Girodisc
Girodisc Rear Caliper Rebuild Kit Porsche 991 C2S-C4S
$69.00
PORSCHE 991 C2S/C4S REAR CALIPER REBUILD KIT
Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.)Ā This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition.
One kit is required per caliper (we suggest doing them both as long as you're doing it).Ā Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds.Ā The shields and seals are available as a kit for convenience (and a bit of savings).
We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously.Ā Any questions give us a call, we're happy to help!
Girodisc
Girodisc Front Caliper Rebuild Kit Porsche 981 Boxster S-Cayman S
$69.00
PORSCHE 981 BOXSTER S/CAYMAN S FRONT CALIPER REBUILD KIT
Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.)Ā This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition.
One kit is required per caliper (we suggest doing them both as long as you're doing it).Ā Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds.Ā The shields and seals are available as a kit for convenience (and a bit of savings).
We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously.Ā Any questions give us a call, we're happy to help!
Girodisc
Girodisc Rear Caliper Rebuild Kit Porsche 981 Boxster S-Cayman S
$69.00
PORSCHE 981 BOXSTER S/CAYMAN S REAR CALIPER REBUILD KIT
Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.)Ā This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition.
One kit is required per caliper (we suggest doing them both as long as you're doing it).Ā Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds.Ā The shields and seals are available as a kit for convenience (and a bit of savings).
We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously.Ā Any questions give us a call, we're happy to help!
NecksGen
Sparco Helmet kit AIR/SKY
$64.00
Replacement hardwares for our Air Pro and Sky RF full face helmets
Air/Sky Helmet Visor Fastener Kit by Sparco .This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship.Manufactured from industry-leading ...
Rigorously tested to withstand years of abuse
Built for maximum strength and endurance
Designed and manufactured using innovative technologies
Ā
Ā
Chillout Systems
Chillout Systems Mounting Trays
from $64.00
Select from the options here to get the right mounting tray for your Chillout Systems Quantum Cooler (v3 or Pro).
AiM Sports
AiM Sports Solo 2-Solo 2 DL Suction Mount
$64.00
RAM Windshield Suction Mount
Among the great advantages to the AiM Solo family of GPS lap timers is that, unlike other timers, you don't have to connect any wires to use it. That makes it ideal for use in daily-driven track-day cars (or for moving from one car to another). The RAM windshield mount lets you to mount your AiM Solo2 or Solo2 DL (and older Solo versions) to your windshield quickly and securely. Installation is as easy as pushing a lever; removal is as easy as lifting the lever.
Two pivoting ball joints allow a wide range of adjustment. Two 6mm screw holes match the holes in the standard mounting plate included with your AiM Solo2 or Solo2 DL.
There's no better, more convenient way to mount your AiM Solo2 / Solo2 DL.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars ZX v3 Nomex Socks
$64.00
$93.00
Alpinestars ZX v3 Nomex Socks
These nomex socks from Alpinestars' advanced ZX base layer series were developed with a compression design for enhanced performance. Lightweight and comfortable, these ZX v3 socks incorporate elastane fiber for comfort and freedom of movement.
PROTECTION
Certified to the new FIA 8856-2018 homologation standard.Ā
Racing Optics
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStackā¢ 10 (Clear)
$63.00
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStackā¢ 10 (Clear)
The Perimeter Seal system is the latest technology from Racing Optics which allows for a tighter seal to visor, blocking out dirt, dust and water from behind the stack.Ā
The XStackā¢ is a stack of 10 laminated Tearoffs that are 2 mil thick each.
The laminated technology creates a distortion-free optical lens.
Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
Fits: (Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield) / (Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ) / (RJS) / (G-Force: Revo, Rift, Rookie)
Racing Optics
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
$63.00
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields
Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide
Fits Bell:
Bell 287 SRV Shields
Bell GTX.2 Helmets
Bell GP.2 Helmets
Bell Star Infusion Helmets
Bell Dominator.2 Helmets
Bell M.8 Composite SA2015/SA2020
Bell M.8 Carbon SA2015/SA2020
Fits Roux:
R-1 Fiberglass
R-1 Composite
R-1 Gloss Carbon
R-1 Matte Carbon
Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
OMP
OMP KS-3 Kart Racing Glove
$59.00
$84.00
OMP KS-3 Kart Racing Glove
KS-3 kart gloves are made of abrasion-resistant and comfortable strech fabric. Synthetic leather palms with silicon rubber inserts give you excellent grip. The elastic wrist stop increases comfort, with rubber protection on the knuckles.
Lifeline
Lifeline Heat Detection Cable - Protectowire 356F - 180C
from $59.00
Heat Detection Cable Protectowire 356oF / 180oC
Priced by the Meter
Protectowire is an electrical circuit containing heat-sensitive materials. When the outer covering melts, the wires will make contact and complete the circuit, activating the fire system. This can be a critical extra safety feature especially if the driver becomes incapacitated in an accident.
MOUNTING:
Mount along the ceiling of the cabin using an "S-pattern".
Some additional wiring may be required between the Protectowire and your system's electrical trigger.
Use care to not crimp or crease the outer sheath and create a weak spot.
Keep away from heat sources including the engine compartment, transmission, differential, exhaust, direct sunlight, or hot surfaces.
Keep away from any sharp edges that could cut or cause an abrasion on the sheathing.
An inline plug can be used to disconnect the sensor cable during storage, transport, etc.
The cable we sell is set to trigger at 356Ā°F (180Ā°C).Currently, Protectowire is only compatible with Lifeline electric systems.
Sparco
Sparco X-Cool Recharge Kit
$57.00
Sparco X-Cool Recharge Kit
The easy-to-apply Sparco X-Cool Recharge Kit helps revive your Sparco fire suit or nomex underwear to it's original high-temperature performance. Simply add to your washing machine along with your performance apparel.Each kit can treat one Sparco fire suit or one complete set of Sparco nomex underwear (balaclava, shirt, pants and socks).
SKU: 001157RECHARGE
Allstar Performance
Allstar Performance SFI 45.1 Roll Bar Padding
$57.00
Allstar Performance SFI 45.1 Roll Bar Padding
Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications.
Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging fromĀ 1Ā 1/4 inches to 1Ā 3/4 inches in diameter.
Allstar Performance Roll Bar Padding Details:
Manufacturer: Allstar Performance
Thickness: 0.75 inches
Length:Ā sold in individual 36-inch lengths
Maximum Bar Diameter: 1.75 inches
Minimum Bar Diameter: 1.25 inches
Certification: SFI 45.1
Attachment: attaches to roll bar with adhesive backing
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars Tech-1 K Race v2 Graphic Karting Gloves
$57.00
$71.00
Alpinestars Tech-1 K Race v2 Graphic Karting Gloves
This lightweight karting glove features a new construction of polyester bonded with polymesh to offer superb levels of durability, comfort, fit and feel, and has internal seams and synthetic suede leather on the palm to allow for excellent levels of comfort, feel and grip.
There are also mesh fourchettes on half of the fingers and lycra on the other half for the perfect blend of ventilation, flexibility and comfort, with a silicon surface treatment on the palm and fingers for improved flexibility and control. It is also equipped Alpinestars open cuff design with a 180Ā° elasticated wrist for easy entry and a secure fit, and a touch compatible print on thumb and index fingers for using mobile devices while at the track.
CONSTRUCTION
Lightweight, polyester-mesh provides optimum feel and enhanced comfort in warm weather.
New ergonomically designed silicone print on palm areas for improved mobility and grip.
Synthetic suede material on palm for enhanced durability.
KEY FEATURES
Touchscreen compatible fingertips.
Mesh and lycra fourchettes promote comfort, airflow and durability.
Pre-curved finger and palm aids fit while reducing material bunching.
Gauntlet cuff incorporates a 180Ā° elasticated wrist for easy entry and a secure fit.
Digital print on surface for an aggressive aesthetic.
Racing Optics
Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack
$57.00
Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stackā¢ 10 (Clear)
The XStackā¢ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
RAO-10206CĀ Fits:
Bell: Dominator.3, GTX.3, GP.3, GT.5 Touring, HP.3, HP5 Touring, B2 Apex, B2 Vision, SE03 Shield, SE05 Shield
ROP10203C Fits:
HJC H10 & AR10-III
Alpinestars
Alpinestars Engine Pit Gloves
$57.00
Alpinestars Engine Pit Gloves
The Engine Glove is a hybrid multi-material glove which offer high levels of comfort and protection. Soft, lightweight and flexible, the glove has mesh panels for optimum levels of breathability, while the tough synthetic suede leather palm means it is highly durable. Itās also reassuringly protective thanks to the strategically positioned TPR on the knuckles. Another neat feature is the conductive print on the palm and fingers which allows mechanics to operate a tablet while wearing the gloves.
ALPINESTARS ENGINE PIT GLOVE KEY FEATURES
Advanced TPR knuckle insert offers impact protection without compromising dexterity.
Ergonomic stretch insert between thumb and palm and on backhand offers flexibility to vastly improve hand movement.
Sublimated, fade-resistant color on back of the hand for a distinctive look.
Synthetic suede thumb reinforcement for durability and seam reinforcement.
Touchscreen compatible fingertip for use with handheld devices.
Short cuff styling.
ALPINESTARS ENGINE PIT GLOVE CONSTRUCTION
Lightweight, multi-material glove incorporating a stretch mesh and stretch fabric on the top of the hand.
Stretch mesh and stretch fabric offer comfort and cooling performance.
Synthetic suede palm with padding provides grip, durability and tactility.
Hook and loop grip cuff closure on the back of the hand for a precise fit.
Strategic 2mm foam padding on fingers for fit and comfort.
