all

Sabelt Hero Superlight Women's TS-10 Driver Race Suit Light, Comfortable, and FIA 8856-2018 Approved The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is a professional-level women’s racing suit designed for drivers who want ultra-lightweight comfort, modern protection, and a fit tailored specifically for female racers. Built with premium multi-layer Nomex materials, the TS-10 delivers FIA-approved safety without unnecessary bulk. At only 265 g/m², the Hero Superlight TS-10 is one of the lightest women’s driver suits available. Its slim, ergonomic cut helps reduce excess material, while stretch panels in key movement zones improve flexibility and comfort in the cockpit. Built Specifically For Women Racing Drivers Unlike many race suits that simply resize a standard men’s pattern, the Sabelt Hero Superlight Women's TS-10 is tailored for a women-specific fit. The suit is shaped for comfort while seated in a race car, helping reduce bunching, restriction, and driver fatigue. Pre-curved sleeves help maintain a natural driving position, while elastic stretch panels around the elbows, knees, and lumbar area provide added movement and ventilation during long sessions. The lower-profile collar helps reduce restriction around the neck, making the suit more comfortable during extended track time. Lightweight Multi-Layer Nomex Protection The TS-10 uses a three-layer fire-resistant construction designed to balance protection, comfort, and weight savings. The outer layer is made from an extremely light woven flame-resistant material, while the soft Nomex inner layer adds comfort against the body. A honeycomb middle layer provides insulation without adding unnecessary bulk. For maximum lightness, this women’s racing suit does not use a waist belt. Instead, the clean slim-fitting design eliminates excess seams and unnecessary material. Even the accent stripes are printed to help save weight. Sabelt Hero Superlight Women's TS-10 Details FIA 8856-2018 approved Women-specific driver race suit fit Lightweight 265 g/m² fabric construction Multi-layer fireproof Nomex materials Soft knit Nomex inner layer for comfort Honeycomb middle layer for insulation Breathable and ergonomic construction Stretch panels for comfort and mobility Full floating sleeves Anti-bunching pre-curved arms Lower-profile collar for reduced restriction Front cellphone pocket No waist belt for reduced weight Black knit wrist and ankle cuffs Printed Sabelt logo details Available in multiple color options Why Choose The Sabelt Hero Superlight Women's TS-10? The Sabelt Hero Superlight Women's TS-10 Race Suit is ideal for women drivers who want a lightweight FIA-approved suit without sacrificing comfort or professional protection. Its low weight, slim fit, stretch panels, and women-specific tailoring make it a strong choice for club racing, endurance racing, HPDE competition, and serious motorsport use. With its clean design and premium Sabelt construction, the TS-10 delivers the comfort and mobility drivers need while maintaining the safety standards required for modern racing. Sabelt Women's Race Suit Sizing Proper race suit sizing is important for both comfort and safety. The Sabelt Hero Superlight Women's TS-10 is designed with a women-specific fit, so use the Sabelt women’s size chart when selecting your size. Frequently Asked Questions Q: Is the Sabelt Hero Superlight Women's TS-10 FIA approved?A: Yes. The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is FIA 8856-2018 approved for motorsport use. Q: Is this race suit made specifically for women?A: Yes. The TS-10 is tailored with a women-specific fit instead of using a resized men’s suit pattern. Q: How lightweight is the Sabelt Hero Superlight TS-10?A: The suit uses lightweight 265 g/m² fabric construction, making it one of Sabelt’s lighter professional-level women’s race suits. Q: Does the TS-10 have a waist belt?A: No. The Sabelt Hero Superlight Women's TS-10 does not use a waist belt in order to reduce weight and keep the suit slim and clean. Q: What materials are used in this suit?A: The TS-10 uses multi-layer fireproof Nomex materials, including a light woven outer layer, honeycomb insulation layer, and soft knit Nomex inner layer. Q: Is this suit comfortable for long races?A: Yes. Stretch panels, pre-curved arms, breathable construction, and a lower-profile collar help improve comfort during long sessions. Q: What colors are available?A: The Sabelt Hero Superlight Women's TS-10 is available in multiple color options, including pink, black, and white versions. Sabelt Women's Race Suit Sizing:

Chillout Systems No Drip 1/4" Shirt Adapters No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.  Chillout Systems No Drip 1/4" Shirt Adapter Details: Manufacturer: ChillOut Systems Manufacturer Part Number: CO-DLC-1 Works with other ¼" cooling shirts: Yes Quantity: 4 Pieces (2 complete sets) We have found in very long endurance races such as the 2021 World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.

C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

AiM 23-Pin MXS/MXP/MXG Strada Harness This add-on harness plugs into the 23 pin AMP connector on the AiM MXS 1.2 Strada, MXP Strada, and MXG 1.2 Strada street dashes to unlock certain dash features. If you don't want to build your own harness, this harness is required in order to use the following features: Analog input channels (8) Digital wheel speed channel (1) RPM input Digital output CAN2 stream input Manufacturer: AiM Manufacturer part number: V02573220 For use with AiM MXS 1.2 Strada (Standard and "Street Icons"), MXP Strada, and MXG 1.2 Strada only. Not for original MXS Strada, MXS/MXP/MXG data logging dashes, or any other dash or logger.

Paragon Air Blower Bundle Paragon’s Air Blower Bundle is assembled as a complete, all-in-one kit. The Paragon Air Blower Bundle is perfect when you want to bring fresh air into your helmet, and includes all the necessary Paragon products to connect a NACA duct inlet to your helmet. The Paragon Air Blower Bundle is light weight and compact, weighing only 6 lbs. total. Click Here for Installation Instructions The Paragon Air Blower Bundle Includes: Blower Air Filter Blower Air Filter Screen 1.25” Air Hose (10ft) 3” Air Hose (5ft) 240 CFM Blower Angled Helmet Fitting 4” Blower Hose Fitting 4” Blower Filter Housing Fitting

Garmin Catalyst Screw-Down Mount To mount the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Screw Down Mounting Kit. It includes a flat mount plate with two articulating balls and the special magnetic tablet mount. Can be connected to vehicle power with a cable (sold separately) to power your Garmin Catalyst through the magnetic mount. Screw Down Mounting Kit Details Manufacturer: Garmin Manufacturer Part Number: 010-13081-01 Engineered specifically to securely mount the Garmin Catalyst We have many racers that also take their Garmin Catalyst from their street car to their trackday/race car and the Garmin Screw Down Mounting Kit is a track worthy way of securing your Catalyst to your race car. In the Box Heavy-duty screw-down mounting plate Powered magnetic mount with 1" ball mount Two 1" connecting arms 1" arm connector

Garmin Dash Cam 67w is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Dash Cam 67w Includes 16 GB Class 10 Micro SD Card Want to record your track sessions without the fuss of setting up a full data acquisition system and lap timer? If so, then the Garmin Dash Cam 67w may be the solution you're looking for. That fact that it's also helpful for daily driving is a bonus, but that's not the main reason you're shopping at Competition Motorsport... Remarkably compact and discreet, this pocket-size dash camera boasts an impressive extra-wide 180º field-of-view in crisp, 1440p HD video. Garmin Clarity HDR optics capture stunning detail, even in low light. Keep your hands on the wheel and your eyes on the track, and use voice commands to tell the Garmin Dash Cam 67w to save video, start and stop audio recording, take still photos, and more. (Available in English, German, French, Spanish, Italian, and Swedish.) Dash Cam Features Abound The Garmin Dash Cam 67w is also perfectly suited to use as a daily-driver camera. It boasts advanced features like Automatic Recording, Incident Detection with GPS, Forward Collision Warning, Lane Departure Warning, "Go" Alerts, Parking Guard, and much more. So your Garmin Dash Cam 67w is as much at home on the road as at the race track. Durable By Design The Garmin Dash Cam 67w is built to withstand harsh vehicle environments, including direct sunlight, hot temperatures, and vibrations. Garmin Dash Cam 67w Details: Manufacturer: Garmin Manufacturer part no.: 010-02505-05 Dimensions: 2.2" x 1.6" x 0.9" Display size: 2.0" diagonal Display resolution: 320x240 px Display type: QVGA color TFT LCD Field of view: 180º diagonally Camera resolution: up to 1440p / 60 fps Micro SD: supports up to 512GB, Class 10 or faster Weight: 2.0 oz. (57g) Battery: rechargeable Li-Ion (up to 30 min/charge) Satellite positioning: both GPS and Galileo What's In The Box? Garmin Dash Cam 67w Pre-installed 16GB microSD card Low profile adhesive/magnetic mount Vehicle power cables Dual USB power adapter Documentation 

Ford S550 Mustang Front Rotors Take the already impressive stopping power of your Mustang GT, Bullitt, or Mach 1 to the next level with Girodisc two-piece floating front rotors. Designed specifically for the 380mm Brembo-equipped S550 platform, these rotors deliver the heat management and performance edge needed for street, autocross, and track-day driving—without altering OEM fitment or balance. Performance You Can Feel The Girodisc system is a direct bolt-on replacement that works perfectly with factory six-piston Brembo calipers. Each rotor weighs in at approximately 24.1 lbs, shedding nearly 10 lbs per corner compared to the stock setup. This reduction in rotational mass improves steering response, suspension behavior, and overall braking consistency under hard use. Girodisc A1-067 Vehicle Fitment • 2015–2023 Ford Mustang GT (Performance Package, Brembo 6-piston)• 2019–2020 Ford Mustang Bullitt• 2021–2023 Ford Mustang Mach 1 Features • 380mm x 34mm rotor—direct OE replacement• 6061-T6 aluminum hat, made in the USA• Proprietary cast iron disc with 72 internal curved vanes for superior cooling• Floating mount system with anti-noise spring washers• Roughly 9 lbs lighter per side than OEM rotors• Sold/priced per pair Ford S550 Mustang Front Rotor FAQs: Are these rotors a direct fit? Yes, they bolt right onto the factory six-piston Brembo setup without modification. Do they require different brake pads? No, you can use your existing pads, though performance compounds are recommended for track use. How do Girodisc rotors improve performance? The reduction in unsprung weight and advanced vane design improve both cooling and response during repeated hard braking. Are replacement rings available? Yes, replacement rings are sold separately so you can reuse the aluminum hats when needed. Upgrade your Mustang’s stopping confidence with Girodisc—precision-engineered rotors that balance track performance with daily drivability.

Performance Friction PFC Brake Pads 0919.XX.16.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 0919.XX.16.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 0919.XX.16.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 0919.XX.16.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. Fits the Following Cars (Rear Axle): BMW 1M 2007-13 E82 Coupé BMW 1M 2007-13 E82 E82-1M BMW 6 Series 2004- E63 635 / E64 630,645,650 BMW 7 Series 2002- E65 / E66 BMW M3 2008-13 E90 / E92 / E93 BMW M3 2008-13 E92 E92-M3 BMW M5 / 535d 2006-10 E60

Performance Friction PFC Brake Pads 1656.XX.16.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 1656.XX.16.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 1656.XX.16.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 1656.XX.16.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance sports car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds, easily matching the wear characteristics of competitors' materials but with much higher bite and consistent performance across a broad temperature range. Fits the Following Cars (Rear Axle): Make Model Year Notes BMW 228i with Blue Caliper 2014 - 2016 Rear BMW 228i xDrive with Blue Caliper 2015 - 2016 Rear BMW 230i with Blue Caliper 2017 - 2020 Rear BMW 230i xDrive with Blue Caliper 2017 - 2020 Rear BMW 320i with Blue Caliper 2016 - 2018 Rear BMW 320i xDrive with Blue Caliper 2016 - 2018 Rear BMW 328d with Blue Caliper 2012 - 2014 Rear BMW 328i GT xDrive with Blue Caliper 2014 - 2015 Rear BMW 328i with Blue Caliper 2012 - 2016 Rear BMW 328i xDrive with Blue Caliper 2013 - 2016 Rear BMW 330i with Blue Caliper 2017 - 2019 Rear BMW 330i xDrive with Blue Caliper 2017 - 2019 Rear BMW 335i GT xDrive with Blue Caliper 2014 - 2016 Rear BMW 335i with Blue Caliper 2012 - 2015 Rear BMW 335i xDrive with Blue Caliper 2013 - 2015 Rear BMW 340i with Blue Caliper 2016 - 2018 Rear BMW 340i xDrive with Blue Caliper 2016 - 2019 Rear BMW 428i Gran Coupe with Blue Caliper 2015 - 2016 Rear BMW 428i with Blue Caliper 2014 - 2016 Rear BMW 428i xDrive Gran Coupe with Blue Caliper 2015 - 2016 Rear BMW 428i xDrive with Blue Caliper 2014 - 2016 Rear BMW 430i Gran Coupe with Blue Caliper 2017 - 2020 Rear BMW 430i with Blue Caliper 2017 - 2020 Rear BMW 430i xDrive Gran Coupe with Blue Caliper 2017 - 2020 Rear BMW 430i xDrive with Blue Caliper 2017 - 2020 Rear BMW 435i Gran Coupe with Blue Caliper 2015 - 2016 Rear BMW 435i with Blue Caliper 2014 - 2016 Rear BMW 435i xDrive Gran Coupe with Blue Caliper 2015 - 2016 Rear BMW 435i xDrive with Blue Caliper 2014 - 2016 Rear BMW 440i Gran Coupe with Blue Caliper 2017 - 2020 Rear BMW 440i with Blue Caliper 2017 - 2020 Rear BMW 440i xDrive Gran Coupe with Blue Caliper 2017 - 2020 Rear BMW 440i xDrive with Blue Caliper 2017 - 2020 Rear BMW ActiveHybrid 3 with Blue Caliper 2013 - 2015 Rear BMW M2 with Blue Caliper 2016 - 2021 Rear BMW M235i with Blue Caliper 2014 - 2016 Rear BMW M235i xDrive with Blue Caliper 2015 - 2016 Rear BMW M240i with Blue Caliper 2017 - 2020 Rear BMW M3 F80 with Blue Caliper 2015 - 2018 Rear BMW M4 F82 with Blue Caliper 2015 - 2020 Rear

Pagid Racing Brake Pad Shape 8023 Pagid 8023 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Alfa Romeo 4C 2014 - 20 X Chevrolet Cobalt SS Turbocharged 2008 - 10 X Fiat 500 1.4 Abarth [Brembo brakes] 2009 + X Fiat Abarth 124 Spider [Brembo brakes] 2016 + X Mazda MX-5 Miata ND [Brembo brakes] 2016 + X Mazda MX-5 Miata Global Cup Car 2016 + X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Antigravity SC-4 Super-Charger The Antigravity SC-4 Super-Charger is a compact 4-Amp charging solution built for everyday riders, weekend racers, and anyone who wants reliable battery maintenance. Perfect for lithium or lead/acid batteries up to 120Ah, this smart charger combines advanced safety protections with easy-to-use features. Whether you’re prepping your track car, maintaining a motorcycle during the off-season, or keeping a tractor ready for work, the SC-4 delivers dependable power without the guesswork. Smart charging made simple Antigravity SC-4 Super-Charger Features Multi-use versatility: works with cars, trucks, motorcycles, ATVs, UTVs, RVs, tractors, boats, and more. Multi-chemistry support: compatible with Lithium (LiFePO4/LFP) and Lead/Acid (AGM, STD, GEL, WET, VRLA). Multi-voltage operation: charges 6V and 12V lithium plus 12V lead/acid types. LCD digital display: shows real-time voltage, current, and charging progress. Two-button simplicity: quickly select battery type or special function. Built-in voltage tester: monitor your battery health without extra tools. Power supply mode: delivers 14v at 4A to keep electronics live during swaps. BMS Re-Set function: wakes lithium batteries that enter protection mode. Recondition mode: attempts to revive sulfated or undercharged lead/acid batteries. Automatic Winter Mode: optimized charging in cold conditions. Compact size: 7.8 x 3.7 x 1.8 inches with IP65 protection rating. Specifications Input Voltage 110–120V AC ~ 50–60 Hz (US plug) Output Voltage 6V / 12V DC Max Output Current @ 6V 2A Max Output Current @ 12V STD/AGM/LFP 4A Battery Capacity Range 3Ah – 120Ah Recondition Mode 16.5V DC / 1.5A (lead/acid only) Operating Temperature -4°F to 104°F (-20°C to 40°C) Protection Class Class II, IP65 Dimensions 7.8" × 3.7" × 1.8" Warranty 3 years UPC 711811704901 SKU AG-BC-SC-4 FAQs: Antigravity SC-4 Super-Charger What size batteries can the SC-4 handle? It’s designed for battery capacities from 3Ah up to 120Ah, making it ideal for motorcycles, ATVs, and daily drivers. Is the SC-4 safe to leave connected long-term? Yes. It has automatic maintenance mode and built-in safety protections, so you can keep it connected without worry. How is the SC-4 different from the SC-10? The SC-4 provides 4A charging, best for small to mid-size batteries. The SC-10 offers faster 10A charging and is better for larger-capacity batteries. Can I use it for battery swaps? Absolutely. The 4A power supply function keeps vehicle electronics energized so you don’t lose settings during battery changes. Keep your batteries healthy and ready to go with the Antigravity SC-4 Super-Charger. Order today and enjoy dependable, easy-to-use charging technology built for real-world performance.

OMP OTW Pit Crew Shoes OMP Pit Crew Shoes: Where Comfort Meets Durability In the Pit Lane Ever felt like your feet were just another part of the car, absorbing every bump and vibration on the track? Well, kiss those days goodbye! The OMP Pit Crew Shoes are here to shift your foot comfort into high gear. Designed with the adrenaline junkie in mind, these shoes are the perfect co-pilot for over-the-wall crews, track workers, extreme off-road racers, and anyone who believes that life is too short to drive boring cars. OMP Pit Crew Shoes Features Built for the Long Haul: Crafted from the finest suede leather panels, these shoes aren't just a pretty face. They're tough, durable, and ready to handle the heat when the race is on. Safety First, But Make It Fashion: With inner protective material, these shoes don't just look good—they provide unmatched protection against the elements and the unexpected. Secure Your Victory: Laces and an ankle Velcro strap ensure your shoes stay on your feet, where they belong, no matter how intense the action gets. Comfort That Keeps on Giving: Internal padding, along with ankle and arch support, means your feet will feel as fresh at the finish line as they did at the starting line. Certified and Ready: SFI 3.3/5 homologated, because your safety is not a pit stop—it's the main event. Experience the Difference Imagine standing at the edge of the track, the roar of engines filling the air, the smell of burning rubber and victory in the nose. Your feet? They're as comfortable as they are in your favorite slippers, encased in the OMP Pit Crew Shoes. Whether you're sprinting to change a tire or navigating the rugged terrain of an off-road race, these shoes are your trusty sidekicks, ensuring every step is secure, protected, and oh-so-comfortable. OMP Pit Crew FAQs Q: Can these shoes really handle the heat of racing? A: Absolutely! Designed with the demands of racing in mind, they're built to withstand the heat, pressure, and intensity of the track. Q: Are they only for professional racers? A: Not at all! Whether you're a professional pit crew member, an amateur racer, or just someone who loves the racing lifestyle, these shoes are for you. Ready to Step Up Your Game? Don't let subpar footwear hold you back from crossing the finish line. With the OMP Pit Crew Shoes, you're not just buying a pair of shoes; you're investing in comfort, safety, and the sheer thrill of racing. So, why wait? Grab your pair today and feel the difference with every step, turn, and victory lap. Your feet (and your podium finish) will thank you.

Paragon Ignite FR SFI 3.3 Rated Cooling Shirt The Paragon Ignite top is Paragon’s flame-retardant option for keeping the core cool in the most intense environments. The garment is 4.8 oz, Modacrylic and FR Rayon blend with intense quick drying qualities and ample tubing to cover the core. Available in S – XXL with a true to size fit, long sleeve or short sleeve, right or left exit of the tubing. The Ignite Long Sleeve top meets SFI 3.3 specifications.. Keep Cool With SFI 3.3 Rated Protection The Paragon Ignite FR long sleeve cooling top meets SFI 3.3 specifications. Available in sizes Small through XXL with a true-to-size fit and right- or left-exit tubing.  Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite FR series is for you. Paragon Ignite FR Cooling Shirt Details Manufacturer: Paragon Flame resistance rating: SFI 3.3 certified Tubing exit: choose left- or right-exit Construction: Modacrylic/FR Rayon blend for superior moisture wicking Anti-microbial: Ag47 protection Won’t shrink, pick, or fade Extra length Clean seams for all-day comfort Machine wash, machine dry

Sparco SPX Reclining Seat (non-FIA)  The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars.  In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers and weighs only 28 pounds. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today. The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips. Beautifully Upholstered, Amazingly Light The SPX is covered in a combination of beautifully perforated and buttery-smooth Italian leathers. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position.  The SPX is sold in driver and passenger versions (left and right). Sparco SPX Carbon Reclining Seat Details Lightest carbon fiber reclining seat on the market Gloss carbon fiber back rest RTM composite lower (an advanced composite with strength and weight similar to carbon fiber) Covered in hand-stitched Italian leather and Alcantara suede Leather pull for seat back release Sold in driver (left) and passenger (right) configurations This seat is not FIA compliant and is not intended for use in racing or other competition applications SPX Seat Dimensions A Little Sparco History Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts.  Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.

Stilo ST6 CMR Carbon Zero Karting Helmet The Stilo ST6 CMR Carbon Zero is the lightest CMR-2016 certified youth karting helmet ever made. Engineered from ultra-high-grade full carbon fiber, this helmet breaks the 2.2lb barrier while delivering exceptional strength and protection. Designed for the next generation of competitive drivers, the ST6 CMR Zero brings Formula 1 innovation directly to the karting grid—offering unmatched visibility, aerodynamic performance, and elite driver-focused features. Drawing from Stilo’s F1 pedigree, the Carbon Zero introduces a wider downward field of vision for improved track awareness, precision, and race-day confidence. The helmet's newly developed ventilation architecture ensures maximum cooling during high-intensity driving, while new shell sizes – extra-small (53–56 cm) and small (57–59 cm) – reduce exterior dimensions for improved aerodynamics and a race-tailored fit. Inside, a reimagined crown and cheek pad system improves comfort and helmet stability during long stints. The 3mm FIA-approved, double-glazed visor includes an anti-fog treatment and features a reinforced locking system for maximum safety under pressure. Every aspect of the ST6 CMR Carbon Zero has been engineered to support young drivers chasing podiums at the highest level of karting. Stilo ST6 CMR Carbon Zero Kart Racing Helmet Features CMR-2016 certified for youth karting competition Constructed from ultra-lightweight full carbon fiber Weighs under 1000g to reduce neck strain and driver fatigue Improved eyeport with expanded downward visibility Optimized F1-inspired ventilation system for maximum airflow New XS and S shell sizes for tailored aerodynamic fit 3mm injection-molded, double-glazed anti-fog visor Upgraded interior padding and redesigned crown for comfort and security Stilo ST6 CMR Carbon Zero Kart Racing Helmet FAQs Is the Stilo ST6 CMR Carbon Zero helmet CMR-2016 certified? Yes. The ST6 CMR Carbon Zero is fully homologated to FIA CMR-2016 standards, making it legal for use in all youth karting competitions that require CMR certification. How much does the ST6 CMR Carbon Zero helmet weigh? This helmet weighs less than 1000 grams, making it the lightest CMR helmet available. Its full carbon construction dramatically reduces neck fatigue and improves long-session comfort for young drivers. What is the difference between the Carbon Zero and other ST6 models? The Carbon Zero uses a full carbon fiber shell instead of composite materials, making it significantly lighter while maintaining elite safety performance. It also introduces new shell sizes and aerodynamic enhancements for youth racers. Who is the ST6 CMR Carbon Zero helmet designed for? This helmet is designed specifically for serious youth kart racers competing at the highest level. It combines F1-derived technology, lightweight performance, and professional-level safety features. Does this helmet include a visor and how is it secured? Yes, it includes a 3mm double-glazed visor with an anti-fog finish and a reinforced locking system. It’s designed to stay secure during high-speed racing and adverse weather conditions. Are multiple sizes available for this helmet? Yes. The ST6 CMR Carbon Zero introduces two new compact shell sizes: XS (53–56) and S (57–59), allowing for a better fit and improved aerodynamics for younger drivers. Stilo helmets are worn by winning drivers worldwide, including well known F1 Mercedes driver Valterri Bottas, Monster Energy NASCAR Cup Series Champions Martin Truex, Jimmie Johnson and Kyle Busch, IndyCar Series Champion Tony Kanaan and WRC Champion Sébastien Loeb. STILO ST6 CMR KART RACING HELMET SIZE CHART More Frequently Asked Questions FAQs Does the helmet provide good airflow and cooling? Yes. The ST6 CMR Carbon Zero includes large front and top vents that feed into an internal ventilation system, ensuring consistent airflow to keep drivers cool and focused even in hot conditions. Can this helmet be used in competitive karting events? Absolutely. The ST6 CMR Carbon Zero is CMR-2016 certified, which is required for most national and international youth karting competitions. Is Stilo a good brand for kart racing helmets?Yes—Stilo kart racing helmets are highly regarded in the motorsports world for their innovation, safety, and Italian craftsmanship. The Stilo ST6 CMR Carbon Zero Karting Helmet is specifically designed for younger drivers and offers professional-grade features in a lightweight, competition-ready design. Whether you're just entering the sport or competing at the national level, Stilo delivers championship-level protection and comfort. Where are Stilo kart helmets made?Stilo helmets, including the ST6 CMR Carbon Zero, are engineered and manufactured in Italy. Every helmet undergoes rigorous design, development, and testing to meet exacting safety standards. The result is a high-performance karting helmet trusted by racers across the globe. Do Stilo kart racing helmets run true to size?Yes, Stilo helmets generally run true to size. To find the best fit, measure the circumference of the driver’s head just above the eyebrows and refer to Stilo’s official sizing chart. The ST6 CMR Carbon Zero is offered in various sizes from 53cm to 59cm to accommodate junior drivers, making it one of the best karting helmets for kids and young adults looking for professional protection. What professional kart racers use Stilo helmets?Stilo is the helmet of choice for many top drivers in FIA Karting, WSK, and other international series. The Stilo ST6 CMR Carbon Lite shares the same aerodynamic shell shape as the adult ST6 models, making it a favorite for rising talents who want a lightweight kart helmet with advanced visibility and airflow similar to what the pros use. Is the Stilo ST6 CMR suitable for all ages?The ST6 CMR Carbon Zero is designed for young drivers under 15, as required by FIA regulations. Its lightweight shell and smaller sizing options make it ideal for youth racers needing superior protection, comfort, and performance during competitive karting events. Where can I buy authentic Stilo ST5 CMR Carbon Zero Karting Helmets?Right here at Competition Motorsport. As an authorized Stilo dealer, we carry the full lineup of Stilo kart racing helmets, including the youth-specific ST6 CMR Carbon Zero. Enjoy fast shipping, expert support, and trusted service from a team that knows motorsports from the inside out. Kart Racing Helmet Frequently Asked Questions (FAQ) Remember that safety is paramount in kart racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at Competition Motorsport any time you have specific questions about your racing helmet. What is the best helmet for kart racing? The Stilo ST6 CMR Carbon Zero kart helmet is widely considered one of the best youth karting helmets, offering premium features for serious kart racers. Why do I need a racing helmet?Auto and kart racing helmets are essential for protecting your head in high-speed accidents. They also shield against debris and, in some motorsports, fire—making them a non-negotiable safety requirement. How do I choose the right size Kart Racing helmet?Use a flexible tape to measure the circumference of your head just above your eyebrows and ears. Compare the measurement to the size chart. For more help, read our blog on how to fit your helmet properly at Competition Motorsport. What safety standards should I look for in a youth kart racing helmet? Look for the FIA CMR-2106 certification for karting. Can I use a motorcycle helmet for kart racing?No. Motorcycle helmets lack the kart-specific certifications and features like proper ventilation and impact resistance optimized for karting. Always use a helmet rated for motorsport competition. How often should I replace my kart racing helmet?Replace your helmet every few years depending on usage and the manufacturer's guidance. If it’s been dropped, involved in an impact, or shows signs of wear, replace it immediately. Are expensive racing helmets safer than budget ones?Yes, typically. While both must meet minimum safety standards, premium helmets offer lighter materials, better fit, improved aerodynamics, and enhanced comfort, all of which impact race performance and fatigue. How do I maintain and clean my kart racing helmet?Clean the exterior and interior using a helmet-specific care product like the Molecule Helmet Care Kit. Avoid submerging the helmet or using abrasive cleaners. Visors should be cleaned gently to avoid scratching. Do I need to wear a balaclava under my kart racing helmet?While not required for all karting events, a balaclava enhances comfort, keeps your helmet liner clean, and helps wick sweat. Fire-rated balaclavas are mandatory in sanctioned auto racing and recommended for high-performance karting. Can I wear glasses with my kart racing helmet?Yes. Wide eye ports, make it compatible with most prescription glasses and racing eyewear. A good fit ensures the glasses remain stable and fog-free. Are carbon fiber helmets better?Carbon fiber helmets are lighter and stronger, reducing fatigue during long races while offering excellent impact protection. They are a top choice for competitive drivers. Can I use a used helmet for racing?It’s not recommended. Damage or degradation may not be visible, and older helmets might not meet current safety standards. Always buy new from an authorized dealer like Competition Motorsport. What's the importance of proper helmet ventilation?Good ventilation helps manage heat and moisture inside the helmet, reducing fatigue and keeping you focused throughout your race. How do I store my kart racing helmet between races?Store your helmet in a cool, dry place away from direct sunlight. Use a padded helmet bag like our Competition Motorsport Evo Helmet Bag to prevent damage during transport or storage. What is the difference between Snell K2020 and CMR2016 certifications? Snell K2020 is designed for adult karting helmets, focusing on impact protection. CMR2016 is tailored for drivers under 15, offering a lighter helmet to reduce neck strain while maintaining safety standards. Are tear-off visors necessary for kart racing? Tear-off visors are beneficial in maintaining clear vision during races by allowing drivers to remove a dirty visor layer quickly. They are especially useful in outdoor karting where debris and dirt are common. How do I know if my helmet is still safe to use? Helmets should be inspected regularly for signs of wear or damage. If a helmet has been involved in a significant impact or shows signs of degradation, it should be replaced immediately. Additionally, helmets should be replaced every 5 years, even if no damage is visible. Can I customize my kart racing helmet? Yes, many manufacturers offer customization options for fit and aesthetics. However, any modifications should not compromise the helmet's structural integrity or safety certifications.