Data System Components

Garmin Catalyst to IMSA Female Adapter Cable This cable will connect your Garmin Catalyst Driver Performance Optimizer to your IMSA helmet cable. Includes 3.5mm connector on one end and female IMSA connector on the other. Made in the USA from thin ROHS-compliant cable.

AiM Sports Solo2 Direct Power Cable Add this direct power cable to your vehicle and never worry about charging your Solo2 or Solo2 DL before or during an event again. Allows you to cleanly direct-wire your Solo2 or Solo2 DL to your car's 12 VDC power, eliminating dangling cigarette lighter charging wires and keeping your lap timer/data-logger always up and operational!

AiM Sports SmartyCam Cable For Solo2 DL / Dash Logger Have more than one vehicle with a dash or Solo2 DL? Want to make swapping your SmartyCam between vehicles easier? Grab this extra four-meter cable for your second car, route the cable as needed and leave it in place to power your SmartyCam when you drive that car. This cable takes the headache out of the process for people with more than one vehicle but only one SmartyCam.Connectors are 7-pin 712 male to 5-pin 712 male designed to fit the AiM SmartyCam HD Rev 2.1 or SmartyCam GP HD Rev 2.1. Four meters (13.1 feet) in length. Note: Cables typically take 3 to 5 business days to ship.

AiM Solo2 DL CAN/RS232 Wiring Harness If you routinely move your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the CAN inputs. The AiM V02569050 harness connects your Solo2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo2 DL, and the other end has six non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground). Does not fit original AiM Solo DL. AiM Solo2 DL CAN/RS232 Wiring Harness Details Manufacturer: AiM Sports Manufacturer part number: V02589050 Fits Solo DL: No Fits Solo2 DL: Yes Pins on AiM Solo2 DL Side: 7-pin thread-on connector Vehicle Chassis Ends: six non-terminated wires Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232 TX, Blue=ECU RS232 CAN-, Gray=ECU RS232 RX, Gray CAN+ AiM Solo 2 DL CAN/RS232 Wiring Harness Wiring Code Red: +9 to +15 VDC Black: Ground Grey: CAN+ Blue: CAN- Black: ECU RS232 RX Blue: ECU RS232 TX Both blue wires are the same color, but each wire has an identifier tag stating the connection type

AiM Solo 2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo2 DL to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has 2 non-terminated wires (Power and Ground). AiM Solo2 DL Vehicle Power Wiring Harness Details: Manufacturer: Aim Manufacturer part number: V02589020 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: No Pins on AiM Solo Side: 7 Pin Thread on connector Vehicle Chassis Ends: 2 Non terminated wires Vehicle Chassis Ends Break Out: Power, and Ground If you are putting a Solo2 into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install.   

AiM CAN 7-Pin to OBDII Cable for Solo2 DL Connect your AiM Solo2 DL to the OBDII port in your car for easy data-logging of your OBDII vehicle data. One end has a male K-Line (OBDII) plug to fit your car's OBDII diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo2 DL. (OBDII is also known as K-Line.) This is the same cable as the one supplied with an AiM Solo2 DL for OBDII connection. Does not fit the original Solo DL.  AiM CAN 7-Pin to OBD-II Cable for Solo2 DL Details Manufacturer: AiM Sports Manufacturer part number: V02589040 End 1: AiM 7-pin 712 (thread-on) connector End 2: OBDII (K-Line) connector Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo2: No Fits AiM Solo2 DL: Yes

AiM Sports SmartyCam External Power Cable If you're not powering your AiM SmartyCam by connecting it to a Solo2 DL or an AiM Sports Dash, you'll need this external power cable in order to provide enough juice for your SmartyCam to record every session. Installation is quick and easy. Two meters (6.6 feet) in length. Note: Cable typically takes 3 to 5 business days to ship.

AiM Sports 5-pin 712 To 712 CAN Patch Cable These AiM CAN cables have a female 5-pin 712 (screw-in) connector on one end and a male 5-pin 712 connector on the other end. The 5-pin 712 connector is used on all AiM dash- and data-logger CAN inputs. These cables can also be used to extend the reach of AiM CAN data hubs and other accessories. AiM 5-Pin CAN Cable Part Numbers:  V02552700 – cable length 1 Meter (3.3 feet)  V02552720 – cable length 2 Meters (6.6 feet)  V02552730 – cable length 3 Meters (9.8 feet)  V02552740 – cable length 4 Meters (13.1 feet)

AiM Sports 712 to 719 Four-Pin Patch Cables Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s Data Logger. Available in 0.5 thru 4 Meter lengths. The AiM 712 to 719 Cable is Compatible With: MyChron Expansion AiM Data Hub Channel Expansion EVO4 Logger EVO4s Logger PART NUMBERS: V02PCB05BTXG – cable length: 0.5 meter (1.6 ft) V02PCB10BTXG – cable length: 1 meter (3.3 ft) V02PCB15BTXG – cable length: 1.5 meter (4.9 ft) V02PCB20BTXG – cable length: 2 meters (6.6 ft) V02PCB25BTXG – cable length: 2.5 meters (8.2 ft) V02PCB30BTXG – cable length: 3 meters (9.8 ft) V02PCB35BTXG – cable length: 3.5 meters (11.5 ft) V02PCB40BTXG – cable length: 4 meters (13.1 ft) V02PCB50BTXG – cable length: 5 meters (16.4 ft) Note: Cables typically take 3 to 5 business days to ship.

Garmin Direct Power Cable is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Direct Power Cable For use with the Garmin Catalyst Driver Performance Optimizer. It is not recommended to hardwire Garmin automotive products to a 12-volt power source unless using a specifically-designed, Garmin-made accessory with a compatible device. Hardwiring a device in any other way may cause damage. Damage incurred in this way is not covered under warranty.

AiM Sports 719 Extension Cables Add the appropriate length AiM Sports 719 Extension Cable to your AiM data set-up to retrieve exactly the information you need, maximizing your data acquisition and taking your racing to the next level! Use these extension cables to connect additional sensors to the following AiM Sports dashes: MXG MXS MXL2 MXL Strada/Pista/Pro 05 Part numbers: V02PCB05B – cable length 0.5 meter (1.6 feet) V02PCB10B – cable length 1.0 meter (3.3 feet) V02PCB15B – cable length 1.5 meters (4.9 feet) V02PCB20B – cable length 2.0 meters (6.6 feet) V02PCB25B – cable length 2.5 meters (8.2 feet) V02PCB30B – cable length 3.0 meters (9.8 feet) Note: Cables typically take 3 to 5 business days to ship.

Garmin Catalyst Download & AC Adapter Kit is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Catalyst Download & AC Adapter Kit Download, power and recharge your Garmin Catalyst from any standard US wall outlet. The Garmin Catalyst adapter kit includes 1 micro cable and 1 mini cable so you can plug the appropriate cable into your device and then attach the AC outlet adapter for power or connect to a personal computer for data transfer. Garmin Catalyst Download & AC Adapter Kit Details: Manufacturer: Garmin Manufacturer Part Number: 010-11478-02

Garmin Catalyst Vehicle Power Adapter is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Catalyst Vehicle Power Adapter Simply and safely power your Garmin Catalyst using your vehicle's 12V power outlet with this standard socket power adapter. For use with the Garmin Catalyst Driver Performance Optimizer.

AiM Sports Temperature Sensor Add the appropriate AiM Sports Temperature Sensor to your AiM data set-up to retrieve exactly the temperature data you need to maximize your vehicle's performance and take your racing to the next level! Note: sensors typically take 3 to 5 business days to ship.