Data Loggers & Video

AiM SmartyCam HD Suction Mount This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your windshield or any other smooth, flat surface. Allows you to quickly mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and the 3 1/2" diameter, lever-actuated suction cup base mounts incredibly securely. KIT INCLUDES: Suction cup Clamp base with ball (screws provided) 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged washer

AiM Sports SmartyCam HD Roll Bar Mount Kit This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your roll bar or harness bar. Allows you to quickly, securely mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and cast aluminum base mounts incredibly securely. KIT INCLUDES: Cast aluminum lower mount Jubilee clamp 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged washer

AiM SmartyCam GP Suction Mount This adjustable mount holds your AiM SmartyCam GP bullet camera securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). Included in the AiM SmartyCam Suction Mount: Suction cup base Lower ball clamp 60mm (2.4 inch) clamp arm Top ball with 1/4-20 mounting stud Machined collar

AiM Sports SmartyCam GP Roll Bar Mount This strong, adjustable mount holds your AiM SmartyCam GP HD bullet camera securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment, keeping it pointed in the right direction during races and track days. The cast aluminum base and stainless steel clamp create a solid base for this heavy-duty mount. Included in the AiM SmartyCam Roll Bar Mount: Cast aluminum lower mount Jubilee clamp 60mm (2.4 inch) single clamp arm Ball head with 1/4-20 threaded stud Ridged lock washer

AiM Sports SmartyCam GP Base Mount Kit The Best Mount for Your SmartyCam Bullet Camera This strong, adjustable mount holds your AiM Sports SmartyCam GP HD base unit securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment while keeping it safe and secure during races and track days while the V-shaped base and two different size hose clamps fit a wide range of tubing sizes, from 1" to 2" OD. The rectangular base adapter provides a stable, bolt-on base for secure mounting of the SmartyCam GP base. The wide range of adjustment lets you aim the viewing screen in just about any direction. Includes V-base with ball, double clamp arm, top ball with 2-bolt diamond mounting flange, rectangular mount base adapter, 2 hose clamps, and rubber isolator strap.

AiM Patch Cables With 3.5mm Microphone Input The original AiM SmartyCam (2009-2013) and new SmartyCam HD V 2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has a 3.5mm mono jack for an external microphone. The input from this jack automatically mixes with the sound from the SmartyCam internal microphone. SmartyCam Microphone Cable Fitment Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD "Rev 2" or later (2015+) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD GP "Rev 2.1" or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge AiM SmartyCam CAN Cable with Microphone Jack, 4M Details: Manufacturer: AiM Manufacturer part number: V02566300 Alternate part number: MC-552 Dash, Solo DL, Solo 2 DL End: 5 Pin Male 712 SmartyCam End: 7 Pin Male 712 Microphone jack: 3.5mm female mono Cable length: 4M (13 feet) Length from 7 pin 712 to "Y" Adapter: 50mm Length from Y adapter to 5 pin 712" 4 Meter Length from Y adapter to microphone 3.5mm female jack: 900mm The 7-pin 712-type connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures 4M (13 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the SmartyCam HD, which has a 5-pin plug.  

AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Moving your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs.  The AiM V02569050 harness connects your Solo 2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo 2 DL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground). Does not fit original AiM Solo DL. AiM Solo2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Details: Manufacturer: AiM Manufacturer part number: V02589050 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: No Pins on AiM Solo DL Side: 7 Pin Thread on connector Vehicle Chassis Ends: 6 Non terminated wires Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+ AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Wiring Codes: Red: 9-15VDC Black: Ground Grey: CAN+ Blue: CAN- Black: ECU RS232 RX Blue: ECU RS232TX Both blue wires are the same color, but each wire has an identifier tag stating the connection type

AiM Solo 2 & Solo 2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo 2 and Solo 2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo 2 to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has 2 non-terminated wires (Power and Ground). AiM Solo 2 & Solo 2 DL Vehicle Power Wiring Harness Details: Manufacturer: Aim Manufacturer part number: V02589020 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: Yes Pins on AiM Solo Side: 5 Pin Thread on connector Vehicle Chassis Ends: 2 Non terminated wires Vehicle Chassis Ends Break Out: Power, and Ground If you are putting a Solo2 into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install.   

AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL AiM Solo 2 DL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo 2 DL. OBD-II is also known as K-Line This is the same cable supplied with the original AiM Solo 2 DL for OBD-II. Does not fit the original Solo DL.  AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL Details: Manufacturer: AiM Manufacturer part number: V02589040 End 1: AiM 7 Pin 712 (thread on) End 2: OBD-2 (K-Line) Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo 2: No Fits AiM Solo 2 DL: Yes

AiM Sports Solo 2 Direct Power Cable Not getting enough current through your OBDII connection? Add this direct power cable and never worry about charging before an event again.

Stilo to Garmin Adapter Cable This cable can be used to connect your Garmin Catalyst Driver Performance Optimizer to your Stilo helmet. Includes 3.5mm connector on one end and Stilo male IMSA connector on the other. Made in the USA from thin ROHS-compliant cable.

AiM Sports SmartyCam External Power Cable NOTE: Cables typically take 3 to 5 business days to ship. If you're not powering your AiM SmartyCam by connecting it to a Solo2 DL or an AiM Sports Dash, you'll need this external power cable in order to provide enough juice for your SmartyCam to record every session. Installation is quick and easy. Two meters (6.5 feet) in length.

Thermocouple extension cable with 712 3-pin male end to K-style female end. 5.00 ft. cable length.

AiM Sports SmartyCam to Solo/Dash Cable NOTE: Cables typically take 3 to 5 business days to ship. Have more than one vehicle with a dash or Solo 2 DL? Want to make swapping your SmartyCam between vehicles easier? Grab this extra 4M cable for your second car, route the cable as needed and leave it in place to power your SmartyCam when you drive that car. This cable takes the headache out of the process for people with more than one vehicle but only one SmartyCam. Four meters (13 feet) in length.