All

GiroDisc 4003.16 Brake Pads for McLaren Iron Conversion Front Choose the Brake Pad Compound That Matches Your Setup This consolidated listing groups the shared 4003.16 brake pad shape into one product page with compound options available as variants. Select the pad compound that best matches your street, track, sprint, or endurance braking needs. Brake Pad Application McLaren Iron Conversion Front Available Compound Variants GP40 Sprint — SKU GP40-4003.16 GP30 Endurance — SKU GP30-4003.16 GP10 Street — SKU GP10-4003.16 Important Fitment Note Confirm the exact compound, SKU, caliper, axle position, and brake pad application before ordering. Some variants share the same pad-shape code but may have application notes that differ slightly by compound. GiroDisc 4003.16 Brake Pads for McLaren Iron Conversion Front FAQs Why are multiple SKUs combined on this listing?These options share the same GiroDisc brake pad shape code, so they are grouped together with the pad compound selected as the variant. How do I choose the correct variant?Select the compound that matches your use case, then confirm the exact SKU and application text before checkout. Are GP10, GP30, GP35, GP40, and other compounds the same pad?No. They may share the same pad shape, but the compounds are designed for different street, track, sprint, or endurance uses. Should I verify fitment before ordering?Yes. Always verify the caliper, rotor conversion, axle position, and pad-shape requirement for your specific setup. Choose the compound that fits your driving goals while keeping all matching pad-shape options in one easy-to-shop listing.

GP10-4001.16 GiroDisc GP10 Street Pads for Ferrari Iron Conversion Front Street-Friendly Bite with Track-Day Confidence GiroDisc GP10 semi-metallic street pads are designed for performance-minded drivers who want confident stopping power without giving up everyday drivability. The GP10 compound is tuned for lower dust, quieter operation, and occasional track use when the pace picks up. The GP10-4001.16 listing is configured for Ferrari Iron Conversion Front. Use the SKU, axle position, caliper reference, and application wording together when confirming the correct brake pad option for your vehicle or brake setup. Brake Pad Application GP10 Street Pads for Ferrari Iron Conversion Front GP10 Brake Pad Features Semi-metallic street performance pad compound Designed for lower dust and quieter street manners Confident pedal response for spirited driving A strong option for drivers balancing road use with occasional performance driving Fitment Notes Brake pad fitment can depend on the caliper, conversion kit, rotor package, or exact pad-shape requirement. Review the application wording carefully and confirm compatibility before ordering, especially for race compounds and iron-conversion applications. GP10-4001.16 GiroDisc GP10 Street Pads for Ferrari Iron Conversion Front FAQs What type of driving is the GP10 compound made for?GP10 pads are designed for performance street use with occasional track-day capability, making them a practical choice for drivers who want more confidence than a typical commuter-oriented pad. Is GP10-4001.16 the correct pad listing for Ferrari Iron Conversion Front?This listing is specifically labeled for Ferrari Iron Conversion Front. Confirm the vehicle, caliper, rotor conversion, or pad-shape requirement before ordering. Why does this brake pad listing use the SKU GP10-4001.16?The SKU identifies the exact GiroDisc or Raybestos pad application listed here, which helps match the correct compound and shape to the braking setup. Should I confirm fitment before purchase?Yes. Brake pad selection can vary by caliper, rotor conversion, pad shape, and axle position, so verify the application details against your setup before ordering. Choose the brake pad compound and application that best matches your car, braking system, and intended use.

GP10-4003.16 GiroDisc GP10 Street Pads for McLaren Iron Conversion Front Street-Friendly Bite with Track-Day Confidence GiroDisc GP10 semi-metallic street pads are designed for performance-minded drivers who want confident stopping power without giving up everyday drivability. The GP10 compound is tuned for lower dust, quieter operation, and occasional track use when the pace picks up. The GP10-4003.16 listing is configured for McLaren Iron Conversion Front. Use the SKU, axle position, caliper reference, and application wording together when confirming the correct brake pad option for your vehicle or brake setup. Brake Pad Application GP10 Street Pads for McLaren Iron Conversion Front GP10 Brake Pad Features Semi-metallic street performance pad compound Designed for lower dust and quieter street manners Confident pedal response for spirited driving A strong option for drivers balancing road use with occasional performance driving Fitment Notes Brake pad fitment can depend on the caliper, conversion kit, rotor package, or exact pad-shape requirement. Review the application wording carefully and confirm compatibility before ordering, especially for race compounds and iron-conversion applications. GP10-4003.16 GiroDisc GP10 Street Pads for McLaren Iron Conversion Front FAQs What type of driving is the GP10 compound made for?GP10 pads are designed for performance street use with occasional track-day capability, making them a practical choice for drivers who want more confidence than a typical commuter-oriented pad. Is GP10-4003.16 the correct pad listing for McLaren Iron Conversion Front?This listing is specifically labeled for McLaren Iron Conversion Front. Confirm the vehicle, caliper, rotor conversion, or pad-shape requirement before ordering. Why does this brake pad listing use the SKU GP10-4003.16?The SKU identifies the exact GiroDisc or Raybestos pad application listed here, which helps match the correct compound and shape to the braking setup. Should I confirm fitment before purchase?Yes. Brake pad selection can vary by caliper, rotor conversion, pad shape, and axle position, so verify the application details against your setup before ordering. Choose the brake pad compound and application that best matches your car, braking system, and intended use.

Cobalt Brake Pads Porsche D1389 Racing Brake Pads (Rear) - 18mm Cobalt D1389 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Cobalt Brake Pads Porsche RC11 Racing Brake Pads (Front) Cobalt RC11 Fits The Following Vehicles: Porsche 997 GT3 Cup Car  (2006-2012) Porsche 996 GT3 Cup Car (2000-2005) Porsche 997 Turbo (2007-2012 Porsche 997 GT3/GT3RS/GT2/GT2RS (2007-2012) Porsche Carrera GT Front and Rear Pads Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Cobalt Brake Pads Porsche D1740 Racing Brake Pads (Rear) - 18mm Cobalt D1740 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 918 Spyder 13 - 15 X Porsche 991 GT3 [ceramic brakes] 15 - 18 X Porsche 991 GT3 [iron brakes] 15 - 18 X Porsche 991 GT3 RS [ceramic brakes] 15 - 18 X Porsche 991 GT3 RS [iron brakes] 15 - 18 X Porsche 991 Turbo [ceramic brakes] 13 - X Porsche 991 Turbo [iron brakes] 13 - X Porsche 991 Turbo S [ceramic brakes] 13 - X Porsche 991 Turbo S [iron brakes] 13 - X Porsche 991.2 GT2 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 [ceramic brakes] 18 - X Porsche 991.2 GT3 [iron brakes] 18 - X Porsche 991.2 GT3 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 RS [iron brakes] 18 - X Porsche 991 R [ceramic brakes] 16 - X Porsche 991 911 Speedster [iron brakes] 19 - X Porsche 992 3.0 Carrera 4S [ceramic brakes] 18- X Porsche 718 Cayman GT4 4.0 [982] [cast iron brakes] 19 - X Porsche 718 Cayman GT4 4.0 [982] [ceramic brakes] 19 - X Porsche Cayman GT4 [981] 16 - X Porsche Cayman GT4 [981] [ceramic brakes] 16 - X Porsche 992 Turbo [iron brakes] 2020 - X Porsche 992 GT3 [iron brakes] 2021 - X Porsche 992 Carrera S [ceramic brakes] 2018 - X Porsche 992 GT3 [ceramic brakes] 2021 - X Porsche 992 Turbo [ceramic brakes] 20 - X Porsche 718 Cayman GT4 4.0 RS [982] [cast iron brakes] 21 - X Porsche 718 Cayman GT4 4.0 RS [982] [ceramic brakes] 21 - X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Sabelt HYPER TB-12 Racing Shoes Precision Meets Performance The ultimate race-ready shoe for drivers who demand more. Engineered in Italy, the Sabelt HYPER TB-12 delivers unrivaled grip, lightweight agility, and all-day comfort—so you can focus on nailing apexes instead of fighting foot fatigue. Built for serious racers and track-day drivers, the HYPER TB-12 is FIA 8856-2018 approved and packed with performance tech: a soft, perforated leather upper for breathability, an ultra thin high-grip sole for precision pedal feel, and an aramidic fire-resistant lining for added protection. Key Features FIA 8856-2018 Homologation — Track-legal protection that meets the latest safety standard. Soft, Perforated Leather Upper — Smooth, breathable comfort that keeps feet cool through long stints. Ultra Thin Grip Sole — Maximum pedal feedback and responsive modulation for throttle, brake, and clutch. Aramidic Fire-Resistant Lining — Built-in heat and flame resistance where it matters. Real Carbon-Fiber Removable Insole — Lightweight, supportive, and race-inspired. 3D Honeycomb Inner Lining — Sabelt ventilation tech to enhance airflow and comfort. Made in Italy — Handcrafted quality from a motorsport leader. Tech Specs Material: Soft, perforated leather upper Sole: Ultra thin, high-grip design for ultimate pedal feel Lining: Aramidic fire-resistant interior Insole: Removable real carbon-fiber insole Ventilation: 3D Honeycomb inner lining (Sabelt technology) Homologation: FIA 8856-2018 approved Fit: Ergonomic, snug, performance-focused profile Weight: Feather-light for reduced fatigue FAQs Are these shoes FIA approved? Yes. HYPER TB12 shoes meet the FIA 8856-2018 standard for competitive motorsport use. How do they fit? The TB12 has a snug, performance-driven fit. If you are between sizes or prefer a roomier feel, consider sizing up. Are they good for sim racing? Absolutely. The ultrathin sole provides excellent pedal feedback for both real-world and sim racing. Comfort for all-day wear? Yes. The perforated leather, 3D honeycomb lining, and lightweight design make them comfortable in the car and around the paddock. Own the Pedals, Own the Race The Sabelt HYPER TB-12 Racing Shoes are more than footwear—they’re a performance upgrade for your feet. When every fraction of a second counts, stay connected to your car with race-proven precision. Don’t settle for ordinary. Step into HYPER TB12 and feel the difference today.  

Ferodo FRP3144 Front Brake Pads Designed to handle the high-performance demands of modern sports cars, Ferodo Brake Pads deliver consistent, fade-free stopping power. Ferodo is an OEM supplier to the world's leading car manufacturers, and are used by many of the top names in motorsports. The Ferodo Racing pad range are produced in Mondovi, Italy and  include the most advanced braking materials available in the world. Ferodo Brake Pad Coefficient of Friction (Mu) Comparison Chart Ferodo Brake Pad Operating Temperature Comparison Chart Compatibility – Will They Fit Your Car?  The Ferodo FRP3144 Front Brake pad will fit the following applications: AP Racing CP9660/9661 calipers Ferodo Racing Brake Pads Comparison Guide Choosing the right Ferodo race pad depends entirely on how often you plan to track your car and what performance characteristics matter most to you. We're asked daily for a recommendation between Ferodo DS2500, DS1.11, and DS3.12 brake pads—and with good reason. These three compounds cover nearly every use case, from daily-driven sports cars to championship-winning racecars. All three of these compounds are classified as Ferodo racing brake pads, not street pads, and each excels in specific areas such as fade resistance, torque stability, rotor wear, cold bite, and pad longevity. Whether you're heading to your first HPDE event or racing wheel-to-wheel in GT endurance, this guide helps you identify which Ferodo compound best matches your needs. Ferodo Racing Brake Pad Comparison DS3.12 vs DS1.11 vs DS2500 Compound Key Strengths Best For Notes Ferodo DS3.12 - Flattest torque curve tested- High mu with less pedal pressure- Unfadeable at racing temps- Long-lasting and disc-friendly Club racing, time trials, HPDE, endurance racingGreat for high-horsepower, heavy cars with aero and slicks Designed for modern track demandsExceptional pedal consistencyQuickly becoming the new gold standard in race compounds Ferodo DS1.11 - Endurance-proven durability- Flat torque curve across wide temps- Easy on rotors- Fade-resistant and long-lasting Endurance racing, club racing, HPDEIdeal for drivers who want consistency and long wear life Slightly lower bite than DS3.12Excellent option for long stints and heavy use Ferodo DS2500 - Hybrid street/track performance- Good cold bite and manners- Moderate noise and dust- Flat torque curve during aggressive driving Dual-purpose driving, canyon runs, autocross, light track useExcellent for HPDE on street tires May wear quickly on heavy cars with race tiresOne of the best value pads for enthusiast drivers Ferodo Brake Pad Fade Resistance & Max Operating Temperature DS3.12: Unmatched fade resistance, withstanding 1600°F+ on dyno tests with zero fade. The top choice for pro-level racing and extreme track duty. DS1.11: Excellent fade resistance with a slightly lower max temp than DS3.12. Ideal for endurance racing and high-speed circuits. DS2500: Superior to any street/sport pad for fade, but not suited to heavy race use with slicks. Perfect for dual-purpose and HPDE cars on street tires. Ferodo Brake Pad Pad Life & Durability DS3.12: The most durable in the Ferodo lineup, offering ~15% more pad life than DS1.11. Built for endurance racing. DS1.11: Long-lasting with excellent disc friendliness when bedded properly. DS2500: Less durable in high-heat racing environments but adequate for light track use and daily driving. Ferodo Brake Pad Feel, Feedback & Torque Curve DS3.12: Very high mu (coefficient of friction), "grabby" feel, and ultra-consistent torque curve—loved by pros for its predictability. DS1.11: Moderate mu with a slightly declining torque curve under heat. Offers a more progressive feel, especially on street tires. DS2500: Lowest mu of the three. Feels more like a high-performance street pad with smoother torque, great for HPDE and mixed-use driving. Ferodo Brake Pad Manners (Cold Bite, Noise, Dust) DS2500: Best manners of the group. Low noise, moderate dust, and excellent cold bite—perfect for street-to-track use. DS3.12: Low cold bite but quiet when bedded properly. Moderate dust, easy to clean. DS1.11: Noisy when cold, less suitable for street use. Moderate cold performance with reduced disc wear vs. DS3.12. Ferodo Brake Pad Price vs. Value DS3.12: Premium price, but long life and consistency reduce overall cost per mile. DS1.11: Slightly lower cost than DS3.12 with similar longevity. A great value for endurance racers. DS2500: Incredible value as a true dual-purpose pad that rivals many OEM replacements in price while offering track-capable performance. Ferodo Brake Pad Product Highlights Track-proven compounds: DS2500, DS1.11, and DS3.12 trusted by drivers from HPDE to GT racing Fade-resistant up to 1600°F+ with zero performance loss (DS3.12) Endurance-grade wear life with low disc wear and consistent performance Excellent pedal feel and torque modulation across a wide temperature range Made for serious motorsports—from weekend warriors to pro race teams Ferodo Brake Pad Frequently Asked Questions (FAQ) 1. Can I daily drive on Ferodo DS2500 brake pads? Yes. The DS2500 offers excellent manners on the street and solid performance on the track, making it a top choice for dual-purpose applications. 2. Is DS3.12 too aggressive for street tires? It can be. DS3.12 has a high mu and strong initial bite, which may activate ABS more frequently with street tires. Best used with slicks or R-compounds. 3. Which Ferodo pad is best for endurance racing? DS3.12 and DS1.11 are both endurance compounds, but DS3.12 offers longer life and more consistent torque at extreme temps. 4. Are Ferodo race pads noisy? DS2500 is very quiet. DS3.12 is relatively silent when bedded properly. DS1.11 can be noisy, especially when cold. 5. What’s the best pad for HPDE beginners? DS2500 is ideal for beginners using street tires and moderate track use. XP8 (from Carbotech) is another great option if more bite is needed. 6. Do Ferodo pads require bedding? Yes. Proper bedding ensures maximum performance, even pad wear, and rotor compatibility. Always follow the Ferodo bedding procedure included with your pads. How to Bed In Ferodo Racing Brake Pads (DS2500, DS1.11, DS3.12) Properly bedding in your Ferodo Racing brake pads ensures optimal performance, pad longevity, and rotor compatibility. Whether you're using Ferodo DS2500 for HPDE or DS3.12 and DS1.11 for professional-level endurance racing, following a structured bedding procedure is critical. Below is a simplified step-by-step chart to guide the break-in process. Step Description 1. Safety First Never perform the following activities on public roads but rather ensure you are in a safe and controlled environment such as a skidpad or racetrack for bedding in.  2. Initial Bedding Heat Cycles Perform 5 moderate stops from 60 mph to 10 mph without engaging ABS. Do not come to a complete stop. Allow light rolling between applications to avoid pad imprinting. 3. Medium Pressure Braking After light bedding, perform 10-15 hard stops from 80 mph to 10 mph using maximum pedal pressure to avoid ABS or locking the tires. Pads should begin to emit some odor and light smoke, indicating proper transfer layer development. 4. Cool-Down Phase Drive for 5 minutes whole minimizing brake use. This allows pads and rotors to cool gradually and evenly, preventing thermal shock and ensuring proper pad bonding. 5. Post-Bedding Rest Let the rest for 24-48 hours if possible. This helps fully cure the pad resins and stabilize the pad compound structure for maximum performance. Important Bedding Tips: Do not come to a complete stop while pads are hot.  Avoid heavy braking with new pads before completing the bedding process.  Always bed in pads and rotors as a matched set (used pads on new rotors or vice versa can cause poor performance).  Proper bedding improves brake modulation, reduces judder, and maximizes the lifespan of your Ferodo racing pads. Whether you run Ferodo DS2500 on the street or DS1.11 or DS3.12 on the track, take time to bed them in right—your braking performance depends on it. Important Note Ferodo Racing Brake Pads are for off-road use only. These products contain copper and are not legal for road use in some regions. It is the buyer’s responsibility to determine legal compliance based on their location.

Pagid Racing Brake Pad Shape No. 8188 Fits the Following Vehicles: Make Model Build (Year) Front Rear Mercedes A 45 AMG (W176) 2013 - 18      X Mercedes CLA 45 AMG 2013 - 18      X Mercedes SLK 55 AMG (R172) 2012 - 15      X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Pagid Racing Brake Pad Shape No. 8005 Fits the Following Vehicles: Make Model Build (Year) Front Rear Alfa Romeo Giulia 2.9 [952] Quadrifoglio 2015 + X Lexus IS-F 2008 - 11 X Maserati Ghibli (M157) [6-piston Brembo caliper / disc ø 360mm] 2013 - X Maserati Grand Turismo 2007 - X Mercedes SLK 55 AMG [R171] 2004 - 11 X Subaru STI 5th generation [6-piston Brembo caliper] 2015 - 21 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo HP 6-piston 165x82 16.4mm 8005 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 19 Compound: Pagid RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Pagid Racing Brake Pad Shape 4925 Fits The Following Cars: Make Model Build (Year) Front Rear Porsche 918 Spyder 15 - X Porsche 991 GT3 [ceramic brakes] 14 - 18 X Porsche 991 GT3 [iron brakes] 14 - 18 X Porsche 991 GT3 RS [ceramic brakes] 16 - X Porsche 991 GT3 RS [iron brakes] 16 - ; X Porsche 991 Turbo [ceramic brakes] 13 - 19 X Porsche 991 Turbo [iron brakes] 13 - 19 X Porsche 991 Turbo S [ceramic brakes] 13 - 19 X Porsche 991 Turbo S [iron brakes] 13 - 19 X Porsche 991.2 GT2 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 [ceramic brakes] 18 - 19 X Porsche 991.2 GT3 [iron brakes] 18 - X Porsche 991.2 GT3 RS [ceramic brakes] 19 - X Porsche 991.2 GT3 RS [iron brakes] 19 - X Porsche 991 R [ceramic brakes] 16 - X Porsche 991 911 Speedster [iron brakes] 19 - X Porsche 992 3.0 Carrera 4S [ceramic brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche 718 Cayman GT4 4.0 [982] [ceramic brakes] 19 - X Porsche Cayman GT4 [981] 16 - 20 X Porsche Cayman GT4 [981] [ceramic brakes] 16 - 20 X Porsche 992 Turbo [iron brakes] 20 - X Porsche 992 GT3 [iron brakes] 22 - X Porsche 992 Carrera S [ceramic brakes] 20 - X Porsche 992 GT3 [ceramic brakes] 22 - X Porsche 992 Turbo [ceramic brakes] 20 - X Porsche 718 Cayman GT4 4.0 RS [982] [iron brakes] 21 - X Porsche 718 Cayman GT4 4.0 RS [982] [ceramic brakes] 21 - X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

PFC 1299.XX.18.44 BRAKE PAD REAR PFC 11 COMPOUND A new generation sprint and medium-distance friction compound, giving you the ultimate in control with superior disc conditioning. Developed from the PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth, developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance oriented PFC 08 compound. PFC 332 COMPOUND 332 has been formulated with lower bite and torque for rear applications.With smooth release, the 332 offers excellent stability and control.The 332 has been designed to work with ABS applications, and has exceptionally low wear rates.

Ferodo FRP3096 Brake Pads Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo FRP3096 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FRP3096 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FRP3096 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP4379 Brake Pads Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo FCP4379 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP4379 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP4379 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Pagid Racing Brake Pad Shape No 4918 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 2011 - 15 X Porsche 991.2 3.0 Carrera [iron brakes] 2015 + X Porsche 981 Boxster Spyder 2015 + X Porsche 718 Cayman GTS 4.0 [cast iron brakes] 2016 + X Porsche Cayenne [cast iron or ceramic brakes] 2006 + X VW Touareg [ceramic brakes] 2008 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brakes No. 2704 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin Vantage V8 GTE [race car] 12 - 17 X Aston Martin Vantage V8 GTE [race car] Alcon caliper 18 - X Aston Martin Vantage V12 GT3 [race car] endurance 15 - 17 X Aston Martin Vantage V12 GT3 [race car] Alcon caliper 18 - X Audi R8 LMS GT3 [race car] 16 - 19 X Bentley Continental GT3 [race car] 18 - X BMW M8 GTE [race car] 18 - X Chevrolet Callaway Z06.R GT3 [race car] 16 - X Dodge Viper SRT GT3-R 13 - 17 X Ferrari 458 GTE [race car] 14 - 16 X Ferrari 488 GTE [race car] 17 - X Acura NSX GT3 [race car] 17 - X Alpine A110 Cup 17 - X Toyota GR Supra GT4 [race car] (Brembo calipers) 20 - X Alpine A110 GT4 17 - X Audi R8 LMS GT2 [race car] 20 - X Porsche 991.2 GT2 RS Clubsport [race car] 19 - X BMW M2 CS Racing [Permit A 450PS] 19 - 21 X Audi R8 LMS GT3 Evo 19 - 21 X Audi R8 LMS GT3 Evo II 21 - X Fits the Following Calipers: Make Type Remarks Shape No. Brembo 07.5139 [type 132 or B13 family] 16mm,20mm,22mm,25mm,26.5mm,29mm 1595, 1607, 1674, 2704, 8037, 8191 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Pre-Bedding Service Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes. Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts. To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 19-5, a variation on RSL 19, has a slightly higher, more aggressive coefficient of friction and a stronger initial bite than RSL 19. Often used on the rear axle of heavier GT3 and GTE cars to fine-tune brake bias. It can also be used on the front of lighter cars for a more aggressive feel than RSL 19. RSL 29 Compound: The PAGID RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL D1 Compound Pagid RSL D1 compound was engineered especially for race cars with high aerodynamic downforce levels, and with a wide brake balance range. Specifically developed for rear axle applications, the compound provides benefits in terms of vehicle stability during turn-in and unloading the front axle on corner exit. RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound: RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Applications include GT cars, touring cars and prototype endurance racing. Due to excellent modulation characteristics, RSL 2 is often also used in sprint races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST D1 Compound: Pagid RST D1 is especially for race cars with high aerodynamic downforce levels and with a wide brake balance range. Specifically developed for rear axle applications. The RST D1 compound provides benefits in terms of vehicle stability during the turn-in and corner-exit unloading of the front axle.