Auto Racing Driver Safety Gear at CMS – Page 34

Stilo ST5 FN ZERO Ultra ABP carbon racing helmet with FIA 8860-2018 ABP certification and exposed carbon fiber shell

Stilo S.r.l. Stilo ST5 FN ZERO Ultra ABP Carbon Helmet | FIA 8860-2018 $3,499.00 $7,875.00

Stilo ST5 FN ZERO Ultra 8860-2018 ABP Carbon Helmet The Stilo ST5 FN ZERO Ultra 8860-2018 ABP Carbon Helmet is engineered for drivers who demand an exceptionally lightweight helmet without sacrificing the highest levels of motorsport protection. Developed with input from Formula 1 driver Valtteri Bottas, the ST5 FN ZERO Ultra combines Stilo's ultra-light carbon fiber construction with the enhanced protection required by the FIA 8860-2018 ABP homologation standard. FIA 8860 certification is valid through 2032 on these ST5 FN ZERO ABP helmets. Every aspect of the ZERO Ultra has been optimized to reduce weight, from its advanced carbon shell construction to its expanded ventilation system. The result is a professional-level racing helmet built for drivers who want maximum protection, excellent airflow, outstanding visibility, and minimal helmet weight. FIA 8860-2018 ABP Protection The ST5 FN ZERO Ultra meets the demanding FIA 8860-2018 ABP certification standard. ABP, or Advanced Ballistic Protection, adds reinforced protection around the forehead area above the visor opening to help protect the driver from debris and other potential intrusion hazards. ABP helmets also use a visor opening that is approximately 10mm lower and narrower than comparable non-ABP designs. This additional protection makes the ST5 FN ZERO Ultra especially well suited for professional and high-level open-cockpit motorsport. Ultra-Light Carbon Fiber Construction Stilo's ZERO construction is designed around one goal: removing unnecessary weight while maintaining the structural performance required by FIA 8860-2018 ABP certification. The lightweight carbon fiber shell reduces the load placed on the driver's head and neck during long sessions, high-G corners, and demanding endurance events. The small shell weighs approximately 1.9 lbs and is used through size Large / 59cm. Eight-Port Ventilation System The ST5 FN ZERO Ultra incorporates eight ventilation openings across the top of the helmet to increase airflow around the driver's head. These ventilation ports can also be used with a compatible Stilo ST5 top-air system, allowing racers to add forced-air cooling for enclosed race cars and demanding cockpit environments. FN Design for a Clean, Lightweight Helmet Unlike Stilo's ST5 GT models, the ST5 FN ZERO Ultra does not incorporate communication or hydration ports into the sides of the helmet. This creates an exceptionally clean shell design focused on minimum weight and maximum performance. The helmet can still accommodate equipment such as a top forced-air system and helmet removal system. Stilo incorporates provisions for these systems during manufacturing so they can be added without bulky external components interfering with the driver's cockpit environment. Optimized Visibility The ST5 FN ZERO Ultra uses Stilo's carefully designed eye port to provide excellent forward and peripheral visibility while maintaining the additional forehead protection required for ABP homologation. Stilo's center pinch-clip visor locking system allows the shield to be opened and closed quickly and securely, even while wearing racing gloves. HANS and FHR Ready The Stilo ST5 FN ZERO Ultra includes HANS post anchors, making the helmet ready for use with compatible Head and Neck Restraint systems. The factory-installed anchor system eliminates the need to purchase and install separate posts before using the helmet with an approved FHR device. Improved Cheek Pad Comfort Redesigned cheek pads provide a more contoured fit than earlier Stilo helmet designs. The updated shape improves support around the driver's face while maintaining the comfort required for long track sessions and endurance racing. Compatible With Stilo ST5 Shields All Stilo ST5 helmet shields are compatible with the ST5 FN ZERO Ultra, giving drivers the ability to configure the helmet with clear, tinted, mirrored, and other compatible visor options depending on track conditions and personal preference. Stilo ST5 FN ZERO Ultra Features FIA 8860-2018 ABP homologated FIA certification valid through 2032 on these helmets Advanced Ballistic Protection for increased forehead protection Ultra-light Stilo ZERO carbon fiber shell construction Approximately 1.9 lb small-shell weight through size Large / 59cm Eight top ventilation openings Compatible with Stilo ST5 top forced-air systems Factory-installed HANS post anchors Compatible with Head and Neck Restraint systems Redesigned contoured cheek pads Center pinch-clip visor locking system Compatible with all Stilo ST5 shields Provision for compatible helmet removal systems Includes Stilo Helmet and HANS Bag Available in sizes 54cm through 59cm ST5 FN ZERO Ultra vs. ST5 GT ZERO The primary difference between the ST5 FN ZERO Ultra and the ST5 GT ZERO is the side-port configuration. The ST5 FN ZERO Ultra eliminates the integrated side communication and hydration ports found on the GT version, creating a cleaner and lighter helmet configuration. Drivers who require integrated side ports for communications or hydration may prefer the ST5 GT ZERO, while drivers focused on minimum weight and a streamlined shell may prefer the FN ZERO Ultra. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo Shields use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. Professional-Level Racing Helmet The Stilo ST5 FN ZERO Ultra is designed for serious racers who want one of Stilo's lightest and most advanced ABP-certified racing helmets. Its combination of carbon fiber construction, FIA 8860-2018 ABP protection, advanced ventilation, HANS compatibility, and lightweight design makes it an exceptional choice for high-level motorsport competition. Stilo ST5 FN ZERO Ultra ABP Carbon Helmet Sizing Chart Stilo ST5 FN ZERO Ultra ABP Carbon Helmet Questions & Answers What certification does the Stilo ST5 FN ZERO Ultra have?The helmet is homologated to the FIA 8860-2018 ABP standard. How long is the FIA certification valid?The FIA 8860 certification on these ST5 FN ZERO ABP helmets is valid through 2032. What does ABP mean?ABP stands for Advanced Ballistic Protection. It adds reinforced protection above the visor opening to help protect the driver from debris and potential intrusion impacts. How much does the ST5 FN ZERO Ultra weigh?The small shell weighs approximately 1.9 lbs and is used through size Large / 59cm. Does the ST5 FN ZERO Ultra include HANS posts?Yes. Standard HANS post anchors are included and installed on the helmet. Can a forced-air system be added?Yes. The eight top ventilation openings can be used with a compatible Stilo ST5 top forced-air system, sold separately. What is the difference between the ST5 FN ZERO Ultra and ST5 GT ZERO?The FN version does not have the integrated side ports found on the GT model. This gives the FN ZERO Ultra a cleaner configuration focused on reduced weight, while the GT ZERO is designed for drivers who need integrated communication or hydration connections. Are Stilo ST5 shields compatible with this helmet?Yes. Stilo ST5 helmet shields are compatible with the ST5 FN ZERO Ultra. Does the helmet include a helmet bag?Yes. A Stilo Helmet and HANS Bag is included. What sizes are available?The ST5 FN ZERO Ultra is available in sizes covering 54cm through 59cm. Does this helmet require a signature for delivery?Yes. A signature is required when this helmet is delivered. For the GT version of this helmet (with integrated side ports), please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Fiber Helmet.

Sabelt S.p.A. Sabelt LASER TB-3 Race Shoe $359.00

Sabelt LASER TB-3 Race Shoe The Sabelt LASER TB-3 Race Shoe is a lightweight, breathable, and comfortable racing shoe engineered for serious drivers who want maximum pedal feel with FIA-approved protection. Built with an ultra-thin leather exterior, flexible construction, and FIA 8856-2018 homologation, the LASER TB-3 delivers the sensitivity and control needed for competition driving. Designed for comfort during long sessions, the LASER TB-3 combines perforated leather, integrated stretch panels, and a wide platform sole to improve airflow, fit, stability, and grip. The result is a race shoe that feels light and responsive without sacrificing support or protection. Sabelt LASER TB-3 Race Shoe Features FIA 8856-2018 homologated for motorsport competition use. Ultra-thin leather exterior designed for high pedal sensitivity. Lightweight construction helps reduce driver fatigue. Flexible chassis improves comfort and natural foot movement. Integrated stretch panels provide a glove-like fit. Wide platform sole increases stability and driving confidence. Perforated leather upper improves breathability and reduces heat buildup. Designed for precise braking, throttle modulation, and pedal control. Ideal for track days, club racing, endurance racing, and professional motorsport. Ultra-Thin Leather for Pedal Feel The LASER TB-3 uses an ultra-thin leather exterior to help drivers feel the pedals with greater precision. This construction improves sensitivity under braking and throttle inputs, making it easier to manage small pedal movements during corner entry, mid-corner balance, and acceleration. Breathable Perforated Upper Perforations throughout the leather upper help improve ventilation and reduce heat buildup inside the shoe. This added airflow makes the LASER TB-3 a strong option for hot track days, long race stints, and demanding cockpit conditions. Flexible Comfort Fit Integrated stretch panels allow the shoe to move naturally with the foot, creating a more comfortable and secure fit. The flexible construction helps reduce pressure points while maintaining the close fit racers need for confident pedal work. Wide Platform Sole for Stability The wide platform sole is designed to improve stability, grip, and overall driving confidence. It gives the driver a planted feel while maintaining the responsiveness needed for smooth throttle modulation and precise brake control. FIA 8856-2018 Approved Protection The Sabelt LASER TB-3 Race Shoe is FIA 8856-2018 homologated, making it suitable for motorsport events that require FIA-approved racing footwear. It combines modern safety compliance with the lightweight feel and comfort expected from Sabelt racing gear. Sabelt LASER TB-3 Race Shoe Specifications Approval: FIA 8856-2018 Upper Material: Ultra-thin leather Ventilation: Perforated leather upper Fit: Integrated stretch panels Sole: Wide platform sole for stability and grip Construction: Lightweight and flexible race shoe design Use: Auto racing, track days, club racing, endurance racing, and competition driving Sabelt LASER TB-3 Race Shoe Sizing Chart Sabelt LASER TB-3 Race Shoe FAQs What makes the Sabelt LASER TB-3 different from other Sabelt race shoes?The LASER TB-3 uses an ultra-thin leather shell and a wider sole platform to deliver strong pedal feel, stability, and comfort compared with bulkier racing shoe designs. Is the Sabelt LASER TB-3 suitable for endurance racing?Yes. The breathable perforated leather upper, stretch panels, and flexible construction make the LASER TB-3 comfortable for longer driving sessions and multi-hour stints. How does the sole grip feel?The wide platform sole provides strong pedal traction while still allowing smooth throttle modulation and precise pedal control. Does the Sabelt LASER TB-3 run true to size?Most drivers report a true-to-size fit. If you are between sizes and prefer a tighter race fit, sizing down may be considered. Does this shoe breathe well in hot conditions?Yes. The perforated leather upper helps improve ventilation, reducing heat and sweat buildup during warm race days. Is the Sabelt LASER TB-3 FIA approved?Yes. The Sabelt LASER TB-3 Race Shoe is FIA 8856-2018 homologated for motorsport competition use.

Alpinestars Alpinestars SP v3 Racing Shoes $199.95

Alpinestars SP v3 Racing Shoes The Alpinestars SP v3 Racing Shoes deliver a refined combination of comfort, protection, and responsive pedal control for competitive auto racing. An anatomically profiled design provides a secure performance fit, while the lightweight racing outsole helps drivers maintain precise control over the brake, throttle, and clutch pedals. The premium suede upper offers excellent flexibility, durability, and comfort. Perforated suede across the tongue improves airflow, helping reduce heat buildup during demanding sprint races, endurance events, autocross, HPDE sessions, and track days. A heat-resistant para-aramidic fiber lining adds strength and protection without unnecessary weight. Lightweight microporous padding around the heel and insole provides additional cushioning, while the reinforced heel counter improves lateral stability under braking and rapid pedal transitions. Premium Suede Construction The SP v3 upper is constructed from premium suede selected for its balance of flexibility, durability, and comfort. Its soft construction allows the shoe to conform closely to the foot while maintaining the support required for accurate pedal operation. Anatomically Profiled Fit Alpinestars uses an anatomically shaped design to create a close, responsive fit around the foot. This streamlined profile helps reduce unnecessary movement inside the shoe and makes it easier to operate closely spaced racing pedals. Improved Ventilation Perforated suede on the tongue promotes airflow through the shoe. The breathable construction helps manage heat and moisture during long driving sessions without adding bulky ventilation materials. Heat-Resistant Para-Aramidic Lining A para-aramidic fiber tubular lining provides excellent heat resistance, structural strength, and lightweight protection. The lining surrounds the foot while maintaining the flexibility needed for smooth and precise pedal inputs. Lightweight Heel and Insole Padding Microporous padding around the heel and insole improves comfort while keeping weight to a minimum. This cushioning helps reduce pressure and fatigue during extended periods behind the wheel. Reinforced Heel Support A compressed leather heel counter reinforces the rear of the shoe for improved protection and lateral stability. This supportive construction helps keep the heel properly positioned during hard braking and quick pedal transitions. Supportive Underfoot Construction A polypropylene lasting board works with leather reinforcement to provide underfoot support and comfort. The structure helps distribute pressure while preserving the sensitivity required from a professional racing shoe. Responsive Alpinestars Racing Sole The exclusive Alpinestars racing outsole uses a lightweight rubber compound with a textured grip pattern. Its low-profile construction provides dependable pedal traction and direct feedback through the brake, throttle, and clutch pedals. Alpinestars SP v3 Racing Shoe Features Premium suede upper for flexibility, comfort, and durability Anatomically profiled racing fit Perforated suede tongue for improved ventilation Heat-resistant para-aramidic fiber tubular lining Lightweight microporous heel and insole padding Compressed leather heel counter Improved lateral stability and heel support Polypropylene lasting board Leather underfoot reinforcement Lightweight Alpinestars rubber racing outsole Textured sole pattern for dependable pedal grip Low-profile design for responsive pedal feedback FIA 8856-2018 homologated Technical Specifications Product: Alpinestars SP v3 Racing Shoes Manufacturer: Alpinestars Upper Material: Premium suede Tongue: Perforated suede Lining: Para-aramidic fiber tubular construction Padding: Lightweight microporous material Heel Counter: Reinforced compressed leather Lasting Board: Polypropylene with leather reinforcement Outsole: Lightweight textured rubber racing sole Certification: FIA 8856-2018 Alpinestars SP v3 Racing Shoes Sizing Chart Frequently Asked Questions Are the Alpinestars SP v3 Racing Shoes FIA approved? Yes. The Alpinestars SP v3 Racing Shoes are homologated to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing organization, class, and event. What are the Alpinestars SP v3 Racing Shoes made from? The upper is constructed from premium suede with a perforated suede tongue. The interior uses a heat-resistant para-aramidic fiber tubular lining. How do the Alpinestars SP v3 Racing Shoes fit? The SP v3 has an anatomically profiled, performance-oriented fit designed to hold the foot securely and improve pedal feedback. Racing shoes should fit snugly without causing painful pressure points or restricting circulation. Are the Alpinestars SP v3 Racing Shoes breathable? Yes. Perforations in the suede tongue help circulate air through the shoe and reduce heat buildup during demanding driving sessions. Do the SP v3 Racing Shoes provide good pedal feel? Yes. The lightweight, low-profile rubber outsole is designed to provide direct pedal feedback, while its textured grip pattern helps maintain secure contact with the pedals. What does the reinforced heel counter do? The compressed leather heel counter supports the rear of the foot and improves lateral stability during hard braking, shifting, and rapid pedal transitions. Are these shoes suitable for HPDE and track days? Yes. Their secure fit, breathable construction, supportive heel, and responsive outsole make them suitable for professional competition, club racing, autocross, time trials, HPDE events, and track-day driving. Can the Alpinestars SP v3 be used for karting? The SP v3 can be worn for some karting applications, but it is designed and certified as an auto racing shoe. Karting-specific footwear may provide an outsole better suited to walking through kart paddocks and pit areas. How should I care for suede racing shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Use a soft suede brush for light cleaning and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Comfort, Protection, and Precise Pedal Control The Alpinestars SP v3 Racing Shoes combine premium suede, breathable construction, lightweight cushioning, reinforced heel support, and a responsive racing outsole. Their FIA-approved design provides the comfort, control, and protection required by competitive drivers and serious track-day enthusiasts.

OMP Sport black and red racing glove facing right on a white background

OMP Racing OMP Sport Nomex Gloves (New Style!) | FIA 8856-2018 $119.00

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide modern FIA-certified protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Designed for drivers who need certified fire-resistant gloves without unnecessary bulk, the OMP Sport combines a silicone-printed palm, flexible construction, and an elastic wrist opening for a secure, straightforward fit. Certified to FIA 8856-2018, these gloves are built for competitive motorsport while remaining comfortable enough for extended driving sessions. Multiple color options make it easy to coordinate the OMP Sport Gloves with your racing suit, shoes, helmet, or team colors. Lightweight Fire-Resistant Racing Gloves The OMP Sport is designed to provide essential protection without making the glove feel heavy or restrictive. Its lightweight fire-resistant construction allows natural finger movement and helps reduce hand fatigue during longer sessions. The streamlined design also minimizes unnecessary material between the driver and the steering wheel, supporting clear feedback and precise control. Silicone-Printed Palm Grip A silicone grip pattern is printed directly onto the palm to improve traction against the steering wheel. The low-profile application provides a secure hold without adding the thickness of a separate reinforcement layer. The printed silicone helps the driver maintain consistent control during braking, cornering, shifting, and repeated steering corrections while preserving sensitivity through the wheel. Reliable Grip as Temperatures Rise Steering wheels and cockpit surfaces can become warm during extended sessions. The silicone-printed palm helps maintain traction as temperatures increase, reducing the need to squeeze the wheel excessively. A more relaxed grip can improve comfort and help the driver maintain smoother steering inputs over the course of a race or track session. Elastic Wrist Entry An elasticated wrist opening makes the OMP Sport Gloves easy to put on and remove while maintaining a snug fit once worn. The strapless design avoids bulky closures and allows clean overlap with a compatible racing suit sleeve. The elastic wrist also helps prevent the glove from shifting during aggressive steering inputs or rapid cockpit movements. Comfort for Extended Driving Sessions The OMP Sport Gloves are shaped to remain comfortable during prolonged use. Their lightweight materials and uncomplicated construction allow the hand to flex naturally around the steering wheel, shifter, and cockpit controls. The glove’s close fit helps reduce excess material at the fingertips and palm, improving dexterity without sacrificing fire-resistant coverage. FIA 8856-2018 Homologated Protection The OMP Sport Gloves are certified to the FIA 8856-2018 homologation standard for protective clothing used in automobile competition. This certification makes them suitable for racing organizations and events that require current FIA-approved fire-resistant driver gloves. Drivers should confirm the specific equipment rules of their sanctioning organization before competition. OMP Sport Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone-printed palm provides dependable steering-wheel grip Low-profile grip pattern preserves steering sensitivity Elastic wrist allows easy entry and secure retention Strapless design reduces bulk beneath the racing suit sleeve Comfortable construction for extended driving sessions Available in multiple color options FIA 8856-2018 homologated OMP Sport Racing Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Wrist: Elasticated entry Closure: Strapless Construction: Lightweight fire-resistant material Homologation: FIA 8856-2018 Accessible FIA-Certified Performance The OMP Sport focuses on the features drivers need most: certified fire protection, secure palm grip, comfortable wrist retention, and a lightweight feel. Its simple construction makes it a practical option for drivers purchasing their first FIA-approved gloves or replacing older equipment with a current homologation. For drivers who value straightforward performance and reliable protection, the OMP Sport delivers a strong balance of comfort, grip, and affordability. OMP Sport Nomex Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard. Can these gloves be used for wheel-to-wheel racing?Yes, provided the racing organization accepts FIA 8856-2018-certified gloves. Always confirm the current rules for your series or event. How do the OMP Sport Gloves fit?They follow OMP’s standard glove fit and should feel close around the fingers and palm without restricting movement. A snug new fit may relax slightly after several sessions. Do the gloves have silicone palm grip?Yes. Silicone is printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. Does the silicone maintain grip when the steering wheel becomes warm?Yes. The printed silicone is designed to provide consistent traction during extended driving sessions as cockpit temperatures increase. Do the OMP Sport Gloves have a wrist strap?No. An elasticated wrist opening keeps the gloves securely fitted without a separate adjustment strap. Are the OMP Sport Gloves comfortable for long sessions?Yes. Their lightweight construction and low-bulk palm design help reduce hand fatigue during extended driving. How should racing gloves fit at the fingertips?There should be minimal excess material beyond the fingertips. The gloves should fit closely without compressing the fingers or limiting movement.

Alpinestars Tech-M V2 black FIA pit crew glove facing right on a white background

Alpinestars Alpinestars Tech M V2 Crew Gloves $219.95

Alpinestars Tech-M V2 Crew Gloves The Alpinestars Tech-M V2 Crew Gloves are professional motorsport pit-crew gloves engineered for precision, protection, and dependable control during fast-paced service work. Designed for mechanics performing high-pressure tire changes and other demanding pit-lane tasks, these gloves combine flame-resistant Aramid materials with impact protection, reinforced grip, and an ergonomic fit. Impact-absorbing protection across the knuckles and fingers helps shield the hands during wheel changes, while reinforced palm and thumb areas provide the durability and control needed when operating high-torque wheel guns and heavy-duty tools. Built for Professional Motorsport Pit Crews The Tech-M V2 is designed specifically for motorsport mechanics and pit-crew members who require reliable hand protection without sacrificing dexterity. Its close, pre-curved construction allows the fingers and palms to move naturally during rapid wheel changes, repairs, adjustments, and repetitive mechanical tasks. The secure fit and tactile palm design help crews maintain control of tools, fasteners, wheels, and other equipment when every second matters. Flame-Resistant Aramid Construction The glove's main construction uses bonded, flame-resistant Aramid fiber to provide a strong balance of protection, comfort, and durability. This material helps protect the hands in professional motorsport environments where exposure to heat and flame is a potential risk. The lightweight construction preserves flexibility and tactile feedback, allowing mechanics to complete precise work without the heavy or restrictive feel associated with bulky protective gloves. Impact-Absorbing Knuckle and Finger Protection Silicone FRR-coated patches are positioned across the knuckles and fingers and backed by impact-absorbing foam. These protective zones help reduce the force of knocks and impacts that may occur while working around wheels, suspension components, tools, and confined pit-lane environments. The strategically placed protection is designed to safeguard vulnerable areas of the hand while preserving the flexibility required for accurate tool operation. Reinforced Thumb and Index Area A Kevlar-reinforced Aramid patch strengthens the high-wear area around the thumb and index finger. This reinforcement provides increased abrasion resistance where the glove regularly contacts wheel guns, sockets, handles, fasteners, and other equipment. The durable construction helps extend the working life of the glove during frequent professional use. Textured Leather Palm Grip Textured leather patches across the palm provide secure grip, shock absorption, and improved control. The palm construction is especially beneficial when operating high-torque wheel guns or handling heavy wheels and tools under demanding pit conditions. The additional grip reduces unwanted hand movement and helps crews maintain control without applying excessive gripping pressure, which can reduce fatigue during repetitive service work. Pre-Curved Ergonomic Fit The fingers and palm are pre-curved to follow the natural shape of the hand while gripping tools and equipment. This ergonomic design reduces material bunching and improves dexterity, allowing the glove to move naturally with the wearer. The close-fitting construction also improves tactile feedback when handling small fasteners, controls, connectors, and other components requiring precise movement. Secure 180-Degree Elasticated Wrist A 180-degree elasticated wrist provides a secure and comfortable fit while allowing the glove to be put on and removed quickly. An integrated silicone pull tab gives the wearer a dependable grip when pulling the glove into position. The streamlined wrist design helps keep the glove properly secured during rapid movements and repetitive pit-lane tasks. Professional Embroidered Finish Fully embroidered graphics provide a durable, professional appearance designed to withstand repeated use. The premium finish complements team uniforms and pit-crew apparel while maintaining the rugged construction required for competitive motorsport environments. FIA-Certified Pit-Crew Protection The Alpinestars Tech-M V2 Crew Gloves are certified to the FIA 8856-2018 homologation standard. This makes them suitable for professional motorsport applications requiring FIA-approved protective gloves. Teams and crew members should confirm the specific equipment requirements of their racing series or sanctioning organization before use. Alpinestars Tech-M V2 Crew Glove Features Designed specifically for professional motorsport pit crews and mechanics Bonded flame-resistant Aramid fiber main construction Lightweight design provides protection without restricting movement Silicone FRR-coated knuckle and finger patches Impact-absorbing foam protects vulnerable areas of the hand Kevlar-reinforced Aramid patch around the thumb and index finger Enhanced abrasion resistance in high-wear areas Textured leather palm patches provide secure tool grip Palm construction helps absorb shock and vibration Designed for high-torque wheel-gun operation Pre-curved fingers and palm reduce material bunching Ergonomic fit improves dexterity and tactile feedback 180-degree elasticated wrist provides a secure fit Silicone pull tab allows quick entry and removal Fully embroidered professional graphics FIA 8856-2018 certified Ideal for Pit-Lane and Mechanical Applications The Tech-M V2 is an excellent choice for tire changers, wheel-gun operators, race mechanics, and other crew members performing high-speed service work. Its combination of impact protection, abrasion resistance, grip, and flame-resistant construction makes it suitable for professional racing, endurance events, testing programs, and other demanding motorsport environments. Why Choose Alpinestars Tech-M V2 Crew Gloves? The Alpinestars Tech-M V2 Crew Gloves provide the protection professional mechanics need while preserving the dexterity required for precise and efficient work. Reinforced impact zones protect the knuckles and fingers, while the leather palm and reinforced thumb area deliver dependable durability and control. For pit crews seeking FIA-certified protection with a secure ergonomic fit, the Tech-M V2 delivers a professional balance of safety, comfort, grip, and responsiveness. Alpinestars Tech-M V2 Crew Glove Size Chart Frequently Asked Questions Who are the Alpinestars Tech-M V2 Crew Gloves designed for?They are designed specifically for professional motorsport pit crews, tire changers, wheel-gun operators, and mechanics working with heavy-duty tools and equipment. Are the Tech-M V2 Crew Gloves fire resistant?Yes. The main construction uses bonded flame-resistant Aramid fiber designed to provide protection in professional motorsport environments. What certification do these gloves have?The Alpinestars Tech-M V2 Crew Gloves are certified to the FIA 8856-2018 homologation standard. How do the gloves protect the knuckles and fingers?Silicone FRR-coated patches and impact-absorbing foam are positioned across the knuckles and fingers to help reduce impact forces. Are the palms reinforced?Yes. Textured leather palm patches improve grip, absorb shock, and provide additional durability during high-torque tool operation. Why is the thumb and index area reinforced?The thumb and index area experiences frequent contact with tools and equipment. A Kevlar-reinforced Aramid patch improves abrasion resistance in this high-wear zone. Are these gloves suitable for operating a wheel gun?Yes. The textured leather palm, impact protection, and ergonomic construction are designed to provide secure control during high-torque wheel-gun use. How does the pre-curved design improve comfort?The pre-curved fingers and palm follow the natural shape of the hand, reducing material bunching and improving dexterity when gripping tools. How does the wrist closure work?A 180-degree elasticated wrist creates a secure fit, while the silicone pull tab helps the wearer put the gloves on quickly.

Alpinestars ZX EVO V3 Nomex Balaclava White front view

Alpinestars Alpinestars ZX EVO v3 Nomex Balaclava $109.95

Alpinestars ZX EVO V3 Nomex Balaclava The Alpinestars ZX EVO V3 Balaclava is engineered for Formula 1-level performance and driver comfort. Constructed with LENZING FR, a sustainably produced viscose fiber offering exceptional flame resistance and heat protection, this ultra-lightweight, soft, and breathable balaclava helps keep drivers cool, dry, and protected under extreme conditions. Lightweight comfort with Formula 1-spec flame protection Alpinestars ZX EVO V3 Nomex Balaclava Key Features F1-specification balaclava featuring Alpinestars’ advanced flame-resistant technology. LENZING FR natural fiber provides permanent thermal insulation and heat protection to reduce heat stress. Soft, stretchable open-knit construction at the mouth and back enhances airflow and breathability. Double-layer face zone for added protection where it matters most. Mouth opening allows easy access for hydration systems during long stints. Flat seams minimize pressure points for a more comfortable fit inside tight-fitting helmets. Lightweight, seamless design ensures optimal fit and long-term driver comfort. Moisture-wicking fibers draw perspiration away from the skin to keep the driver cool and focused. Weight: 205 g/sqm. Alpinestars ZX EVO V3 Nomex Balaclava Construction Designed to Formula 1 standards using Alpinestars’ proprietary flame-resistant fabric technology. LENZING FR fabric delivers permanent fire resistance combined with superior thermal insulation. Engineered for softness and flexibility to enhance driver comfort under high-performance conditions. Open-knit mouth and back panels maximize ventilation to reduce heat buildup inside the helmet. Dual-layer reinforced front section increases protection in critical zones without adding bulk. Alpinestars ZX EVO V3 Nomex Balaclava Protection Certified to FIA 8856-2018 and SFI 3.3 homologation standards. Alpinestars ZX EVO V3 Nomex Balaclava FAQs: Is the ZX EVO V3 balaclava approved for all major racing series? Yes, it meets FIA 8856-2018 and SFI 3.3 requirements, making it legal for use in virtually all sanctioned motorsport events. What is LENZING FR and why is it used? LENZING FR is a naturally derived fiber designed for permanent flame resistance, offering excellent thermal insulation and comfort under fire-retardant conditions. How does the ZX EVO V3 differ from older Alpinestars balaclavas? It uses a lighter, more breathable knit and a seamless design for superior comfort, heat management, and moisture control. Can I use this balaclava with a hydration system? Yes, the mouth opening is specifically designed for easy access to hydration tubing during races. Upgrade your racing gear with the Alpinestars ZX EVO V3 Nomex Balaclava—designed for peak performance, superior comfort, and certified protection at the highest level of motorsport.

Alpinestars Alpinestars SP+ Racing Shoes $289.95

Alpinestars SP+ Racing Shoes The Alpinestars SP+ Racing Shoes deliver high-end motorsport performance at a more approachable price. Built with F1-inspired technology, a hybrid suede and full-grain leather upper, and a thin water-repelling rubber outsole, the SP+ gives serious racers and committed track-day drivers excellent pedal feel, comfort, and FIA-approved protection. Certified to the FIA 8856-2018 homologation standard, the Alpinestars SP+ combines heat-resistant materials, secure dual closure, breathable perforation zones, and cushioned ankle support for confident control during racing, HPDE, endurance events, and long days at the track. Alpinestars SP+ Racing Shoe Features Certified to the FIA 8856-2018 homologation standard. Hybrid upper combines soft suede and full-grain bovine leather. F1-inspired thin rubber outsole provides refined pedal feedback. Water-repelling outsole offers grip and control in demanding conditions. Dual-closure system with adjustable hook-and-loop strap and traditional laces. Hidden loop anchors help create a secure, customizable fit. Cushioned knit Achilles zone improves rear-foot flexibility and comfort. Strategic perforations on lateral and medial sides improve airflow. Ventilated tongue helps reduce heat buildup. Para-aramidic tubular lining provides excellent heat resistance. Nitrile rubber padding in the collar and tongue adds comfort without excess weight. F1-Inspired Pedal Feel The Alpinestars SP+ Racing Shoes use a thin rubber outsole derived from Formula 1 applications to help maximize pedal sensitivity. This gives drivers a more connected feel through the brake, throttle, and clutch while still providing dependable grip and comfort. Suede and Full-Grain Leather Upper The SP+ uses a hybrid upper design that blends soft suede with durable full-grain bovine leather. This combination gives the shoe a premium feel while maintaining the durability, flexibility, and response needed for motorsport use. Secure Dual Closure System An adjustable hook-and-loop strap works with traditional laces and hidden loop anchors to create a locked-in fit. The closure system helps reduce unwanted foot movement during heavy braking, quick transitions, and long track sessions. Comfort for Long Sessions The cushioned knit Achilles zone improves flexibility around the rear of the foot, while nitrile rubber padding in the collar and tongue adds comfort without unnecessary bulk. Strategic perforations and a ventilated tongue help increase airflow and reduce heat buildup inside the shoe. Heat-Resistant FIA Protection The para-aramidic tubular lining provides excellent heat resistance while keeping the shoe lightweight and comfortable. FIA 8856-2018 certification makes the Alpinestars SP+ suitable for sanctioned motorsport use where FIA-approved footwear is required. Alpinestars SP+ Racing Shoe Specifications Approval: FIA 8856-2018 Upper Material: Suede and full-grain bovine leather Lining: Para-aramidic tubular lining Closure: Hook-and-loop strap with traditional laces and hidden loop anchors Outsole: Thin F1-inspired water-repelling rubber outsole Ventilation: Perforated side zones and ventilated tongue Comfort: Cushioned knit Achilles zone with nitrile rubber collar and tongue padding Use: Road racing, club racing, endurance racing, HPDE, track days, and competition driving Alpinestars SP+ Racing Shoe Sizing Chart Alpinestars SP+ Racing Shoes FAQs Are the Alpinestars SP+ Racing Shoes FIA approved?Yes. The Alpinestars SP+ Racing Shoes are certified to the FIA 8856-2018 standard for fire-resistant motorsport protection. How does the SP+ compare to more expensive Alpinestars racing shoes?The SP+ uses many F1-inspired comfort and outsole technologies found in higher-end Alpinestars models, but with a more approachable suede and leather construction. Are these shoes good for track days?Yes. The thin F1-style sole provides excellent pedal feel, and the cushioned Achilles area helps keep the shoe comfortable through long HPDE and track-day sessions. Do the Alpinestars SP+ Racing Shoes run true to size?Most drivers find the SP+ runs true to size. Drivers with wider feet may want to size up for the best comfort. Do these shoes provide good pedal feel?Yes. The thin water-repelling rubber outsole is designed to deliver refined pedal feedback and strong grip. What materials are used in the SP+ Racing Shoes?The SP+ uses a hybrid suede and full-grain bovine leather upper with a para-aramidic tubular lining for heat resistance.

Stilo S.r.l. Stilo Hydration Bite Kit for Stilo ST5 & ST6 Helmets $14.95

Stilo Helmet Hydration Kit for ST5 and ST6 Hydration Bite-Valve Kit Designed Specifically for Stilo Stilo Helmet Hydration Bite Kit Includes: (1) Bite valve (YA0601)

Stilo Hydration Male Connector YA0603 Image

Stilo S.r.l. Stilo Hydration Male Connector for Stilo ST5 & ST6 GT Helmets $14.96

Stilo Helmet Hydration Kit Male Connector Fits Stilo ST5 or ST6 GT Helmets Hydration Kit male connector designed specifically for Stilo ST5 and ST6 GT racing helmets. Kit Includes: (1) Male Connector (YA0603)

Stilo S.r.l. Stilo ST6 Helmet Owner's Kit $124.95

Stilo ST6 Helmet Owner's Kit The Perfect Accessories For Your Stilo ST6 Helmet This kit has everything you need to get the most out of your Stilo ST6 helmet, including a premium Stilo Race Gear Bag to keep your helmet, HANS device, and other racing accessories safe and secure. Add in Molecule Refresher racing garment care and you'll ensure your helmet (and the rest of your gear) stays clean, fresh, and lasts for years. What Makes Up the Stilo ST6 Helmet Owner's Kit? Stilo YY0070 Race Gear Bag fits your Stilo ST6 helmet, head-and-neck restraint, and essential track accessories. Molecule Refresher 16 oz. spray gets the funk out and keeps your helmet (and the rest of your gear) looking & smelling fresh.

stilo_ya08102_dk_yellow helmet visor for Stilo ST5

Stilo S.r.l. Stilo ST5 Helmet Visors (For Anti-Ballistic ABP Helmets Only) from $169.95

Stilo ST5 Helmet Visors (For Anti-Ballistic ABP Helmets Only) Colorful Anti-Fog/Anti-Scratch Shields for Your Stilo ST5 These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 FN Carbon Fiber ABP helmet only A Note on Cleaning Anti-Fog/Anti-Scratch Shield Anti-scratch/anti-fog shields require special care in order to preserve the coatings on the inside of the shield. Only use Acrysol Shield Cleaner to clean your shield, inside and out. Do not use glass cleaner containing ammonia (like Windex) as this can harm both the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. In a pinch, you're better off using water and a clean microfiber cloth to gently clean your Stilo shield.

Yellow Sabelt TG-3 Mechanic Gloves with black palm, FIA certification patch, and wrist strap.

Sabelt S.p.A. Sabelt LASER TG-3 Mechanic Gloves FIA 8856-2018 $99.66

Sabelt LASER TG-3 Mechanic Gloves FIA 8856-2018 Certified The Sabelt LASER TG-3 mechanic gloves were engineered specifically for professional pit crews working in high-pressure racing environments. Designed for tire changers and pit lane mechanics, these FIA 8856-2018 certified flame-retardant gloves provide outstanding protection, grip, and durability while handling wheels, tools, and wheel guns during rapid pit stops. Built for Professional Pit Crew Performance During a pit stop, every second matters. The LASER TG-3 gloves are built with thin leather reinforcement patches on the palm and fingertips, delivering a durable, high-traction grip when handling tires, tools, and equipment. Whether you're grabbing a hot wheel rim or controlling a powerful wheel gun, these gloves provide the control and reliability needed for professional motorsport pit operations. Strategic padding covered with high-grip material is positioned between the thumb and index finger to absorb impact when operating pneumatic wheel guns. Additional protective padding on the back of the hand shields knuckles and the base of the thumb when grabbing wheel spokes or maneuvering heavy wheels during fast tire changes. A wide adjustable wrist strap wraps securely around the wrist to provide additional support and stability when lifting or handling wheels. This added reinforcement helps reduce strain during repetitive pit stop tasks. Although FIA 8856-2018 approved for flame resistance, the additional padding and protective features make the LASER TG-3 gloves specifically suited for mechanics and pit crew members rather than for driving. Sabelt LASER TG-3 Mechanic Gloves Features FIA 8856-2018 certified flame-retardant construction Designed specifically for professional pit crew mechanics Durable leather palm and fingertip reinforcements for maximum grip High-traction padded protection between thumb and index finger for wheel gun use Impact padding on knuckles and thumb for wheel handling protection Wide adjustable wrist strap for added support during lifting Ideal for tire changers and pit lane technicians Available in Signal Yellow or Black with black palms and padding Sabelt Sizing Chart How to Measure Your Glove Size To determine the correct glove size, measure around the widest part of your hand across the knuckles while making a fist. Do not include the thumb in the measurement. Sabelt LASER TG-3 Mechanic Gloves FAQs Are the Sabelt LASER TG-3 gloves FIA approved?Yes. These gloves are FIA 8856-2018 certified, meaning they meet the latest FIA requirements for flame-resistant pit crew equipment. Can the LASER TG-3 gloves be used for driving?No. These gloves are designed for pit crew mechanics. The protective padding makes them too bulky for driving use. What tasks are these gloves designed for?They are specifically built for pit lane mechanics performing tire changes, operating wheel guns, and handling wheels during race pit stops. What colors are available?The Sabelt LASER TG-3 gloves are available in high-visibility Signal Yellow and standard Black, both featuring black palms, padding, and wrist straps. Do the gloves provide grip when handling wheels?Yes. The reinforced leather palm and fingertip patches provide excellent grip when handling tires, wheels, and tools in the pit lane. If you're part of a professional pit crew or race team, the Sabelt LASER TG-3 Mechanic Gloves deliver the protection, grip, and durability required to perform under the extreme pressure of race-day pit stops.

Sold out

Stilo S.r.l. Stilo ST6 Tear Off Kits from $34.95

Stilo ST6 Tear-Off Kits Protect your Stilo ST6 helmet visor shield1 from rocks, dirt, and debris with these visor tear-offs. These Stilo tear-offs are perfect for road racing or dirt track use where your visor is exposed to the elements. Choose from three different kits: Package with 5 individual tear-offs (YA0931) Three sets of 3 tear-offs stuck together, with perimeter seal (YA0930-CP) Three sets of 10 tear-offs stuck together, with perimeter seal (YA0929-CP) Now you can greatly extend the life of your Stilo ST6 shield by drastically reducing pitting and scratches. Stilo ST6 Tear-Off Kit Details Manufacturer: Stilo Tint: Clear Fits all Stilo ST6 helmet visors 1 Note: Stilo ST6 visor shield sold separately.

Racing Optics, Inc. Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack for Stilo ST6 $39.95

Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear) for Stilo ST6 The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. 10265C Fits: Stilo ST6

Bell KC7 CMR Pro Lewis Hamilton 2026 karting helmet front right angle with tinted visor and race-inspired graphics-image

Bell Racing Helmets Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet | Snell-FIA CMR-2016 $1,059.95

Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet The Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet brings Formula 1-inspired design to serious youth karting. Created with Lewis Hamilton and Bell’s paint team, this special edition features a bold yellow and red design based on his own 2026 F1 helmet. Lightweight, highly ventilated, and packed with premium accessories, it is built for young drivers who want safety, comfort, and standout style on track. Lewis Hamilton Style Built on Bell KC7-CMR Based on Bell’s proven KC7-CMR platform, this helmet combines a hand-laminated carbon, Kevlar, and fiberglass shell with advanced airflow and youth karting certification. The ultra-lightweight design helps reduce fatigue for developing drivers, while the included aero and visor upgrades give this special edition a true race-ready package right out of the box. KC7-CMR Pro Lewis Hamilton 2026 Key Features Lewis Hamilton signature 2026 design with yellow and red graphics inspired by his Formula 1 helmet. Includes premium accessory package with 2mm multi-layer red clear visor, top and side air intakes, rear spoiler, and Bell helmet bag. Ultra-lightweight construction helps reduce neck fatigue during long karting sessions. Advanced ventilation system with 14 intake and exhaust channels helps keep the driver cool and focused. 2mm double-screen anti-fog visor provides clear visibility in changing conditions. Aerodynamic shell shape improves airflow, visor positioning, and stability at speed. Hand-laminated carbon, Kevlar, and fiberglass shell delivers strength while keeping overall weight low. Snell-FIA CMR-2016 approved for youth karting competition use. Helmet Weight Sizes 54–56 cm: 1185g, plus or minus 3% Sizes 57–59 cm: 1230g, plus or minus 3% KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet FAQs Is the Bell KC7-CMR Pro Lewis Hamilton 2026 helmet approved for kart racing? Yes, it is Snell-FIA CMR-2016 approved for youth karting competition. Who is the Bell KC7-CMR Pro Lewis Hamilton helmet made for? It is designed for karting drivers under 18 who need a lightweight helmet built to youth karting standards. What accessories are included with this Lewis Hamilton edition? It includes a 2mm multi-layer red clear visor, top and side air intakes, rear spoiler, and Bell helmet bag. Is the visor anti-fog? Yes, the helmet includes a 2mm double-screen anti-fog visor designed to help maintain clear vision in wet or humid conditions. What makes this helmet different from the standard KC7-CMR? This version features the Lewis Hamilton 2026 design and comes with premium accessories already included. The Bell KC7-CMR Pro Lewis Hamilton 2026 Karting Helmet gives young racers a serious mix of Formula 1-inspired style, lightweight protection, and included race-ready upgrades. For drivers chasing confidence and performance on track, this helmet is ready for the next session. Bell KC7-CMR Pro Lewis Hamilton Sizing Chart

32 33 34 35 36

OUR ADDRESSES

West Des Moines, Iowa
119 19th St.
Suite #101
West Des Moines, IA 50265

Waukee, Iowa (Opening Summer 2026)
1675 NW Gettysburg Lane
Waukee, IA 50263

sales@competitionmotorsport.com

(844) 438-7244

OPERATING HOURS:
Mon-Fri 9am - 5pm (Central time)

IMPORTANT INFO About Us Contact Us Become a Dealer Blog Terms & Conditions Returns & Exchanges Shipping Policy Shipping Protection Legal Notice Your Privacy Choices

CLUB MEMBER INFO Club Members Contact Us BMW CCA Ferrari Club of America GRIDLIFE NASA Porsche Club of America SCCA SVRA

Find anything you need

Driver Gear

If you wear it to protect yourself while racing, you'll find it in the Competition Motorsport Driver Gear collection.