Racing Brake Pads

PFC Brake Pads 7740.08.16.44 Fits the Following Vehicle: Make Model Years Front Rear Radical SR1 2012 -     X    X PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range.

PFC 7754.11.16.44 Brake Pads Fits the Following Calipers: Caliper Manufacturer: Caliper Model: AP Racing SC100 Mark Williams 81100 82100 Outlaw 2800 Bridge Wilwood Dynalite w/ Bridgebolt NDL w/ Bridgebolt One of PFC's newest offerings, Performance Friction 7754.11.16.44 racing brake pad set fits many popular AP Racing and Wilwood bridge-bolt calipers. Brake Pads Details: Manufacturer: Performance Friction Manufacturer part number: 7754.11.16.44 Compound: 11 Street or Race: Race Thickness of backing plate and pad material: 16mm Quantity in box: 4 pads PFC 11 Compound Details: 11 Compound is a new generation sprint and medium distance friction —the ultimate in control, with superior disc conditioning. 11 compounds were developed from the 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Brake with confidence—brake with ultimate control and modulation. For many applications, 11 will replace the venerable 01 compound. The PFC 11 compound’s wear is par with PFC’s legendary 01 compound. Virtually zero taper wear when raced in a properly designed race caliper.

PFC Brake Pads 7838.08.17.44 Fits the Following Cars: Make Model Build (Years) Front Rear McLaren 650S  2014 - 17 X   McLaren 675LT  2015 - 17 X   McLaren MP4-12C  2011 - 14 X   PFC 08 Compound This is one of PFC's most popular compounds, coming to fame in Endurance sports car and GT racing due to its exceptional performance when smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds. PFC08 can easily match the wear characteristics of competitors' friction materials, but with much higher bite and more consistent performance across a broad temperature range.

Porsche 718 Cayman GT4 RS PCCB to Steel Brake Conversion Kit Convert your Porsche 718 Cayman GT4 RS from expensive PCCB carbon ceramic brakes to track-proven Girodisc steel rotors paired with race-winning Pagid brake pads. This complete, all-in-one package eliminates the risk of damaging your factory PCCB system while delivering consistent, high-performance braking for track days, HPDE, and racing. Protect your investment by preserving your Porsche Carbon Ceramic Brakes for street use or resale value. With replacement PCCB rotors costing upwards of $20,000, this conversion kit is the smart solution for serious drivers who demand repeatable braking performance under extreme conditions. Complete, No-Guesswork Conversion This curated kit includes everything required to replace your OEM PCCB setup with high-performance Girodisc iron rotors and Pagid racing brake pads. Each component is selected for optimal thermal capacity, durability, and consistent pedal feel on the GT4 RS platform. Kit Includes Girodisc A1-154 Front Rotors Girodisc A2-154 Rear Rotors Pagid 4924 Front Brake Pads Pagid 4925 Rear Brake Pads Why Convert from PCCB to Steel? Protect costly PCCB rotors from track wear and damage Reduce operating costs for frequent track use Gain access to proven Pagid racing pad compounds Improve consistency and serviceability under high heat Quickly swap back to PCCB for resale or street driving Each component in this kit is engineered for direct fitment and maximum performance on the Porsche GT4 RS. Click individual product links above for detailed specifications and available Pagid compound options. Pagid Racing Brake compounds for steel (cast iron) rotors RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Porsche 992 GT3 & GT3 RS PCCB to Steel Brake Conversion Kit Convert your Porsche 992 GT3 or GT3 RS from costly PCCB carbon ceramic brakes to track-proven Girodisc steel rotors paired with race-winning Pagid brake pads. This complete, all-in-one package is engineered for serious track use—delivering consistent braking performance while eliminating the risk of damaging your factory PCCB system. Preserve your Porsche Carbon Ceramic Brakes for street driving or resale value. With replacement PCCB rotors costing well into five figures, this conversion kit is the smart choice for drivers who regularly push their 992 GT3 or GT3 RS at the limit. Complete, No-Guesswork Conversion This curated package includes everything required to replace your OEM PCCB setup with high-performance Girodisc iron rotors and Pagid racing brake pads. Each component is selected for optimal fitment, heat management, and durability under extreme braking loads. Kit Includes Girodisc A1-276 Front Rotors Girodisc A2-154 Rear Rotors Pagid 4924 Front Brake Pads Pagid 4925 Rear Brake Pads Why Convert from PCCB to Steel? Protect expensive PCCB rotors from track wear and failure Significantly reduce long-term operating costs Access proven Pagid racing pad compounds (RS, RSL, endurance options) Improve consistency, modulation, and serviceability under high heat Quickly revert to PCCB for resale or street use Applications Porsche 992 GT3 (2022+) Porsche 992 GT3 RS (2023+) Each component in this kit is engineered for direct fitment and maximum braking performance on the Porsche 992 GT3 platform. Click individual product links above for detailed specifications and available Pagid compound options. Pagid Racing Brake compounds for steel (cast iron) rotors RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Race Technologies Front Brake Pad 2403.17 Fits the Following Cars: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X RE10 Compound Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Race Technologies Rear Brake Pad - 2425.16 Fitment Guide For Race Technologies 2425 Brake Pad Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X RE10 Compound Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Race Technologies Front Brake Pad - 2450.18 Race Technologies 2450 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 GT3 [iron brakes] 14 - 16 X Porsche 991 GT3 RS [iron brakes] 16  X Porsche 991 Turbo [iron brakes] 13 - 19 X Porsche 991 Turbo S [iron brakes] 13 - 19 X Porsche 991.2 GT3 [iron brakes] 18 - 19 X Porsche 991.2 GT3 RS [iron brakes] 19 X Porsche 991 911 Speedster [iron brakes] 19 X Porsche 992 3.0 Carrera S [iron brakes] 20 - X Porsche 992 3.0 Carrera 4S [iron brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [cast iron brakes] 19 - X Porsche Cayman GT4 [981] 16 -20 X Porsche 718 Cayman GTS 4.0 [982] [cast iron brakes] 2016 X Porsche 992 Turbo [iron brakes] 20 - X Porsche 992 GT3 / GT3RS [iron brakes] 22 -  X Porsche 718 Cayman GT4 4.0 RS [982] [cast iron brakes] 23 - 25 X   Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. RACE TECHNOLOGIES RE10 COMPOUND Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. RACE TECHNOLOGIES TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust.Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Race Technologies Rear Brake Pad - 2451.18 RACE TECHNOLOGIES 2451.18 FITMENT Make Model Build (Year) Front Rear Porsche 918 Spyder 15 - X Porsche 991 GT3 [iron brakes] 14 - 18 X Porsche 991 GT3 RS [iron brakes] 16 -  X Porsche 991 Turbo [iron brakes] 13 - 19 X Porsche 991 Turbo S [iron brakes] 13 - 19 X Porsche 991.2 GT3 [iron brakes] 18 - X Porsche 991.2 GT3 RS [iron brakes] 19 - X Porsche 991 911 Speedster [iron brakes] 19 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche Cayman GT4 [981] 16 - 20 X Porsche 992 Turbo [iron brakes] 20 - X Porsche 992 GT3 [iron brakes] 22 - X Porsche 718 Cayman GT4 4.0 RS [982] [iron brakes] 21 - X   Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. RACE TECHNOLOGIES RE10 COMPOUND Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. RACE TECHNOLOGIES TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust.Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Race Technologies Front Brake Pad - 2426.17 Fitment guide Race Technologies 2426.17 Brake Pad Make Model Build (Year) Front Rear Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 19 X Porsche Boxster Spyder [981] 15 - 20 X RE10 COMPOUND Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust.Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

FITS: Porsche 911 Carrera 4S Iron Brake 993 1996 1998 Front 911 Carrera RS Iron Brake 993 1995 1996 Front 911 Turbo Iron Brake 993 1996 1998 Front 911 Turbo S Iron Brake 993 1998 1998 Front RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms TS20:The TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum. TS20 are offered for a select range of OEM Brembo caliper shapes. *Denotes a "race only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in. Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.

Race Technologies 2416.18.RE10 Racing Brake Pads for BMW M FITMENT BMW F87 M2 (2016-2020) Front iron rotors (not for CS or Competition) BMW F8x M3 (2015-2020) Front iron rotors BMW F8x M4 (2015-2020) Front iron rotors RE10 COMPOUND RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. RACING PAD NOTES Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables "RE10" denotes a "racing use only" pad compound.

Race Technologies Rear Brake Pad - 2427.18 Fitment Guide for Race Technologies 2427.18 Brake Pads Make Model Build (Year) Front Rear Alpina B5 F1 X 2015 - X Alpina B6 Biturbo [F12/F13] 2012 - X BMW M5 [F10] 2011 - 16 X BMW M5 [F10] [ceramic brakes] 2011 - 16 X BMW M6 [F13] 2012 - 18 X BMW M6 [F13] [ceramic brakes] 2012 - X BMW M3 [G80] 2021- X BMW M4 [G82] 2021- X BMW M2 [G87] 2022 - X RE10 Compound Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Race Technologies 2434.17.RE10 Racing Brake Pads for BMW M BMW F87 M2 (2016-2020) Rear iron rotors (not for CS or Competition) BMW F8x M3 (2015-2020) Rear iron rotors BMW F8x M4 (2015-2020) Rear iron rotors RE10 COMPOUND RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. RACING PAD NOTES: Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables. Note: "RE" denotes a "racing use only" pad compound.

Race Technologies 2448.20.RE10 Racing Brake Pads for BMW M These Pads Fit the Following Cars: BMW F87 M2 CS (2016-2020), front iron rotors BMW F87 M2 Competition (2016-2020), front iron rotors RE10 Compound RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. Racing Brake Pad Notes Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables Note: "RE" denotes a "racing use only" pad compound.

Race Technologies 3442.17.RE10 Racing Brake Pads RE10 Compound RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. Key Specifications Axle Set: 4 pieces Caliper Compatibility: 6-Piston (N and J Caliper) Thickness: 18mm Wide Annulus Design Racing Brake Pad Notes: Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables. Note: "RE" denotes a "racing use only" pad compound.