All

Performance Friction PFC 380.34.0062.451/461 380mm Front Floating Racing Brake Rotor Replacements Fit The Following Cars (w/ OEM Iron Rotors) - Center hat Excluded, rotor disc only. Replacement Disc Only For PFC 380.070.63/64 Porsche 991 GT3 (Front) Porsche 991 GT3RS (Front) Porsche 981 GT4 (Front) PFC the manufacturer of Porsche Cup braking systems developed a 380x34mm front rotor replacement kit that is a direct replacement for the OEM Iron Brake rotors.  Performance Friction PFC V3 Discs with Zero Failure Technology Unique Rotor and Hat interface, eliminating most hardware. The elimination of hardware reduces weight, complexity, and installation time for less down time and more seat time on the track.  Replace your rotor discs in minutes with a flat head screwdriver PFC metallurgy specified for high Thermal stability and mechanical strength for increased longevity 48 vane geometry engineered for increased airflow for increased brake cooling during the heat of the battle while on track Patented slot pattern for increased initial bit and pad surface conditioning Lightweight forged hard anodized aluminum hat for increased durability and performance The two-piece PFC V3 design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A2-307 Rear Rotors for Toyota GR Supra FITMENT: Toyota GR Supra (345mm), rear This Girodisc two-piece rotor set is a direct replacement for the Rear rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the Rear axle of the Toyota Supra GR, while being far more durable in track use. American Made With Specially Formulated Materials Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D2-307) when the latter need to be replaced. All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware. We also recommend replacing them if a crack leads to the edge of the ring. Sold and priced per pair.  If you would like help choosing rear pads, give us a call at (844) 438-7244.

Girodisc A1-307 Front Rotors for Toyota GR Supra FITMENT: Toyota GR Supra (348mm), front This Girodisc two-piece rotor set is a direct replacement for the front rotors on the Toyota Supra GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the front axle of the Toyota Supra GR, while being far more durable in track use. American Made With Specially Formulated Materials Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D1-307) when the latter need to be replaced. All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware. We also recommend replacing them if a crack leads to the edge of the ring. Sold and priced per pair.  If you would like help choosing rear pads, give us a call at (844) 438-7244.

X-20 Drag Racing Suit: Lightweight Protection for High-Speed Action! Ready to feel invincible on the drag strip? Enter the X-20 Drag Racing Suit—a blend of protection, comfort, and style that doesn’t mess around when it comes to keeping you safe at top speed. This isn’t your average suit; it’s a 7-layer fortress of protection made from our exclusive X-Light fabric. Whether you’re flooring it in a Top Fuel dragster or just trying to shave milliseconds off your ET in a door-slammer, the X-20 has you covered—literally. Features that Speak for Themselves (and Maybe Even Yell "GO!") SFI 3.2A/20 Approved – Translation: This suit is built to handle extreme heat and impact, meeting the highest safety standards in the sport. Exclusive X-Light Fabric – It’s like wearing a cloud that’s been beefed up for battle. You get breathability and flexibility without giving up protection. Fully Floating Sleeves – Mobility matters when you’re strapped in, so we’ve got you covered with sleeves that let you steer, shift, and fist pump when you crush that quarter-mile. Expandable Waist & Internal Knitted Cuffs – Because comfort matters. A stretchy waist and snug cuffs make sure this suit fits just right, so you can focus on hitting the throttle. One Piece or Two? – Choose between a single-piece overall or a two-piece jacket and pants set. Either way, you’re winning in style. Let’s Get Specific SFI Rating: 3.2A/20 Material: 7 layers of X-Light fabric Design: Box-quilt stitching for extra durability Options: Available as a one-piece suit or two-piece jacket and pants set Size Range: (Insert size details here) – Fits like a glove… that’s also fireproof. FAQs AnsweredQ: Is the X-20 suit fireproof?A: You bet! With its SFI 3.2A/20 rating, this suit can withstand intense heat, protecting you from the fire risks inherent in drag racing. Q: Can I wash my X-20 suit at home?A: Not quite. Due to the specialized materials and construction, you’ll want to have this suit professionally cleaned to maintain its protective properties. Q: How should the X-20 fit?A: Think snug, but not restrictive. The expandable waist and internal cuffs will help it conform to your body while allowing freedom of movement where you need it most—like your arms and legs. Q: Is this suit approved for professional drag racing?A: Absolutely! The X-20 meets SFI 3.2A/20 standards, so you’re race-ready whether you’re competing in sanctioned events or just breaking personal records. Call to ActionSo, are you ready to suit up and unleash your inner speed demon? The X-20 Drag Racing Suit is built for the bold, for the racers who want to feel light, move fast, and stay protected. Don’t just imagine yourself crossing the finish line—make it a reality. Get your X-20 Drag Racing Suit today and feel the difference between a race and a victory!

Competition Motorsport is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most Girodisc products the same or next business day to ensure we meet your delivery deadline. Fits Chevrolet Camaro ZL1 Gen 5 The Girodisc system is a direct replacement for the OE disc, they will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The central hat section of the Girodisc rotor is made from strictly USA-sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved-vane design, developed in racing to act as a centrifugal pump forcing cool air through the disc. The disc and hat have a floating mount system, which utilizes 12 high-strength alloy steel drive pins, manufactured in the US by Girodisc and cadmium plated for long-lasting corrosion resistance. These pins take the loads from braking while maintaining the axial and radial float between the hat and disc. They are secured by class 12.9 cap screws and hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise springs on the disc side, allowing the iron disc to expand as it heats up while eliminating the rattle and noise commonly associated with floating rotors. This float also allows the rotor to self center between the brake pads. Once the Girodisc system is in place, you simply replace the cast iron discs when needed. This reduces cost over time by allowing you to re-use the aluminum central hats. Sold/priced per pair

Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Corvette C8 The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

A1-242 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Corvette Z51 (C8), Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by class 12.9 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

BBS RE-V Die-Forged Series Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. The Die-Forged Series of wheels by BBS offers exceptional weight savings through industry-leading FEM analysis without compromising design or build quality. Available in a wide range of sizes, finishes and bolt patterns, the Die-Forged Series from BBS has something for everyone. Available in Diamond Silver with protective top coat only. FEATURES One-Piece Die Forged Aluminum Wheel BBS Patented Milling Process inside the spoke area Weight optimized by FEM analysis WHEEL WEIGHTS 19x9.0: 23.9 lbs. 19x10.0: 25.0 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

A1-139 Girodisc Two-Piece Front Brake Rotors FITMENT: Renault Megane III RS, Front (2017+) This 350mm Girodisc system is a direct replacement for the OEM 340mm Renault rotors, no modifications are necessary. The rotors will bolt directly to the car and work with your OEM calipers using the supplied billet spacers to accommodate the 10mm larger Girodisc rotors. By upgrading your brakes with lightweight high performance replacements (as opposed to a big brake kit), your factory brake bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx. 22.0 lbs. vs. 25.2 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. Fits Lamborghini Gallardo 2004-2008 The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc system is an upgrade to a 380MM 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces, the reduction in rotational and unsprung weight (approx. 8 lbs) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF1 Racing fluid (also available from CompetitionMotorsport.com), you have an amazing solution to cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.   Sold/Priced per pair.

Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight (7 lbs per corner) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

A1-039 Girodisc Two-Piece Front Brake Rotors FITS: Chevy Camaro Gen 5 front (2010-2015) Competition Motorsport is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Gen 5 Camaro front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and Competition Motorsport RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair.

Paragon Viking Extreme 110V Multi-Person Cooler Paragon’s 57L Viking Extreme multi-person 110V cooler is a terrific multi-person coolre for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme is so great on those sweltering race days, we would go so far as to get a generator just to plug in a Paragon Extreme cooler. The large-capacity Paragon Viking Extreme cooler is built to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity American-made cooler works exclusively with Paragon cooling garments. A Cool Race Crew Is A Safe, Effective Crew The Paragon Viking Extreme Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change. Paragon Viking Extreme Cooler Details Manufacturer: Paragon Manufacturer part no.: 52-23000 Cooler capacity: 57 liters Operating voltage: 110V Dimensions (external): 20"L x 20"W x 20"H Weight (dry): 29 lbs Cooling garment connections: 6 outlets/inlets

Bell Racing GT6 RD 4C/EC Auto Racing Helmet IMSA Comms, Hydration, and ZeroNoise® in a Race-Ready Shell Built for serious endurance and GT drivers, the Bell Racing GT6 RD 4C/EC Helmet brings full comms and hydration integration into a track-ready shell without compromise. With its titanium finish, aggressive HP6-derived design, and wide eye port for visibility in tight cockpits, this is the helmet for those who treat every lap like a qualifying session. The GT6 RD 4C/EC is ready for IMSA communication and hydration systems right out of the box—because seconds count, even off the throttle. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). In the case of this Carbon-4C/EC model, the helmet is a Carbon Composite 4-layer shell with EC (electronic comms) kit integration. Features: Integrated IMSA Radio & Hydration System: Comes pre-installed with electronics and tubing for plug-and-play connection to your team’s radio and drink system. 4C/EC Carbon-Glass Composite Shell: Lightweight and high-strength, built from premium carbon-glass for optimal energy absorption and all-day wearability in long stints. ZeroNoise® Advanced Electronics: Equipped with high-power speakers, a noise-canceling microphone, and superior sound insulation for crisp in-car communication even in loud environments. Wide Eyeport: Offers exceptional lateral and vertical visibility, ideal for closed-cockpit racing where every degree of vision matters. Track-Proven Ventilation: Strategically placed intake ports can be connected to cooling systems for maximum airflow in hot race conditions. Standards: Dual certified to FIA 8859-2015 and Snell SA2020 for maximum track-day and competition eligibility. Bell Racing GT6 RD Carbon 4C/EC Helmet FAQs: What’s the difference between the GT6 and the GT6 RD? The GT6 RD includes factory-installed IMSA radio comms and hydration ports, while the standard GT6 does not. Is this compatible with ear buds or over-ear speakers? Yes, the 4C version supports both ear cups and ear buds depending on your personal or team setup. Uses IMSA connections. What is ZeroNoise® and why does it matter? ZeroNoise® is Bell's advanced audio platform, engineered for crystal-clear in-car communication with minimal distortion and maximum driver focus. Can I use this helmet for endurance racing? Absolutely. With comms, hydration, and a lightweight carbon-glass shell, it's made for long hours in the car at high intensity. The Bell GT6 RD 4C is the pro’s choice when comfort, comms, and clarity matter most. From sprint races to 24-hour stints, this helmet brings together titanium-level fit, cutting-edge audio, and pure performance.

Bell GT6 Rally Full Face Helmet Revolutionize Your Rally Racing with the Bell GT6 Rally Introducing the Bell GT6 Rally Full Face Helmet, the epitome of rally racing innovation and design excellence. This helmet not only draws inspiration from the legendary Bell HP6 Rally but also introduces advanced features that set it apart. Built for the modern rally racer, the GT6 Rally is equipped with a fully integrated ZeroNoise® radio communication kit, enabling seamless integration of the helmet into your intercom system. The GT6 Rally makes it easy to communicate with your pit crew and co-driver during those intense off-road races. Stay in the loop, strategize, and react swiftly to changing conditions, all while keeping your focus on the track. Crafted with precision and backed by Bell's decades of motorsports experience, the Bell GT6 Rally Full Face Helmet is your ticket to dominating the rally circuit, blending heritage and cutting-edge technology for a winning combination. Whether you're a seasoned pro or an aspiring rally racer, gear up with the GT6 Rally and elevate your performance on the track. Bell GT6 Rally Full Face Helmet Features FIA 8859-2015 and Snell SA2020 approved Exterior: gloss white or matte black Interior: dark grey high-strength Comfort FR® fabric Lightweight premium carbon fiberglass composite shell Pre-installed HANS post anchors Built-in ZeroNoise® intercom headset: high-quality speakers, sound-absorbing ear cups, and a noise-canceling mic for excellent communication clarity Wide eye-port for optimal vision in closed cockpit cars Advanced multi-density, multi-part liner maximizes energy absorption and impact performance Multiple air-extraction vents maximize airflow to evacuate heat and humidity from the helmet interior Short sun visor included Sizes: 6 3/4 (54 cm) to 7 5/8+ (61+ cm)