pista Balaclava derived from Redbull F1 team Ever felt like you're wearing a medieval knight's helmet instead of a balaclava? Say goodbye to the Dark Ages and hello to the future with Sparco's Pista Balaclava. This isn't just any headgear; it's the Ferrari of balaclavas. Seamless Comfort, Like Wearing a Cloud: Imagine wearing something so comfortable that you forget it's there. That's the Pista for you. Its Ultra flat seam structure means no annoying stitches poking your skin. It's like a gentle hug for your head, all race long. X-Cool Treatment, Stay Chill When Things Heat Up: Picture this: you're in the middle of an intense race, sweat is your uninvited guest, but wait – the Pista X-Cool treatment kicks in. It's like having a personal AC unit in your helmet, keeping you cool, calm, and collected. Plus, it's anti-bacterial, so you can say goodbye to funky smells. Your pit crew will thank you. Lighter than a Feather, Stronger than a Rhino: Okay, maybe not a rhino, but you get the idea. The superlight construction of the Pista means you won't even feel its weight, allowing you to focus on what really matters – winning. SPARCO PISTA BALACLAVA SPECIFICATIONS Certification: FIA 8856-2018 approved. Because safety is sexy. Structure: Ultra flat seams. Because who likes chafing? Mic attachment and cable slot as well for ultimate in communication Treatment: X-Cool. Because staying cool is half the battle. Construction: Superlight. Because every gram counts. Composition: 62% VISCOSE 31% METARAMID 5% XLANCE 2% PARARAMIDE. SPARCO PISTA BALACLAVA FAQs How does the X-Cool treatment work? It's like magic, but with science. The treatment reacts with your sweat to create a cooling effect. Basically, it's your personal climate control. Is it easy to wash? Absolutely! It's like caring for a delicate flower, but much easier. Just follow the care instructions, and it'll be ready for your next race. Will it fit under my helmet comfortably? Yes! It's designed to be your helmet's best friend. Snug, comfortable, and unobtrusive. Ready to Hit the Track Like a Pro? Don't let your headgear hold you back. Grab the Pista Balaclava from Sparco and feel the difference from the starting line to the checkered flag. Join the winners' circle today. Remember, in the world of racing, every second counts, and so does every layer of your gear. Get yours now and race like never before!

MagLock Air Helmet Side Only Kit components displayed, including a black helmet side attachment, a black dust cap, a black visor sticker, and a tool kit.

RainMaker Solutions, Inc. MagLock Air Connector Kit | Helmet End $84.00

Maglock Air Connector Kit Maglock Air hose is sold separately. This kit attaches to your helmet's ventilation inlet to create a magnetic connection point for your Maglock air hose (sold separately). This Maglock magnetic hose connection greatly reduces neck fatigue during use and does not come loose in high-G or high impact environments. Yet it allows super-easy connection and disconnection from your air supply when needed. What's included: Maglock Air Connector (helmet side) Maglock Air dust cap Maglock visor sticker Tool kit

-35% sale

Alpinestars Race v3 Nomex Fireproof Shirt - Competition Motorsport

Alpinestars Alpinestars Race v3 Nomex Underlayer Shirt $151.00 $232.00

Alpinestars Race v3 Nomex Fireproof Underlayer Shirt This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. Alpinestars Race v3 Nomex Shirt Construction Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements. Alpinestars Race v3 Nomex Shirt Protection Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® fire-resistant material Alpinestars Race v3 Nomex Shirt Key Features Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Coolshirt Coolshirt Insulator Tray Pad(Garage Sale) $18.00

Coolshirt Insulator Tray Pad (13 and 19qt) - Keep Your Cool on the Track Ever been mid-race, pushing your car to the limit, only to feel the sweltering heat start to take its toll? Enter the Coolshirt Insulator Tray Pad—your secret weapon for staying cool and focused, whether you’re tearing down the straightaway or navigating those tight corners. Designed for racers who know that every degree matters, this tray pad works with your Coolshirt system to ensure your cooling water stays icy cold from start to finish. Built for both the 13 and 19-quart systems, the Coolshirt Insulator Tray Pad isn’t just an accessory—it’s a game-changer. Key Features: Ultimate Insulation: Keeps your cooling water cold for longer, helping you maintain optimal body temperature during those intense track sessions. Durable Construction: Made from high-quality, heat-resistant materials that stand up to the rigors of racing. Perfect Fit: Specifically designed to fit 13 and 19-quart Coolshirt systems, ensuring no leaks or loss of efficiency. Lightweight Design: Adds insulation without adding unnecessary weight to your setup. Why You’ll Love It: Imagine slicing through the track with the confidence that comes from knowing your Coolshirt system is performing at its peak. The Coolshirt Insulator Tray Pad ensures your cooling system stays frosty, so you can stay laser-focused on the race. No more overheating, no more distractions—just you, your car, and the finish line. Product Specifications: Material: High-density foam with heat-resistant outer layer. Compatibility: Fits both 13 and 19-quart Coolshirt systems. Weight: Lightweight FAQs: Q: Will the Coolshirt Insulator Tray Pad fit my existing Coolshirt system? A: Absolutely! The tray pad is designed to perfectly fit both 13 and 19-quart Coolshirt systems. Q: How does the tray pad improve my Coolshirt system’s performance? A: By providing superior insulation, it keeps your cooling water cold for longer, allowing your Coolshirt system to maintain your body temperature more effectively throughout the race. Q: Is the tray pad easy to install? A: Yes! Simply place it under your Coolshirt system’s cooler, and you’re good to go. No tools, no fuss. Why Wait? You’re already pushing your limits on the track—don’t let heat hold you back. The Coolshirt Insulator Tray Pad is the easy, effective upgrade that ensures you stay cool and collected, no matter how intense the race gets. Add it to your cart now and experience the difference in your next race!

-35% sale

Alpinestars Race v3 Nomex Pants - Competition Motorsport

Alpinestars Alpinestars Race v3 Nomex Pants $119.00 $182.00

Alpinestars Race v3 Nomex Fireproof Underlayer Pants Lightweight and offering high breathability and flame-resistance properties, the Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. Alpinestars Race v3 Nomex Pants Construction Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements. Alpinestars Race v3 Nomex Pants Protection Certified to the new FIA 8856-2018 homologation standard. Constructed from Lenzing FR® flame-resistant material. Alpinestars Race v3 Nomex Pants Key Features Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Arai Helmet Limited Arai PED Kit (Clear) $120.00

Arai PED Kit – Maximize Your Helmet’s Aerodynamic Performance Strap in, because the Arai PED (Performance Enhancing Device) Kit is about to change the way you feel the wind at high speeds. Designed specifically for the Arai GP-6 series helmets (GP-6RC, GP-6, GP-6S), this kit transforms your helmet into an aerodynamic machine that glides through the air like a jet on race day. It’s not just about looking cool—though, let’s face it, you will—it’s about improving your stability and reducing that pesky helmet lift and buffeting. Feel like you're getting a bit of a head-bobble when you're pushing high speeds in your open-cockpit beast? The Arai PED Kit is here to keep your helmet (and you) in check. This kit includes a front chin spoiler to add downforce and a rear spoiler to eliminate lift. Whether you’re slicing through the air on a straightaway or taking a tight corner, the Arai PED Kit gives you the aerodynamic edge you didn’t even know you needed. Arai PED Kit Features Aerodynamic Spoilers: Includes one front chin spoiler and one rear spoiler for superior high-speed stability. Custom Fit for Arai GP-6 Series: Compatible with GP-6RC, GP-6, GP-6S, and even the GP-5W and SK-6 karting helmets. Modular Use: Use the front and rear spoilers independently or together—choose the level of aerodynamic wizardry that suits your needs. Transparent Design: Clear plastic keeps your helmet’s paint job front and center, or you can paint it to match for a seamless look. Easy Installation: Pre-applied double-sided tape makes installation a breeze. Just peel, stick, and hit the track. Arai PED Kit Product Specifications Manufacturer: Arai Helmets Manufacturer part no.: 10-2064 Material: clear plastic (paintable) Included in kit: one front chin spoiler, one rear spoiler Fits these Arai helmets: GP-6RC GP-6 GP-6S GP-5W SK-6 Installation: pre-applied high strength double-sided tape Frequently Asked Questions (FAQs): Will this fit my Arai helmet? Answer: If you’re rocking an Arai GP-6RC, GP-6, GP-6S, GP-5W, or SK-6 helmet, the PED Kit is your aerodynamic best friend. For other models, it may not fit quite right, so be sure to check compatibility. Do I need both the front and rear spoilers? Answer: Not necessarily! You can use either spoiler independently depending on what kind of aerodynamic stability you’re looking for. Want downforce on the front? Just use the chin spoiler. Need to fight helmet lift? The rear spoiler has your back (or head, really). How easy is the installation? Answer: It’s as easy as peeling off the backing of double-sided tape and sticking the spoilers to your helmet. No tools, no fuss, just a fast mod that makes a big difference on track days. Will it affect my helmet’s paint job? Answer: Not at all! The spoilers are clear to let your custom paint shine through, but you can also paint them if you’re looking to blend them into your helmet’s design. Why You Need This Kit: Spoil Yourself (and Your Helmet) Imagine this: You’re screaming down the straightaway, engine roaring, but your helmet stays locked in place with pinpoint stability. The buffeting? Gone. The lift? A thing of the past. All thanks to your new Arai PED Kit. You’re not just racing; you’re gliding through the air with precision. Why settle for standard when you can enhance your performance and experience pure aerodynamic bliss? Ready to boost your helmet’s performance? Click “Add to Cart” now and get the edge on your next track day!

-65% sale

Sparco S.p.A. Sparco X15 Drag Racing Jacket (Garage Sale) | SFI 3.2A/15 $560.00 $1,576.00

Sparco X-15 Jacket Lightweight Protection That Lets You Breathe Ready to leave your competition in the dust (while looking and feeling great)? The Sparco X-15 Jacket Suit is here to help you do just that! It’s the lightest, most breathable SFI 15-rated suit out there, designed to keep you cool under pressure—literally. Made from Sparco’s exclusive X-light multi-layer fabric, this suit offers incredible comfort without compromising on protection. Whether you’re a seasoned drag racing pro or gearing up for your first track day, the X-15 ensures you're fully protected and moving freely behind the wheel. Available as a separate jacket and pants, the X-15 suits your style (and your size!). The jacket and single-piece suits are designed with fully floating sleeves for maximum mobility—so you can celebrate your victory with ease. Plus, the pants have an expandable waist (yes, Sparco gets it—comfort matters) and internal knitted cuffs for that perfect fit. Oh, and did we mention the SFI-approved sewn-on arm restraints? Yeah, they’ve got you covered there too. With SFI 3.2A/15 approval, you’re ready to race at the highest levels with confidence. So, what are you waiting for? Suit up in the Sparco AIR-15 and let your competition feel the burn—while you stay cool. Key Features X-Light Multi-Layer Fabric: The lightest and most breathable SFI 15-rated fabric for unbeatable comfort and safety. One-Piece or Two-Piece Options: Choose between the classic one-piece or a two-piece jacket and pants set for versatility. Maximum Mobility: Fully floating sleeves on jackets and one-piece suits ensure you have full range of motion. Comfortable Fit: Expandable waist and internal knitted cuffs on pants for that just-right fit, even during intense racing. SFI-Approved Arm Restraints: Keep things secure and compliant with SFI 3.2A/15 sewn-on arm restraints. SFI 3.2A/15 Certified: Ready for serious drag racing and high-speed performance. Sparco X15 Jacket Specs Fabric: Sparco X-light multi-layer material Fitment: Available in various sizes to ensure the perfect fit Suit Style: One-piece overall or two-piece jacket and pants Approval: SFI 3.2A/15 rated for top-level drag racing protection Arm Restraints: SFI approved, sewn-on Sparco X15 Jacket FAQs: Q: Can I buy the jacket and pants separately?A: Absolutely! The Sparco X-15 is available as either a single-piece overall or you can mix and match with separate jacket and pants to suit your needs. Q: What makes this suit more breathable than others?A: Sparco’s exclusive X-light multi-layer fabric is designed for ultimate breathability, so you stay cool even when the competition heats up. Q: Is this suit SFI approved?A: Yes, the AIR-15 is SFI 3.2A/15 approved, making it compliant with drag racing regulations and ensuring top-level protection. Q: How do the arm restraints work?A: The sewn-on SFI-approved arm restraints help keep your arms secure during racing and are mandatory for compliance in certain high-speed events. Q: How do I find the right size for me?A: Sparco offers the X-15 in a wide range of sizes to ensure the best possible fit. Check the size chart or contact us for assistance in finding your perfect match. Time to Get Serious – Suit Up Now! Why compromise between comfort and protection? With the Sparco X-15 Drag Jacket, you get the best of both worlds. Whether you're on the strip chasing records or just looking to stay cool and agile during your next track day, this suit has you covered—literally. Don’t settle for anything less than the lightest, most breathable, and protective suit in the game. Ready to take your performance to the next level? Click "Add to Cart" and suit up with Sparco X-15 today!

-55% sale

Sparco x-20 Drag Pants made from lightweight X-light fabric, providing SFI 3.2A/15 fire protection and maximum comfort for drag racers.

Sparco S.p.A. Sparco AIR-15 Drag Racing Pants (Garage Sale) | SFI 3.2A/15 $1,260.00 $2,800.00

Sparco AIR-15 Pants The Sparco AIR-15 Pants are purpose-built for serious drag racers who demand uncompromising protection without sacrificing comfort. Designed with lightweight materials and tailored ventilation, these pants meet the stringent SFI 3.2A/15 certification while offering the breathable performance needed for long days at the strip. Whether you're staging a Pro Mod or dialing in your bracket car, the AIR-15 Pants are race-day essentials. SFI 15 Certified Drag Racing Pants for Maximum Safety Features Certified to SFI 3.2A/15 for high-level fire protection Lightweight, multi-layer construction designed for drag racing Strategically ventilated for breathability and heat management Comfortable tailored fit for optimal mobility and reduced bulk Finished in sleek black, available here in Size 68 Ideal for pairing with Sparco AIR-15 Jacket (sold separately) Sparco AIR-15 Pants FAQs Are the AIR-15 Pants approved for NHRA and other sanctioning bodies? Yes, they are SFI 3.2A/15 certified, which meets the fire protection requirements for most high-horsepower drag racing classes. What’s the benefit of the AIR-15 design? The AIR-15 Pants use advanced lightweight materials and integrated ventilation to keep racers cool while maintaining top-level protection. Are these pants meant to be used with a jacket? Yes, they’re typically paired with the Sparco AIR-15 Jacket to form a complete fire-resistant driver suit. Is Size 68 a standard fit? Sparco Size 68 is designed for larger drivers; please refer to Sparco's sizing chart for exact waist and inseam measurements. Built for racers who won’t compromise on safety or comfort, the Sparco AIR-15 Pants give you the confidence to focus on one thing—winning.

-45% sale

Sparco S.p.A. Sparco Pro Jacket(Garage Sale) $1,010.00 $1,820.00

Sparco Pro Jacket: Lightweight Fire-Resistant, and Ready to Race Feel the adrenaline and confidence of the Sparco Pro Jacket, a perfect blend of protection and mobility. Made with breathable Nomex fabric, this jacket is SFI 3.2A/5 certified, giving you the top-tier fire resistance you need on the track. The fully floating sleeves ensure maximum flexibility, making it easy to move, drive, and dominate your track day. And let’s not forget the style—this jacket comes in a sleek all-black design, perfect for racers who want to look as good as they perform. Key Features & Benefits SFI 3.2A/5 Certified: Designed for safety at all levels of competition. Breathable Nomex Fabric: Lightweight and fire-resistant, keeping you cool under pressure. Fully Floating Sleeves: Maximum freedom of movement, so you can race without restrictions. Sleek All-Black Design: Look sharp while staying safe. Sparco Pro Jacket Specs Material: Lightweight Nomex fabric. Certification: SFI 3.2A/5. Color: All-black. Fit: Designed for high mobility and comfort on track days. Sparco Pro Jacket FAQs Q: Is this jacket suitable for professional racing?A: Yes! The SFI 3.2A/5 certification ensures it’s built for professional and competitive racing environments. Q: How should I care for the Sparco Pro Jacket?A: We recommend dry cleaning to maintain the fire-resistant properties of the Nomex fabric. Q: What’s the advantage of floating sleeves?A: The fully floating sleeves allow unrestricted movement, making it easier to handle the car without feeling restricted. Ready to suit up? Get the Sparco Pro Jacket now and experience comfort, protection, and style like never before. Your best lap is waiting—grab yours today!

Two-piece Sparco x20 Drag Suit featuring a jacket and pants set, designed for flexibility and comfort during drag racing.

Sparco S.p.A. Sparco AIR-15 Drag Racing Suit | SFI 3.2A/15 from $1,506.00

Sparco AIR-15 Drag Suit Lightweight Protection For Your Fastest Runs When it’s you against the quarter-mile, every millisecond counts—and the Sparco AIR-15 Drag Suit is here to help you shave off time while keeping you cool, comfortable, and, most importantly, protected. As the lightest and most breathable SFI 15-rated drag racing suit on the market, the AIR-15 gives you the edge to leave your competition in the dust. Maximum Protection Without the Bulk Let’s face it: drag racing is about speed, precision, and leaving your rivals in awe. The AIR-15 is made from Sparco’s exclusive X-light multi-layer fabric, offering a perfect balance between weight and protection. You’ll feel like you’re wearing a second skin instead of a suit, but with all the safety of an SFI-approved armor. It’s rated SFI 3.2A/15, which means you get top-tier fire resistance without the bulk. Because in drag racing, the only thing that should be heavy is your foot on the gas. Precision Fit for Precision Driving Whether you’re pulling G’s off the line or cruising back to the pits, the AIR-15 has been designed with drag racers in mind. The suit comes in both a one-piece overall and a two-piece jacket and pants set, so you can choose the fit that works best for your racing style. Plus, features like fully floating sleeves, internal knitted cuffs, and an expandable waist ensure maximum mobility. So, when you’re making those split-second shifts or lining up the perfect launch, you won’t feel held back by your gear. Bonus points? This suit includes SFI-approved sewn-on arm restraints, so you’ll stay safe and secure without sacrificing flexibility. Sparco AIR-15 Drag Suit Key Features X-Light Multi-Layer Fabric: Unmatched comfort and breathability while providing SFI 3.2A/15 fire protection. Available in One-Piece or Two-Piece Sets: Choose the style that best suits your needs—either a single overall (in black only) or a jacket and pants combo (with a black or grey jacket). Fully Floating Sleeves and Expandable Waist: Designed to move with you, not against you, for full control on the strip. SFI-Approved Arm Restraints: Stay locked in safely during your run. Internal Knitted Cuffs: Keep everything snug while preventing unwanted shifts or movement during high-speed runs. Pants only available in Black Frequently Asked Questions (FAQ) 1. Is the AIR-15 suit legal for competitive drag racing?Absolutely! The AIR-15 meets the SFI 3.2A/15 standard, which is required for high-speed drag racing events. You’ll be protected and compliant at all your races. 2. What’s the difference between the one-piece and two-piece options?The one-piece is perfect for those who prefer seamless protection, while the two-piece gives you the flexibility to remove the jacket between runs. Both options offer the same high level of protection and comfort. Ready to Feel the Thrill? The Sparco AIR-15 Drag Suit is your ultimate companion for the drag strip. Offering unparalleled comfort, protection, and style, it’s designed for drag racers who take their craft seriously—and want to look good while doing it. Order now and get ready to launch your racing game into overdrive!

Sparco S.p.A. Sparco X-20 Drag Racing Suit | SFI 3.2A/20 from $1,541.00

Sparco X-20 Drag Racing Suit Lightweight Protection For High-Speed Action Ready to feel invincible on the drag strip? Enter the X-20 Drag Racing Suit—a blend of protection, comfort, and style that doesn’t mess around when it comes to keeping you safe at top speed. This isn’t your average suit; it’s a 7-layer fortress of protection made from our exclusive X-Light fabric. Whether you’re flooring it in a Top Fuel dragster or just trying to shave milliseconds off your ET in a door-slammer, the X-20 has you covered—literally. Features That Speak for Themselves SFI 3.2A/20 Approved – Translation: This suit is built to handle extreme heat and impact, meeting the highest safety standards in the sport. Exclusive X-Light Fabric – It’s like wearing a cloud that’s been beefed up for battle. You get breathability and flexibility without giving up protection. Fully Floating Sleeves – Mobility matters when you’re strapped in, so we’ve got you covered with sleeves that let you steer, shift, and fist pump when you crush that quarter-mile. Expandable Waist & Internal Knitted Cuffs – Because comfort matters. A stretchy waist and snug cuffs make sure this suit fits just right, so you can focus on hitting the throttle. One Piece or Two? – Choose between a single-piece overall or a two-piece jacket and pants set. Either way, you’re winning in style. Suit Technology SFI Rating: 3.2A/20 Material: 7 layers of X-Light fabric Design: Box-quilt stitching for extra durability Options: Available as a one-piece suit or two-piece jacket and pants set Size Range: (Insert size details here) – Fits like a glove… that’s also fireproof. Sparco X-20 FAQs Q: Is the X-20 suit fireproof?A: You bet! With its SFI 3.2A/20 rating, this suit can withstand intense heat, protecting you from the fire risks inherent in drag racing. Q: Can I wash my X-20 suit at home?A: Not quite. Due to the specialized materials and construction, you’ll want to have this suit professionally cleaned to maintain its protective properties. Q: How should the X-20 fit?A: Think snug, but not restrictive. The expandable waist and internal cuffs will help it conform to your body while allowing freedom of movement where you need it most—like your arms and legs. Q: Is this suit approved for professional drag racing?A: Absolutely! The X-20 meets SFI 3.2A/20 standards, so you’re race-ready whether you’re competing in sanctioned events or just breaking personal records. So, are you ready to suit up and unleash your inner speed demon? The X-20 Drag Racing Suit is built for the bold, for the racers who want to feel light, move fast, and stay protected. Don’t just imagine yourself crossing the finish line—make it a reality. Get your X-20 Drag Racing Suit today and feel the difference between a race and a victory!

-61% sale

Sabelt S.p.A. Sabelt Hero TS-9 GT Pro Driver Race Suit (Garage Sale) $903.00 $2,311.00

Sabelt Hero TS-9 GT Pro Racing Suit Precision Protection, Lightweight Performance When you’re tearing up the track, every second counts. Enter the Sabelt Hero TS-9 GT Pro Racing Suit—a professional-grade, 3-layer driver’s suit that combines performance, protection, and comfort. Featuring a super-light woven flame-resistant outer layer and a soft knit inner layer for ultimate protection, this suit weighs in at just 380 grams per square meter, offering all the safety without the bulk. What’s more? The pre-curved sleeves prevent that annoying bunching while driving, and knit panels around the shoulders and back offer freedom of movement and ventilation, ensuring that you’re not just fast but also cool and comfortable behind the wheel. Key Features & Benefits 3-layer construction: Combines safety, comfort, and durability, featuring a honeycomb middle layer for added insulation. Precurved sleeves & knit panels: Maximizes mobility and ventilation where it matters most. Flame-resistant materials: For serious safety on the track. Matte outer layer: Available in sleek Red, with a low-profile collar for comfort. Product Specifications Material: Flame-resistant woven fabric (outer), honeycomb insulation (middle), soft knit (inner). Weight: 380 grams per square meter. Color: Red (matte finish). Fit: Pre-curved sleeves, low collar, knit panels for enhanced movement. FIA 8856-2018 FAQs Q: Is this suit SFI or FIA certified?A: Yes! The Sabelt Hero TS-9 GT Pro is FIA 8856-2018, making it race-ready at any competition level. Q: How breathable is the suit?A: Thanks to strategically placed knit panels around the shoulders and back, the suit offers excellent ventilation, keeping you cool under pressure. Q: Can I machine wash it?A: We recommend dry cleaning to maintain its fire-resistant properties and overall durability. Ready to Race?With the Sabelt Hero TS-9 GT Pro Suit, you’re not just another driver—you’re a force to be reckoned with. Designed for the track and engineered for champions, this suit brings style, protection, and comfort to every race. Don’t wait—gear up now and leave your competitors in the dust!

SFI 3.2A/5 certified Sport Light Two-Piece Racing Suit, available in all-black or black/grey, designed for serious track performance.

Sparco S.p.A. Sparco Sport Light Jacket/Pants from $491.00

Sparco Sport Light Two-Piece Racing Suit Lightweight, Flexible, and Race-Ready Introducing the Sport Light Two-Piece Racing Suit, an evolution of the fan-favorite Pro Two-Piece. Crafted with lightweight and breathable Nomex construction, this suit keeps you cool and protected while you’re tearing up the track. With fully floating sleeves for enhanced mobility and an expandable waist for the perfect fit, you’ll forget you’re even wearing it. Whether you're opting for the jacket or pants, the double-layer sandwich design ensures superior fire protection with SFI 3.2A/5 approval. The suit’s available in all-black or black/grey, and both jacket and pants are sold separately. Sparco Sport Light Features Nomex construction: Lightweight, breathable, and fire-resistant for ultimate protection. Fully floating sleeves: Increased range of motion behind the wheel. Expandable waist and internal knitted cuffs: Unmatched fit and comfort. SFI 3.2A/5 approved: Certified protection for serious racers. Optional sewn-on arm restraints: Available for an additional $75 (no returns/exchanges with this option). Product Specifications Material: Lightweight Nomex construction Fit: Fully floating sleeves, internal knitted cuffs, and expandable waist Design: Available in all-black or black/grey Certification: SFI 3.2A/5 approved Options: Sewn-on arm restraints (+$75) Sparco Sport Light FAQs Q: Can I buy the jacket and pants separately?A: Yes! The jacket and pants are sold separately, giving you more flexibility to mix and match sizes. Q: Is the suit machine washable?A: We recommend dry cleaning to preserve the suit’s fire-resistant properties. Q: What does SFI 3.2A/5 certification mean?A: It means the suit meets rigorous fire protection standards for motorsports, ensuring you're safe while racing.