All

AP Racing Road 380mm Road Brake Kit for Porsche (Rear) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Porsche 992 Carrera / Carrera 4 (PCCB and Iron Rotors) Complete front AP Racing Road Brake Kit for Porsche 991 and 992 911 features; Takes your brakes into GT3 territory with huge 380x28mm, 48 vane AP Racing J Hook discs Retains full function of OEM parking brake Painted calipers with dust boots add durability in inclement weather conditions Low noise, vibration, and harshness for a very OE-like experience during daily driving Leverages four piston AP Racing CP9541 World Radi-CAL II calipers with a red, black, or silver painted finish Pistons sized properly to maintain proper brake bias and work with the OEM master cylinder and ABS system Designed to mate with the front AP Racing Road Brake kit Weighs roughly the same as an OEM rear rear brake setup despite a huge size increase of the rotor size to 380mm

Chillout Systems Genesis-Advanced Driver Cooling System Genesis – Advanced Driver Cooling System for Endurance and Pro Racing The Genesis is not just another driver cooling box—this is Chillout Systems’ flagship solution, engineered to handle the punishing demands of endurance racing, extreme heat, and full-tilt track days. With up to 525W of active cooling power and a race-ready carbon fiber chassis, this system doesn’t flinch when the heat is on. Using a high-efficiency brushless micro compressor and a precision-tuned liquid cooling loop, the Genesis rapidly pulls heat away from your core. The result? Less fatigue, better mental clarity, and sustained performance when it matters most. A cockpit-mounted digital controller lets you adjust on the fly—so whether you’re on a pace lap or deep into a green-flag stint, you stay in control. From the quick-release baseplate to the included Chillout digital controller, this is pro-grade hardware for drivers who demand the best. Genesis Driver Cooling System Features Carbon Fiber Shell: Lightweight, strong, and heat-resistant to survive brutal cockpit conditions. Quick-Release Baseplate: Allows rapid removal and reinstallation between sessions or drivers. Digital Cockpit Controller: Manage cooling power and settings without ever leaving the driver’s seat. Low-Draw Mode: Ideal for pit stops, safety cars, or low-load intervals to reduce electrical strain. Brushless Micro Compressor: Compact and efficient, built for high-output cooling without high amp draw. Fully Compatible: Works with all Chillout shirts and standard insulated coolant hose kits. What’s in the Box of the Chillout Genesis Driver Cooling System • Genesis CO-GCV1 Cooling System• Carbon Fiber Baseplate• External Blower• Wired Digital Controller• Power Inverter• Coolant Formula (1 Bottle)• 8AWG Wiring Harness• Mounting Feet and Locking Pins Chillout Genesis Cooling System FAQs How much cooling power does the Genesis deliver?The system produces up to 525W of active cooling—more than enough to regulate core temperature in endurance racing conditions. Is it compatible with non-Chillout cooling shirts?It’s optimized for Chillout gear but also works with standard insulated coolant hose systems. Can I adjust cooling during a race?Yes, the wired digital controller mounts in your cockpit for real-time performance tuning. What makes the Genesis different from other cooling units?The Genesis features carbon fiber construction, a low-amp brushless compressor, and pro-level modularity—making it the most advanced system in Chillout's lineup. If you’re serious about peak performance in the heat of competition, the Genesis system is your secret weapon. Keep your cool, race harder, and finish stronger with Chillout Systems Genesis.

Arai GP-7SRC 8860-2018 Carbon Helmet The Arai GP-7SRC Carbon Racing Helmet is Arai's elite closed-cockpit auto racing helmet, engineered for drivers who demand an exceptionally lightweight carbon shell, advanced impact management, excellent airflow, and FIA 8860-level protection. Built around Arai's proprietary racing carbon fiber construction, the GP-7SRC combines high strength with controlled flexibility to help manage impact energy while keeping helmet size and weight to a minimum. Arai specifically developed the GP-7SRC for the demands of high-level closed-cockpit motorsport, and the helmet meets or exceeds the FIA 8860-2018 standard. FIA 8860-2018 Homologated The GP-7SRC is homologated to FIA 8860-2018, one of the highest-level helmet standards used in professional motorsport. This version is the standard GP-7SRC and should not be confused with the separate GP-7SRC ABP model, which adds Advanced Ballistic Protection certification. :contentReference Proprietary Racing Carbon Fiber Shell The defining feature of the GP-7SRC is its proprietary Arai carbon fiber shell. Rather than relying only on stiffness, Arai engineers the material and weave to provide exceptional strength along with a degree of flexibility intended to help manage impact energy. Multiple reinforcing materials are incorporated into the shell to increase performance while minimizing unnecessary weight and bulk. The result is a premium racing helmet designed specifically for drivers competing at the highest levels of closed-cockpit racing. :contentReference Arai Glancing-Off Shell Philosophy Arai's helmet design philosophy emphasizes a smooth, rounded shell that can help redirect energy by allowing the helmet to glance away from an obstacle rather than unnecessarily catching against it. On the GP-7SRC, the shield pivot hardware has been repositioned lower on the shell, increasing the smooth shell area above the eyeport. The pivot system uses a one-piece track slider with T20 Torx adjustment hardware. :contentReference Advanced GP-7 Ventilation The GP-7SRC uses three large closeable intake vents, larger 10mm ventilation openings, and two additional center exhaust vents to move more air through the helmet. A redesigned rear exhaust cowling helps hot air escape while also improving aerodynamic performance. This increased airflow is especially valuable during long sessions in enclosed race cars where cockpit temperatures can climb quickly. :contentReference Positive Shield Latch Arai's positive shield latch provides secure visor closure while still allowing normal shield operation. Rather than functioning as a separate add-on, the latch is engineered as an integrated component of the GP-7 shield system. :contentReference FCS Cheek Pads for a Secure Racing Fit The GP-7SRC uses sculpted FCS cheek pads designed to grip the driver's lower jaw more securely. This gives the helmet a more encapsulated feel and can help reduce unwanted movement and outside wind noise at speed. Replacement GP-7 cheek pads are also available in multiple thicknesses, allowing the interior fit to be fine-tuned when appropriate. :contentReferenceFHR and HANS Compatible The GP-7SRC incorporates factory-installed M6 threaded mounting provisions designed to accommodate compatible Head and Neck Restraint anchor systems. A flat mounting surface around each threaded location allows compatible anchor bases to sit flush against the helmet shell, simplifying installation of many HANS and other FHR systems. :contentReference Eject System Ready A pre-cut pocket beneath the crown pad allows the optional Eject helmet removal system to be installed without extensive modification to the interior.Drink Tube Compatible The GP-7SRC's center chin liner can be removed to simplify installation of a hydration tube. Arai provides four possible drink-hose placement locations, allowing the setup to be tailored to the driver's cockpit and preference. :contentReference Arai GP-7SRC Features FIA 8860-2018 homologation Arai proprietary racing carbon fiber shell Designed for high-level closed-cockpit motorsport Strong yet flexible carbon construction for impact-energy management Multiple shell reinforcing materials Three large closeable intake vents Larger 10mm ventilation openings Two additional center exhaust vents Redesigned aerodynamic exhaust cowling Arai positive shield latch Lower-position shield pivot system T20 Torx shield adjustment hardware Sculpted FCS cheek pads Integrated M6 FHR mounting provisions Eject system-ready crown pad Drink tube compatible Intermediate Oval interior fit Available in sizes X-Small through Large GP-7SRC vs. GP-7SRC ABP The GP-7SRC meets FIA 8860-2018 and is engineered primarily for elite closed-cockpit racing. The GP-7SRC ABP is a separate version that meets the FIA 8860-2018 ABP specification and adds the additional forehead intrusion protection associated with Advanced Ballistic Protection. If your series specifically requires ABP certification, choose the GP-7SRC ABP rather than the standard GP-7SRC.  GP-7 Shield Compatibility The GP-7SRC uses the Arai GP-7 shield family. Replacement shields are available in multiple configurations, including clear, tinted, mirrored, and anti-fog options. :contentReference Getting the Proper GP-7SRC Fit Arai lists the GP-7SRC in X-Small, Small, Medium, and Large with an Intermediate Oval interior fit. Proper helmet fit is critical to comfort and performance, and head circumference should be measured around the widest portion of the head before selecting a size.  A new helmet should fit firmly and evenly around the head without concentrated pressure points. Because head shape matters in addition to circumference, trying the helmet on is the best way to confirm proper fit. Arai GP-7SRC 8860-2018 Sizing Chart Questions & Answers What certification does the Arai GP-7SRC have?The Arai GP-7SRC meets or exceeds the FIA 8860-2018 homologation standard.  Is the GP-7SRC the same as the GP-7SRC ABP?No. The GP-7SRC meets FIA 8860-2018, while the GP-7SRC ABP is a separate helmet that meets the enhanced FIA 8860-2018 ABP standard.  Is the GP-7SRC intended for closed-cockpit racing?Yes. Arai specifically describes the GP-7SRC as being engineered for the demands of high-end closed-cockpit racing.  Is the Arai GP-7SRC carbon fiber?Yes. It uses Arai's proprietary racing carbon fiber material and weave combined with additional reinforcing materials to provide high strength while controlling weight and shell size.  Does the GP-7SRC support HANS or other FHR systems?Yes. The helmet includes factory-installed M6 threaded mounting provisions designed for compatible Head and Neck Restraint anchor systems. Can I install an Eject system?Yes. A pre-cut pocket under the crown pad allows installation of an optional Eject helmet removal system.  Can a drink tube be installed?Yes. The removable chin liner is designed to simplify drink-tube installation and provides four potential hose-routing positions. :contentReference Can I change the cheek pads to adjust fit?Yes. Arai offers replacement GP-7 cheek pads in multiple thicknesses, allowing the cheek fit to be adjusted when needed.  Can the GP-7SRC be custom painted?Yes, but Arai warns that the helmet trims should not be removed during painting because removing them can void the FIA certification.  What sizes does the GP-7SRC come in?Arai currently lists X-Small, Small, Medium, and Large.  Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.

The SilverRocket Ultra Downforce Front Dry Carbon Fiber Aeroshield Splitter is the ultimate front-end aerodynamic upgrade for competitive Porsche GT4 RS drivers. Crafted entirely from premium dry carbon fiber, this splitter is engineered to generate maximum front-end grip, high-speed stability, and razor-sharp turn-in on the track. SilverRocket Ultra Downforce Front Dry Carbon Fiber Aeroshield Splitter Massive Front Grip. Minimal Weight. Maximum Attack. Developed through advanced CFD modeling and real-world aero testing, the SilverRocket Aeroshield Splitter delivers dramatic increases in front-end downforce without adding unnecessary drag. Its extended flat-plane profile channels high-pressure air under the car while the vertical endplate shields reduce turbulence for a clean, efficient aerodynamic signature. SAFETY NOTICE: The SilverRocket Front Aeroshield is designed to optimize downforce and ideal aerodynamic balance only when paired with the SR DRS-1 Flex Carbon Wing or SR GT4 RS Clubsport Flex Carbon Wing. To maintain driving safety and aerodynamic stability at high speeds, it should not be used with the OEM Porsche GT4 RS or Clubsport rear wing. See the chart below for more information on safe use of the SR Aeroshield. Race-Bred Dry Carbon Construction Built from aerospace-grade dry carbon fiber, the Aeroshield Splitter is as strong as it is light. This advanced composite keeps weight to an absolute minimum while offering exceptional rigidity, allowing you to push harder through high-speed corners and threshold braking zones. Engineered to Dominate This splitter isn’t just for show—its aggressive profile and undertray design increase front downforce across a wide range of speeds, delivering consistent aerodynamic grip when it matters most. Whether you’re chasing lap times or out-braking the competition, the Aeroshield Splitter provides the stability and confidence needed to attack every apex. Direct Fit for GT4 RS Designed as a direct replacement for the OEM unit, this splitter installs using factory mounting points with no cutting or drilling required. Fully compatible with other SilverRocket aerodynamic components including the upcoming SR diffuser and underbody kits. Material: Dry carbon fiber Fitment: Porsche GT4 RS (direct bolt-on) Aero Gain: Significantly increased front-end downforce Weight: Ultra-lightweight dry carbon construction Finish: UV-resistant matte carbon fiber weave Compatibility: Works with SR diffuser and factory bumper Does this splitter require cutting?No. It installs using OEM mounting points—no modification needed. Is this for track use only?Yes. This is a race-grade aerodynamic component not intended for street use in all regions. Will it clear curbs or inclines?This splitter has an aggressive aero profile and sits lower than stock. Caution is advised over curbs and ramps. Unleash true front-end grip with the SilverRocket Ultra Downforce Front Aeroshield Splitter—where weight savings, aero balance, and carbon fiber craftsmanship meet uncompromising performance.

SilverRocket Dry Carbon Tailgate & Glass For Porsche 718/981 Cayman This Tailgate Fits the Following Cars: Porsche Cayman 981 (all) Porsche Cayman 718 (all) Superior Materials and Manufacturing Constructed from aerospace-grade dry carbon fiber, the new SilverRocket Dry Carbon Fiber Tailgate and Lightweight Glass reduce weight by up to 20.7 lbs. compared to the OEM Cayman tailgate & wing assembly. The SilverRocket super strong V-frame and honeycomb core are engineered to support larger wings, handling downforce levels of up to 600 kg / 1,322 lbs while maintaining exceptional stability. The Silver Rocket Dry Carbon Tailgate is specially designed and engineered to accommodate a backward-extended (gooseneck) rear wing setup. Exquisite craftsmanship and attention to detail ensure that the SilverRocket Dry Carbon Fiber Tailgate with Lightweight Glass complements the carbon fiber aesthetics pioneered by Porsche's GT4 RS Weissach Pack. This package includes the crystal-clear SilverRocket HD lightweight polycarbonate glass, eliminating concerns about cracking the OEM rear backlight (especially the costly GT4 RS special thin rear glass). Compatible with both OEM GT4 and GT4 RS wing supports as well as Silver Rocket dry carbon fiber wing risers. Extremely Lightweight and Beautifully Constructed Constructed from 100% aerospace-grade dry carbon fiber, the Silver Rocket V-Frame tailgate is 6.4 kg (13.7 lbs) lighter than the stock tailgate of the GT4 RS. When combined with the SR Carbon Fiber Wing Support and SR Wing, this results in a total weight savings of 20.7 lbs at a high center-of-gravity point compared to the OEM Porsche setup. Porsche has incorporated super-thin glass into the GT4 RS tailgate to reduce weight. However, this thin, lightweight glass is prone to cracking, even in automatic car washes. To make matters worse, the OEM tailgate glass comes with a staggering price tag of $2,600. In response to this issue, SilverRocket has developed their own HD Lightweight Polycarbonate Glass, which is included in the Dry Carbon Fiber Tailgate package at no additional cost. This innovative solution not only reduces weight but also alleviates concerns about the fragility of the expensive GT4 RS rear glass. Touring Version Available In response to requests from several VIP customers, SilverRocket have designed a special Touring version of the V-Frame Dry Carbon Fiber Tailgate that eliminates the cutouts for rear wing mounts. Please note that this Touring version is custom built-to-order only, with a lead time of approximately 8-10 weeks. Call us at (844) 438-7244 or email sales@competitionmotorsport.com for more details or for help placing your order. SilverRocket Dry Carbon Fiber Tailgate + Glass Kit Details Manufacturer: SilverRocket Advanced Motorsport Engineering Manufacturer part no.: SR-718TG Fits all Porsche 718 and 981 Cayman models Manufactured from 100% aerospace-grade dry carbon fiber Includes crystal-clear SilverRocket HD lightweight polycarbonate glass Straightforward installation with very detailed instruction manual and step-by-step photos This product is intended for off-road, race track use only.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.      

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.      

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.      

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.      

For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminum calipers with six pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monobloc components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminum calipers. These are also available as monoblock parts machined from a single billet of cast aluminum, which ensure outstanding rigidity and minimized deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo Big Brake Kit Details: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 8 Disc Size: 380mm x 34mm Disc Construction: Machined cast iron Disc Type: Drilled, Slotted, or Scattered Disc Vane Design: Vented straight vane Disc Material: Cast iron Disc to Hat Mounting: Floating H-Bobbin with anti-rattle spring Front or Rear System: FRONT Goodridge stainless steel brake lines Brembo high-performance brake pads

For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with six pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Brembo Design With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo Big Brake Kit Details: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, Silver, or Yellow Number of Pistons: 6 Disc Size: 405mm x 34mm Disc Construction: Machined cast iron Disc Type: Drilled, Slotted, or Scattered Disc Vane Design: Vented straight vane Disc to Hat Mounting: Floating H-Bobbin with anti-rattle spring Front or Rear System: FRONT Goodridge stainless steel brake lines Brembo high-performance brake pads

Racetech RT8119W Racing Seat The latest advancement in drag racing seat technology takes an uncompromising form the all-new RT8119. Leveraging the accomplished 119 series seat architecture, the RT8119 is crafted from an ultra-lightweight, premium carbon fiber shell that has been innovated for drag racing with the ultimate in safety, weight savings and comfort. Racetech RT4119W Racing Seat Features Available in two sizes, starting at 12.6 lbs Significant weight savings enabling valuable weight redistribution Ergonomic shell geometry ensures secure driver fit Energy-absorbing foam optimizes shoulder and rib support Pronounced thigh support and molded base cushion Back mount-capable for enhanced chassis feel and structural integrity Large harness guides and provisions for a 7-point harness with reverse submarine belts keeps this seat aligned with the latest NHRA tech regulations Ideal for Pro Mod, Pro Boost, Pro Nitrous, Pro Street, Factory X, Factory Stock Showdown and stock-related classes Racetech RT4119W Racing Seat Installation Parallel sides, and flush bosses for ease of mounting Choose from steel or aluminum side mount brackets designed for seamless integration with seat mounting points Racetech RT4119W Racing Seat Details Application Common Applications Drag racing, where weight reduction is critical Stock Color / Material Gel-coat Clear self-finish Seat Cover Black fire-retardant fabric Wear Patches Black perforated leather Technical FIA Homologation None Shell Construction Carbon Fiber Shell Weight From 7.3lbs (3.3kg) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes W - WideWT - Wide & Tall Design Head Restraint None HANS Compatible Yes Harness Compatibility Up to 7-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes Back-mount Required for FIA Homologation N/A   Racetech RT4119W Racing Seat Size Chart

Stilo VENTI WRX Dirt Carbon Zero Helmet The Stilo VENTI WRX Dirt Carbon Zero Helmet is Stilo's premium full-face solution for serious off-road, rally raid, SSV, buggy, and open-vehicle competition. Purpose-built for extreme environments, the WRX Dirt combines an exceptionally wide eyeport, sealed full visor, integrated communications, lightweight Carbon Zero construction, and FIA 8860-2018 protection. Stilo developed the VENTI WRX by combining key strengths of its rally-focused VENTI platform with the full-face protection of its circuit racing helmets. The result is a helmet designed around the unique demands of drivers racing through dust, dirt, mud, heat, rough terrain, and constantly changing conditions. FIA 8860-2018 Carbon Zero Protection The VENTI WRX Dirt Carbon Zero is the highest-performance version of the WRX Dirt platform and is designed for drivers who require FIA 8860-2018 homologation. The Zero version uses Stilo's higher-tensile carbon fiber construction, providing an exceptionally strong shell while keeping overall helmet weight and bulk under control. For competitors racing internationally or in series requiring FIA 8860 certification, the Carbon Zero is the premium WRX Dirt configuration. Purpose-Built for Dirt and Rally Raid The VENTI WRX was not simply adapted from a traditional road-racing helmet. Stilo engineered the platform specifically for raid and off-road competition after working with drivers and teams competing in some of the world's harshest racing environments. The WRX Dirt configuration is specifically designed around open vehicles where the driver is exposed to dust, dirt, rocks, mud, and other debris. Its fully sealed visor provides the coverage of a full-face helmet while maintaining the exceptionally broad visibility needed to read terrain and react quickly. 34% Wider Field of View Visibility is one of the biggest advantages of the Stilo VENTI WRX. Stilo designed the eyeport to provide a 34% increase in field of view compared with the ST5 range. The enlarged opening provides excellent peripheral vision, helping drivers see obstacles, terrain changes, corner entrances, other vehicles, course markers, and the surrounding environment without unnecessary head movement. Despite the dramatically larger opening, the VENTI WRX remains a certified full-face helmet. High-Tensile Carbon Zero Shell Stilo offers the WRX platform in both Carbon and Carbon Zero configurations. The standard Carbon model uses a medium-tensile carbon fiber weave, while the Carbon Zero uses a higher-tensile carbon construction for increased performance. The Zero is the lightest and highest-performing version of the VENTI WRX family and is the model intended for FIA 8860-level competition. Stilo PURO Technology The VENTI WRX Carbon Zero uses Stilo's PURO Super Smooth technology. This manufacturing process produces a high-quality finished carbon surface without requiring the traditional heavy lacquer layer commonly applied to carbon helmets. Eliminating unnecessary clear coat helps reduce weight while also making the helmet more convenient for professional custom painters. Factory graphics are not buried underneath a thick lacquer finish, simplifying preparation for custom helmet designs. Fully Sealed Dirt Visor The WRX Dirt uses a fully sealed visor designed specifically for exposed and debris-heavy environments. The visor helps keep dirt, dust, mud, and other material away from the driver's face and eyes while maintaining a large, clear viewing area. This sealed configuration is one of the primary differences between the WRX Dirt and WRX Raid models. Integrated Rally Communications Communication is built into the VENTI WRX platform rather than treated as an afterthought. The helmet is designed with integrated side ports and comes communication-ready with ear cups and built-in speakers. The system can be used with compatible Stilo intercom equipment, while available adapters allow integration with other communication and radio systems. For driver and co-driver teams, this creates a cleaner installation with fewer loose wires and less equipment competing for space inside the helmet. Top Ventilation for Extreme Conditions Top ventilation openings help move heat and moisture away from the driver's head during demanding race conditions. The top ventilation system can also accommodate compatible Stilo Short Top Air components, providing racers with additional cooling options when their vehicle setup supports forced-air helmet systems. Pre-Installed HANS Posts The VENTI WRX comes with HANS/FHR posts pre-installed, making it ready for use with a compatible Head and Neck Restraint system. This factory-integrated setup eliminates the need to separately install helmet anchors before preparing the helmet for competition. Three-Shell Construction for Better Fit Stilo designed the VENTI WRX around three shell sizes to help place each driver into the smallest and lightest shell appropriate for their head size. Interchangeable cheek pads and top pads also allow the helmet interior to be fine-tuned, giving drivers additional flexibility when dialing in fit and comfort. Extensive WRX Accessory System The VENTI WRX platform was engineered to be highly configurable. Genuine Stilo accessories allow the helmet to be tailored to the driver's vehicle, conditions, communication setup, and personal preferences. Available WRX accessories include alternate full visors, tinted and mirrored visor options, tear-offs, air systems, communication components, peaks, visor fitting hardware, and other competition equipment. Stilo VENTI WRX Dirt Carbon Zero Features FIA 8860-2018 homologation Premium Carbon Zero construction High-tensile carbon fiber weave Stilo PURO Super Smooth technology Purpose-built for off-road and rally raid competition Designed specifically for open vehicles Certified full-face helmet construction 34% wider field of view compared with the ST5 range Fully sealed Dirt visor Integrated communication side ports Ear cups and integrated speakers Pre-installed HANS/FHR posts Top ventilation openings Compatible with available Stilo Short Top Air systems Three shell sizes for optimized fit and weight Interchangeable cheek and top padding Multiple optional visor finishes and accessories available VENTI WRX Dirt vs. VENTI WRX Raid The VENTI WRX Dirt and VENTI WRX Raid share the same wide-vision WRX platform but are configured for different environments. The WRX Dirt is designed specifically for open vehicles and uses a fully sealed full visor to maximize protection from dirt and debris. The WRX Raid is aimed primarily at closed vehicles and can be configured with a short visor and adjustable peak. For an open buggy, SSV, rally raid vehicle, or other application where the driver's face is exposed to the environment, the WRX Dirt is the more protective configuration. VENTI WRX Carbon Zero vs. Carbon The WRX Carbon uses Stilo's medium-tensile carbon fiber construction, while the WRX Carbon Zero steps up to a higher-tensile carbon weave and is positioned as the lighter, higher-performance version of the helmet. The Carbon Zero is also the WRX configuration to choose when FIA 8860 homologation is required. Why the WRX Dirt Eyeport Matters Off-Road Off-road drivers need to process considerably more than a conventional racing line. Terrain changes, rocks, ruts, course markers, competitors, and obstacles can appear from multiple directions. The VENTI WRX's exceptionally large eyeport gives the driver more peripheral information without sacrificing the coverage of a full-face design. That combination is what separates the WRX from a conventional closed-cockpit racing helmet. Getting the Proper Stilo Helmet Fit A racing helmet should fit firmly and evenly around the entire head. It should not move independently when the driver turns or shakes their head, but it should also avoid concentrated pressure points that become painful during longer sessions. Use a flexible measuring tape around the widest part of the head, approximately one inch above the eyebrows and around the back of the skull. Take the measurement two or three times and use the largest consistent measurement when comparing your head circumference with the Stilo sizing chart. Stilo VENTI WRX Dirt Carbon Zero Helmet Sizing Chart Questions & Answers What certification does the Stilo VENTI WRX Dirt Carbon Zero have?The VENTI WRX Dirt Carbon Zero is the FIA 8860-2018 version of the WRX Dirt platform and is designed for high-level motorsport competition requiring FIA 8860 homologation. What is special about the Carbon Zero version?The Carbon Zero uses Stilo's higher-tensile carbon fiber construction and is positioned as the lightest and highest-performing version of the WRX family. How much more visibility does the VENTI WRX provide?Stilo states that the WRX provides a 34% increase in field of view compared with the ST5 helmet range. Is the VENTI WRX Dirt a full-face helmet?Yes. Despite its extremely large eyeport, the WRX is designed, tested, and certified as a full-face helmet. What is the difference between the WRX Dirt and WRX Raid?The WRX Dirt is intended for open vehicles and uses a fully sealed visor for protection from dirt and debris. The WRX Raid is primarily designed for closed vehicles and can be configured with a short visor and peak. Does the WRX Dirt include communications?The VENTI WRX platform includes integrated communication provisions with ear cups, built-in speakers, and side ports for connection to compatible Stilo intercom or radio equipment. Does the helmet come with HANS anchors?Yes. HANS/FHR posts are pre-installed on the VENTI WRX. Can I use a forced-air system with the WRX Dirt?Yes. The helmet's top ventilation openings can be used with compatible Stilo Short Top Air components. Are replacement visors available?Yes. Stilo offers WRX Dirt full visors in several configurations, including clear, smoked, mirrored, and colored iridium options. Can the interior fit be adjusted?Yes. The WRX uses interchangeable cheek and top pads, allowing the interior fit to be fine-tuned when the correct shell size has been selected. Is the Carbon Zero different from the standard WRX Carbon?Yes. The standard Carbon uses a medium-tensile carbon weave, while the Carbon Zero uses Stilo's higher-tensile carbon construction and is the FIA 8860 version of the WRX platform. Is the WRX Dirt designed specifically for dusty conditions?Yes. The sealed full visor and full-face construction are specifically intended to protect the driver in demanding dirt, dust, mud, and debris-heavy environments. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.      

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware.     ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.      More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.     Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.