all

Chillout Systems 1.5 Liter Coolant Formula 1.5 liters of coolant lasts a racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Alpinestars Tech-1 KX v4 FIA 8877-2022 Karting Gloves The Alpinestars Tech-1 KX v4 Karting Gloves are premium competition gloves engineered for racers who demand precise steering feedback, secure grip, and lasting comfort. Certified to the FIA 8877-2022 Grade 1 standard, the Tech-1 KX v4 combines a breathable dual-layer mesh construction with external seams, pre-curved fingers, and advanced 3D grip printing.A synthetic suede palm provides durability and tactile feedback, while silicone grip zones across the palm and fingers create a secure connection with the steering wheel. The lightweight construction and anatomically shaped fit help reduce hand fatigue during demanding races and extended track sessions. FIA 8877-2022 Grade 1 Karting Approval The Alpinestars Tech-1 KX v4 is homologated to the FIA 8877-2022 Grade 1 standard for karting apparel. This approval confirms that the gloves meet current FIA requirements for protection, durability, and performance in competitive kart racing. Drivers should verify the exact equipment regulations of their championship or sanctioning organization before entering an event. Advanced 3D Silicone Grip Technology Three-dimensional silicone printing is strategically positioned across the palm and fingers to improve steering-wheel traction. The raised pattern helps reduce unwanted hand movement during braking, cornering, and rapid steering corrections. The flexible grip design follows the movement of the hand and preserves steering sensitivity, allowing the driver to maintain control without squeezing the wheel excessively. Synthetic Suede Palm Construction The palm combines synthetic suede with silicone grip printing to deliver durability, traction, and tactile feedback. Synthetic suede provides a stable contact surface while remaining flexible enough for precise steering inputs. This construction helps the driver feel changes in front-end grip and chassis behavior without adding unnecessary bulk between the hand and steering wheel. External Seams for Reduced Pressure External finger seams move the stitching away from the inside of the glove, creating a smoother interior and reducing pressure points around the fingers. This construction is especially beneficial during long races, where conventional internal seams can cause irritation or discomfort through repeated steering movement. Pre-Curved Finger Design The Tech-1 KX v4 uses pre-curved fingers that follow the natural shape of the hand around a kart steering wheel. This reduces material bunching and minimizes the effort required to maintain a consistent grip. The shaped construction also improves dexterity and helps reduce fatigue during endurance races, repeated practice sessions, and physically demanding track conditions. Dual-Layer Breathable Mesh An advanced dual-layer mesh assembly promotes airflow through the upper glove and helps manage heat during competition. The lightweight, ventilated construction keeps the hands more comfortable without compromising fit or support. Improved breathability is particularly valuable during warm-weather events, indoor karting sessions, and races requiring sustained physical effort. Ergonomic Palm Structure The palm is shaped to follow the natural contours of the hand, improving fit and reducing excess material. This close construction allows the glove to move consistently with the driver’s hand rather than shifting independently during steering inputs. The ergonomic design supports precise control while maintaining the flexibility required for quick corrections and aggressive karting techniques. Touchscreen-Compatible Fingertip A touchscreen-compatible fingertip allows the driver to operate many compatible phones, tablets, timing systems, and data devices without removing the gloves. This feature is useful between sessions when reviewing lap times, checking schedules, or communicating with the team. Secure Ribbed Cuff and Elasticated Wrist A ribbed cuff provides a close fit around the wrist, while the 180-degree elasticated wrist construction allows easy entry and secure retention. The streamlined opening keeps the glove positioned without requiring a bulky external strap. The flexible cuff also helps the glove remain comfortable during repeated wrist movement and extended driving sessions. Alpinestars Tech-1 KX v4 Karting Glove Features FIA 8877-2022 Grade 1 homologated Advanced dual-layer breathable mesh construction Synthetic suede palm provides durability and steering feel Three-dimensional silicone grip printing on the palm and fingers External finger seams reduce internal pressure points Pre-curved fingers support a natural driving position Ergonomic palm structure improves fit and control Lightweight construction helps reduce hand fatigue Touchscreen-compatible fingertip Ribbed cuff provides a close wrist fit 180-degree elasticated wrist allows easy entry Designed for competitive kart racing Alpinestars Tech-1 KX v4 Specifications Manufacturer: Alpinestars Model: Tech-1 KX v4 Product Type: Kart Racing Gloves Upper Construction: Dual-Layer Breathable Mesh Palm: Synthetic Suede with Silicone Grip Grip Technology: 3D Silicone Print Finger Construction: Pre-Curved with External Seams Cuff: Ribbed Wrist: 180-Degree Elasticated Entry Touchscreen Compatibility: Yes Homologation: FIA 8877-2022 Grade 1 Why Choose the Alpinestars Tech-1 KX v4? The Tech-1 KX v4 is designed for racers who want a close connection with the kart without sacrificing ventilation or comfort. Its synthetic suede palm and 3D silicone grip provide dependable traction, while the external seams and pre-curved fingers create a smooth, natural fit. For competitive drivers seeking current FIA approval, precise steering feedback, and premium Alpinestars construction, the Tech-1 KX v4 delivers a well-balanced combination of grip, breathability, and fatigue-reducing comfort. Alpinestars Tech-1 KX v4 Kart Racing Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 KX v4 Gloves FIA approved?Yes. The gloves are homologated to the FIA 8877-2022 Grade 1 standard for karting apparel. What type of palm grip do the gloves use?They combine a synthetic suede palm with three-dimensional silicone printing to improve steering-wheel traction and control. Do the Tech-1 KX v4 Gloves have external seams?Yes. External finger seams reduce pressure points and create a smoother interior around the fingers. Are the fingers pre-curved?Yes. The pre-curved design follows the natural shape of the hand around the steering wheel and helps reduce material bunching. Are the gloves breathable?Yes. An advanced dual-layer mesh construction promotes airflow and helps manage heat during demanding karting sessions. Can the gloves be used with touchscreen devices?Yes. A touchscreen-compatible fingertip allows operation of many compatible phones, tablets, and timing devices. What type of wrist closure do the gloves use?They use a ribbed cuff and a 180-degree elasticated wrist for easy entry and secure retention. Are the Tech-1 KX v4 Gloves suitable for long races?Yes. Their lightweight materials, pre-curved fingers, breathable mesh, and external seams are designed to improve comfort during extended sessions. Can these gloves be used for sim racing?Yes. Their lightweight construction and silicone grip can provide useful steering-wheel control and tactile feedback for sim racing, although they are primarily designed for competitive karting. How should the Alpinestars Tech-1 KX v4 Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excessive material at the fingertips.

Alpinestars GP Pro Comp v2 Driver Race Suit FIA 8856-2018 Driver Race Suit With Lightweight Breathable Construction The Alpinestars GP Pro Comp v2 Driver Race Suit is engineered for drivers who need FIA-certified protection, breathable comfort, and unrestricted mobility in the cockpit. Featuring an outer shell material developed exclusively for Alpinestars, the GP Pro Comp v2 combines lightweight multi-layer protection with a soft aramidic base knit lining for comfort, protection, and performance. Certified to the latest FIA 8856-2018 homologation standard, this Alpinestars race suit is built for serious motorsport use while maintaining the flexibility and breathability drivers need during long sessions behind the wheel. Breathable Multi-Layer Protection The GP Pro Comp v2 uses a lightweight multi-layer construction with a soft aramidic base lining. The open-weave structure of the lining helps improve airflow, while the 100% aramidic antistatic outer shell provides exceptional heat and flame resistance. Strategically positioned knitted stretchable open-mesh panels on the back, crotch, and armholes add airflow and flexibility, helping regulate body temperature while allowing the suit to move naturally with the driver. Silicon Grip Technology Innovative silicon grip detailing is applied to the shoulders and lower back to help prevent sliding in the race seat. These grip zones also help stabilize the HANS device and relieve pressure on the shoulders, giving the driver a more secure connection with the racing seat. Built For Driver Mobility Alpinestars fully-floating arm construction uses stretchable knit fabric to reduce material resistance while driving. Formula One-derived flexible mesh panels on the lower back and crotch further enhance freedom of movement both in and out of the car. The athletic/regular fit, tall ribbed collar, ribbed wrist and ankle cuffs, and double-slider YKK metal zipper all work together to create a race suit that is protective, comfortable, and easy to wear in demanding motorsport environments. Cooling Shirt And Communications Access The Alpinestars GP Pro Comp v2 includes a Formula One-derived cable opening on the left side for cooling shirt and/or communications wiring. This opening is covered by a self-closing flap to maintain a clean exterior profile while keeping system access convenient. Alpinestars GP Pro Comp v2 Driver Race Suit Details Certified to the latest FIA 8856-2018 homologation standard Lightweight and breathable multi-layer construction Soft aramidic base knit lining Stretchable mesh panels for comfort and temperature regulation Silicon grip technology on shoulders and lower back Positive connection with HANS device and racing seat Formula One-derived cable opening for cooling shirt or communications wiring Self-closing flap over left-side cable opening Formula One-derived flexible mesh panels on lower back and crotch Athletic/regular fit Weight: 345 g/m² Alpinestars GP Pro Comp v2 Driver Race Suit Construction Fully-floating arms with stretchable knit fabric Reduced material resistance while driving 100% aramidic antistatic outer shell fabric Exceptional heat and flame resistance Ribbed wrist and ankle cuffs for comfort and reduced weight Tall ribbed collar for extended neck coverage Alpinestars shoulder epaulette construction for driver extraction Premium YKK metal zipper for durability Double-slider front zipper for a customizable fit Thigh pockets for convenient storage “ALPINESTARS PROTECTS” slogan on lower back lining Laundry bag included for material fiber protection Why Choose The Alpinestars GP Pro Comp v2 Race Suit? The Alpinestars GP Pro Comp v2 Driver Race Suit is a premium choice for drivers who want FIA-approved protection, breathable aramid construction, advanced stretch zones, and professional Alpinestars racewear technology. With silicon grip details, floating arms, Formula One-derived flexible panels, and integrated cooling/communications access, the GP Pro Comp v2 is designed for comfort, safety, and performance in the cockpit. Frequently Asked Questions Q: Is the Alpinestars GP Pro Comp v2 FIA approved?A: Yes. The Alpinestars GP Pro Comp v2 Driver Race Suit is certified to the FIA 8856-2018 homologation standard. Q: What material is used in the GP Pro Comp v2?A: The suit uses a 100% aramidic antistatic outer shell with a soft aramidic base knit lining for protection, comfort, and breathability. Q: Does this suit have stretch panels?A: Yes. Stretchable open-mesh panels are positioned on the back, crotch, and armholes to improve airflow and flexibility. Q: What does the silicon grip technology do?A: Silicon grip detailing on the shoulders and lower back helps prevent sliding in the race seat, stabilize the HANS device, and reduce pressure on the shoulders. Q: Does the GP Pro Comp v2 work with cooling shirts or communications wiring?A: Yes. The suit includes a left-side Formula One-derived cable opening for cooling shirt and communications wiring, covered by a self-closing flap. Q: What fit does this race suit have?A: The Alpinestars GP Pro Comp v2 has an athletic/regular fit designed for comfort and mobility in the driving position. Q: What is the suit weight?A: The Alpinestars GP Pro Comp v2 Driver Race Suit weighs 345 g/m². Alpinestars GP Pro Comp v2 Driver Race Suit Size Chart

APEX Pro Motorsports Phone Mount The APEX Pro Motorsports Phone Mount was designed in-house by APEX Pro for the demands and rigors of driving on track. The strong suction base is rated for five pounds, so holding your phone securely is no problem. The sleek anodized aluminum phone holder is adjustable and can hold the largest smart phones currently available. This mount is designed to shake less while recording video compared to other phone mounts. (Depending on your phone and the camera lens location – not centralized like an action cam – there's likely to still be some shakiness in your video.) This phone mount is perfect when paired with the Lap Timer Plus in-app purchase available on the home screen of the APEX Pro app. Phone Mount Features Securely mounts any phone from 2.6" to 3.6" (66 to 91mm) wide, including case. Designed for use with Lap Timer Plus. Tough anodized aluminum mount. Fits any size phone. (Not compatible with iPod Touch.) Great for timing, scoring, and video-recording apps on the road and at the track. Tilt and lock the hinge with 360o rotation ability. Sturdy design for smooth or rough surfaces. Perfect way to display the APEX Pro app.

OMP Carbon Rib Protector Elite-Level Protection in a Featherweight Shell Built for serious kart racers, the OMP Carbon Rib Protector combines a full carbon-fiber shell with an anatomic, low-profile fit to shield your ribs while preserving natural movement. Multi-density padding helps disperse impact energy and dampen vibration, so you can push harder with confidence—whether you’re chasing tenths at a national event or dialing in pace at your local track. Highlights Carbon-fiber outer shell for high impact resistance with minimal weight Multi-layer foam interior to absorb vibration and side impacts Anatomically contoured design for comfort and freedom of movement Adjustable shoulder and side straps for a secure, customized fit Low-profile shape to wear comfortably under most kart suits Sizing Measure chest circumference (inches) at the widest point: Size Chest (in) XS 29–34 S 32–39 M 35–41 L 39–44 XL 43–48 FAQ What is the benefit of a carbon-fiber shell? Carbon fiber offers an exceptional strength-to-weight ratio, providing serious impact protection without the bulk of traditional materials. Who is this rib protector for? Competitive and professional kart racers seeking a lightweight, high-protection vest with a race-ready fit. Can it be worn under any karting suit? Yes. Its low-profile, ergonomic shape is designed to fit comfortably under most modern CIK/FIA-approved suits without restricting movement. Does it come in multiple sizes? Yes. Youth and adult sizes are available. Use the chest measurement guide above to choose the best fit. How is the fit adjusted? Adjustable shoulder and side straps let you fine-tune fit and keep the protector securely in place during high-G corners and long stints. Note: Always confirm current series requirements before competition and select the size that provides a snug, protective fit.

Trac-Com V4 Intercom Base Unit Driver/Passenger Communicators That Are Built to Last   The Trac-Com V4 Intercom has been redesigned from the ground up with increased volume, an LCD screen, and a dual battery system. Fully compatible with previous Trac-Com accessories, the latest Trac-Com V4 is now available including a USB-A to USB-C Cable and Case for all your Trac-Com accessories.  What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.  Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.  The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.  Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.  Don’t have time to charge it? Insert a 9V battery, and you’ll add 30 minutes of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.  Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.  Trac-Com V4 Base Unit Details:  Dual Independent Volume Controls  LCD Screen  Dual Battery System Built-in 1500 mAh Li-Ion Battery - Rechargeable via USB-C Port  Replaceable 9V Battery  Locking headset connectors  CE and RoHS-compliant  Weight w/ 9V: 3.6oz  Weight w/o 9V: 5.23 oz  Size: L 4.4" W 2.66" H 1.20"  Trac-Com V4 Base Unit Operating Instructions: Power On/Off:  Press and hold the power button for 3 seconds Pressing the button temporarily will illuminate the screen but will not power cycle the unit  Adjusting Volume:  Both users have an individual volume control located on each side of the unit.  The volume is adjustable from 0 to 12 using the press + or - buttons.  Listening to loud volumes can permanently affect your hearing. This device is capable of creating sound that is loud enough to cause harm. Please use caution while using the Trac-Com V4  Connecting Headsets:  Insert the male connector found on the Trac-Com accessory into either female port on top of the Trac-Com V4, making sure to line up the notch on the male connector with the indentation on the female port.  To disconnect a headset, press and hold the black button on the male connector while pulling it out of the unit.  Dual Battery System - Overview:  The Trac-Com V4 is equipped with a Dual Battery System  The Internal Battery is a 1500 mAh Li-Ion battery, rechargeable Via USB C cable  This model is also compatible with a standard 9V battery, offering supplemental power.  The Trac-Com V4 can be powered exclusively using the internal battery without a 9V installed, reducing the weight and operating cost.  9V Battery Logic:  The Trac-Com V4 will default to using the 9V battery when installed. The readout will show 4 Bars of the full battery along with a 9V icon.  As the 9V drains, the bars will drop down to zero.  The system switches to the internal battery once the 9V battery is fully depleted. When using the internal battery, the screen will show a 3.7V icon.  Charging:  The 9V battery must be removed before charging  To charge the Trac-Com V4, insert a powered USB-C cable into the unit  Charge time for the internal battery is 2 hours

Garmin Catalyst Cage Mount w/ Low-Profile Magnet Compatible with RAM mount parts This cage mount cradle for the Garmin Catalyst driving performance optimizer provides a secure fit with quick and easy one-handed attachment and removal of the Catalyst from the cradle. This mounting kit includes a 2.5” (64mm) round base with AMPS hole pattern, locking double socket arm and diamond base adapter that connects to the cage mount cradle. The Garmin Catalyst Cage Mount includes a low-profile magnetic mount that replaces the magnetic mount that ships with the Catalyst. (The Catalyst magnetic mount does not fit in this cage mount cradle.) This mount has a ball joint size of 1.0” (25.4 mm). In the Box: Cage with assembly hardware Low-profile magnetic mount 2.5” round base with AMPS hole pattern Locking double socket arm Diamond base adapter that connects to the cage mount cradle Note: This is not designed as a roll cage mount.

AMT Ultra-Low Seat Mount For Corvette C5 Through C8 Sub Strap Mount Included The Best Way to Put Proper Seats in Your Corvette Throughout the years, the iconic Corvette has been equipped from the factory with many great features. Unfortunately, the seats aren't one of them. Those Corvette drivers who have added a proper racing seat to their Corvette often say it's the most important mod they've made to increase their track-day enjoyment and safety. However, a proper racing seat should be mounted from the side on fixed mounts, not using the OEM seat hardware. As a result, headroom becomes a concern with any racing seat in a Corvette, but AMT Motorsports has effectively eliminated that concern with the Ultra-Low Seat Mount. The Benefit of Innovative Design Countless development hours were spent making the Ultra-Low Seat Mount the best available for the Corvette. (The only way to get your seat lower in your car is to cut a hole in it!) The bottom of the seat can literally touch the floor in your Corvette. By machining a perfect hex in the mounts to accept the mounting bolts for the side brackets, AMT maximizes seat clearance. This machined hex also removes an extra wrench (and a whole lot of headache) from the install process. These seat mounts are machined from 6061-T6 extruded aluminum. Rather than allow the side brackets to only sit on bolts, AMT machines the brackets so there's a perfect mechanical interface with the bottom and side of each floor mount, increasing stiffness and strength. Included with every mount are studs and hardware to allow the mount to be bolted using the factory Corvette seat studs. Sub Strap Bar Included Finally, there's a movable cross bar to accept five- and six-point sub straps. This sub-strap bar is bolted to the floor mounts with flat head screws, and there are two more holes in the cross bar in case your sanctioning body requires you to bolt the bar through the floor. Two eye-bolts are included with the cross bar. We don't recommend using a different sub-strap bar with the AMT mount since you'll need to modify either the mount or the sub-strap bar to get it to fit. Lifetime Guaranteed Quality As with everything AMT makes, these mounts and sub-strap bars are proudly 100% made in the USA. If any part of the mount fails for any reason, AMT Motorsport will replace the offending part free of charge.

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

Trac-Com Foam Earbuds For the purpose of hygiene and safety, this product is not eligible for return. Experience professional style communication while racing with Trac-Com Foam Earbuds. These earbuds are designed specifically for racers, providing clear and comfortable hearing during intense races. When paired with the Trac-Com Pro Helmet Kit, these foam earbuds offer top-notch communication capabilities, allowing you to stay connected with your team and receive important instructions without any distractions. Trac-Com Foam Earbud Features Structured for optimal fit and comfort Clear and crisp sound quality Compatible with Trac-Com Pro Helmet Kit Don't let poor communication hinder your performance on the track. Upgrade to Trac-Com Foam Earbuds and experience the difference in your racing experience. Order now and take your racing game to the next level!

36-Inch Stilo to Chatterbox 3.5mm Helmet Cable This cable can be used to connect several types of devices to your Stilo helmet. Includes 3.5mm (1/8") right angle 4C male connector on one end and Stilo 4C male connector on the other. Made in the USA from thin ROHS-compliant cable, durability tested for the ultimate in strength and reliability. Stilo to Chatterbox 3.5mm Helmet Cable Details: Manufacturer: RaceCom Manufacturer part number: R CB STILO36 Connects to Chatterbox Tandem Pro 2, Chatterbox DUO Connects to any cell phone with a 3.5mm (1/8") female headphone jack

Stand21 Porsche Motorsport Helmet & HNR Bag Officially-Licensed Porsche Motorsport helmet and head and neck restraint carry bag. Constructed from durable tear- and puncture-resistant polyester, this premium Porsche Motorsport logo bag safely carries one helmet plus one or two head-and-neck restraints (depending on the size/model). Lined in soft material with reinforced seams for durability, there's no better way for the Porsche racing enthusiast to tote helmet and HANS.

Bell M8 Sport Racing Helmet – Snell SA2025 Certified The Bell M8 Sport Racing Helmet SA2025 combines classic Bell Racing design, outstanding visibility, superior ventilation, and dependable motorsport protection in a versatile full-face helmet built for drivers of all experience levels. Designed for road racing, endurance racing, club competition, HPDE, and track-day applications, the Bell M8 Sport features a lightweight composite shell, advanced multi-density impact liner, and an exceptionally large eyeport that provides an expanded field of vision. Certified to Snell SA2025, the M8 Sport delivers current-generation automotive racing helmet protection with the comfort and functionality drivers expect from Bell Racing. Its spacious eyeport is especially beneficial for drivers who wear eyeglasses, while the direct-flow chin bar ventilation and manually adjustable upper air intakes help maintain comfort during demanding driving sessions. With integrated channels for optional communications and hydration equipment, factory-installed M6 FHR mounting terminals, and Bell's SRV-8 shield system, the M8 Sport provides exceptional versatility at an accessible price. Bell M8 Sport SA2025 Helmet Key Features Snell SA2025 Certified: Meets the current Snell automotive racing helmet safety standard. Lightweight Composite Shell: Designed to deliver durable protection while maintaining comfortable weight. Advanced Multi-Density Impact Liner: Multi-piece energy-absorbing construction engineered for impact performance. Extra-Large Eyeport: Provides exceptional peripheral visibility and additional space for eyeglasses. Direct-Flow Chin Bar Ventilation: Channels incoming air through the front of the helmet. Adjustable Upper Air Intakes: Manual lever vents can be opened or closed according to driver preference. Integrated Communication Channels: Built-in facepiece routing provisions accommodate compatible radio equipment. Hydration System Ready: Designed for compatible optional drinking tube installations. Bell SRV-8 Shield System: Uses compatible SRV-8 racing shields and SRV-1 pivot hardware. Synthetic Rubber Eyeport Gasket: Helps reduce dust, dirt, and water entering around the shield. Factory-Installed M6 Terminals: Provides mounting points for approved HANS and FHR anchors. Extended Helmet Size Range: Offers one of Bell Racing's broadest size selections. Fire-Resistant Interior: Dark Grey high-strength, high-comfort FR fabric. Optional Interior Colors: Selected alternative colors available through compatible manufacturer configurations. Optional Racing Accessories: Compatible shields, tear-offs, spoilers, and ventilation accessories available separately. Two Exterior Colors: Gloss White and Matte Black. Extra-Large Eyeport for Outstanding Driver Visibility One of the defining features of the Bell M8 Sport is its exceptionally large eyeport. The expanded opening provides a wide field of vision, allowing drivers to better monitor surrounding traffic, mirrors, corner workers, and cockpit instruments. Compared with helmets featuring narrower racing eyeports, the M8 Sport provides additional visual space that can be particularly useful in closed-cockpit race cars and during wheel-to-wheel competition. The large eyeport also makes the M8 Sport an excellent option for drivers who wear prescription eyeglasses while racing. For drivers who prioritize visibility and a less restrictive viewing area, the Bell M8 Sport is one of the most versatile full-face helmets in Bell's Sport Series. Designed for Drivers Who Wear Eyeglasses Finding a racing helmet that comfortably accommodates eyeglasses can be challenging. The Bell M8 Sport addresses this concern with a larger-than-average eyeport that provides additional clearance for many eyewear styles. This design helps drivers put on and remove eyeglasses while wearing the helmet and provides an expanded viewing area during driving. Eyeglass compatibility depends on the shape and size of the frames, so drivers should test their glasses with the helmet whenever possible. For racers requiring prescription eyewear, the M8 Sport offers a practical combination of comfort, visibility, and motorsport protection. Snell SA2025 Certified Racing Protection The Bell M8 Sport is certified to Snell SA2025, the current Snell automotive racing helmet standard. The certification establishes testing requirements for impact protection and other protective characteristics appropriate to automotive motorsport. The M8 Sport is suitable for qualifying road racing, club racing, time trial, driving school, and track-day applications that accept Snell SA2025 certification. Important: Bell lists the M8 Sport with Snell SA2025 certification. FIA 8859 homologation is not specified for this model. Always verify the requirements of your racing organization before purchasing. Lightweight Composite Shell Construction The Bell M8 Sport features a lightweight composite outer shell engineered to provide structural strength and reliable protection without unnecessary weight. The composite construction works with the helmet's advanced multi-density impact liner to help absorb and distribute impact energy. This construction makes the M8 Sport an attractive alternative to more expensive full-carbon racing helmets while maintaining the protection required by its Snell SA2025 certification. For drivers participating in extended track sessions, a comfortable helmet with an effective fit can help reduce fatigue and improve concentration. Advanced Multi-Density Impact Liner Inside the Bell M8 Sport is an advanced multi-density, multi-piece impact liner designed to maximize energy absorption and impact performance. The protective liner works together with the composite shell to manage impact forces during a motorsport incident. A properly fitted helmet is essential for the liner and shell to function as intended. The helmet should remain securely positioned around the head without excessive movement or uncomfortable pressure points. Superior Ventilation With Adjustable Air Intakes The Bell M8 Sport incorporates a versatile ventilation system designed to improve airflow and driver comfort. Direct-flow front chin bar vents help introduce cooling air into the helmet, while upper intake vents provide additional ventilation. The upper air intakes feature manually operated levers that allow drivers to open or close the ventilation openings depending on the conditions. These adjustments are useful during changing weather, cool morning sessions, and warm-weather endurance events. The adjustable ventilation arrangement makes the M8 Sport adaptable to different racing environments without requiring a permanent modification to the helmet. Bell SRV-8 Racing Shield and SRV-1 Pivot System The Bell M8 Sport uses the Bell SRV-8 shield system with compatible SRV-1 pivot hardware. The large shield complements the helmet's oversized eyeport, providing excellent visibility through the front opening. Replacement SRV-8 shields are available separately in selected finishes and configurations, allowing drivers to tailor their setup to different lighting conditions. Compatible tear-off films can also be installed to help manage dirt, rubber debris, and other contaminants during racing. The SRV-1 pivot system provides the mounting hardware required for compatible Bell racing shields. Always use approved replacement shields and hardware designed specifically for the Bell M8 Sport. Synthetic Rubber Gasket for Dirt and Water Resistance The Bell M8 Sport incorporates a synthetic rubber gasket around the shield opening. The gasket helps create a seal between the helmet shell and the shield when properly closed. This design helps reduce dirt, dust, and water entering around the eyeport during changing track conditions. Regular inspection of the gasket and shield hardware helps maintain proper operation and visibility. Integrated Racing Radio and Communication Compatibility The Bell M8 Sport includes integrated channels within the facepiece to accommodate compatible communications equipment. These channels provide routing options for selected racing radio systems and communication accessories. Communication compatibility is particularly useful for endurance racing, club racing, and other motorsport disciplines where drivers rely on instructions from the pit crew. The integrated routing provisions help simplify accessory installation without requiring unnecessary modifications to the protective helmet shell. Note: Radio systems, microphones, speakers, and communication equipment are sold separately. Hydration System Compatibility for Endurance Racing Extended track sessions and endurance racing can create demanding conditions for drivers. The Bell M8 Sport features integrated facepiece channels that allow compatible hydration equipment to be routed through the helmet. Drivers can install suitable drinking tubes and hydration accessories to support fluid intake during extended driving sessions. The routing options provide additional flexibility when configuring the helmet around a specific race car and driver setup. Important: Hydration equipment is optional and is not included with the standard M8 Sport helmet. Factory-Installed M6 HANS and FHR Mounting Terminals The Bell M8 Sport comes equipped with factory-installed M6 threaded terminals for compatible frontal head restraint anchors. These mounting provisions allow approved HANS/FHR anchor hardware to be installed without modifying the protective shell. The system supports use with compatible head-and-neck restraint equipment required by many motorsport sanctioning organizations. Important: The M6 mounting terminals are included, but HANS/FHR anchor clips are sold separately. Always use approved anchor components and follow the manufacturer's installation instructions. One of Bell Racing's Widest Helmet Size Ranges The Bell M8 Sport offers one of the broadest helmet size ranges available in the Bell Racing product lineup. Its expanded size selection makes the M8 Sport an excellent option for drivers who have difficulty finding a properly fitted helmet in conventional size ranges. Bell offers the M8 Sport in manufacturer size ranges starting at 54-55 and extending through 67-68, subject to inventory availability. To select the correct size, measure the circumference of your head around the widest point, approximately one inch above your eyebrows. Take several measurements to ensure accuracy and compare the results with Bell's official helmet sizing recommendations. Helmet fit should be snug and secure without creating uncomfortable pressure points. A professional fitting is recommended whenever possible. Fire-Resistant Interior and Comfort Features The Bell M8 Sport features a Dark Grey high-strength, high-comfort fire-resistant interior designed for competitive motorsport use. The interior provides supportive contact around the head while maintaining comfort throughout demanding track sessions. Bell also offers selected alternative interior color configurations, including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Alternative interior configurations may require special ordering and are subject to manufacturer availability. Ideal for Road Racing, HPDE and Endurance Competition The Bell M8 Sport is designed to accommodate a wide variety of motorsport applications. Its combination of visibility, ventilation, accessory compatibility, and extended sizing makes it suitable for drivers participating in: Road Racing Club Racing GT and Touring Car Racing Endurance Racing High-Performance Driving Events Track Days Time Trials Driving Schools Autocross Events Requiring SA-Rated Helmets Event eligibility depends on the helmet certification requirements of the specific organization or series. Bell M8 Sport SA2025 Technical Specifications Manufacturer: Bell Racing Helmets Model: M8 Sport Series: Bell Sport Series Helmet Type: Full-Face Auto Racing Helmet Certification: Snell SA2025 Shell Material: Lightweight Composite Impact Liner: Advanced Multi-Density, Multi-Piece Construction Exterior Colors: Gloss White and Matte Black Standard Interior: Dark Grey High-Strength, High-Comfort FR Fabric Alternative Interior Colors: Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange Eyeport: Extra-Large Eyeport for Enhanced Visibility Eyeglass Friendly: Yes, Subject to Eyewear Fit Ventilation: Direct-Flow Chin Bar and Upper Adjustable Air Intakes Upper Vent Control: Manual Open/Close Levers Shield System: Bell SRV-8 Shield Pivot Kit: Bell SRV-1 Eyeport Gasket: Synthetic Rubber Communication Ready: Yes, With Optional Equipment Hydration Compatible: Yes, With Optional Equipment FHR Mounting: Factory-Installed M6 Terminals HANS/FHR Anchor Clips: Sold Separately Manufacturer Size Ranges: 54-55, 55-56, 57-58, 58-59, 60-61, 61-61+, 63-64, 65-66, 67-68 Primary Applications: Road Racing, Club Racing, Endurance Racing, HPDE, Time Trials, and Track Days Quantity: Sold Individually Compatible Bell M8 Sport Racing Helmet Accessories The Bell M8 Sport supports a selection of genuine Bell Racing accessories for enhanced visibility, comfort, and functionality. Bell SRV-8 Replacement Helmet Shields Bell SRV-8 Double Screen Anti-Fog Replacement Shields Bell SRV-1 Shield Pivot Kits Compatible Racing Optics Tear-Off Films Bell HANS/FHR Anchor Clip Sets Compatible Bell Rear Racing Spoilers Selected Forced-Air Ventilation Accessories Racing Communication Equipment Driver Hydration Accessories Protective Racing Helmet Bags Always verify accessory compatibility with the Bell M8 Sport SA2025 before ordering. Bell M.8 Helmet SA2025 Sizing Chart  Bell M8 Sport Helmet Care and Maintenance Proper care and routine inspection help maintain the performance, comfort, and condition of your Bell M8 Sport racing helmet. Exterior Care: Bell racing helmets use a durable polyurethane exterior coating designed to resist scratching. Clean the shell with a soft microfiber cloth and appropriate products suitable for automotive finishes. Avoid solvent-based or abrasive cleaners. Interior Care: Use mild soap and water with a clean cloth to gently hand-clean the interior fit padding according to Bell Racing's instructions. Drying: Allow the helmet to dry thoroughly after exposure to moisture or perspiration before placing it into storage. Shield Care: Clean the shield with approved visor-safe products and inspect for cracks, scratches, or damaged pivot hardware. Ventilation Maintenance: Inspect the chin bar and adjustable upper vents for dirt, debris, or damaged operating mechanisms. Hardware Inspection: Check the chin strap, shield pivots, and installed FHR anchors before every driving event. Storage: Store the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Bell M8 Sport SA2025 Helmet FAQs Is the Bell M8 Sport Snell SA2025 certified? Yes. The current Bell M8 Sport carries Snell SA2025 certification for applicable automotive motorsport applications. Is the M8 Sport FIA 8859 certified? Bell lists the M8 Sport SA2025 with Snell certification. FIA 8859 homologation is not specified for this model. What makes the Bell M8 Sport different from other racing helmets? The M8 Sport features an exceptionally large eyeport, versatile ventilation, and one of Bell Racing's broadest helmet size ranges. Is the Bell M8 Sport good for drivers who wear glasses? Yes. The extra-large eyeport provides additional clearance for many eyeglass styles, although actual compatibility depends on the frames and individual fit. What is the Bell M8 Sport shell made from? The helmet uses lightweight composite shell construction. Can I adjust the helmet ventilation? Yes. The upper intake vents feature manual levers that allow drivers to open or close the ventilation openings. What shield fits the Bell M8 Sport? The M8 Sport uses Bell SRV-8 replacement shields and compatible SRV-1 pivot hardware. Can I add tear-offs to the shield? Yes. Compatible tear-off film systems are available for the Bell SRV-8 shield. Does the Bell M8 Sport include HANS anchors? The helmet includes M6 threaded mounting terminals. Compatible HANS/FHR anchor clips are sold separately. Can I install a racing radio system? Yes. Integrated facepiece channels provide routing options for compatible optional communication equipment. Can I install a drink tube? Yes. The M8 Sport includes provisions for compatible driver hydration systems. What sizes are available? Bell offers nine manufacturer size ranges from 54-55 through 67-68, subject to inventory availability. What colors are available? The Bell M8 Sport is offered in Gloss White and Matte Black. What interior comes standard? The standard interior is Dark Grey high-strength, high-comfort fire-resistant fabric. Is the M8 Sport suitable for endurance racing? Yes. Its extra-large eyeport, ventilation, and optional communication and hydration provisions make it well suited for endurance racing when Snell SA2025 certification is accepted. What is the difference between the M8 Sport and M8 Ultra? The M8 Sport features a lightweight composite shell and Sport Series interior, while the M8 Ultra uses carbon shell construction and offers a higher-end configuration. Is the M8 Sport suitable for beginners? Yes. Its versatile design, affordable price, and broad size range make it an excellent option for both entry-level and experienced drivers. Exceptional Visibility and Value With the Bell M8 Sport SA2025 The Bell M8 Sport Racing Helmet SA2025 delivers outstanding visibility, dependable protection, versatile ventilation, and broad sizing options in a classic Bell Racing design. With its lightweight composite shell, Snell SA2025 certification, oversized eyeport, adjustable air intakes, SRV-8 shield system, and integrated provisions for optional communications and hydration, the M8 Sport offers the features serious drivers need without premium carbon helmet pricing. Choose the Bell M8 Sport SA2025 for an exceptional combination of comfort, visibility, versatility, and race-ready value.

Allstar Performance SFI 45.1 Roll Bar Padding Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications. Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging from  1.25 inches to 1.75 inches in diameter. Allstar Performance Roll Bar Padding Details: Manufacturer: Allstar Performance Thickness: 0.75 inches Length: sold in individual 36-inch lengths Maximum Bar Diameter: 1.75 inches Minimum Bar Diameter: 1.25 inches Certification: SFI 45.1 Attachment: attaches to roll bar with adhesive backing

OMP FIRST-S Racing Driver Suit The OMP FIRST-S Racing Driver Suit is a revised entry-level FIA-homologated racing suit designed for drivers who want dependable protection, comfort, and classic OMP styling at an approachable price point. Updated with lightweight fabrics and improved construction, the FIRST-S delivers the safety and mobility needed for track days, club racing, HPDE, and competitive motorsport. Certified to the FIA 8856-2018 homologation standard, the OMP FIRST-S uses a two-layer construction with a durable fire-retardant exterior and a soft knitted inner layer for improved comfort during long sessions in the car. Ultra-flat internal seams help reduce rubbing, while the elastic knitted lower-back insert improves flexibility and driver comfort in a seated driving position. Lightweight Two-Layer FIA Protection The OMP FIRST-S Racing Suit is built around a lightweight and breathable two-layer design. At 385 g/m², this updated version is lighter than previous FIRST-S models while still maintaining the durability and protective performance drivers expect from OMP. Improved Comfort and Mobility Full-floating arms with elastic bellows allow greater freedom of movement behind the wheel, helping reduce resistance while steering, shifting, and entering or exiting the car. The modern fishbone quilting pattern is designed to better match the driver's ergonomics in a seated racing position, giving the suit a clean professional look while improving overall comfort. OMP FIRST-S Racing Driver Suit Features FIA 8856-2018 homologated racing suit Lightweight and breathable two-layer construction Durable fire-retardant outer material Soft knitted inner layer for driver comfort Full-floating arms for improved mobility Elastic bellows for reduced restriction while driving Ultra-flat anti-rubbing internal seams Elastic knitted lower-back insert for comfort and flexibility Modern fishbone quilting pattern Classic OMP fit and styling Weight: 385 g/m² Why Choose the OMP FIRST-S Racing Driver Suit? The OMP FIRST-S is an excellent choice for drivers looking for an FIA 8856-2018 race suit that balances safety, comfort, and value. With its lighter construction, improved mobility, and trusted OMP build quality, the FIRST-S is a strong option for racers moving into FIA-rated gear or anyone looking to upgrade from older safety equipment. OMP FIRST-S Racing Driver Suit FAQs Is the OMP FIRST-S Racing Driver Suit FIA approved?Yes. The OMP FIRST-S Racing Driver Suit is certified to the FIA 8856-2018 homologation standard. How many layers does the OMP FIRST-S suit have?The OMP FIRST-S uses a lightweight two-layer construction with a fire-retardant outer shell and soft knitted inner layer. Is the OMP FIRST-S lighter than the previous version?Yes. The revised FIRST-S uses updated lightweight fabrics and weighs 385 g/m². Does the OMP FIRST-S have floating arms?Yes. The suit features full-floating arms with elastic bellows for improved range of motion while driving. Who is the OMP FIRST-S Racing Driver Suit best for?The FIRST-S is ideal for drivers who need an FIA 8856-2018 homologated suit with  comfortable two-layer protection, classic styling, and strong value. OMP FIRST-S Driver Race Suit Sizing Chart

Titanium Wheel Lug Bolts for BMW Fits All Modern BMWs with 12x1.50 or 14x1.25 Bolts Competition Motorsport Titanium Lug Bolts come in sets of 10 for your BMW. They are machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength exceptionally light weight (45% lighter than high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for for superior strength, precision, and durability. Titanium Bolts in OEM and Plus Lengths For Wheel Spacers OEM lengths are used for cars with no added wheel spacers. Longer sizes are available for those using wheel spacers. Just choose the thickness of your spacers and we'll size the appropriate titanium lug bolts. Titanium Lug Bolt Details Grade 5 Ti-6AL-4V Titanium Alloy: Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion Low heat conductivity. Note: Competition Motorsport Titanium Lug Bolts for BMW are sold in sets of ten (10) lug bolts. Two sets of lug bolts are required for one complete car.