Auto Racing Driver Safety Gear at CMS – Page 23

Stilo ST6 Helmet Aero Kits from $102.00 $98.00

Stilo ST6 Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between front and rear aero, or both for the best performance!

A black Trac-Com Ear Bud Connector Helmet Clip designed for attaching to the side of a helmet.

Trac-Com Ear Bud Connector Helmet Clip $51.00

Trac-Com Ear Bud Connector Helmet Clip The Trac-Com Ear Bud Connector Clip was designed to securely attach the Trac-Com 3.5MM earbud connector onto the side of a helmet without the need for drilling. This innovative clip comes in two versions, one for carbon helmets and one for composite helmets, making it a versatile option for a variety of helmet types. While it fits many helmets, please note that it may not work with every model. Trac-Com Ear Bud Connector Clip Features Universal clip that works with most helmets Simple, secure fitment to your helmet No drilling required for installation Available in two versions for either carbon fiber or composite helmets

HANS IV Frontal Head Restraint $667.00

HANS IV Frontal Head Restraint Now offered in three different sizes and at a lower price, the Hans IV is a new and improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 - degree option, this FHR is perfect for the entry level driver across many race series. HANS Device 4 Head and Neck Restraints are the lightest HANS Sport Series device to date. HANS IV Frontal Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the fourth generation, HANS Device IV Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device IV Frontal Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS IV Frontal Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS IV is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most road racing, HPDE, Stock Cars, Modifieds, Drag, Legends, Bandalero cars. HANS IV HNR FeaturesS 10% Lighter than previous models SFI 38.1 certified Improved harness retention so belts will not slip Custom molded pads nest in the device to prevent pads from slipping. Foam is a perfect blend for comfort and support More available sizes to fit more drivers 3 Different Sizes – Small, Medium and Large The best price on a HANS device on the market Three different anchor options: Post Anchor (standard), Quick Click (SFI only), M61 (Sold Separately) Includes helmet post anchors Easy to use, no tether adjustment Offered in both SFI / FIA certification allowing drivers to use the product worldwide Unlike most entry level devices that are often bulky and uncomfortable; this new and improved design is lighter and more comfortable allowing drivers to focus. High collar cut away made to not contact the wearer’s neck in rear impacts HANS IV Sizing Chart HANS IV HNR FAQS I can touch my chin to my chest with the device on. Are my tethers too long? No. The HANS Device comes properly adjusted for all drivers. Unless you have changed the tether length it is fine and will work in an impact. When I put the device on, it rubs against my neck. Is that normal? Yes. The front of the HANS Device is narrower to accommodate arm movement. Padding can be modified or removed - it does not affect the device’s performance. What type of shoulder belts work best with a HANS Device? Any SFI or FIA approved harness system works with the HANS Device. Two inch or three inch belts, as well as 5-6 or more multi-point systems are all fine. Do shoulder belts slip off the HANS Device? Properly mounted belts do not slip off the device. If shoulder belts will not stay securely on the device, you may not have the belt mounts properly located in your chassis. I race on a short track at relatively low speeds. Do I need a HANS Device? Yes. Serious head and neck injuries happen at impact speeds as low as 35mph. On short tracks with tight turns it is easy to be turned almost straight into the wall. How do I care for my HANS device? HANS Devices need almost no maintenance but should be kept clean and dry. To protect them, HANS Devices should be stored out of direct sunlight. They may be cleaned with soapy warm water. Ensure rubber top surfaces stay clean and free of wear. Tethers should be replaced after any major impact or every 5 years. Tethers carry dated labels. Check your helmet anchors for tightness occasionally. What if my HANS Device is in an impact? HANS Devices should be inspected periodically or after any impacts. Examine your device in bright sunlight and run your finger around the edges. Any sign of de-lamination, cracking or exposed composite material means the device has served its purpose and should be replaced. How long are the SFI and FIA certifications acceptable? Different race series may have different rules regarding age of certifications. SFI 38.1 requires recertifying your HANS every 5 years, and FIA 8858 certifications do not expire. Check our website or your race sanctioning body for more information.

Stilo VENTI WRX Dirt Carbon racing helmet with carbon fiber shell, clear sealed visor, integrated communications and HANS posts

Stilo VENTI WRX Dirt Carbon Racing Helmet | Snell SA2020 / FIA 8859-2015 $2,897.00

Stilo VENTI WRX Dirt Carbon Racing Helmet The Stilo VENTI WRX Dirt Carbon is a purpose-built full-face racing helmet designed for demanding off-road, dirt, rally, Baja, Dakar, drifting, and extreme motorsport environments. Combining elements of Stilo's legendary VENTI WRC open-face helmet with the protection of the ST5 full-face platform, the WRX Dirt Carbon delivers exceptional visibility, protection, communications capability, and lightweight carbon-fiber construction. Designed specifically for drivers competing where dirt, dust, rocks, debris, and rapidly changing terrain are part of the race, the VENTI WRX Dirt Carbon features a significantly enlarged eyeport that provides approximately 34% more field of view. The expanded peripheral vision helps drivers maintain greater awareness of terrain, competitors, course markers, and obstacles without sacrificing full-face protection. A fully sealed visor helps keep dirt and debris outside the helmet, while integrated Stilo electronics make the WRX Dirt Carbon an excellent choice for rally and off-road applications where dependable driver-to-co-driver communication is essential. Built for Dirt, Rally, Baja and Extreme Racing Traditional full-face helmets can limit peripheral visibility, while open-face rally helmets provide less protection from debris. The Stilo VENTI WRX Dirt Carbon was developed to bridge that gap. Its enlarged opening gives the driver excellent outward visibility while retaining a full chin bar and sealed visor. This combination makes the WRX Dirt Carbon especially well suited for open-cockpit and harsh-environment racing where both visibility and protection are critical. 34% Increased Field of View One of the defining features of the VENTI WRX platform is its exceptionally large eyeport. Compared with a conventional full-face design, the WRX Dirt Carbon provides approximately 34% greater field of view. The increased peripheral visibility can be especially valuable when navigating tight rally stages, desert terrain, dirt tracks, Formula Drift competition, Baja racing, and other motorsports where drivers need to process their surroundings quickly. Carbon Fiber Construction The VENTI WRX Dirt Carbon uses a lightweight carbon-fiber shell engineered to provide an excellent balance of strength, rigidity, weight, and driver comfort. Reducing helmet weight can help decrease fatigue and neck loading during long races, rough terrain, high-G corners, and extended competition sessions. Sealed Full-Face Visor The WRX Dirt Carbon comes equipped with a full visor designed to create a protective barrier between the driver and the outside environment. The sealed visor is particularly useful in dirt and desert racing where dust, sand, mud, and debris can quickly become a major distraction. Full-face visor system Helps seal out dirt, dust, sand, and debris Large eyeport for increased peripheral visibility Clear shield included Tear-off compatible Stilo dual-lock visor closure system Integrated Stilo Communication Electronics The VENTI WRX Dirt Carbon is designed around Stilo's motorsport communication system and includes integrated helmet electronics with speakers and ear cups. This makes it an excellent platform for rally drivers, co-drivers, off-road racers, and other competitors who depend on clear in-car communications. The helmet electronics are integrated into the helmet itself. A compatible external Stilo intercom or communication system may still be required depending on your vehicle and application. Factory-Installed HANS Posts Factory-installed HANS posts are supplied as standard, allowing the helmet to be used with compatible head-and-neck restraint systems without requiring the driver to add anchor posts separately. Stilo VENTI WRX Dirt Carbon Features Lightweight carbon-fiber shell construction Snell SA2020 certified FIA 8859-2015 homologated Approximately 34% increased field of view Full-face protection with enlarged eyeport Designed specifically for dirt, rally, Baja, Dakar, drifting, and off-road competition Fully sealed full-face visor Clear visor included Tear-off compatible visor system Integrated Stilo communication electronics Integrated speakers and ear cups Factory-installed HANS posts Double D-ring chin strap Nomex interior Ventilated helmet design Stilo PURO technology Three-shell sizing system for improved fit and weight distribution Who Is the Stilo VENTI WRX Dirt Carbon For? The VENTI WRX Dirt Carbon is an excellent choice for racers competing in demanding environments where a traditional road-racing helmet may not provide enough visibility or protection from dirt and debris. Rally racing Baja racing Dakar-style rally raid competition Off-road racing Dirt track competition Formula Drift and drifting Open-cockpit race vehicles Side-by-side and extreme-terrain competition where permitted by sanctioning rules Stilo VENTI WRX Dirt Carbon Sizing Chart Stilo helmet sizing corresponds closely to head circumference in centimeters. Stilo helmets generally fit slightly snugger than some other helmet brands, so accurate measurement is important. Learn how to properly measure your head for a Stilo racing helmet. Stilo VENTI WRX Dirt Carbon FAQs Q: What certifications does the Stilo VENTI WRX Dirt Carbon have?A: This version of the VENTI WRX Dirt Carbon is certified to Snell SA2020 and FIA 8859-2015 standards. Q: Is the VENTI WRX Dirt Carbon a full-face helmet?A: Yes. It provides full-face protection while using an enlarged eyeport designed to significantly increase peripheral visibility. Q: How much more visibility does the WRX Dirt Carbon provide?A: Stilo designed the WRX platform to provide approximately 34% more field of view compared with a conventional full-face helmet design. Q: Does the helmet include a visor?A: Yes. The VENTI WRX Dirt Carbon includes a sealed clear full-face visor designed to help prevent dirt, dust, sand, and debris from entering the helmet. Q: Is the visor compatible with tear-offs?A: Yes. The visor is designed for use with tear-offs, making it especially useful for dirt and off-road competition. Q: Does the VENTI WRX Dirt Carbon include communications?A: The helmet includes integrated Stilo helmet electronics, speakers, and ear cups. A compatible external intercom or vehicle communication system may be required to complete your communication setup. Q: Are HANS posts included?A: Yes. Factory-installed HANS posts are supplied with the helmet as standard. Q: Is this helmet designed specifically for dirt racing?A: Yes. The WRX Dirt Carbon was developed specifically for demanding dirt, rally, Baja, rally raid, drifting, and off-road environments where increased visibility and protection from debris are important. Q: Can I use the VENTI WRX Dirt Carbon for karting?A: The VENTI WRX Dirt Carbon is an auto-racing helmet rather than a dedicated karting helmet. Always verify the helmet certification requirements of your specific karting organization or racing series before use. Q: How should a Stilo helmet fit?A: A Stilo helmet should fit snugly and evenly around the entire head without uncomfortable pressure points. The helmet should remain firmly in position when you move your head and should not rotate excessively. Why Choose the Stilo VENTI WRX Dirt Carbon? The Stilo VENTI WRX Dirt Carbon combines the visibility racers love about an open-face rally helmet with the added coverage of a full-face design. Its lightweight carbon-fiber construction, sealed visor, integrated communications, factory-installed HANS posts, and dramatically expanded field of view make it one of Stilo's most specialized helmets for serious dirt and off-road competition. For drivers competing in environments where visibility, communications, debris protection, and comfort all matter, the VENTI WRX Dirt Carbon provides a purpose-built solution designed for the harshest stages and toughest race conditions. This helmet will ship with signature required for delivery.

Stilo VENTI WRX Dirt Carbon Zero Helmet in carbon fiber front-left three-quarter view

Stilo VENTI WRX Dirt Carbon Zero Helmet | FIA 8860 $6,662.00

Stilo VENTI WRX Dirt Carbon Zero Helmet The Stilo VENTI WRX Dirt Carbon Zero Helmet is Stilo's premium full-face solution for serious off-road, rally raid, SSV, buggy, and open-vehicle competition. Purpose-built for extreme environments, the WRX Dirt combines an exceptionally wide eyeport, sealed full visor, integrated communications, lightweight Carbon Zero construction, and FIA 8860-2018 protection. Stilo developed the VENTI WRX by combining key strengths of its rally-focused VENTI platform with the full-face protection of its circuit racing helmets. The result is a helmet designed around the unique demands of drivers racing through dust, dirt, mud, heat, rough terrain, and constantly changing conditions. FIA 8860-2018 Carbon Zero Protection The VENTI WRX Dirt Carbon Zero is the highest-performance version of the WRX Dirt platform and is designed for drivers who require FIA 8860-2018 homologation. The Zero version uses Stilo's higher-tensile carbon fiber construction, providing an exceptionally strong shell while keeping overall helmet weight and bulk under control. For competitors racing internationally or in series requiring FIA 8860 certification, the Carbon Zero is the premium WRX Dirt configuration. Purpose-Built for Dirt and Rally Raid The VENTI WRX was not simply adapted from a traditional road-racing helmet. Stilo engineered the platform specifically for raid and off-road competition after working with drivers and teams competing in some of the world's harshest racing environments. The WRX Dirt configuration is specifically designed around open vehicles where the driver is exposed to dust, dirt, rocks, mud, and other debris. Its fully sealed visor provides the coverage of a full-face helmet while maintaining the exceptionally broad visibility needed to read terrain and react quickly. 34% Wider Field of View Visibility is one of the biggest advantages of the Stilo VENTI WRX. Stilo designed the eyeport to provide a 34% increase in field of view compared with the ST5 range. The enlarged opening provides excellent peripheral vision, helping drivers see obstacles, terrain changes, corner entrances, other vehicles, course markers, and the surrounding environment without unnecessary head movement. Despite the dramatically larger opening, the VENTI WRX remains a certified full-face helmet. High-Tensile Carbon Zero Shell Stilo offers the WRX platform in both Carbon and Carbon Zero configurations. The standard Carbon model uses a medium-tensile carbon fiber weave, while the Carbon Zero uses a higher-tensile carbon construction for increased performance. The Zero is the lightest and highest-performing version of the VENTI WRX family and is the model intended for FIA 8860-level competition. Stilo PURO Technology The VENTI WRX Carbon Zero uses Stilo's PURO Super Smooth technology. This manufacturing process produces a high-quality finished carbon surface without requiring the traditional heavy lacquer layer commonly applied to carbon helmets. Eliminating unnecessary clear coat helps reduce weight while also making the helmet more convenient for professional custom painters. Factory graphics are not buried underneath a thick lacquer finish, simplifying preparation for custom helmet designs. Fully Sealed Dirt Visor The WRX Dirt uses a fully sealed visor designed specifically for exposed and debris-heavy environments. The visor helps keep dirt, dust, mud, and other material away from the driver's face and eyes while maintaining a large, clear viewing area. This sealed configuration is one of the primary differences between the WRX Dirt and WRX Raid models. Integrated Rally Communications Communication is built into the VENTI WRX platform rather than treated as an afterthought. The helmet is designed with integrated side ports and comes communication-ready with ear cups and built-in speakers. The system can be used with compatible Stilo intercom equipment, while available adapters allow integration with other communication and radio systems. For driver and co-driver teams, this creates a cleaner installation with fewer loose wires and less equipment competing for space inside the helmet. Top Ventilation for Extreme Conditions Top ventilation openings help move heat and moisture away from the driver's head during demanding race conditions. The top ventilation system can also accommodate compatible Stilo Short Top Air components, providing racers with additional cooling options when their vehicle setup supports forced-air helmet systems. Pre-Installed HANS Posts The VENTI WRX comes with HANS/FHR posts pre-installed, making it ready for use with a compatible Head and Neck Restraint system. This factory-integrated setup eliminates the need to separately install helmet anchors before preparing the helmet for competition. Three-Shell Construction for Better Fit Stilo designed the VENTI WRX around three shell sizes to help place each driver into the smallest and lightest shell appropriate for their head size. Interchangeable cheek pads and top pads also allow the helmet interior to be fine-tuned, giving drivers additional flexibility when dialing in fit and comfort. Extensive WRX Accessory System The VENTI WRX platform was engineered to be highly configurable. Genuine Stilo accessories allow the helmet to be tailored to the driver's vehicle, conditions, communication setup, and personal preferences. Available WRX accessories include alternate full visors, tinted and mirrored visor options, tear-offs, air systems, communication components, peaks, visor fitting hardware, and other competition equipment. Stilo VENTI WRX Dirt Carbon Zero Features FIA 8860-2018 homologation Premium Carbon Zero construction High-tensile carbon fiber weave Stilo PURO Super Smooth technology Purpose-built for off-road and rally raid competition Designed specifically for open vehicles Certified full-face helmet construction 34% wider field of view compared with the ST5 range Fully sealed Dirt visor Integrated communication side ports Ear cups and integrated speakers Pre-installed HANS/FHR posts Top ventilation openings Compatible with available Stilo Short Top Air systems Three shell sizes for optimized fit and weight Interchangeable cheek and top padding Multiple optional visor finishes and accessories available VENTI WRX Dirt vs. VENTI WRX Raid The VENTI WRX Dirt and VENTI WRX Raid share the same wide-vision WRX platform but are configured for different environments. The WRX Dirt is designed specifically for open vehicles and uses a fully sealed full visor to maximize protection from dirt and debris. The WRX Raid is aimed primarily at closed vehicles and can be configured with a short visor and adjustable peak. For an open buggy, SSV, rally raid vehicle, or other application where the driver's face is exposed to the environment, the WRX Dirt is the more protective configuration. VENTI WRX Carbon Zero vs. Carbon The WRX Carbon uses Stilo's medium-tensile carbon fiber construction, while the WRX Carbon Zero steps up to a higher-tensile carbon weave and is positioned as the lighter, higher-performance version of the helmet. The Carbon Zero is also the WRX configuration to choose when FIA 8860 homologation is required. Why the WRX Dirt Eyeport Matters Off-Road Off-road drivers need to process considerably more than a conventional racing line. Terrain changes, rocks, ruts, course markers, competitors, and obstacles can appear from multiple directions. The VENTI WRX's exceptionally large eyeport gives the driver more peripheral information without sacrificing the coverage of a full-face design. That combination is what separates the WRX from a conventional closed-cockpit racing helmet. Getting the Proper Stilo Helmet Fit A racing helmet should fit firmly and evenly around the entire head. It should not move independently when the driver turns or shakes their head, but it should also avoid concentrated pressure points that become painful during longer sessions. Use a flexible measuring tape around the widest part of the head, approximately one inch above the eyebrows and around the back of the skull. Take the measurement two or three times and use the largest consistent measurement when comparing your head circumference with the Stilo sizing chart. Stilo VENTI WRX Dirt Carbon Zero Helmet Sizing Chart Questions & Answers What certification does the Stilo VENTI WRX Dirt Carbon Zero have?The VENTI WRX Dirt Carbon Zero is the FIA 8860-2018 version of the WRX Dirt platform and is designed for high-level motorsport competition requiring FIA 8860 homologation. What is special about the Carbon Zero version?The Carbon Zero uses Stilo's higher-tensile carbon fiber construction and is positioned as the lightest and highest-performing version of the WRX family. How much more visibility does the VENTI WRX provide?Stilo states that the WRX provides a 34% increase in field of view compared with the ST5 helmet range. Is the VENTI WRX Dirt a full-face helmet?Yes. Despite its extremely large eyeport, the WRX is designed, tested, and certified as a full-face helmet. What is the difference between the WRX Dirt and WRX Raid?The WRX Dirt is intended for open vehicles and uses a fully sealed visor for protection from dirt and debris. The WRX Raid is primarily designed for closed vehicles and can be configured with a short visor and peak. Does the WRX Dirt include communications?The VENTI WRX platform includes integrated communication provisions with ear cups, built-in speakers, and side ports for connection to compatible Stilo intercom or radio equipment. Does the helmet come with HANS anchors?Yes. HANS/FHR posts are pre-installed on the VENTI WRX. Can I use a forced-air system with the WRX Dirt?Yes. The helmet's top ventilation openings can be used with compatible Stilo Short Top Air components. Are replacement visors available?Yes. Stilo offers WRX Dirt full visors in several configurations, including clear, smoked, mirrored, and colored iridium options. Can the interior fit be adjusted?Yes. The WRX uses interchangeable cheek and top pads, allowing the interior fit to be fine-tuned when the correct shell size has been selected. Is the Carbon Zero different from the standard WRX Carbon?Yes. The standard Carbon uses a medium-tensile carbon weave, while the Carbon Zero uses Stilo's higher-tensile carbon construction and is the FIA 8860 version of the WRX platform. Is the WRX Dirt designed specifically for dusty conditions?Yes. The sealed full visor and full-face construction are specifically intended to protect the driver in demanding dirt, dust, mud, and debris-heavy environments. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.

Stilo Venti4 WRC Carbon Fiber SA2025 racing helmet front-right product image on white background

Stilo Venti WRX Raid Carbon | FIA 8859-2015 & SA2020 $2,897.00

Stilo Venti WRX Raid Carbon Racing Helmet The Stilo Venti WRX Raid Carbon Racing Helmet is purpose-built for off-road, rally raid, Baja, side-by-side and extreme dirt competition. Developed as a hybrid between Stilo's championship-proven Venti WRC open-face platform and ST5 full-face helmet architecture, the Venti WRX Raid combines a massive eye opening, protective full-face shell and goggle-compatible design for racers operating in dust, heat and demanding terrain. Constructed from carbon fiber using Stilo's PURO technology, the Venti WRX Raid Carbon delivers lightweight performance with Snell SA2020 and FIA 8859-2015 certification. A short carbon peak, 34% increased field of view and communication-ready interior make it a serious helmet for drivers and co-drivers who need maximum awareness in extreme environments. Built for Rally Raid, Baja and Off-Road Racing The Venti WRX Raid was designed specifically for racing environments where dust, debris, visibility and communication can become just as important as outright speed. Its unique architecture blends the protection of a full-face helmet with the expansive opening and visibility associated with Stilo's rally helmets. Whether used in a side-by-side, open off-road vehicle, desert racer or rally raid car, the WRX Raid is engineered around the demands of rough terrain and extended competition. 34% Increased Field of View One of the defining features of the Stilo Venti WRX platform is its dramatically enlarged eye opening. Stilo rates the design as providing a 34% increase in field of view, giving drivers improved peripheral vision and a clearer view of terrain, obstacles, cockpit equipment and co-drivers. The increased opening is especially useful in off-road competition, where terrain can change rapidly and maintaining awareness of hazards is critical. Designed for Off-Road Goggles The Raid configuration is specifically designed to accommodate a variety of off-road racing goggles. Instead of a conventional full-face visor, the helmet uses a large open eyeport paired with a short peak. This setup allows racers to select goggles appropriate for dusty, muddy or changing weather conditions while retaining the protection of the surrounding carbon fiber helmet shell. Carbon Fiber Shell With Stilo PURO Technology The Venti WRX Raid Carbon uses Stilo's PURO carbon fiber manufacturing technology. The process minimizes unnecessary finishing materials and coatings to help reduce mass while maintaining the strength and premium finish required for motorsport use. The result is a lightweight carbon helmet designed to help reduce driver fatigue during long stages, endurance events and demanding off-road competition. Snell SA2020 and FIA 8859-2015 Certified The Venti WRX Raid Carbon carries both Snell SA2020 certification and FIA 8859-2015 homologation, giving racers a helmet built to recognized international motorsport safety standards. It is also compatible with approved head and neck restraint systems for additional protection in competitive motorsport applications. Short Carbon Peak for Off-Road Visibility The Raid version includes a short peak designed to help manage glare and overhead light while maintaining the helmet's exceptionally large field of view. Its compact design also provides clearance for compatible off-road goggles. Additional WRX peaks and accessories can be used to further configure the helmet for specific racing environments. Communication System Ready The Venti WRX Raid Carbon is designed to accommodate motorsport communication equipment and includes speaker provisions within the interior. Compatible Stilo communication components can be added separately depending on the driver's vehicle intercom and communication requirements. This makes the helmet well suited to rally raid and endurance environments where reliable communication between driver, co-driver and crew is essential. Stilo Venti WRX Raid Carbon Helmet Features Snell SA2020 certified FIA 8859-2015 homologated Carbon fiber shell construction Stilo PURO carbon technology Developed for rally raid, Baja, side-by-side and off-road racing Hybrid design inspired by the Venti WRC and ST5 platforms 34% increased field of view Large goggle-compatible eye opening Designed to work with a variety of off-road goggles Short racing peak included No conventional full-face visor installed Speaker compatible Speaker cutouts integrated into the interior Compatible with optional Stilo communication equipment Head and neck restraint compatible Double D-ring chin strap Black Nomex interior Ventilated helmet design Helmet bag included Stilo Venti WRX Raid Carbon Helmet Details Manufacturer: Stilo Helmets Model: Venti WRX Raid Carbon Manufacturer Part Number Family: AA0232BG1T Helmet Type: Full-face off-road and auto racing helmet Outer Shell Material: Carbon fiber Finish: Gloss carbon Certification: Snell SA2020 FIA Homologation: FIA 8859-2015 Field of View: 34% increased compared with the referenced Stilo platform Face Shield Included: No Goggle Compatible: Yes Short Peak: Included Communication Ready: Yes Integrated Communications Included: No, available separately Speaker Compatible: Yes Head and Neck Restraint Compatible: Yes Helmet Bag: Included Raid Version vs. Venti WRX Dirt The Venti WRX family is designed around demanding off-road competition, but the Raid configuration is optimized specifically for drivers who prefer goggles. Its large open eyeport, short peak and no-visor configuration provide maximum compatibility with off-road eyewear. This makes the Venti WRX Raid particularly well suited to desert racing, Baja, Dakar-style rally raid, UTV and other environments where dust management and peripheral visibility are major priorities. Stilo Venti WRX Raid Carbon Helmet Sizing Chart Measure around the largest part of your head approximately one inch above your eyebrows and around the widest point at the back of your head. Take several measurements and use the largest result when selecting your Stilo helmet size. Stilo Venti WRX Raid Carbon Helmet FAQs Is the Stilo Venti WRX Raid Carbon Snell certified?Yes. This version of the Venti WRX Raid Carbon carries Snell SA2020 certification. Is the Venti WRX Raid Carbon FIA homologated?Yes. The helmet is homologated to FIA 8859-2015. Is the Venti WRX Raid designed for goggles?Yes. The Raid version is specifically designed around a large eye opening that accommodates a variety of off-road racing goggles. Does the Venti WRX Raid include a visor?No. The Raid configuration uses a short peak and open goggle-compatible eyeport rather than a conventional full-face visor. How much more visibility does the Venti WRX provide?Stilo states that the WRX design provides a 34% increase in field of view, improving peripheral visibility in demanding racing environments. What type of racing is the Venti WRX Raid designed for?It is particularly well suited to rally raid, desert racing, Baja competition, UTV and side-by-side racing, dirt racing and other extreme off-road applications. Does the helmet include communications?The helmet is communication-ready and includes speaker provisions, but Stilo lists the integrated intercom system as sold separately. Compatible communication equipment can be added based on the vehicle's intercom setup. Is the Venti WRX Raid compatible with a head and neck restraint?Yes. The helmet is designed for use with compatible head and neck restraint systems. Does the helmet include a helmet bag?Yes. Stilo lists a helmet bag as included with the Venti WRX Raid Carbon. How should I choose my Stilo Venti WRX Raid size?Measure your head circumference approximately one inch above your eyebrows and around the largest point at the back of your head. Compare the largest measurement with the Venti WRX Raid-specific sizing chart before selecting a size. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.

Stilo VENTI WRX Raid Carbon Zero Helmet in carbon fiber front-left three-quarter view

Stilo Venti WRX Raid Carbon Zero FIA 8860 $6,590.00

Stilo VENTI WRX Raid Carbon Zero Helmet The Stilo VENTI WRX Raid Carbon Zero Helmet is Stilo's premium full-face rally raid and off-road helmet engineered for drivers and co-drivers competing in demanding closed-vehicle environments. Combining the wide visibility of the VENTI rally platform with the protection of a full-face helmet, the WRX Raid delivers exceptional peripheral vision, lightweight Carbon Zero construction, integrated communications, and FIA 8860-level protection. Designed specifically for rally raid, off-road racing, SSVs, buggies, and other extreme motorsport applications, the VENTI WRX platform was developed to handle environments where heat, dust, rough terrain, long stages, and constant communication place unique demands on the driver and equipment. FIA 8860 Carbon Zero Protection The VENTI WRX Raid Carbon Zero is the highest-performance version of Stilo's WRX Raid platform. The Carbon Zero construction uses a higher-tensile carbon fiber weave and is the WRX configuration intended for competitors who require FIA 8860 homologation. This premium carbon construction provides the strength required for professional motorsport while controlling helmet weight and overall shell size, making the Carbon Zero an excellent choice for long-duration rally raid and off-road competition. Purpose-Built for Rally Raid and Closed Vehicles The WRX Raid is specifically configured for closed-cockpit rally raid and off-road vehicles. Instead of the sealed full visor used on the WRX Dirt, the Raid configuration uses a short peak and an open eyeport designed to work with off-road or motocross-style goggles. This setup gives drivers the flexibility to choose goggles appropriate for dust, changing light, heat, and demanding desert or trail conditions while maintaining the full-face protection of the WRX helmet platform. 34% Wider Field of View One of the biggest advantages of the Stilo VENTI WRX is its exceptionally large eyeport. Stilo engineered the WRX to provide a 34% increase in field of view compared with the ST5 helmet range. The expanded opening improves peripheral visibility and allows the driver to see more of the cockpit, terrain, obstacles, corners, course markers, and surrounding vehicles without excessive head movement. The eyeport is also large enough to accommodate popular off-road and motocross goggles, making it particularly useful for rally raid and SSV competition. Goggle-Compatible Raid Design The VENTI WRX Raid is designed specifically around goggle use. Its large eyeport provides the room needed for off-road goggles while the short peak helps reduce glare and provides additional protection from overhead light and debris. For racers who prefer a short visor rather than goggles, compatible WRX short visor options are also available, allowing the helmet to be configured around the driver's preferred setup. High-Tensile Carbon Zero Shell The standard VENTI WRX Carbon uses a medium-tensile carbon fiber weave, while the Carbon Zero steps up to Stilo's higher-tensile carbon construction. The result is Stilo's lightest and highest-performing WRX configuration, developed for competitors who want maximum performance from the platform while meeting the requirements of FIA 8860 competition. Stilo PURO Super Smooth Technology The WRX Carbon Zero uses Stilo's PURO Super Smooth technology. This construction process creates a high-quality finished carbon surface without requiring a conventional heavy lacquer layer. Eliminating unnecessary clear coat helps reduce weight and also makes the helmet easier for professional painters to prepare for custom graphics because factory decals are not buried beneath a traditional lacquer finish. Integrated Rally Communications The VENTI WRX was engineered around communications from the beginning. The helmet features integrated side ports and comes with Stilo's rally communication equipment, including ear cups and built-in speakers. The system can connect to compatible Stilo intercoms, while available adapters allow the helmet to be integrated with a variety of other motorsport radio and communication systems. For driver and co-driver teams, this integrated setup creates a cleaner installation with fewer loose wires and less equipment competing for space inside the helmet. Pre-Installed HANS Posts The VENTI WRX comes with HANS/FHR posts pre-installed, allowing the helmet to be used with a compatible Head and Neck Restraint system without requiring separate helmet anchor installation. Top Ventilation for Long Rally Stages Top ventilation openings help reduce heat and moisture buildup inside the helmet during long and physically demanding rally stages. The top ventilation openings are also designed to accommodate the compatible Stilo Short Top Air System, giving drivers the option of adding forced-air cooling when their vehicle setup allows it. Side Air System Compatibility The VENTI WRX Raid can also be configured with Stilo's available Side Air system. This gives racers another way to route forced air into the helmet depending on cockpit configuration and available vehicle equipment. The ability to choose between multiple cooling configurations makes the WRX Raid particularly adaptable for long-duration desert and rally raid competition. Drinking System Compatibility Stilo designed the WRX Raid to accommodate an available drinking system, allowing drivers to integrate hydration equipment directly into their race setup. For endurance-style events such as rally raid and long off-road stages, integrated hydration capability can help reduce distractions and make it easier for drivers to stay hydrated without removing safety equipment. Three Shell Sizes for a Better Fit The VENTI WRX platform is manufactured using three shell sizes rather than forcing every helmet size into the same outer shell. This allows Stilo to keep the exterior dimensions and weight better matched to the driver's actual head size. Interchangeable cheek pads and top pads also allow the interior fit to be fine-tuned for improved comfort and stability. Designed for Extreme Motorsport Conditions The WRX platform was developed specifically around the requirements of modern rally raid and off-road competition. Drivers may spend hours dealing with vibration, heat, rough terrain, dust, navigation, communication, and constant changes in visibility. The combination of a large eyeport, full-face protection, integrated communications, lightweight carbon construction, cooling-system compatibility, and hydration options makes the VENTI WRX Raid particularly well suited to these demanding environments. Stilo VENTI WRX Raid Carbon Zero Features FIA 8860 homologation Premium Carbon Zero construction High-tensile carbon fiber weave Stilo PURO Super Smooth technology Purpose-built for rally raid and off-road competition Designed primarily for closed vehicles Certified full-face helmet construction 34% wider field of view compared with the ST5 range Large goggle-compatible eyeport Short peak Raid configuration Compatible WRX short visor options available Integrated communication side ports Integrated ear cups and speakers Pre-installed HANS/FHR posts Top ventilation openings Compatible with Stilo Short Top Air systems Side Air system available Drinking system available Three shell sizes for optimized fit and weight Interchangeable cheek pads and top pads Wide range of WRX accessories available VENTI WRX Raid vs. VENTI WRX Dirt The VENTI WRX Raid and VENTI WRX Dirt share the same wide-vision WRX foundation but are configured for different types of vehicles and racing environments. The WRX Raid is designed primarily for closed vehicles and uses a short peak with an open, goggle-compatible eyeport. The WRX Dirt is intended primarily for open vehicles and uses a fully sealed full visor to provide increased protection from dirt, dust, mud, and flying debris. For drivers competing inside an enclosed rally raid vehicle who prefer goggles or the flexibility of a short visor and peak, the WRX Raid is the purpose-built configuration. VENTI WRX Carbon Zero vs. Carbon The standard WRX Carbon uses Stilo's medium-tensile carbon fiber weave, while the WRX Carbon Zero uses a higher-tensile carbon construction. The Carbon Zero is the lightest and highest-performing version of the WRX platform and is the model intended for international competition where FIA 8860 homologation is required. Why the Wide Eyeport Matters in Rally Raid Rally raid drivers must process considerably more visual information than a conventional racing line. Terrain changes, navigation markers, obstacles, competitors, cockpit instruments, and course hazards can all require immediate attention. The VENTI WRX's large eyeport increases peripheral visibility and reduces the amount of head movement required to see the surrounding environment. This is especially useful during technical off-road stages where conditions can change rapidly. WRX Accessory Compatibility Stilo developed the WRX as a highly configurable helmet system. Available accessories allow the Raid to be tailored around the driver's vehicle, weather conditions, communication equipment, cooling setup, and personal preferences. Compatible equipment includes short and extended peaks, short visors in multiple finishes, air systems, drinking systems, communication components, tear-offs, and additional WRX-specific hardware. Getting the Proper Stilo Helmet Fit A properly fitted racing helmet should feel firm and even around the entire head without excessive movement or isolated pressure points. Use a flexible measuring tape around the widest portion of the head, approximately one inch above the eyebrows and around the back of the skull. Take the measurement two or three times and use the largest consistent measurement when comparing your head circumference with the Stilo helmet sizing chart. Sizing Chart Questions & Answers What certification does the Stilo VENTI WRX Raid Carbon Zero have?The Carbon Zero is the WRX version intended for FIA 8860 competition and is designed for racers who require Stilo's highest-performance WRX construction. What is the difference between the WRX Raid and WRX Dirt?The WRX Raid is primarily designed for closed vehicles and uses a short peak with a goggle-compatible eyeport. The WRX Dirt is designed primarily for open vehicles and features a fully sealed full visor. Does the VENTI WRX Raid use goggles?Yes. The Raid configuration is specifically designed to work with off-road or motocross-style goggles. Can I use a visor instead of goggles?Yes. Stilo offers compatible WRX short visor options in several finishes, allowing the Raid to be configured without goggles when preferred. How much more visibility does the WRX provide?Stilo states that the VENTI WRX provides a 34% increase in field of view compared with the ST5 helmet range. Does the WRX Raid include communications?Yes. The WRX platform comes communication-ready with integrated side ports, ear cups, and built-in speakers for use with compatible Stilo intercoms or other radio systems through available adapters. Does the helmet come with HANS anchors?Yes. HANS/FHR posts are pre-installed on the VENTI WRX. Can the VENTI WRX Raid use a forced-air system?Yes. The helmet supports compatible Stilo Short Top Air equipment and can also be configured with available Side Air components. Can a drinking system be installed?Yes. Stilo offers drinking-system equipment compatible with the WRX Raid platform. What is PURO technology?Stilo's PURO Super Smooth manufacturing process creates a finished carbon surface without requiring a conventional heavy lacquer layer, helping reduce unnecessary weight. What is the difference between Carbon and Carbon Zero?The standard WRX Carbon uses a medium-tensile carbon fiber weave, while the Carbon Zero uses a higher-tensile weave and is the WRX version intended for FIA 8860 competition. Can the interior fit be adjusted?Yes. The VENTI WRX uses interchangeable cheek pads and top pads to help fine-tune fit after the correct helmet and shell size have been selected. Is the WRX Raid only for rally raid?No. Although it was specifically developed for raid and off-road competition, the wide field of view and configurable WRX platform can also make it useful for other motorsport applications where visibility, communications, and flexible accessory configurations are important. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sabelt TS-8 blue race suit half image with white shoulder panels, red accents, black cuffs, and clean white background.

Sabelt Universe TS-8 Driver Race Suit from $2,028.00

Sabelt Universe TS-8 Driver Race Suit The Sabelt Universe TS-8 Driver Race Suit is built for serious drivers who want premium safety, comfort, and professional motorsport style in one lightweight package. Made in Italy from 100% Nomex fabric, this two-layer racing suit is FIA 8856-2018 homologated and designed for excellent mobility, breathability, and protection during demanding race conditions. Sabelt Universe TS-8 Driver Race Suit Features FIA 8856-2018 homologation for current international motorsport safety compliance. Available with SFI 3.2A/5 and SFI 3.4 certification by special request. 100% Nomex construction provides trusted fire-resistant protection. Lightweight two-layer design with approximately 310g/m² fabric weight. Breathable ergonomic material helps improve comfort during long sessions. Integrated bi-stretch panels support flexibility and a slim, tailored fit. Full floating sleeves and pre-curved arms help reduce bunching while driving. Ultrathin stitching improves comfort and gives the suit a clean professional finish. Lateral pockets provide convenient storage without disrupting the suit’s fit. Lightweight cuffs, lower neck collar, and YKK 3T zipper add comfort and durability. Embroidered Sabelt logos complete the refined race-ready appearance. Built for Professional-Level Comfort and Mobility The Sabelt Universe TS-8 is engineered to feel light, flexible, and comfortable when seated in the car. Full floating sleeves, anti-bunching pre-curved arms, and bi-stretch elastic panels help drivers move naturally through steering, shifting, and cockpit adjustments. The lower neck collar and lightweight cuffs reduce restriction, making the suit easier to wear during long race weekends. Sabelt Universe TS-8 Driver Race Suit Specifications Manufacturer: Sabelt Model: Universe TS-8 Certification: FIA 8856-2018 Optional Certification: SFI 3.2A/5 and SFI 3.4 by special request Material: 100% Nomex Layers: 2 Fabric Weight: 310g/m² Fit: Slim fit Zipper: YKK 3T Available Sizes: 44-66 Available Colors: White, Red, Black, and Blue Sabelt Universe TS-8 Driver Race Suit FAQs Is the Sabelt Universe TS-8 FIA approved?Yes. The Sabelt Universe TS-8 Driver Race Suit is FIA 8856-2018 homologated for current motorsport safety requirements. Can the Sabelt Universe TS-8 be ordered with SFI certification?Yes. The Universe TS-8 is available with SFI 3.2A/5 and SFI 3.4 certification by special request. What material is the Sabelt Universe TS-8 made from?The suit is made from 100% Nomex fabric, which is widely used in motorsports for its fire-resistant performance. Is the Sabelt Universe TS-8 a slim-fit suit?Yes. The Universe TS-8 uses a slim-fit design with ultrathin stitching and bi-stretch panels for a tailored feel without sacrificing driver mobility. Does the Sabelt Universe TS-8 help with movement in the car?Yes. Full floating sleeves, pre-curved arms, and elastic stretch panels help reduce restriction and bunching while seated in the cockpit. What sizes are available for the Sabelt Universe TS-8?The Sabelt Universe TS-8 Driver Race Suit is available in sizes 44 through 66. Choose the Sabelt Universe TS-8 Driver Race Suit for premium Italian craftsmanship, FIA-approved protection, and the lightweight comfort serious drivers need on race day.

Sparco Gulf Racing Driver Suit $1,824.00

Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)

Sparco Gulf Racing Top Shoes $433.00

Sparco Gulf Racing Top Shoe The Sparco Gulf Racing Top Shoe brings the iconic Gulf Racing livery into modern FIA-approved motorsport footwear. Inspired by the golden years of endurance racing, this reproduction combines classic Gulf Racing style with updated Sparco technology for today’s drivers. Built with a high-quality suede upper, Gulf Racing embroidery, breathable lining, and an adjustable ankle strap, the Sparco Gulf Racing Top Shoe delivers comfort, support, and authentic motorsport heritage. The anti-static, fuel-resistant, and oil-resistant sole provides dependable grip and pedal feel for track use. Sparco Gulf Racing Top Shoe Features FIA 8856-2018 approved for motorsport competition use. Official Gulf Racing-inspired reproduction design. Classic Gulf Racing embroidery and stripe detailing. High-quality suede upper for comfort and durability. Wide adjustable Velcro ankle strap improves support and fit. Breathable lining helps improve comfort during long sessions. Balance point at the heel improves driving sensitivity. Sole design supports both pedal grip and overall comfort. Anti-static, fuel-resistant, and oil-resistant outer sole. Anti-slip sole technology improves pedal feel. Available in blue. Available in sizes 37 through 48. Classic Gulf Racing Style The Sparco Gulf Racing Top Shoe features embroidered Gulf Racing details that pay tribute to one of motorsport’s most recognizable liveries. The blue suede upper, orange and white stripe accents, and Gulf logo styling make this shoe a standout choice for drivers and fans who want heritage-inspired race gear with modern protection. Modern FIA-Approved Protection While the design honors original Sparco Gulf Racing products, the construction has been updated with current Sparco technology and FIA 8856-2018 homologation. This gives drivers the classic look they want with the safety standard required for modern competition. Suede Upper with Adjustable Ankle Strap The high-quality suede upper provides a soft, comfortable feel while maintaining durability for racing use. A wide Velcro ankle strap adds support and helps secure the shoe around the foot for a confident fit during braking, throttle application, and pedal transitions. Breathable Comfort The breathable lining improves comfort compared to older traditional race shoe designs. This helps reduce heat buildup and supports driver focus during longer sessions, warm track days, and race weekends. Pedal Grip and Driving Feel The sole is designed to balance comfort with pedal grip. Anti-slip technology and a balance point at the heel help improve driving sensitivity, while the anti-static, fuel-resistant, and oil-resistant construction is built for motorsport environments. Sparco Gulf Racing Top Shoe Specifications Manufacturer: Sparco Part Number: 001287GU Approval: FIA 8856-2018 Upper Material: Suede Lining: Breathable lining Closure: Adjustable Velcro ankle strap with laces Sole: Anti-static, fuel-resistant, and oil-resistant Design Details: Gulf Racing embroidery and classic stripe accents Weight: 385 g / 0.85 lb Color: Blue Sizes: 37 to 48 Sparco Gulf Racing Top Shoe Sizing Chart Sparco Gulf Racing Top Shoe FAQs Is the Sparco Gulf Racing Top Shoe FIA approved?Yes. The Sparco Gulf Racing Top Shoe is FIA 8856-2018 approved for motorsport competition use. Is this part of the Gulf Racing reproduction collection?Yes. This shoe is part of the renewed Sparco and Gulf Racing partnership, bringing the historic Gulf Racing livery to modern Sparco race gear. What material is the upper made from?The Sparco Gulf Racing Top Shoe uses a high-quality suede upper with Gulf Racing embroidery. Does the shoe have ankle support?Yes. It features a wide adjustable Velcro ankle strap for added support, fit, and hold. Is the sole oil and fuel resistant?Yes. The outer sole is anti-static, fuel resistant, and oil resistant, making it suitable for racing and paddock environments. What sizes are available?The Sparco Gulf Racing Top Shoe is available in sizes 37 through 48.

Sparco Gulf white Nomex racing glove facing right on a white background

Sparco Land Gulf Racing Nomex Gloves | FIA 8856-2018 $210.00

Sparco Land Gulf Racing Nomex Gloves The Sparco Land Gulf Racing Nomex Gloves combine classic endurance-racing style with modern fire-resistant protection. Inspired by the historic partnership between Sparco and Gulf Racing, these gloves recreate the clean, unmistakable appearance of period motorsport equipment while meeting current FIA 8856-2018 requirements. Period-correct embroidered Gulf Racing and Sparco patches give the gloves an authentic heritage look. Beneath the vintage styling, a single-panel aramid construction, reinforced ergonomic palm, suede grip surfaces, and elastic wrist support provide the control and comfort required for modern competition. Available in Navy or White, the Sparco Land Gulf Racing glove is designed for drivers who want FIA-approved protection with genuine endurance-racing character. Gulf Racing Heritage Styling The Gulf Racing Land glove celebrates one of motorsport’s most recognizable liveries. Its embroidered Gulf Racing emblem and Sparco badge reproduce the appearance of classic racing equipment associated with historic endurance competition. Unlike a simple printed graphic, the embroidered patches provide added texture and a more authentic period-correct presentation. The understated design pairs especially well with historic race cars, Gulf-liveried vehicles, vintage driving suits, and heritage-inspired motorsport builds. Modern Protection Beneath the Classic Design Although the glove’s appearance is rooted in racing history, its protective construction has been updated for current competition. Fire-resistant aramid material provides modern heat and flame protection while preserving the flexible feel expected from a traditional racing glove. The Sparco Land Gulf Racing glove is approved to FIA 8856-2018, allowing drivers to enjoy vintage styling without relying on outdated safety equipment. Single-Panel Aramid Construction The glove body uses a high-strength, fire-resistant aramid fabric formed into a streamlined single-panel design. Reducing unnecessary seams and material transitions creates a smooth feel across the hand and helps minimize bunching during prolonged steering-wheel contact. The flexible construction follows the movement of the hand while maintaining the coverage required for competitive motorsport use. Ergonomic Reinforced Palm The palm is shaped to follow the natural position of the hand around the steering wheel. Reinforced stitching helps the glove maintain its fit through repeated steering inputs while supporting durability in high-contact areas. This ergonomic construction improves consistency between the hand and steering wheel, helping the driver maintain precise control during braking, cornering, and rapid corrections. Suede Palm and Fingertip Grip Strategically positioned suede reinforcement on the palm and fingertips provides dependable traction without creating a thick or disconnected feel. The traditional suede surface enhances steering-wheel grip while preserving tactile feedback. Suede fingertips also improve control when operating switches, paddle shifters, gear levers, and steering-wheel buttons. Internal Stitching for a Traditional Fit Internal seam construction creates a clean exterior and preserves the classic appearance of the glove. The carefully shaped design helps reduce excess material around the palm and fingers while maintaining a close, secure fit. The result is a traditional racing-glove feel with the durability and protection expected from current Sparco equipment. Elasticated Wrist Support An elasticated wrist helps hold the glove securely in place without requiring a bulky strap or closure. The anti-slip construction reduces unwanted movement during aggressive steering inputs and high-intensity driving. The streamlined wrist also provides comfortable overlap with the sleeve of a compatible racing suit. FIA 8856-2018 Homologated The Sparco Land Gulf Racing Nomex Gloves are homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification confirms that the gloves meet current FIA requirements for heat and flame resistance. Drivers should verify homologation and equipment requirements with their specific racing organization before competition. Sparco Land Gulf Racing Glove Features Historic Gulf Racing-inspired design Period-correct embroidered Gulf Racing patch Embroidered Sparco logo badge Single-panel fire-resistant aramid construction Ergonomic palm follows the natural driving position Reinforced stitching improves durability Suede palm reinforcement enhances steering-wheel grip Suede fingertips improve tactile control Internal stitching preserves a clean traditional appearance Elasticated anti-slip wrist provides a secure fit Available in Navy or White FIA 8856-2018 approved Sparco Land Gulf Racing Glove Specifications Manufacturer: Sparco Collection: Gulf Racing Model: Land Product Type: Nomex Auto Racing Gloves Main Material: Fire-resistant aramid fabric Construction: Single-panel design with internal stitching Palm: Ergonomic reinforced construction Grip Material: Suede palm and fingertips Wrist: Elasticated anti-slip support Available Colors: Navy and White Homologation: FIA 8856-2018 Classic Endurance Style with Current Safety The Sparco Land Gulf Racing glove is more than a cosmetic tribute. Its embroidered logos and traditional silhouette recall the visual character of historic endurance racing, while its aramid construction and current FIA certification provide the protection required by today’s drivers. For Gulf Racing enthusiasts, historic racers, and drivers who prefer clean heritage styling, the Land offers an appealing balance of authenticity, control, and modern safety. Sparco Land Nomex Glove Size Chart Frequently Asked Questions Are the Sparco Land Gulf Racing Gloves FIA approved?Yes. They are homologated to the FIA 8856-2018 standard. Are these exact reproductions of vintage Gulf Racing gloves?They are heritage-inspired reproductions that retain the classic Gulf Racing appearance while using updated materials and current Sparco safety technology. Are the Gulf Racing and Sparco logos embroidered?Yes. The gloves feature period-correct embroidered Gulf Racing and Sparco patches. What material is used for the glove body?The glove is made from fire-resistant aramid fabric in a streamlined single-panel construction. What provides the steering-wheel grip?Suede reinforcement on the palm and fingertips provides traction and tactile feedback. What is the advantage of the ergonomic palm?It follows the natural position of the hand around the steering wheel, helping reduce bunching and improve control. Do the gloves have an adjustable wrist strap?No. An elasticated anti-slip wrist holds the glove securely in place without a separate strap. What colors are available?The Sparco Land Gulf Racing Gloves are available in Navy and White. How should these racing gloves fit?They should fit closely around the hand and fingers without restricting movement or leaving excess material at the fingertips.

Sparco Gulf Racing Tour Gear Bag $419.00

Sparco Gulf Racing Tour Gear Bag The Sparco Gulf Tour Trolley celebrates the rich history of racing victories by Gulf Racing teams with a trolley bag customized with officially licensed Gulf livery. The Tour is a large rolling duffel bag specifically designed for hauling racing gear. With special compartments for storing racing helmets and shoes, the Tour is perfect for professional or weekend racers. This stylish bag features multiple internal pockets that are portioned with protective padding around the duffel bag and a reinforced under compartment. Two harness straps give extra support to hold contents in when full. A telescoping handle make it easy to lift and roll. Available in Black/Silver with the Gulf Racing logo on the top. Sparco Gulf Racing Tour Bag Details Manufacturer: Sparco Manufacturer part no.: 016437GUNRSI Dimensions: H16" x L33" x W15" Weight 10.3 lbs. (4.7 kg) Capacity: 4.5 cu. ft. (127 liters) Double adjustable closure straps Sturdy telescoping pull handle Reinforced wheels Special storage areas for bulky race items like shoes and helmets Front document pocket Protective padding with quilting and a reinforced under compartment Available in Black/Silver Securely Stow Gear In This Strong, Adjustable Roller Bag With its telescopic handle, reinforced wheels, name holder, and adjustable double closure with seatbelt-style straps, the Sparco Tour Trolley Bag makes getting to and from the race track with all your gear easy and stylish. Protective padded exterior with racing suit style quilting and a reposition-able inner divider keep expensive gear like electronics, helmets, etc. safe and secure. Front document pockets for travel docs. An upper 1/3 zippered compartment and lower reinforced 2/3 compartment with internal dividers are both finished with a Sparco customized inner lining.

Sparco Gulf Racing livery Travel Trolley with telescoping handle

Sparco Gulf Travel Roller Bag $303.00

Sparco Gulf Travel Roller Bag The Sparco Gulf Racing Travel bag is the first Sparco rolling racing gear bag specifically designed as carry-on size for air travel. Celebrating the iconic Gulf Racing livery, the Sparco Gulf Racing Travel bag is a stylish gear tote featuring multiple internal pockets with protective padding all around and a reinforced under compartment. Two harness straps lock contents securely inside. A telescoping handle makes it easy to lift and roll. Available in Black/Silver. Sparco Gulf Racing Travel Roller Bag Details Manufacturer: Sparco Manufacturer part no.: 016438GUNRSI Double adjustable closure straps Sturdy telescoping pull handle Reinforced wheels Upper compartment for soft items such as gloves and underwear Internal Front document pocket Protective padding with quilting and a reinforced under compartment Available in Black/Silver Dimensions: H10" x L22" x W14" Capacity: 1.7 cu. ft. (48 liters) Weight: 6.6 lbs. (3.0 kg)

Sparco-Competition-Race-Suit-Black/Red-Front-Image

Sparco Competition Driver Race Suit (Boot Cuff) $1,447.00

Sparco Competition Driver Race Suit (Boot Cuff) The Sparco Competition Driver Race Suit with Boot Cuffs combines lightweight fire-resistant materials, breathable stretch panels, and an ergonomic driving fit at an excellent value. Designed for competitive auto racing, the Competition delivers many of the comfort and mobility features normally found in higher-priced professional racing suits. The latest generation of synthetic fire-resistant fabrics provides a soft, lightweight outer surface with a comfortable and breathable interior. Pre-curved arms and legs help place the suit naturally in the seated driving position, reducing pulling and material bunching around the elbows, knees, shoulders, and waist. This boot-cuff version replaces traditional ankle knit cuffs with a wider pant-leg opening designed to fit over racing shoes. The result is a clean, relaxed appearance with less material concentrated around the ankle. Boot-Cuff Pant Leg Design The boot-cuff construction allows the lower portion of the suit to sit over the top of the racing shoes rather than tucking inside them. This design reduces bulk around the ankles and provides the traditional boot-cut appearance preferred by many drivers. Lightweight Fire-Resistant Construction The Sparco Competition is made from modern synthetic fire-resistant materials selected for their balance of protection, low weight, and comfort. The soft outer fabric and breathable interior help reduce fatigue during sprint races, endurance events, autocross, time trials, and track days. Unique Elastic Arm Cuffs The Competition features Sparco’s distinctive elastic wrist-cuff system. The slim cuffs are designed to fit easily inside the gauntlets of racing gloves, helping create a smooth overlap between the suit and gloves without excessive material bunching around the wrists. Pre-Curved Arms and Legs Pre-curved sleeves and pant legs follow the driver’s natural seated position. This ergonomic shaping improves comfort while steering, shifting, and operating the pedals and helps reduce tension across the shoulders, elbows, hips, and knees. Large Rear Mesh Stretch Panel A large stretch panel across the rear of the suit improves upper-body mobility and allows the suit to move with the driver. This reduces pulling across the shoulders and back when reaching for the steering wheel or controls. Breathable Inner-Thigh Stretch Panel A strategically positioned mesh stretch panel in the inner-thigh area improves airflow and flexibility around the hips, groin, and upper legs. The breathable construction helps manage heat while reducing restriction in the seated driving position. Sparco Competition Boot Cuff Race Suit Features Professional driver racing suit with boot-cuff pant legs FIA 8856-2018 homologated SFI 3.2A/5 approved Lightweight synthetic fire-resistant construction Soft outer fabric for increased comfort Breathable interior materials Unique elastic wrist-cuff system Wrist cuffs designed to fit inside racing-glove gauntlets Pre-curved arms and legs Large rear mesh stretch panel Breathable inner-thigh stretch panel Improved mobility in the seated driving position Boot-cut lower legs designed to fit over racing shoes Available in five colorways Available in European sizes 48–66 Technical Specifications Product: Sparco Competition Driver Race Suit Manufacturer: Sparco Cuff Style: Boot cuff Material: Synthetic fire-resistant fabric Arm Design: Pre-curved with elastic wrist cuffs Leg Design: Pre-curved with boot-cuff openings Rear Panel: Large mesh stretch panel Inner-Thigh Panel: Breathable mesh stretch construction Certification: FIA 8856-2018 and SFI 3.2A/5 European Sizes: 48–66 Colorways: Five available combinations Sparco Competition Driver Race Suit Sizing Chart Frequently Asked Questions Is the Sparco Competition Driver Race Suit FIA approved? Yes. The Sparco Competition is homologated to the FIA 8856-2018 standard. Drivers should confirm the current equipment requirements for their racing organization, class, and event. Is the Sparco Competition suit SFI approved? Yes. The suit is also approved to the SFI 3.2A/5 standard for many forms of sanctioned auto racing. What does boot cuff mean on a racing suit? A boot-cuff racing suit has wider lower pant legs designed to fit over the top of racing shoes. Standard ankle cuffs are narrower and are normally tucked inside the shoes. Does the boot-cuff design change the suit’s certification? No. The boot-cuff version maintains the suit’s FIA 8856-2018 and SFI 3.2A/5 certifications. It primarily changes the fit and appearance of the lower pant legs. Does the Sparco Competition provide good mobility? Yes. Pre-curved arms and legs, a large rear stretch panel, and a breathable inner-thigh panel help the suit move naturally with the driver. What is special about the wrist cuffs? The Competition uses slim elastic wrist cuffs designed to tuck easily inside the gauntlets of racing gloves. This helps reduce bulk and creates a secure overlap between the suit and gloves. Is the Sparco Competition suitable for endurance racing? Yes. Its lightweight fabric, breathable inserts, and multiple stretch panels make it a comfortable option for endurance racing and other events involving extended periods behind the wheel. How should the Sparco Competition race suit fit? The suit should fit comfortably while the driver is seated, with enough room for approved fire-resistant underwear. It should not pull tightly across the shoulders, back, waist, or knees, and it should not contain excessive loose material. What sizes are available? The Sparco Competition Driver Race Suit is available in European sizes 48 through 66. How should the race suit be cleaned? Follow the washing instructions printed on the suit’s internal care label. Close the zipper and hook-and-loop sections before washing, use a mild approved detergent, and avoid bleach, fabric softener, and excessive heat. Lightweight Comfort and Race-Ready Protection The Sparco Competition Driver Race Suit with Boot Cuffs offers an excellent balance of certified protection, breathable comfort, mobility, and value. Its pre-curved construction, unique wrist cuffs, large rear stretch panel, inner-thigh ventilation, and boot-cut pant legs make it a versatile choice for club racers, professional competitors, and serious track-day drivers.

-20% sale

Sparco Sprint Pro race suit upper torso in black with bright green and white accents and Sparco shoulder branding

Sparco Sprint Pro Driver Race Suit $869.00 $1,085.00

Sparco Sprint Pro Race Suit The Sparco Sprint Pro race suit is the latest evolution of the legendary Sprint, redesigned to incorporate significant upgrades. The Sparco Sprint has always offered tremendous fire protection, style and value. The new two-layer construction is lighter and more breathable than the previous model. The Sprint Pro has pre-curved, fully-floating sleeves and multiple stretch panels throughout for better breathability, mobility and comfort. The Sparco Sprint Pro is designed as a classic mono-color suit with dynamic contrasting colors on the side. It is available in sizes EU46 to EU66. Sparco Sprint Pro Race Suit Details: SFI 3.2A/5 and FIA 8856-2018 approved Fully-floating sleeves Pre-curved arms Ultra-soft knit arm and leg cuffs (under the outer fabric on the boot cuff) Multiple stretch panels for comfort Available in standard or boot cuff

21 22 23 24 25

OUR ADDRESSES

West Des Moines, Iowa
119 19th St.
Suite #101
West Des Moines, IA 50265

Waukee, Iowa (Opening Summer 2026)
1675 NW Gettysburg Lane
Waukee, IA 50263

sales@competitionmotorsport.com

(844) 438-7244

OPERATING HOURS:
Mon-Fri 9am - 5pm (Central time)

IMPORTANT INFO About Us Contact Us Become a Dealer Blog Terms & Conditions Returns & Exchanges Shipping Policy Shipping Protection Legal Notice Your Privacy Choices

CLUB MEMBER INFO Club Members Contact Us BMW CCA Ferrari Club of America GRIDLIFE NASA Porsche Club of America SCCA SVRA

Find anything you need

Driver Gear

If you wear it to protect yourself while racing, you'll find it in the Competition Motorsport Driver Gear collection.