All

AiM Sports LCU-One Lambda Controller P/N X08LCU1SAC090 The new AiM LCU-One Lambda Controller (SKU: X08LCU1SAC090) is the direct replacement for the now-retired X08LCU05CAN unit. This latest generation controller delivers high-precision wideband air/fuel ratio readings via CAN protocol and integrates seamlessly into your AiM data system—whether you're running an EVO5, MXG, or Solo 2 DL. If you're tuning for performance, reliability, or just data sanity, this is the sensor to trust. Next-Gen Lambda Monitoring for AiM Systems Features: Direct Replacement: Replaces SKU X08LCU05CAN with identical performance and plug-and-play compatibility. CAN Protocol Data: Streams precise air/fuel ratio to your AiM logger or dash via CAN for real-time engine tuning feedback. Wide Compatibility: Works with a wide range of AiM systems (listed below) with no extra adapters or changes required. Race-Proven Reliability: Built to endure the vibrations, temperatures, and rigors of motorsports environments. Compatible With: M5s, M6 EVO4S, EVO5 SOLO2DL MXS 1.2 / 1.3 (including Strada) MXP 1.2 / 1.3 (including Strada) MXG 1.2 / 1.3 (including Strada) MXT, MXT Strada MXM M5660S XLog ECU Log AiM LCU-One Lambda Controller FAQs: Is this compatible with my older LCU-One setup? Yes, this is a drop-in replacement for the X08LCU05CAN and functions identically. Do I need to update my firmware? Most modern AiM systems will auto-detect. However, a firmware update may be required for older units. Always check your device’s latest firmware compatibility list. Can this be used with aftermarket ECUs? Yes, as long as the ECU supports AiM CAN integration, this unit can send wideband data seamlessly. Is the sensor included? This listing is for the Lambda controller. Some kits may include the Bosch LSU 4.9 sensor, but always confirm package contents before ordering. Replace your outdated unit with the latest LCU-One Lambda Controller and keep your data dialed in with uncompromising precision.

AiM Sports Solo2 Lap Timer The AiM Solo2 receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power-on requires only a few seconds and the lap times are calculated with a maximum of 0.02-second tolerance. A sleek new case with easier-to-use metal buttons give the new Solo2 a premium look and feel. The screen can be backlighted in one of seven available colors: Find Your Race Track The AiM Solo2 has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo2 identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo2 will automatically enter into auto-learning mode, figures out the characteristics of the track, and starts lap-timing anyway. Predictive Lap Time LEDs The new Solo2's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids -- now it's at your fingertips with the Solo2! Race Mode Selection Solo2 can manage different types of races: Speed races in a closed circuit Point to-point races Regularity Performance tests (0-100 km/h etc.) In each of these configurations, Solo2 gives the relevant information during the race/test along with powerful data review immediately after each session. On-Screen Data Review At the end of your session or race, you can quickly review key lap information right on the Solo2 color TFT display. WiFi And iPhone Compatibility WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo2, manage the track database, and download lap data to your PC. Connect your Solo2 to your iPhone for a quick and comfortable data analysis, managing your track database, etc. Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact lap timer today!

Pagid Racing Brake Pad Shape No. 8018 Fits The Following Vehicles: Make Model Build (Year) Front Rear BMW E92 M3 GT4 2009 X Fits the Following Calipers: Make Type Remarks Shape No. Alcon TA6. CAR89, CAR11 [4489] D51 17mm,18mm,25mm 1538, 1903, 8018 AP Racing CP5070 D51 17mm 8018 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound: The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No 4909 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 2011 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 2011 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 2011 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 2011 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 2011 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 2017 - 19 X Porsche 992 3.0 Carrera [iron brakes] 2020 + X Porsche 992 3.0 Carrera S [iron brakes] 2020 + X Porsche 992 3.0 Carrera 4S [iron brakes] 2020 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Cobalt Brake Pads Porsche D1417 Racing Brake Pads (Rear) - 16mm Cobalt D1417 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Ferodo 11 FCP4664 Porsche Front Brake Pads Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo 11 FCP4664 Front Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 GT3 [iron brakes] 14 - 16 X Porsche 991 GT3 RS [iron brakes] 16 X Porsche 991 Turbo [iron brakes] 13 - X Porsche 991 Turbo S [iron brakes] 13 - X Porsche 991.2 GT3 [iron brakes] 18 - 19 X Porsche 991.2 GT3 RS [iron brakes] 19 X Porsche 991 911 Speedster [iron brakes] 19  X Porsche 992 3.0 Carrera S [iron brakes] 20 - X Porsche 992 3.0 Carrera 4S [iron brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche Cayman GT4 [981] 16 - X Porsche 718 Cayman GTS 4.0 [982] [iron brakes] 2016 X Porsche 992 Turbo [iron brakes] 2020 - X Porsche 992 GT3 [iron brakes] 2022 - X Porsche 718 Cayman GT4RS [iron brakes] 23 - X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo DSUno Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4664 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4664 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4664 Operating Temperature Comparison Chart

Bell Racing BR8 Helmet SA2020   Designed for dirt track and other forms of off-road racing, the versatile Bell Racing BR8 can be used in multiple configurations including standard, left- or right-side forced air, left- or right-3/4 top forced air, or top forced air. Bell has developed an innovative system (the kit is included with the helmet) so racers can customize the BR8 to adapt to different forms of racing and seat configurations, providing the ultimate flexibility in one auto racing helmet model. The Bell Racing BR8 features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal that prevents shield fogging, and rear-facing venturi airflow vents to prevent dust from entering the helmet while still allowing forced air to flow in. The Bell Racing BR8 features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups. Bell BR8 Auto Racing Helmet Colors & Sizes The Bell Racing BR8 helmet comes in Gloss White and Matte Black in the following sizes: 57-58cm 58-59cm 60cm 61cm+ Bell BR8 Auto Racing Helmet Details Construction: Lightweight composite shell Safety Technology: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Comfort Technology: Integrated channels in face piece offer multiple options to install drink tube and radio system Aero: +Includes front duckbill to enhance aerodynamic performance Ventilation: Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering Interior: Black High Strength/High Comfort FR Fabric Colors: Gloss White or Matte Black Homologation: Snell SA2020 Forced air kits available for aftermarket including quick lock (V10) and are fully compatible with Maglock M6 terminals pre-installed for FHR/HANS anchor attachment Additional Bell Racing BR8 Visor Shields Available Here Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.

Bell GP.3 Sport SA2020 Helmet The Bell GP3 combines traditional Formula 1 styling, a versatile air intake system, a Double Screen Anti-Fog (DSAF) visor shield, and a lightweight carbon composite shell with leading-edge aerodynamic performance. A great option for open-wheel racers and karters who demand professional features, performance and comfort, the GP3 Sport gives you maximum ventilation and a clear view even in the toughest track conditions. BELL GP.3 SPORT AUTO RACING HELMET FEATURES Lightweight composite shell Homologations: Snell SA2020 and FIA 8859-2015 approved Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injection molded Double Screen Anti-Fog (DSAF) visor Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake  Vents can be open or closed   Front duckbill (chin spoiler) for improved aerodynamic performance Compatible with Bell’s rear spoilers, top gurney, and chin bar gurneys (available separately) for enhanced stability at high speeds Integrated channels in face piece offer multiple options to install drink tube and radio system M6 terminals for FHR anchor attachment, homologated for use with approved head and neck devices Synthetic rubber gasket seal to prevent dirt and water entering the helmet Shield and pivot kit: SE03, SV(SE03/SE05) ADDITIONAL HELMET SHIELDS FOR THE BELL GP.2 HELMET AVAILABLE HERE BELL GP.3 SPORT AUTO RACING HELMET COLORS AN SIZES Colors: White or Matte Black Sizes: S, M, L, XL   BELL GP.3 SPORT AUTO RACING HELMET SIZE CHART Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL GP.3 racing helmet safe and secure throughout each race weekend.  

GiroDisc 1417 Rear Racing Brake Pads  GP30-1417.16 Brake Pads Designed to deliver race-level performance on the street, these pads blend aggressive stopping power with rotor preservation, making them an ideal choice for motorsport enthusiasts who demand reliability and precision. The GiroDisc GP30 Endurance Race Pads feature a premium compound optimized for the unique demands of automotive racing and spirited street driving. Their advanced formulation guarantees a firm, predictable bite that enhances braking confidence during high-speed track sessions or aggressive daily driving. These pads are designed to maintain their grip under intense conditions without excessive fade or rotor wear. GP35-1417.16 Brake Pads Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. GP40-1417.16 Brake Pads GP40 compound falls between a sprint and an endurance compound. It maintains good bite and pedal feel while being friendly to your rotors. They are a favorite among our track day customers and shares a lineage with compounds found on cars competing in legendary races like the 24 Hours of Le Mans. These pads have been race-tested and hold up to the brutal conditions on the track. GiroDisc 1417 FITMENT GUIDE: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X

GiroDisc 1389 Front Racing Brake Pads  A race pad for all occasions. Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. Note: this compound is only compatible with iron rotors. GiroDisc 1389 FITMENT GUIDE: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - 25 X Porsche 718 Boxster S 2.5 [982] 16 - 25 X Porsche Boxster 2.7 [981] 12 - 16 X Porsche Boxster GTS 3.4 [981] 14 - 16 X Porsche Boxster S 3.4 [981] 12 - 16 X Porsche 718 Cayman 2.0 [982] 17 - 25 X Porsche 718 Cayman S 2.5 [982] 17 - 25 X Porsche Cayman 2.7 [981] 13 - 16 X Porsche Cayman GTS 3.4 [981] 14 - 16 X Porsche Cayman S 3.4 [981] 13 - 16 X

Girodisc GP-Series Rear Brake Pads 4004   McLaren Iron Conversion Girodisc GP-Series rear pads for McLaren Iron Conversion systems provide a high-performance braking upgrade tailored for serious street drivers (GP10) and endurance-focused track users (GP30). These pads are precision-cut to the GP shape 4004 and engineered to deliver consistent modulation, heat stability, and long rotor life when paired with Girodisc iron conversion rotors. Fits the Following Vehicles: Make Model Years Front Rear McLaren 570S (Iron Conversion) 2016–2021 X McLaren 570GT (Iron Conversion) 2016–2021 X McLaren 600LT (Iron Conversion) 2019–2021 X McLaren 650S / 650S Spider (Iron Conversion) 2014–2017 X McLaren 12C / 12C Spider (Iron Conversion) 2012–2014 X Available Compounds GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance. GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key. Features • Precision-cut for Girodisc Iron Conversion rear systems• Excellent modulation and heat control across both compounds• Low rotor wear and stable friction at temperature• Direct-fit replacement for GP pad shape 4004• Sold/priced per axle set Specifications • Pad Shape: 4004• Position: Rear• Compounds included: GP10 Street / GP30 Endurance• Compatible Systems: Girodisc Iron Conversion kits only• Sold/priced per pair of pads (one axle set) Girodisc GP-Series Pad FAQs Do these pads fit OEM McLaren carbon-ceramic brakes? No. These pads are for Girodisc Iron Conversion kits only and will not fit factory PCCB/CCM calipers. Which compound should I choose? GP10 is ideal for street and light track. GP30 is the choice for aggressive track use or endurance sessions. Are these pads noisy? GP10 is generally quiet. GP30 may produce light noise during low-speed operation due to its high-heat race formulation. Do I need to bed the pads? Yes—proper bedding ensures optimal friction transfer and prevents uneven pad deposits.

Sparco R500 Reclining Sport Seat The Sparco R500 is the perfect fusion of everyday comfort and sport-driven support. Evolved from the iconic Torino seat, the R500 delivers precise backrest adjustment and snug bolstering, making it ideal for spirited canyon drives or track-ready daily builds. Whether you prefer the plushness of OEM-style cloth or the refined look of synthetic leather, the R500 gives you comfort without compromise. Sporty Comfort Meets OEM Practicality Features: Durable OEM-style cloth with subtle tone-on-tone stitching for a factory-fresh feel Optional high-end synthetic leather with eye-catching white contrast stitching Reclining seat-back mechanism based on OEM design for smooth, precise adjustments Side bolsters provide firm lateral support without sacrificing long-haul comfort Compatible with both three-point OEM belts and 4-point harnesses for versatility Inspired by and improved upon the legendary Sparco Torino seat Sparco R500 Seat FAQs: Is the Sparco R500 a good daily driver seat? No question—it was built for it. The OEM-style reclining system and soft-touch materials make it incredibly comfortable for everyday use. Can I use a standard seat belt with this seat? Yes, the R500 works with 3-point OEM seat belts as well as 4-point harnesses if you're building something more track-focused. What’s the difference between the cloth and synthetic leather versions? The cloth version has a subtle, factory-look tone-on-tone stitch, while the synthetic leather is more upscale with bright white stitching for contrast. Does the R500 come with sliders or brackets? Seat brackets and sliders are sold separately. You'll need vehicle-specific mounts for proper installation. Upgrade your ride with a seat that’s as ready for the back roads as it is for the daily grind—order your Sparco R500 today and experience the difference in control and comfort.

Sparco 6 Point Competition H-2 PD Racing Harness When you’re pushing the limits on track, your harness is your lifeline—literally. The Sparco 6-Point Competition H-2 PD Racing Harness isn’t just another set of straps; it’s a precision-engineered safety system designed to keep you locked in, focused, and ready to attack every apex. Whether you're chasing tenths in time attack or going wheel-to-wheel in door-banging battles, this FIA-approved harness is built for one thing: performance-driven protection. Why Choose the Sparco H-2 PD Racing Harness? 6-Point Design: Provides maximum stability and security, keeping you planted under hard braking and high-G corners. No submarining here!2" FHR-Specific Straps: Engineered to work seamlessly with Frontal Head Restraints (FHR) like HANS devices for ultimate neck protection.Lightweight Aluminum Buckle: Quick-release design for fast, effortless exits—because pit stops (and post-race celebrations) shouldn’t take forever.High-Resistance Steel Adjusters: Built to handle the stress of racing, ensuring a perfect fit that won’t loosen mid-session.Pull-Down Adjustment on Abdominals: Easily tighten your harness without awkward fumbling—because safety should be effortless.Snap Hooks & Compact T-Bar: Secure attachment points that make installation a breeze while keeping your setup neat and race-ready.  Product Specifications: Type: 6-Point Racing Harness Strap Width: 2" (FHR-specific) Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down adjustment on abdominal straps Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 FAQs – Because We Know You’re Curious Is this harness FIA-approved?Yes! It meets FIA HOM. NO: SH.076.20-T-6, meaning it’s race-legal and ready to hit the track. Can I use this harness with a HANS device?Absolutely! The 2" shoulder straps are designed specifically for FHR systems, ensuring a snug, secure fit without extra bulk. How do I install this harness in my car?The snap hook design makes it super easy to attach to existing mounting points. If you’re running a custom setup, make sure you have reinforced eye-bolt anchors. Is this harness comfortable for endurance racing?Yes! The pull-down adjusters make it easy to fine-tune your fit mid-race, and the compact T-bar keeps everything aligned, so you’re not fighting with tangled straps. Lock In. Stay Safe. Drive Faster. Your harness shouldn’t be an afterthought—it’s what keeps you secure, focused, and in control. The Sparco 6-Point Competition H-2 PD Racing Harness delivers top-tier safety, FIA-approved reliability, and race-ready convenience in one sleek package.  

Sparco GT Performance Seat The Sparco GT Performance Seat delivers sport comfort and vintage-inspired style for drivers who want more support and refinement. Its updated bolsters offer improved lateral hold, while redesigned padding ensures comfort during extended drives. The seat features a removable headrest and dual recline levers for easy adjustment on the go. Combining durability and elegance, the GT uses synthetic leather outer bolsters for longevity and soft-touch microsuede in the center for premium comfort. Ideal for both daily driving and spirited weekend runs, this seat adds sophistication and control to any build. Key Features Reclining seat with dual adjuster levers Durable synthetic leather bolsters with microsuede inserts Removable headrest for customizable comfort Accepts many 4-point harnesses (fitment dependent) Supportive side bolsters for improved control Ergonomic padding for long-distance comfort Dimensions