Ferodo FRP3152GB DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pads   Ferodo 11 FRP3152GB-N DS3.12 Porsche 991 GT3 Cup Car Rear Brake Pad Fitment: Porsche 991 911 GT3 Cup Car (Rear) Ferodo Brake Pad Compound DS3.12 The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. Ferodo 11 FRP3152GB-N Comparison Chart The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability. Ferodo 11 FRP3152GB-N Coefficient of Friction (Mu) Chart The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors. Ferodo 11 FRP3152GB-N Temperature Chart We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.

Performance Friction PFC Brake Pads 7969.XX.26.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 7969.XX.26.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 7969.XX.26.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 7969.XX.26.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. Fits the Following Cars (Rear Axle): Make Model Year Notes Porsche 911 991 GT3 Cup 2013 - 2019 Rear Porsche Cayman 981 GT4 Clubsport 2013 - 2019 Rear

Cobalt RC58 Racing Brake Pads (Rear) Cobalt RC58 Fits The Following Vehicles: Porsche 991 GT3 Cup Car  (2013-2019) Porsche 981/718 Cayman GT4 Clubsport (2016-2022) Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Pagid Racing Brake Pad Shape 4921 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 GT3 Cup [PFC calipers 22/20 mm] 2013 + X Porsche 991 GT3 Cup MR [PFC calipers 22/20 mm] 2013 + X Porsche Cayman GT4 Clubsport [PFC calipers 22/20 mm] 2016 + X Porsche Cayman GT4 MR [PFC calipers 22/20 mm] 2016 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Pagid Racing Brake Pad Shape No. 4929 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 GT3 Cup [PFC calipers 28/26 mm] 2013 + X Porsche 991 GT3 Cup MR [PFC calipers 28/26 mm] 2013 + X Porsche Cayman GT4 Clubsport [PFC calipers 28/26 mm] 2016 + X Porsche Cayman GT4 MR [PFC calipers 28/26 mm] 2016 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL D1 Compound Pagid RSL D1 compound was engineered especially for race cars with high aerodynamic downforce levels, and with a wide brake balance range. Specifically developed for rear axle applications, the compound provides benefits in terms of vehicle stability during turn-in and unloading the front axle on corner exit. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST D1 Compound: Pagid RST D1 is especially for race cars with high aerodynamic downforce levels and with a wide brake balance range. Specifically developed for rear axle applications. The RST D1 compound provides benefits in terms of vehicle stability during the turn-in and corner-exit unloading of the front axle.

Girodisc Brake Pad Spreader The Right Tool for the Job This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Built Like a Tank. Works Like a Charm. Insert the spreading plates one way for wider six-piston calipers, or turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. It will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

Spiegler Stainless Brake Lines - Porsche Front 2 Line Kit  Fitments include 991 GT3 Cup Car Front Spiegler 100% stainless front brake lines for the Porsche 991 GT3 Cup Car. WHY SPIEGLER, AND NOT BRAND X?While we're not the first to create a six line kit, we have created the best one. The quality of the Spiegler components is a cut above the competition in all regards, and you can see the superior precision of the components in the pics below. Spiegler uses 100% stainless steel fittings machined from billet, and all fittings are attached with Spiegler's exclusive stress-free torsion system. That means the lines can be twisted or turned 360 degrees after they've been attached without placing any stress on the line or fitting. The components for Spiegler lines are imported from Switzerland, and the lines are assembled and tested in Dayton Ohio. The result is a brake line of unparalleled strength, durability, and reliability. For less than the price of a set of brake pads you can have the added convenience, feel, and confidence that Essex and Spiegler bring to the table.  Features All components manufactured in USA and Europe Stress-free Torsion Fitting System. Abrasion resistant coating/sheath Aircraft quality stainless steel fittings and bolts. Heavy gauge, tightly woven stainless steel braid Stringent and consistent quality control Du Pont PTFE- Teflon® lining DOT compliant Full testing battery on all parts, with lifetime warranty  Benefits Allows 360 degree rotation of banjo fitting for correct alignment and strain reduction Eliminates snagging and chafing Superior strength, longevity, and safety Eliminates line swell, more consistent feel Reduces line expansion and provides greater durability Quality assurance, road legal Allows for personalization Purchase and drive with confidence

Spiegler Stainless Brake Lines - Porsche Rear 2 Line Kit Fitments include Most Porsche Models Spiegler 100% stainless front or rear brake lines for various Porsche models. ***DOES NOT REMOVE/REPLACE REAR CALIPER HARD LINE***  These line kits were revised to retain the rear hard line on these applications. On the rear calipers, the hard line bracket is bolted to the caliper and therefore does not need to be disconnected in order to remove the caliper for a brake pad change. Features All components manufactured in USA and Europe Stress-free Torsion Fitting System. Abrasion resistant coating/sheath Aircraft quality stainless steel fittings and bolts. Heavy gauge, tightly woven stainless steel braid Stringent and consistent quality control Du Pont PTFE- Teflon® lining DOT compliant Full testing battery on all parts, with lifetime warranty  Benefits Allows 360 degree rotation of banjo fitting for correct alignment and strain reduction Eliminates snagging and chafing Superior strength, longevity, and safety Eliminates line swell, more consistent feel Reduces line expansion and provides greater durability Quality assurance, road legal Allows for personalization Purchase and drive with confidence

Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle

HALO P1 High Performance Brake Fluid The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles. Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.

AP Racing Radi-CAL R4 Racing Brake Fluid Among the Highest Dry Boilings Point On The Market Today AP Racing Radi-CAL R4 racing brake fluid has an ultra-high typical dry boiling point, at 644º F / 340º C. Radi-CAL R4 racing brake fluid has been designed to perform better than any other product at the extremes of heavy-duty braking in top levels of professional racing. AP Racing Radi-CAL R4 has outstanding resistance to vapor lock and pedal fade under the most exacting conditions. A higher vapor lock point means a firmer brake pedal at the extremes of brake temperatures. Enhanced lubricity means R4 is a better lubricant than other market-leading racing brake fluids. This helps extend the life of the metal moving parts in your brake system while increasing system efficiency. Radi-CAL R4 can be mixed with other DOT 3 and DOT 4 racing brake fluid, although for maximum performance your braking system should be thoroughly purged with R4 fluid. AP Racing Radi-Cal Pro R4 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP7005 DOT rating: DOT 4 Dry Boiling Point: 644º F / 340º C Wet Boiling Point: 383º F / 195º C Bottle Size: 500 ml (16.9 fl. oz.)